UNITED STATES SECURITIES AND EXCHANGE COMMISSION

 

Washington, D.C. 20549

 

Form 10-K

 

 

For the fiscal year ended December 31, 2007

 

of

 

AGCO CORPORATION

 

A Delaware Corporation

IRS Employer Identification No. 58-1960019

SEC File Number 1-12930

 

 

4205 River Green Parkway
Duluth, GA 30096
(770) 813-9200

 

 

AGCO Corporation’s Common Stock and Junior Preferred Stock purchase rights are registered pursuant to Section 12(b) of the Act and are listed on the New York Stock Exchange.

 

AGCO Corporation is a well-known seasoned issuer.

 

AGCO Corporation is required to file reports pursuant to Section 13 or Section 15(d) of the Act. AGCO Corporation (1) has filed all reports required to be filed by Section 13 or 15(d) of the Act during the preceding 12 months, and (2) has been subject to such filing requirements for the past 90 days.

 

Disclosure of delinquent filers pursuant to Item 405 of Regulation S-K will be contained in a definitive proxy statement, portions of which are incorporated by reference into Part III of this Form 10-K.

 

The aggregate market value of AGCO Corporation’s Common Stock (based upon the closing sales price quoted on the New York Stock Exchange) held by non-affiliates as of June 30, 2007 was approximately $2.3 billion. For this purpose, directors and officers have been assumed to be affiliates. As of February 15, 2008, 91,611,895 shares of AGCO Corporation’s Common Stock were outstanding.

 

AGCO Corporation is a large accelerated filer.

 

AGCO Corporation is not a shell company.

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Portions of AGCO Corporation’s Proxy Statement for the 2008 Annual Meeting of Stockholders are incorporated by reference into Part III of this Form 10-K.

 

 

PART I

 

 

AGCO Corporation (“AGCO,” “we,” “us,” or the “Company”) was incorporated in Delaware in April 1991. Our executive offices are located at 4205 River Green Parkway, Duluth, Georgia 30096, and our telephone number is 770-813-9200. Unless otherwise indicated, all references in this Form 10-K to the Company include our subsidiaries.

 

General

 

We are the third largest manufacturer and distributor of agricultural equipment and related replacement parts in the world based on annual net sales. We sell a full range of agricultural equipment, including tractors, combines, self-propelled sprayers, hay tools, forage equipment and implements and a line of diesel engines. Our products are widely recognized in the agricultural equipment industry and are marketed under a number of well-known brand names, including: AGCO^®, Challenger^®, Fendt^®, Gleaner^®, Hesston^®, Massey Ferguson^®, RoGator^®, Spra-Coupe^®, Sunflower^®, Terra-Gator^®, Valtra^® and White^tm Planters. We distribute most of our products through a combination of approximately 3,000 independent dealers and distributors in more than 140 countries. In addition, we provide retail financing in the United States, Canada, Brazil, Germany, France, the United Kingdom, Australia, Ireland and Austria through our finance joint ventures with Coöperatieve Centrale Raiffeisen-Boerenleenbank B.A., which we refer to as “Rabobank.”

 

Since our formation, we have grown substantially through a series of over 20 acquisitions. We have been able to expand and strengthen our independent dealer network, introduce new and updated products and expand into new markets to meet the needs of our customers. We also have identified areas of our business in which we can decrease excess manufacturing capacity and eliminate duplication in administrative, sales, marketing and production functions. In addition, we have continued to focus on strategies and actions to improve our current distribution network, improve our product offerings, reduce the cost of our products and improve asset utilization.

 

Products

 

Tractors

 

Our compact tractors (under 40 horsepower) are sold under the AGCO, Challenger and Massey Ferguson brand names and typically are used on small farms and in specialty agricultural industries, such as dairies, landscaping and residential areas. We also offer a full range of tractors in the utility tractor category (40 to 100 horsepower), including two-wheel and all-wheel drive versions. We sell utility tractors primarily under the AGCO, Challenger, Fendt, Massey Ferguson and Valtra brand names. Utility tractors typically are used on small and medium-sized farms and in specialty agricultural industries, including dairies, livestock, orchards and vineyards. In addition, we offer a full range of tractors in the high horsepower segment (primarily 100 to 570 horsepower). High horsepower tractors typically are used on larger farms and on cattle ranches for hay production. We sell high horsepower tractors under the AGCO, Challenger, Fendt, Massey Ferguson and Valtra brand names. Tractors accounted for approximately 68% of our net sales in 2007, 67% in 2006 and 66% in 2005.

 

Combines

 

We sell combines primarily under the Gleaner, Massey Ferguson, Fendt, Valtra and Challenger brand names. Depending on the market, our combines are sold with conventional or rotary technology. All combines are complemented by a variety of crop-harvesting heads, available in different sizes, that are designed to maximize harvesting speed and efficiency while minimizing crop loss. Combines accounted for approximately 5% of our net sales in 2007, 4% in 2006 and 5% in 2005.

 

In September 2007, we acquired 50% of Laverda S.p.A. (“Laverda”), thereby creating an operating joint venture between AGCO and the Italian ARGO group. Laverda is located in Breganze, Italy and manufactures

harvesting equipment. In addition to producing Laverda branded combines, the Breganze factory has been manufacturing mid-range combine harvesters for our Massey Ferguson, Fendt and Challenger brands for distribution in Europe, Africa and the Middle East since 2004. The joint venture also includes Laverda’s ownership in Fella-Werke GMBH (“Fella”), a German manufacturer of grass and hay machinery, and its 50% ownership in Gallignani S.p.A. (“Gallignani”), an Italian manufacturer of balers. The addition of the Fella and Gallignani product lines enables us to provide a comprehensive harvesting offering to our customers.

 

Application Equipment

 

We offer self-propelled, three- and four-wheeled vehicles and related equipment for use in the application of liquid and dry fertilizers and crop protection chemicals. We manufacture chemical sprayer equipment for use both prior to planting crops, known as pre-emergence, and after crops emerge from the ground, known as post-emergence, primarily under the RoGator, Terra-Gator, Spra-Coupe and Challenger brand names. We also manufacture related equipment, including vehicles used for waste application that are specifically designed for subsurface liquid injection and surface spreading of biosolids, such as sewage sludge and other farm or industrial waste that can be safely used for soil enrichment. Application equipment accounted for approximately 4% of our net sales in 2007, 5% in 2006 and 6% in 2005.

 

Hay Tools and Forage Equipment, Implements and Other Products

 

We sell hay tools and forage equipment primarily under the Hesston, Massey Ferguson, Challenger, Fendt and AGCO brand names. Hay and forage equipment includes both round and rectangular balers, self-propelled windrowers, disc mowers, spreaders and mower conditioners and are used for the harvesting and packaging of vegetative feeds used in the beef cattle, dairy and horse industries.

 

We also distribute a wide range of implements, planters and other equipment for our product lines. Tractor-pulled implements are used in field preparation and crop management. Implements include: disc harrows, which improve field performance by cutting through crop residue, leveling seed beds and mixing chemicals with the soil; heavy tillage, which breaks up soil and mixes crop residue into topsoil, with or without prior discing; and field cultivators, which prepare a smooth seed bed and destroy weeds. Tractor-pulled planters apply fertilizer and place seeds in the field. Other equipment primarily includes loaders, which are used for a variety of tasks including lifting and transporting hay crops. We sell implements, planters and other products primarily under the Hesston, Massey Ferguson, White Planters, Sunflower and Fendt brand names. In September 2007, we acquired Industria Agricola Fortaleza Limitada (“SFIL”), a Brazilian company located in Ibirubá, Rio Grande do Sul, Brazil that manufactures and distributes a line of farm implements including drills, planters, corn headers and front loaders. The addition of this line of implements will allow us to leverage the strength of our brands and our dealer networks in the South American region.

 

We provide a variety of precision farming technologies that are developed, manufactured, distributed and supported on a worldwide basis. These technologies provide farmers with the capability to enhance productivity on the farm by utilizing satellite global positioning systems, or GPS. Farmers use the Fieldstar^® precision farming system to gather information such as yield data to produce yield maps for the purpose of developing application maps. Many of our tractors, combines, planters, sprayers, tillage equipment and other application equipment are equipped to employ the Fieldstar system at the customer’s option. Our SGIS^tm software converts a variety of agricultural data to provide application plans to enhance crop yield and productivity. Our Auto-Guide^® satellite navigation system assists parallel steering to avoid the under and overlap of planting rows to optimize land use and allows for more precise farming procedures from cultivation to product application. While these products do not generate significant revenues, we believe that these products and related services are complementary and important to promote our machinery sales.

 

Our SisuDiesel^tm engines division produces diesel engines, gears and generating sets for use in Valtra tractors and certain of our other equipment and for sale to third parties. The engine division specializes in the manufacturing of off-road engines in the 50 to 450 horsepower range.

 

Hay tools and forage equipment, implements, engines and other products accounted for approximately 10% of our net sales in 2007, 2006 and 2005.

Replacement Parts

 

In addition to sales of new equipment, our replacement parts business is an important source of revenue and profitability for both us and our dealers. We sell replacement parts, many of which are proprietary, for products sold under all of our brand names. These parts help keep farm equipment in use, including products no longer in production. Since most of our products can be economically maintained with parts and service for a period of ten to 20 years, each product that enters the marketplace provides us with a potential long-term revenue stream. In addition, sales of replacement parts typically generate higher gross profits and historically have been less cyclical than new product sales. Replacement parts accounted for approximately 13% of our net sales in 2007, 14% in 2006 and 13% in 2005.

 

Marketing and Distribution

 

We distribute products primarily through a network of independent dealers and distributors. Our dealers are responsible for retail sales to the equipment’s end user in addition to after-sales service and support of the equipment. Our distributors may sell our products through a network of dealers supported by the distributor. Through our acquisitions and dealer development activities, we have broadened our product lines, expanded our dealer network and strengthened our geographic presence in Europe, North America, South America and the other markets around the world. Our sales are not dependent on any specific dealer, distributor or group of dealers. We intend to maintain the separate strengths and identities of our core brand names and product lines.

 

Europe

 

We market and distribute farm machinery, equipment and replacement parts to farmers in European markets through a network of approximately 1,200 independent Massey Ferguson, Fendt, Valtra and Challenger dealers and distributors. In certain markets, we also sell Valtra tractors and parts directly to the end user. In some cases, dealers carry competing or complementary products from other manufacturers. Sales in Europe accounted for approximately 57% of our net sales in 2007 and 2006 and 50% in 2005.

 

North America

 

We market and distribute farm machinery, equipment and replacement parts to farmers in North America through a network of approximately 1,200 independent dealers, each representing one or more of our brand names. Dealers may also sell competitive and dissimilar lines of products. A portion of our RoGator and Terra-Gator sprayer brands sales are made directly to end customers, often to fertilizer and chemical suppliers. Sales in North America accounted for approximately 22% of our net sales in 2007, 24% in 2006 and 29% in 2005.

 

South America

 

We market and distribute farm machinery, equipment and replacement parts to farmers in South America through several different networks. In Brazil and Argentina, we distribute products directly to approximately 400 independent dealers, primarily supporting the Massey Ferguson, Valtra and Challenger brand names. In Brazil, dealers are generally exclusive to one manufacturer. Outside of Brazil and Argentina, we sell our products in South America through independent distributors. Sales in South America accounted for approximately 16% of our net sales in 2007 and 12% in 2006 and 2005.

 

Rest of the World

 

Outside Europe, North America and South America, we operate primarily through a network of approximately 200 independent Massey Ferguson, Fendt, Valtra and Challenger dealers and distributors, as well as associates and licensees, marketing our products and providing customer service support in approximately 85 countries in Africa, the Middle East, Australia and Asia. With the exception of Australia and New Zealand, where we directly support our dealer network, we generally utilize independent distributors, associates and licensees to sell our products. These arrangements allow us to benefit from local market

expertise to establish strong market positions with limited investment. Sales outside Europe, North America and South America accounted for approximately 5% of our net sales in 2007, 7% in 2006 and 9% in 2005.

 

Associates and licensees provide a significant distribution channel for our products and a source of low-cost production for certain Massey Ferguson and Valtra products. Associates are entities in which we have an ownership interest, most notably in India. Licensees are entities in which we have no direct ownership interest, most notably in Pakistan and Turkey. The associate or licensee generally has the exclusive right to produce and sell Massey Ferguson and Valtra equipment in its home country but may not sell these products in other countries. We generally license to these associates certain technology, as well as the right to use the Massey Ferguson and Valtra trade names. We also sell products to associates and licensees in the form of components used in local manufacturing operations, tractor kits supplied in completely knocked down form for local assembly and distribution, and fully assembled tractors for local distribution only. In certain countries, our arrangements with associates and licensees have evolved to where we principally provide technology, technical assistance and quality control. In these situations, licensee manufacturers sell certain tractor models under the Massey Ferguson and Valtra brand names in the licensed territory and also may become a source of low-cost production for us.

 

During 2006, we established a joint venture located in Russia for the purpose of distributing Fendt and Valtra branded equipment throughout Russia and Kazakhstan. During 2007, we became the sole owners of the joint venture by acquiring the remaining ownership interest from our Russian joint venture partners.

 

Parts Distribution

 

Parts inventories are maintained and distributed in a network of master and regional warehouses throughout North America, South America, Western Europe and Australia in order to provide timely response to customer demand for replacement parts. Our primary Western European master distribution warehouses are located in Desford, United Kingdom; Ennery, France; and Suolahti, Finland; and our North American master distribution warehouses are located in Batavia, Illinois and Kansas City, Missouri. Our South American master distribution warehouses are located in Mogi das Cruzes, Brazil; Canoas, Rio Grande do Sul, Brazil; Sumaré, São Paulo, Brazil; and Haedo, Argentina.

 

Dealer Support and Supervision

 

We believe that one of the most important criteria affecting a farmer’s decision to purchase a particular brand of equipment is the quality of the dealer who sells and services the equipment. We provide significant support to our dealers in order to improve the quality of our dealer network. We monitor each dealer’s performance and profitability and establish programs that focus on continual dealer improvement. Our dealers generally have sales territories for which they are responsible.

 

We believe that our ability to offer our dealers a full product line of agricultural equipment and related replacement parts, as well as our ongoing dealer training and support programs focusing on business and inventory management, sales, marketing, warranty and servicing matters and products, helps ensure the vitality and increase the competitiveness of our dealer network. We also maintain dealer advisory groups to obtain dealer feedback on our operations.

 

We provide our dealers with volume sales incentives, demonstration programs and other advertising support to assist sales. We design our sales programs, including retail financing incentives, and our policies for maintaining parts and service availability with extensive product warranties to enhance our dealers’ competitive position. In general, either party may cancel dealer contracts within certain notice periods.

 

Wholesale Financing

 

Primarily in the United States and Canada, we engage in the standard industry practice of providing dealers with floor plan payment terms for their inventories of farm equipment for extended periods. The terms of our wholesale finance agreements with our dealers vary by region and product line, with fixed payment schedules on all sales, generally ranging from one to 12 months. In the United States and Canada, dealers

typically are not required to make an initial down payment, and our terms allow for an interest-free period generally ranging from six to 12 months, depending on the product. We also provide financing to dealers on used equipment accepted in trade. We retain a security interest in a majority of the new and used equipment we finance.

 

Typically, sales terms outside the United States and Canada are of a shorter duration, generally ranging from 30 to 180 days. In many cases, we retain a security interest in the equipment sold on extended terms. In certain international markets, our sales are backed by letters of credit or credit insurance.

 

For sales in most markets outside of the United States and Canada, we do not normally charge interest on outstanding receivables from our dealers and distributors. For sales to certain dealers or distributors in the United States and Canada, where we generated approximately 20% of our net sales in 2007, interest is generally charged at or above prime lending rates on outstanding receivable balances after interest-free periods. These interest-free periods vary by product and generally range from one to 12 months, with the exception of certain seasonal products, which bear interest after periods of up to 23 months that vary depending on the time of year of the sale and the dealer’s or distributor’s sales volume during the preceding year. For the year ended December 31, 2007, 12.4% and 7.6% of our net sales had maximum interest-free periods ranging from one to six months and seven to 12 months, respectively. Net sales with maximum interest-free periods ranging from 13 to 23 months were approximately 1.8% of our net sales during 2007. Actual interest-free periods are shorter than suggested by these percentages because receivables from our dealers and distributors in the United States and Canada are generally due immediately upon sale of the equipment to retail customers. Under normal circumstances, interest is not forgiven and interest-free periods are not extended. In May 2005, we completed an agreement to permit transferring, on an ongoing basis, the majority of interest-bearing receivables in North America to our United States and Canadian retail finance joint ventures. Upon transfer, the receivables maintain standard payment terms, including required regular principal payments on amounts outstanding, and interest charges at market rates. Under this arrangement, qualified dealers may obtain additional financing through our United States and Canadian retail finance joint ventures.

 

Retail Financing

 

Through our retail financing joint ventures located in the United States, Canada, Brazil, Germany, France, the United Kingdom, Australia, Ireland and Austria, end users of our products are provided with a competitive and dedicated financing source. These retail finance companies are owned 49% by us and 51% by a wholly-owned subsidiary of Rabobank. The retail finance joint ventures can tailor retail finance programs to prevailing market conditions and such programs can enhance our sales efforts.

 

Manufacturing and Suppliers

 

Manufacturing and Assembly

 

We manufacture our products in locations intended to optimize capacity, technology or local costs. Furthermore, we continue to balance our manufacturing resources with externally-sourced machinery, components and replacement parts to enable us to better control inventory and our supply of components. We believe that our manufacturing facilities are sufficient to meet our needs for the foreseeable future.

 

Europe

 

Our tractor manufacturing operations in Europe are located in Suolahti, Finland; Beauvais, France; and Marktoberdorf, Germany. In addition, we maintain a combine assembly facility in Randers, Denmark. The Suolahti facility produces 75 to 280 horsepower tractors marketed under the Valtra and Massey Ferguson brand names. The Beauvais facility produces 80 to 290 horsepower tractors marketed under the Massey Ferguson, Challenger and AGCO brand names. The Marktoberdorf facility produces 50 to 360 horsepower tractors marketed under the Fendt brand name. The Randers facility produces conventional combines under the Massey Ferguson, Challenger and Fendt brand names. We also assemble cabs for our Fendt tractors in Baumenheim, Germany. We have a diesel engine manufacturing facility in Linnavuori, Finland. As previously discussed, in September 2007, we acquired 50% of Laverda, thereby creating an operating joint venture

between AGCO and the Italian ARGO group. Laverda is located in Breganze, Italy and manufactures harvesting equipment. In addition to producing Laverda branded combines, the Breganze factory has been manufacturing mid-range combine harvesters for AGCO’s Massey Ferguson, Fendt and Challenger brands for distribution in Europe, Africa and the Middle East since 2004. We also have a joint venture with Renault Agriculture S.A. for the manufacture of driveline assemblies for tractors produced in our facility in Beauvais. By sharing overhead and engineering costs, this joint venture has resulted in a decrease in the cost of these components.

 

North America

 

Our manufacturing operations in North America are located in Beloit, Kansas; Hesston, Kansas; Jackson, Minnesota and Queretaro, Mexico. The Beloit facility produces tillage and seeding equipment under the Sunflower, Massey Ferguson, AGCO and Challenger brand names. The Hesston facility produces hay and forage equipment marketed under the AGCO, Hesston, Challenger and Massey Ferguson brand names, rotary combines under the Gleaner, Massey Ferguson and Challenger brand names, and planters under the AGCO, Massey Ferguson and White Planters brand names. The Jackson facility produces 270 to 570 horsepower track tractors and four-wheeled drive articulated tractors under the Challenger brand name and self-propelled sprayers primarily marketed under the RoGator, Terra-Gator and Spra-Coupe brand names. In Queretaro, we assemble tractors for distribution in the Mexican market under the Challenger and Massey Ferguson brand names.

 

South America

 

Our manufacturing operations in South America are located in Brazil. In Canoas, Rio Grande do Sul, Brazil, we manufacture and assemble tractors, ranging from 50 to 220 horsepower, and industrial loader-backhoes. The tractors are sold under the Massey Ferguson and AGCO brand names. In Mogi das Cruzes, Brazil, we manufacture and assemble tractors, ranging from 50 to 180 horsepower, marketed under the Valtra, Challenger and AGCO brand names. We also manufacture diesel engines in the Mogi das Cruzes facility. We manufacture combines marketed under the Massey Ferguson, Valtra and Challenger brand names in Santa Rosa, Rio Grande do Sul, Brazil. As previously discussed, in September 2007, we acquired SFIL, a Brazilian company located in Ibirubá, Rio Grande do Sul, Brazil that manufactures and distributes a line of farm implements, including drills, planters, corn headers and front loaders.

 

Third-Party Suppliers

 

We externally source many of our products, components and replacement parts. Our production strategy is intended to minimize our research and development and capital investment requirements and to allow us greater flexibility to respond to changes in market conditions.

 

We purchase some of the products we distribute from third-party suppliers. We purchase standard and specialty tractors from SAME Deutz-Fahr Group S.p.A. and Carraro S.p.A. and distribute these tractors worldwide. In addition, we purchase some tractor models from licensees in Turkey and India and compact tractors from Iseki & Company, Limited, a Japanese manufacturer. We also purchase other tractors, combines, implements and hay and forage equipment from various third-party suppliers.

 

In addition to the purchase of machinery, third-party companies supply us with significant components used in our manufacturing operations, such as engines and transmissions. We select third-party suppliers that we believe are low cost, high quality and possess the most appropriate technology. We also assist in the development of these products or component parts based upon our own design requirements. Our past experience with outside suppliers has generally been favorable.

 

Seasonality

 

Generally, retail sales by dealers to farmers are highly seasonal and are a function of the timing of the planting and harvesting seasons. To the extent practicable, we attempt to ship products to our dealers and distributors on a level basis throughout the year to reduce the effect of seasonal retail demands on our

manufacturing operations and to minimize our investment in inventory. Our financing requirements are subject to variations due to seasonal changes in working capital levels, which typically increase in the first half of the year and then decrease in the second half of the year. The fourth quarter is also typically a large period for retail sales because of our customers’ year end tax planning considerations, the increase in availability of funds from completed harvests and the timing of dealer incentives.

 

Competition

 

The agricultural industry is highly competitive. We compete with several large national and international full-line suppliers, as well as numerous short-line and specialty manufacturers with differing manufacturing and marketing methods. Our two principal competitors on a worldwide basis are Deere & Company and CNH Global N.V. In certain Western European and South American countries, we have regional competitors that have significant market share in a single country or a group of countries.

 

We believe several key factors influence a buyer’s choice of farm equipment, including the strength and quality of a company’s dealers, the quality and pricing of products, dealer or brand loyalty, product availability, the terms of financing, and customer service. We believe that we have improved, and we continually seek to improve, in each of these areas. Our primary focus is increasing farmers’ loyalty to our dealers and overall dealer organizational quality in order to distinguish us in the marketplace. See “Marketing and Distribution” for additional information.

 

Engineering and Research

 

We make significant expenditures for engineering and applied research to improve the quality and performance of our products, to develop new products and to comply with government safety and engine emissions regulations. Our expenditures on engineering and research were approximately $154.9 million, or 2.3% of net sales, in 2007, $127.9 million, or 2.4% of net sales, in 2006 and $121.7 million, or 2.2% of net sales, in 2005.

 

Intellectual Property

 

We own and have licenses to the rights under a number of domestic and foreign patents, trademarks, trade names and brand names relating to our products and businesses. We defend our patent, trademark and trade and brand name rights primarily by monitoring competitors’ machines and industry publications and conducting other investigative work. We consider our intellectual property rights, including our rights to use our trade and brand names, important in the operation of our businesses. However, we do not believe we are dependent on any single patent, trademark or trade name or group of patents or trademarks, trade names or brand names. Our products are distributed under our brand names AGCO^®, Challenger^®, Fendt^®, Gleaner^®, Hesston^®, Massey Ferguson^®, RoGator^®, Spra-Coupe^®, Sunflower^®, Terra-Gator^®, Valtra^® and White^tm Planters.

 

Environmental Matters and Regulation

 

We are subject to environmental laws and regulations concerning emissions to the air, discharges of processed or other types of wastewater, and the generation, handling, storage, transportation, treatment and disposal of waste materials. These laws and regulations are constantly changing, and the effects that they may have on us in the future are impossible to predict with accuracy. It is our policy to comply with all applicable environmental, health and safety laws and regulations, and we believe that any expense or liability we may incur in connection with any noncompliance with any law or regulation or the cleanup of any of our properties will not have a materially adverse effect on us. We believe that we are in compliance in all material respects with all applicable laws and regulations.

 

The United States Environmental Protection Agency has issued regulations concerning permissible emissions from off-road engines. We do not anticipate that the cost of compliance with the regulations will have a material impact on us. Our SisuDiesel engine division, which specializes in the manufacturing of off-road engines in the 40 to 450 horsepower range, currently complies with Com II, Tier II and Tier III emissions requirements set by European and United States regulatory authorities. We expect to meet future emissions

requirements, such as Tier 4a or Com IIIb requirements effective starting in 2011, through the introduction of new technology to the engines, as necessary.

 

Our international operations also are subject to environmental laws, as well as various other national and local laws, in the countries in which we manufacture and sell our products. We believe that we are in compliance with these laws in all material respects and that the cost of compliance with these laws in the future will not have a materially adverse effect on us.

 

Regulation and Government Policy

 

Domestic and foreign political developments and government regulations and policies directly affect the agricultural industry in the United States and abroad and indirectly affect the agricultural equipment business. The application, modification or adoption of laws, regulations or policies could have an adverse effect on our business.

 

We are subject to various federal, state and local laws affecting our business, as well as a variety of regulations relating to such matters as working conditions and product safety. A variety of laws regulate our contractual relationships with our dealers. These laws impose substantive standards on the relationships between us and our dealers, including events of default, grounds for termination, non-renewal of dealer contracts and equipment repurchase requirements. Such laws could adversely affect our ability to terminate our dealers.

 

Employees

 

As of December 31, 2007, we employed approximately 13,700 employees, including approximately 3,400 employees in the United States and Canada. A majority of our employees at our manufacturing facilities, both domestic and international, are represented by collective bargaining agreements and union contracts with terms that expire on varying dates. We currently do not expect any significant difficulties in renewing these agreements.

 

Available Information

 

Our Internet address is www.agcocorp.com. We make the following reports filed by us available, free of charge, on our website under the heading “SEC Filings” in the “Annual Reports/10Ks” section of our website’s “Investors & Media” section:

 

 

The foregoing reports are made available on our website as soon as practicable after they are filed with the Securities and Exchange Commission (“SEC”).

 

We also provide corporate governance and other information on our website. This information includes:

 

 

In addition, in the event of any waivers of our Code of Ethics, those waivers will be available in the “Office of Ethics and Compliance” section of our website.

Executive Officers of the Registrant

 

The following table sets forth information as of January 31, 2008 with respect to each person who is an executive officer of the Company.

 

 

Martin Richenhagen has been President and Chief Executive Officer since July 2004. From January 2003 to February 2004, Mr. Richenhagen was Executive Vice President of Forbo International SA, a flooring material business based in Switzerland. From 1998 to December 2002, Mr. Richenhagen was Group President of Claas KgaA mbH, a global farm equipment manufacturer and distributor. From 1995 to 1998, Mr. Richenhagen was Senior Executive Vice President for Schindler Deutschland Holdings GmbH, a worldwide manufacturer and distributor of elevators and escalators.

 

Garry L. Ball has been Senior Vice President — Engineering since June 2002. Mr. Ball was Senior Vice President — Engineering and Product Development from June 2001 to June 2002. From 2000 to 2001, Mr. Ball was Vice President of Engineering at CapacityWeb.com. From 1999 to 2000, Mr. Ball was Vice President of Construction Equipment New Product Development at Case New Holland (CNH) Global N.V. Prior to that, he held several key positions including Vice President of Engineering Agricultural Tractor for New Holland N.V., Europe, and Chief Engineer for Tractors at Ford New Holland.

 

Andrew H. Beck has been Senior Vice President — Chief Financial Officer since June 2002. Mr. Beck was Vice President, Chief Accounting Officer from January 2002 to June 2002, Vice President and Controller from April 2000 to January 2002, Corporate Controller from January 1996 to April 2000, Assistant Treasurer from March 1995 to January 1996 and Controller, International Operations from June 1994 to March 1995.

 

Norman L. Boyd has been Senior Vice President — Human Resources since June 2002. Mr. Boyd was Senior Vice President — Corporate Development for the Company from October 1998 to June 2002, Vice President of Europe/Africa/Middle East Distribution from February 1997 to September 1998, Vice President of Marketing, Americas from February 1995 to February 1997 and Manager of Dealer Operations from January 1993 to February 1995.

 

David L. Caplan has been Senior Vice President — Materials Management, Worldwide since October 2003. Mr. Caplan was Senior Director of Purchasing of PACCAR Inc. from January 2002 to October 2003 and was Director of Operation Support with Kenworth Truck Company from November 1997 to January 2002.

 

André M. Carioba has been Senior Vice President and General Manager, South America since July 2006. Mr. Carioba held several positions with BMW Group and its subsidiaries worldwide, including President and Chief Executive Officer of BMW Brazil Ltda., from August 2000 to December 2005, Director of Purchasing and Logistics of BMW Brazil Ltda., from September 1998 to July 2000 and Senior Manager for International Purchasing Projects of BMW AG in Germany from January 1995 to August 1998.

 

Gary L. Collar has been Senior Vice President and General Manager, EAME and EAPAC since January 2004. Mr. Collar was Vice President, Worldwide Market Development for the Challenger Division from May 2002 until January 2004. Between 1994 and 2002, Mr. Collar held various senior executive positions with ZF

Friedrichshaven A.G., including Vice President Business Development, North America, from 2001 until 2002, and President and Chief Executive Officer of ZF-Unisia Autoparts, Inc., from 1994 until 2001.

 

Robert B. Crain has been Senior Vice President and General Manager, North America since January 2006. Mr. Crain held several positions with CNH Global N.V. and its predecessors, including Vice President of New Holland’s North America Agricultural Business from February 2004 to December 2005, Vice President of CNH Marketing North America Agricultural business from January 2003 to January 2004 and Vice President and General Manager of Worldwide Operations for the Crop Harvesting Division of CNH Global N.V., from January 1999 to December 2002.

 

Randall G. Hoffman has been Senior Vice President — Global Sales and Marketing since November 2005. Mr. Hoffman was the Senior Vice President and General Manager, Challenger Division Worldwide from January 2004 to November 2005, Vice President and General Manager, Worldwide Challenger Division, from June 2002 to January 2004, Vice President of Sales and Marketing, North America, from December 2001 to June 2002, Vice President, Marketing North America, from April 2001 to November 2001, Vice President of Dealer Operations, from June 2000 to April 2001, Director, Distribution Development, North America, from April 2000 to June 2000, Manager, Distribution Development, North America, from May 1998 to April 2000, and General Marketing Manager, from January 1995 to May 1998.

 

Stephen D. Lupton has been Senior Vice President — Corporate Development and General Counsel since June 2002. Mr. Lupton was Senior Vice President, General Counsel for the Company from June 1999 to June 2002, Vice President of Legal Services, International from October 1995 to May 1999, and Director of Legal Services, International from June 1994 to October 1995. Mr. Lupton was Director of Legal Services of Massey Ferguson from February 1990 to June 1994.

 

Hubertus M. Muehlhaeuser has been Senior Vice President — Strategy & Integration and Information Technology since September 2005 (Information Technology responsibility was assumed in September 2006). Effective February 1, 2007, he also was named General Manager, Engines. Previously, he spent over ten years with Arthur D. Little, Ltd., an international management-consulting firm, where he was made a partner in 1999. From October 2000 to May 2005, he led that firm’s Global Strategy and Organization Practice as a member of the firm’s global management team, and was the firm’s managing director of Switzerland from April 2001 to May 2005.

 

Financial Information on Geographical Areas

 

For financial information on geographic areas, see pages 108 through 110 of this Form 10-K under the caption “Segment Reporting,” which information is incorporated herein by reference.

 

 

We make forward-looking statements in this report, in other materials we file with the SEC or otherwise release to the public, and on our website. In addition, our senior management might make forward-looking statements orally to analysts, investors, the media and others. Statements concerning our future operations, prospects, strategies, financial condition, future economic performance (including growth and earnings) and demand for our products and services, and other statements of our plans, beliefs, or expectations, including the statements contained in Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” regarding industry conditions, market demand, strategic investments, payment of current accrued taxes, net sales and income, restructuring and other infrequent expenses, impacts of unrecognized actuarial losses related to our pension and postretirement benefit plans, pension investments and funding, conversion features of our notes, realization of net deferred tax assets and the adoption of certain accounting changes or the fulfillment of working capital needs, are forward-looking statements. In some cases these statements are identifiable through the use of words such as “anticipate,” “believe,” “estimate,” “expect,” “intend,” “plan,” “project,” “target,” “can,” “could,” “may,” “should,” “will,” “would” and similar expressions. You are cautioned not to place undue reliance on these forward-looking statements. The forward-looking statements we make are not guarantees of future performance and are subject to various assumptions, risks, and other factors that could cause actual results to differ materially from those suggested by these forward-looking statements. These

factors include, among others, those set forth below and in the other documents that we file with the SEC. There also are other factors that we may not describe, generally because we currently do not perceive them to be material that could cause actual results to differ materially from our expectations.

 

We expressly disclaim any obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

 

Our financial results depend entirely upon the agricultural industry, and factors that adversely affect the agricultural industry generally will adversely affect us.

 

Our success depends heavily on the vitality of the agricultural industry. Historically, the agricultural industry, including the agricultural equipment business, has been cyclical and subject to a variety of economic factors, governmental regulations and legislation, and weather conditions. Sales of agricultural equipment generally are related to the health of the agricultural industry, which is affected by farm income, debt levels and land values, all of which reflect levels of commodity prices, acreage planted, crop yields, agricultural product demand including crops used for renewable energies, government policies and government subsidies. Sales also are influenced by economic conditions, interest rate and exchange rate levels, and the availability of retail financing. Trends in the industry, such as farm consolidations, may affect the agricultural equipment market. In addition, weather conditions, such as heat waves or droughts, and pervasive livestock diseases can affect farmers’ buying decisions. Downturns in the agricultural industry due to these or other factors are likely to result in decreases in demand for agricultural equipment, which would adversely affect our sales, growth, results of operations and financial condition. During previous downturns in the farm sector, we experienced significant and prolonged declines in sales and profitability, and we expect our business to remain subject to similar market fluctuations in the future.

 

The agricultural equipment industry is highly seasonal, and seasonal fluctuations significantly impact results of operations and cash flows.

 

The agricultural equipment business is highly seasonal, which causes our quarterly results and our available cash flow to fluctuate during the year. The fourth quarter is also typically a large period for retail sales because of our customers’ year end tax planning considerations, the increase in availability of funds from completed harvests and the timing of dealer incentives. In addition, farmers purchase agricultural equipment in the Spring and Fall in conjunction with the major planting and harvesting seasons. Our net sales and income from operations have historically been the lowest in the first quarter and have increased in subsequent quarters as dealers increase inventory in anticipation of increased retail sales in the third and fourth quarters.

 

Our success depends on the introduction of new products, which requires substantial expenditures.

 

Our long-term results depend upon our ability to introduce and market new products successfully. The success of our new products will depend on a number of factors, including:

 

 

As both we and our competitors continuously introduce new products or refine versions of existing products, we cannot predict the level of market acceptance or the amount of market share our new products will achieve. Any manufacturing delays or problems with our new product launches could adversely affect our operating results. We have experienced delays in the introduction of new products in the past, and we cannot assure you that we will not experience delays in the future. In addition, introducing new products could result in a decrease in revenues from our existing products. Consistent with our strategy of offering new products and product refinements, we expect to continue to use a substantial amount of capital for further product

development and refinement. We may need more capital for product development and refinement than is available to us, which could adversely affect our business, financial condition or results of operations.

 

We face significant competition and, if we are unable to compete successfully against other agricultural equipment manufacturers, we would lose customers and our net sales and profitability would decline.

 

The agricultural equipment business is highly competitive, particularly in North America, Europe and Latin America. We compete with several large national and international companies that, like us, offer a full line of agricultural equipment. We also compete with numerous short-line and specialty manufacturers and suppliers of farm equipment products. Our two key competitors, Deere & Company and CNH Global N.V., are substantially larger than we are and may have greater financial and other resources. In addition, in some markets, we compete with smaller regional competitors with significant market share in a single country or group of countries. Our competitors may substantially increase the resources devoted to the development and marketing, including discounting, of products that compete with our products. If we are unable to compete successfully against other agricultural equipment manufacturers, we could lose customers and our net sales and profitability may decline. There also can be no assurances that consumers will continue to regard our agricultural equipment favorably, due to the features and quality of our products, and we may be unable to develop new products that appeal to consumers or unable to continue to compete successfully in the agricultural equipment business. In addition, competitive pressures in the agricultural equipment business may affect the market prices of new and used equipment, which, in turn, may adversely affect our sales margins and results of operations.

 

Rationalization or restructuring of manufacturing facilities may cause production capacity constraints and inventory fluctuations.

 

The rationalization of our manufacturing facilities has at times resulted in, and similar rationalizations or restructurings in the future may result in, temporary constraints upon our ability to produce the quantity of products necessary to fill orders and thereby complete sales in a timely manner. A prolonged delay in our ability to fill orders on a timely basis could affect customer demand for our products and increase the size of our product inventories, causing future reductions in our manufacturing schedules and adversely affecting our results of operations. Moreover, our continuous development and production of new products will often involve the retooling of existing manufacturing facilities. This retooling may limit our production capacity at certain times in the future, which could adversely affect our results of operations and financial condition.

 

We depend on suppliers for raw materials, components and parts for our products, and any failure by our suppliers to provide products as needed, or by us to promptly address supplier issues, will adversely impact our ability to timely and efficiently manufacture and sell products. We also are subject to raw material price fluctuations, which can adversely affect our manufacturing costs.

 

Our products include components and parts manufactured by others. As a result, our ability to timely and efficiently manufacture existing products, to introduce new products and to shift manufacturing of products from one facility to another depends on the quality of these components and parts and the timeliness of their delivery to our facilities. At any particular time, we depend on many different suppliers, and the failure by one or more of our suppliers to perform as needed will result in fewer products being manufactured, shipped and sold. If the quality of the components or parts provided by our suppliers is less than required and we do not recognize that failure prior to the shipment of our products, we will incur higher warranty costs. The timely supply of component parts for our products also depends on our ability to manage our relationships with suppliers, to identify and replace suppliers that fail to meet our schedules or quality standards, and to monitor the flow of components and accurately project our needs. A significant increase in the price of any component or raw material could adversely affect our profitability. We cannot avoid exposure to global price fluctuations, such as occurred in the past with the costs of steel and related products, and our profitability depends on, among other things, our ability to raise equipment and parts prices sufficiently enough to recover any such material or component cost increases.

Our business routinely is subject to claims and legal actions, some of which could be material.

 

We routinely are a party to claims and legal actions incidental to our business. These include claims for personal injuries by users of farm equipment, disputes with distributors, vendors and others with respect to commercial matters, and disputes with taxing and other governmental authorities regarding the conduct of our business. In February 2006, we received a subpoena from the SEC in connection with a non-public, fact-finding inquiry entitled “In the Matter of Certain Participants in the Oil for Food Program.” This subpoena requested documents concerning transactions in Iraq under the United Nations Oil for Food Program by AGCO and certain of our subsidiaries. Subsequently we were contacted by the Department of Justice (the “DOJ”) regarding the same transactions, although no subpoena or other formal process has been initiated by the DOJ. Similar inquiries have been initiated by the Danish and French governments regarding two of our subsidiaries. The inquiries arose from sales of approximately $58.0 million in farm equipment to the Iraq ministry of agriculture between 2000 and 2002. The SEC’s staff has asserted that certain aspects of those transactions were not properly recorded in our books and records. We are cooperating fully in these inquiries. It is not possible to predict the outcome of these inquiries or their impact, if any, on us; although if the outcomes were adverse we could be required to pay fines and make other payments as well as take appropriate remedial actions.

 

A majority of our sales and manufacturing take place outside the United States, and, as a result, we are exposed to risks related to foreign laws, taxes, economic conditions, labor supply and relations, political conditions and governmental policies. These risks may delay or reduce our realization of value from our international operations.

 

For the year ended December 31, 2007, we derived approximately $5.7 billion or 83% of our net sales from sales outside the United States. The primary foreign countries in which we do business are Germany, France, Brazil, the United Kingdom, Finland and Canada. In addition, we have significant manufacturing operations in France, Germany, Brazil and Finland. Our results of operations and financial condition may be adversely affected by the laws, taxes, economic conditions, labor supply and relations, political conditions and governmental policies of the foreign countries in which we conduct business. Some of our international operations also are subject to various risks that are not present in domestic operations, including restrictions on dividends and the repatriation of funds. Foreign developing markets may present special risks, such as unavailability of financing, inflation, slow economic growth and price controls.

 

Domestic and foreign political developments and government regulations and policies directly affect the international agricultural industry, which affects the demand for agricultural equipment. If demand for agricultural equipment declines, our sales, growth, results of operations and financial condition may be adversely affected. The application, modification or adoption of laws, regulations, trade agreements or policies adversely affecting the agricultural industry, including the imposition of import and export duties and quotas, expropriation and potentially burdensome taxation, could have an adverse effect on our business. The ability of our international customers to operate their businesses and the health of the agricultural industry, in general, are affected by domestic and foreign government programs that provide economic support to farmers. As a result, farm income levels and the ability of farmers to obtain advantageous financing and other protections would be reduced to the extent that any such programs are curtailed or eliminated. Any such reductions would likely result in a decrease in demand for agricultural equipment. For example, a decrease or elimination of current price protections for commodities or of subsidy payments for farmers in the European Union, the United States, Brazil or elsewhere in South America could negatively impact the operations of farmers in those regions, and, as a result, our sales may decline if these farmers delay, reduce or cancel purchases of our products.

 

Currency exchange rate and interest rate changes can adversely affect the pricing and profitability of our products.

 

We conduct operations in many areas of the world involving transactions denominated in a variety of currencies. Our production costs, profit margins and competitive position are affected by the strength of the currencies in countries where we manufacture or purchase goods relative to the strength of the currencies in countries where our products are sold. In addition, we are subject to currency exchange rate risk to the extent that our costs are denominated in currencies other than those in which we earn revenues and to risks associated with translating the financial statements of our foreign subsidiaries from local currencies into United States

dollars. Similarly, changes in interest rates affect our results of operations by increasing or decreasing borrowing costs and finance income. Our most significant transactional foreign currency exposures are the Euro, Brazilian real and the Canadian dollar in relation to the United States dollar. Where naturally offsetting currency positions do not occur, we attempt to manage these risks by economically hedging some, but not all, of our exposures through the use of foreign currency forward exchange or option contracts. As with all hedging instruments, there are risks associated with the use of foreign currency forward exchange contracts, interest rate swap agreements and other risk management contracts. While the use of such hedging instruments provides us with protection from certain fluctuations in currency exchange and interest rates, we potentially forego the benefits that might result from favorable fluctuations in currency exchange and interest rates. In addition, any default by the counterparties to these transactions could adversely affect us. Despite our use of economic hedging transactions, currency exchange rate or interest rate fluctuations may adversely affect our results of operations, cash flow or financial condition.

 

We are subject to extensive environmental laws and regulations, and our compliance with, or our failure to comply with, existing or future laws and regulations could delay production of our products or otherwise adversely affect our business.

 

We are subject to increasingly stringent environmental laws and regulations in the countries in which we operate. These regulations govern, among other things, emissions into the air, discharges into water, the use, handling and disposal of hazardous substances, waste disposal and the remediation of soil and groundwater contamination. Our costs of complying with these or any other current or future environmental regulations may be significant. For example, the European Union and the United States have adopted more stringent environmental regulations regarding emissions into the air. As a result, we will likely incur increased capital expenses to modify our products to comply with these regulations. Further, we may experience production delays if we or our suppliers are unable to design and manufacture components for our products that comply with environmental standards established by regulators. For example, our SisuDiesel engine division and our engine suppliers are subject to air quality standards, and production at our facilities could be impaired if SisuDiesel and these suppliers are unable to timely respond to any changes in environmental laws and regulations affecting engine emissions. Compliance with environmental and safety regulations has added, and will continue to add, to the cost of our products and increase the capital-intensive nature of our business. We may be adversely impacted by costs, liabilities or claims with respect to our operations under existing laws or those that may be adopted in the future. If we fail to comply with existing or future laws and regulations, we may be subject to governmental or judicial fines or sanctions and our business and results of operations could be adversely affected.

 

Our labor force is heavily unionized, and our contractual and legal obligations under collective bargaining agreements and labor laws subject us to the risks of work interruption or stoppage and could cause our costs to be higher.

 

Most of our employees, most notably at our manufacturing facilities, are represented by collective bargaining agreements and union contracts with terms that expire on varying dates. Several of our collective bargaining agreements and union contracts are of limited duration and, therefore, must be re-negotiated frequently. As a result, we could incur significant administrative expenses associated with union representation of our employees. Furthermore, we are at greater risk of work interruptions or stoppages than non-unionized companies, and any work interruption or stoppage could significantly impact the volume of goods we have available for sale. In addition, collective bargaining agreements, union contracts and labor laws may impair our ability to reduce our labor costs by streamlining existing manufacturing facilities and in restructuring our business because of limitations on personnel and salary changes and similar restrictions.

 

We have significant pension obligations with respect to our employees and our available cash flow may be adversely affected in the event that payments became due under any pension plans that are unfunded or underfunded.

 

A portion of our active and retired employees participate in defined benefit pension plans under which we are obligated to provide prescribed levels of benefits regardless of the value of the underlying assets, if any, of

the applicable pension plan. If our obligations under a plan are unfunded or underfunded, we will have to use cash flow from operations and other sources to pay our obligations either as they become due or over some shorter funding period. As of December 31, 2007, we had approximately $155.0 million in unfunded or underfunded obligations related to our pension and other postretirement health care benefits.

 

We have a substantial amount of indebtedness, and, as a result, we are subject to certain restrictive covenants and payment obligations that may adversely affect our ability to operate and expand our business.

 

We have a significant amount of indebtedness. As of December 31, 2007, we had total long-term indebtedness, including current portions of long-term indebtedness, of approximately $696.9 million, stockholders’ equity of approximately $2,043.0 million and a ratio of total indebtedness to equity of approximately 0.3 to 1.0. We also had short-term obligations of $180.2 million, capital lease obligations of $9.0 million, unconditional purchase or other long-term obligations of $528.9 million, and amounts funded under an accounts receivable securitization facility of $446.3 million. In addition, we had guaranteed indebtedness owed to third parties of approximately $168.4 million, primarily related to dealer and end-user financing of equipment.

 

Holders of our 13/4% convertible senior subordinated notes due 2033 and our 11/4% convertible senior subordinated notes due 2036 may convert the notes if, during any fiscal quarter, the closing sales price of our common stock exceeds 120% of the conversion price of $22.36 per share for our 13/4% convertible senior subordinated notes and $40.73 per share for our 11/4% convertible senior subordinated notes for at least 20 trading days in the 30 consecutive trading days ending on the last trading day of the preceding fiscal quarter. As of December 31, 2007, the closing sales price of our common stock had exceeded 120% of the conversion price for both notes for at least 20 trading days in the 30 consecutive trading days ending December 31, 2007, and, therefore, we classified the notes as current liabilities. Future classification of the notes between current and long-term debt is dependent on the closing sales price of our common stock during future quarters. We believe it is unlikely the holders of the notes would convert the notes under the provisions of the indenture agreement, thereby requiring us to repay the principal portion in cash. In the event the notes were converted, we believe we could repay the notes with available cash on hand, funds from our existing $300.0 million multi-currency revolving credit facility, or a combination of these sources.

 

Our substantial indebtedness could have important adverse consequences. For example, it could:

 

 

 

Not applicable.

 

 

Our principal properties as of January 31, 2008, were as follows:

 

 

 

 

We consider each of our facilities to be in good condition and adequate for its present use. We believe that we have sufficient capacity to meet our current and anticipated manufacturing requirements.

 

 

In February 2006, we received a subpoena from the SEC in connection with a non-public, fact-finding inquiry entitled “In the Matter of Certain Participants in the Oil for Food Program.” This subpoena requested documents concerning transactions in Iraq under the United Nations Oil for Food Program by AGCO and certain of our subsidiaries. Subsequently we were contacted by the DOJ regarding the same transactions, although no subpoena or other formal process has been initiated by the DOJ. Similar inquiries have been initiated by the Danish and French governments regarding two of our subsidiaries. The inquiries arose from sales of approximately $58.0 million in farm equipment to the Iraq ministry of agriculture between 2000 and 2002. The SEC’s staff has asserted that certain aspects of those transactions were not properly recorded in our books and records. We are cooperating fully in these inquiries. It is not possible to predict the outcome of these inquiries or their impact, if any, on us; although if the outcomes were adverse we could be required to pay fines and make other payments as well as take appropriate remedial actions.

 

We are a party to various legal claims and actions incidental to our business. We believe that none of these claims or actions, either individually or in the aggregate, is material to our business or financial condition.

 

 

Not Applicable.

 

PART II

 

 

Our common stock is listed on the New York Stock Exchange (“NYSE”) and trades under the symbol AG. As of the close of business on February 15, 2008, the closing stock price was $64.49, and there were 491 stockholders of record. (This number does not include stockholders who hold their stock through brokers, banks and other nominees.) The following table sets forth, for the periods indicated, the high and low sales prices for our common stock for each quarter within the last two years, as reported on the NYSE.

 

 

 

DIVIDEND POLICY

 

We currently do not pay dividends. We cannot provide any assurance that we will pay dividends in the foreseeable future. Although we are in compliance with all provisions of our debt agreements, our credit facility and the indenture governing our senior subordinated notes contain restrictions on our ability to pay dividends in certain circumstances.

 

 

The following tables present our selected consolidated financial data. The data set forth below should be read together with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our historical Consolidated Financial Statements and the related notes. Our operating data and selected balance sheet data as of and for the years ended December 31, 2007, 2006, 2005, 2004 and 2003 were derived from the 2007, 2006, 2005, 2004 and 2003 Consolidated Financial Statements, which have been audited by KPMG LLP, independent registered public accounting firm. The Consolidated Financial Statements as of December 31, 2007 and 2006 and for the years ended December 31, 2007, 2006 and 2005 and the reports thereon, which refer to changes in the methods of accounting for share-based payment and defined benefit pension and other postretirement plans and the method of quantifying errors in 2006, are included in Item 8 in this Form 10-K. The historical financial data may not be indicative of our future performance.

 

 

 

 

 

 

We are a leading manufacturer and distributor of agricultural equipment and related replacement parts throughout the world. We sell a full range of agricultural equipment, including tractors, combines, hay tools, sprayers, forage equipment and implements and a line of diesel engines. Our products are widely recognized in the agricultural equipment industry and are marketed under a number of well-known brand names, including AGCO^®, Challenger^®, Fendt^®, Gleaner^®, Hesston^®, Massey Ferguson^®, RoGator^®, Spra-Coupe^®, Sunflower^®, Terra-Gator^®, Valtra^®, and White^tm Planters. We distribute most of our products through a combination of approximately 3,000 independent dealers, distributors, associates and licensees. In addition, we provide retail financing in the United States, Canada, Brazil, Germany, France, the United Kingdom, Australia, Ireland and Austria through our finance joint ventures with Rabobank.

 

Results of Operations

 

We sell our equipment and replacement parts to our independent dealers, distributors and other customers. A large majority of our sales are to independent dealers and distributors that sell our products to the end user. To the extent practicable, we attempt to sell products to our dealers and distributors on a level basis throughout the year to reduce the effect of seasonal demands on our manufacturing operations and to minimize our investment in inventory. However, retail sales by dealers to farmers are highly seasonal and are linked to the planting and harvesting seasons. In certain markets, particularly in North America, there is often a time lag, which varies based on the timing and level of retail demand, between our sale of the equipment to the dealer and the dealer’s sale to a retail customer.

 

The following table sets forth, for the periods indicated, the percentage relationship to net sales of certain items included in our Consolidated Statements of Operations:

 

 

2007 Compared to 2006

 

Net income for 2007 was $246.3 million, or $2.55 per diluted share, compared to a net loss for 2006 of $64.9 million, or $0.71 per diluted share.

Our results for 2007 included the following items:

 

 

Our results for 2006 included the following items:

 

 

Net sales for 2007 were approximately $1.4 billion, or 25.6%, higher than 2006 primarily due to improved industry conditions in most major global agricultural equipment markets and the positive impact of foreign currency translation. Sales growth was achieved in all of our geographic operating segments. Income from operations was $394.8 million in 2007 compared to $68.9 million in 2006. Income from operations during 2006 was negatively impacted by a $171.4 million goodwill impairment charge. The increase in income from operations and operating margins during 2007 was due primarily to sales volume growth, improved product mix and cost control initiatives.

 

In our Europe/Africa/Middle East operations, income from operations improved approximately $118.6 million in 2007 compared to 2006, primarily due to increased sales volumes, currency translation, a better mix of high horsepower tractors, and margin improvements achieved through higher production volumes and cost reduction initiatives. Income from operations in our South American operations increased approximately $56.1 million in 2007 compared to 2006, primarily due to sales growth resulting from stronger market conditions, primarily in the major market of Brazil, as well as margin improvement related to higher sales and production as well as cost management. In North America, income from operations increased approximately $2.1 million in 2007 compared to 2006, primarily due to higher sales as a result of improved market conditions. Our results in North America continue to be affected by the negative impacts of currency movements on products sourced from Brazil and Europe. Income from operations in our Asia/Pacific region decreased approximately $0.4 million in 2007 compared to 2006 primarily due to lower operating margins resulting from foreign currency impacts and sales mix.

 

Retail Sales

 

Worldwide industry equipment demand for farm equipment increased in 2007 in most major markets. Improved farm income driven by higher farm commodity prices have contributed to the improved demand for equipment. Farm commodity prices have been supported as a result of strong global demand and historically low inventories of commodities. Population growth, increased protein consumption in Asia, and an accelerating trend towards renewable energies have contributed to solid demand for farm commodities. In North America, industry demand increased particularly in the higher horsepower equipment segments due to higher farm income. In Europe, industry demand increased compared to the prior year due to growth in the French, U.K., Scandinavian and Central and Eastern European markets. In South America, industry demand improved due to a recovery in the Brazil and Argentina markets resulting from improved farm income in the region.

 

In the United States and Canada, industry unit retail sales of tractors increased approximately 1% in 2007 compared to 2006, due to increases in the high horsepower and utility tractor segments, offset by a decrease in the compact tractor segment. Industry unit retail sales of combines increased approximately 13% when compared to the prior year. Our unit retail sales of high horsepower tractors and combines in North America increased while our unit retail sales of utility and compact tractors decreased in 2007 compared to 2006 levels.

In Europe, industry unit retail sales of tractors increased approximately 4% in 2007 compared to 2006. Demand was strongest in the high horsepower segment and in the markets of Central and Eastern Europe, the United Kingdom, Scandinavia and France, which offset weaker markets in Spain, Italy and Germany. Our unit retail sales of tractors for 2007 in Europe were also higher when compared to 2006. In South America, industry unit retail sales of tractors in 2007 increased approximately 50% compared to 2006. Retail sales of tractors in the major market of Brazil increased approximately 53% during 2007. Industry unit retail sales of combines during 2007 were approximately 79% higher than the prior year, with an increase in Brazil of approximately 131% compared to the prior year. Our unit retail sales of tractors and combines in South America were also higher in 2007 compared to 2006. In other international markets, our net sales for 2007 were approximately 9.6% lower than the prior year, due to lower sales in the Middle East.

 

Results of Operations

 

Net sales for 2007 were $6,828.1 million compared to $5,435.0 million for 2006. The increase was primarily attributable to significant net sales increases in the South America and Europe/Africa/Middle East regions as well as positive currency translation impacts. Currency translation positively impacted net sales by approximately $473.3 million, primarily due to the continued strengthening of the Brazilian Real and the Euro. The following table sets forth, for the periods indicated, the impact to net sales of currency translation by geographical segment (in millions, except percentages):

 

 

Regionally, net sales in North America increased during 2007 primarily due to higher sales of higher horsepower tractors, combines and hay equipment due to market growth in those segments. In the Europe/Africa/Middle East region, net sales increased in 2007 primarily due to sales growth in tractors and parts particularly in the markets of France, Germany, the United Kingdom, Scandinavia and Eastern and Central Europe. In South America, net sales increased during 2007 compared to 2006 primarily as a result of a recovery in the major market of Brazil, and sales growth in Argentina. In the Asia/Pacific region, net sales increased in 2007 compared to 2006 due to improved industry demand in the region. We estimate that worldwide average price increases during 2007 contributed approximately 1.5% to the increase in net sales. Consolidated net sales of tractors and combines, which consisted of approximately 73% of our net sales in 2007, increased approximately 29% in 2007 compared to 2006. Unit sales of tractors and combines increased approximately 13% during 2007 compared to 2006. The difference between the unit sales increase and the increase in net sales was the result of foreign currency translation, pricing and sales mix changes.

The following table sets forth, for the periods indicated, the percentage relationship to net sales of certain items included in our Consolidated Statements of Operations (in millions, except percentages):

 

 

Gross profit as a percentage of net sales increased during 2007 as compared to 2006 primarily due to increased net sales, higher production and an improved sales mix, partially offset by negative currency impacts. Margins in North America were affected by the weak United States dollar on products imported from our European and Brazilian manufacturing facilities. Unit production of tractors and combines during 2007 was approximately 20% higher than 2006. Gross margins also benefited from productivity improvements that were achieved through purchasing initiatives, resourcing of components and labor efficiencies. We recorded approximately $1.0 million of stock compensation expense, within cost of goods sold, during 2007 in accordance with SFAS No. 123R (Revised 2004), “Share-Based Payment” (“SFAS No. 123R”), as is more fully explained in Note 1 to our Consolidated Financial Statements.

 

Selling, general and administrative (“SG&A”) expenses as a percentage of net sales decreased during 2007 compared to 2006 primarily as a result of higher sales volumes in 2007 and cost control initiatives. We recorded approximately $25.0 million and $3.5 million of stock compensation expense, within SG&A, during 2007 and 2006, respectively, in accordance with SFAS No. 123R, as is more fully explained in Note 1 to our Consolidated Financial Statements. Engineering expenses increased during 2007 as a result of continued spending to fund product improvements and cost reduction projects.

 

The restructuring and other infrequent income recorded in 2007 primarily related to a $3.2 million gain on the sale of a portion of the buildings, land and improvements associated with our Randers, Denmark facility. This gain was partially offset by $0.9 million of charges primarily related to severance and employee relocation costs associated with the rationalization of our Valtra sales office located in France as well our rationalization of certain parts, sales and marketing and administrative functions in Germany. The restructuring and other infrequent expenses in 2006 primarily related to severance costs associated with the rationalization of certain parts, sales, marketing and administrative functions in the United Kingdom and Germany, as well as the rationalization of certain Valtra European sales offices located in Denmark, Norway, Germany and the United Kingdom. See “Restructuring and Other Infrequent (Income) Expenses.”

 

In 2006, sales and operating income of our Sprayer business declined significantly as compared to prior years. This was primarily due to increased competition resulting from updated product offerings from our major competitors and a shift in industry demand away from our strength in the commercial application segment to the farmer-owned segment. In addition, our projections for our Sprayer business did not result in a valuation sufficient to support the carrying amount of the goodwill balance on our Consolidated Balance Sheet attributable to the Sprayer business. As a result, during the fourth quarter of 2006, we recorded a non-cash goodwill impairment charge of $171.4 million related to our Sprayer business in accordance with the provisions of SFAS No. 142. The results of our annual impairment analyses conducted as of October 1, 2007 indicated that no reduction in the carrying amount of goodwill for our other reporting units was required in 2007. Refer to “Critical Accounting Estimates” and Note 1 to our Consolidated Financial Statements for further discussion.

 

Interest expense, net was $24.1 million for 2007 compared to $55.2 million for 2006. The decrease was primarily due to debt refinancing as well as a reduction in debt levels from 2006. In December 2006, we issued $201.3 million aggregate principal amount of 11/4% convertible senior subordinated notes. The net

proceeds received from the issuance of the notes, as well as available cash on hand, were used to repay a portion of our outstanding United States dollar and Euro denominated term loans, which carried a higher variable interest rate. In June 2007, we repaid the remaining balances of our outstanding United States dollar and Euro denominated term loans with available cash on hand. See “Liquidity and Capital Resources.”

 

Other expense, net was $43.4 million in 2007 compared to $32.9 million in 2006. Losses on sales of receivables primarily under our securitization facilities were $36.1 million in 2007 compared to $29.9 million in 2006. The increase during 2007 is primarily due to higher interest rates in 2007 compared to 2006.

 

We recorded an income tax provision of $111.4 million in 2007 compared to $73.5 million in 2006. SFAS No. 109, “Accounting for Income Taxes” (“SFAS No. 109”), requires the establishment of a valuation allowance when it is more likely than not that some portion or all of a company’s deferred tax assets will not be realized. In accordance with SFAS No. 109, we assessed the likelihood that our deferred tax assets would be recovered from estimated future taxable income and available income tax planning strategies. In 2007 and 2006, our effective tax rate was negatively impacted by incurring losses in tax jurisdictions where we recorded no tax benefit. The most significant impact related to losses incurred in the United States where losses were primarily due to lower operating margins, as discussed above. At December 31, 2007 and 2006, we had gross deferred tax assets of $479.1 million and $472.5 million, respectively, including $247.8 million and $246.6 million, respectively, related to net operating loss carryforwards. At December 31, 2007 and 2006, we had recorded total valuation allowances as an offset to the gross deferred tax assets of $315.3 million and $291.4 million, respectively, primarily related to net operating loss carryforwards in Brazil, Denmark and the United States. Realization of the remaining deferred tax assets as of December 31, 2007 depends on generating sufficient taxable income in future periods, net of reversing deferred tax liabilities. We believe it is more likely than not that the remaining net deferred tax assets will be realized.

 

In 2006, the Financial Accounting Standards Board (“FASB”) issued FASB Interpretation (“FIN”) No. 48, “Accounting for Uncertainty in Income Taxes — an interpretation of FASB Statement No. 109” (“FIN 48”). FIN 48 clarifies the accounting for uncertainty in income taxes recognized in an enterprise’s financial statements in accordance with SFAS No. 109. FIN 48 also prescribes a recognition threshold and measurement of a tax position taken or expected to be taken in an enterprise’s tax return. FIN 48 is effective for fiscal years beginning after December 15, 2006. Accordingly, we adopted the provisions of FIN 48 on January 1, 2007. As a result of our implementation of FIN 48, we did not recognize a material adjustment with respect to liabilities for unrecognized tax benefits. At December 31, 2007, we had approximately $22.7 million of unrecognized tax benefits, all of which would impact our effective tax rate if recognized. As of December 31, 2007, we had approximately $14.0 million of current accrued taxes related to uncertain income tax positions connected with ongoing tax audits in various jurisdictions that we expect to settle or pay in the next 12 months. We recognize interest and penalties related to uncertain income tax positions in income tax expense. As of December 31, 2007, we had accrued interest and penalties related to unrecognized tax benefits of $1.1 million. See Note 6 to our Consolidated Financial Statements for further discussion of our adoption of FIN 48.

 

Equity in net earnings of affiliates was $30.4 million in 2007 compared to $27.8 million in 2006. The increase in 2007 was related to our 50% interest in the Laverda operating joint venture acquired in September 2007, as well as increased earnings in our retail finance joint ventures. As of December 31, 2007, the retail finance portfolio in our AGCO Finance joint venture in Brazil was approximately $1.1 billion. As a result of weak market conditions in 2005 and 2006, a substantial portion of this portfolio has been included in a payment deferral program directed by the Brazilian government. While the joint venture currently considers its reserves for loan losses adequate, the joint venture will continue to monitor its reserves considering borrower payment history, the value of the underlying equipment financed, and further payment deferral programs implemented by the Brazilian government.

 

2006 Compared to 2005

 

Net loss for 2006 was $64.9 million, or $0.71 per diluted share, compared to net income for 2005 of $31.6 million, or $0.35 per diluted share.

Our results for 2006 included the following items:

 

 

Our results for 2005 included the following items:

 

 

Net sales for 2006 were approximately 0.3% lower than 2005 primarily due to significant sales declines in the North America, South America and Asia/Pacific regions, primarily due to weak market demand. The decline was partially offset by sales growth in the Europe/Africa/Middle East region, particularly in Europe. Income from operations, including restructuring and other infrequent expenses and a $171.4 million goodwill impairment charge, was $68.9 million in 2006 compared to $274.7 million in 2005. In addition to the impairment charge, the decrease in income from operations was due primarily to lower operating income in the North America and Asia/Pacific regions as a result of sales declines, partially offset by improvements in our Europe/Africa/Middle East and South American regions. Operating margins declined in 2006 as a result of reduced production levels, sales declines, higher engineering expenses and negative currency impacts. Productivity improvements and favorable sales mix helped to offset a portion of the decline.

 

In our Europe/Africa/Middle East region, income from operations improved approximately $36.9 million in 2006 compared to 2005. The increase is the result of higher sales levels compared to 2005, particularly in Germany, the United Kingdom, Scandinavia and Central and Eastern Europe, as well as margin improvements achieved through productivity improvements and sales mix. Income from operations in our South American region increased approximately $7.4 million in 2006 compared to 2005. This improvement was the result of higher margins. In North America, income from operations decreased approximately $54.9 million in 2006 compared to 2005 primarily due to a reduction in net sales resulting from lower dealer deliveries that led to a reduction in dealer inventory levels, as well as weaker market conditions. We estimate that dealer inventory levels in North America as of December 31, 2006 declined approximately 14% compared to end of year 2005 levels. Income from operations in our Asia/Pacific region decreased approximately $14.7 million in 2006 compared to 2005 due to lower sales and weaker market conditions in Asia, particularly in Japan, New Zealand and Australia.

 

Retail Sales

 

Worldwide industry equipment demand declined in 2006, with the largest reductions in North America and South America as well as the Asia/Pacific region. In North America, industry demand declined particularly in higher horsepower equipment segments. A reduction in net farm income, caused by an increase in fuel and fertilizer input costs, contributed to the decline in demand. In Europe, industry demand increased slightly compared to the prior year due to growth in the German, U.K., Scandinavian and Eastern and Central European markets. In South America, industry demand continued to decline in 2006 due to reduced farm profits resulting from dry weather conditions, the impact of the strong Brazilian currency on exports of

commodities and high farmer debt levels. Demand stabilized in the latter half of the year in the major market of Brazil, primarily due to solid growth in the citrus and sugar cane sectors.

 

In the United States and Canada, industry unit retail sales of tractors decreased approximately 3% in 2006 compared to 2005, resulting from declines in the compact and high horsepower tractor segments, offset by a slight increase in the utility tractor segment. Industry unit retail sales of combines decreased approximately 6% when compared to the prior year. Our unit retail sales of tractors and combines in North America also decreased compared to 2005 levels. In Europe, industry unit retail sales of tractors increased approximately 3% in 2006 compared to 2005. Retail demand improved in Germany, the United Kingdom, Scandinavia and Central and Eastern Europe but declined in France, Italy and Finland. Our unit retail sales of tractors in Europe were higher during 2006 compared to 2005. In South America, industry unit retail sales of tractors in 2006 decreased approximately 1% compared to 2005. Retail sales of tractors in the major market of Brazil increased approximately 15% during 2006. Industry unit retail sales of combines during 2006 were 37% lower than the prior year, with a decline in Brazil of approximately 33% compared to the prior year. Our unit retail sales of tractors and combines in South America were also lower in 2006 compared to 2005. In other international markets, our net sales for 2006 were approximately 16% lower than the prior year, particularly in Asia, the Middle East, Australia and New Zealand.

 

Results of Operations

 

Net sales for 2006 were $5,435.0 million compared to $5,449.7 million for 2005. The decrease was primarily attributable to significant sales declines in the North America, South America and Asia/Pacific regions, partially offset by sales growth in the Europe/Africa/Middle East region, as well as positive currency translation impacts. Currency translation positively impacted net sales by approximately $114.7 million, primarily due to the continued strengthening of the Brazilian Real and the Euro. The following table sets forth, for the periods indicated, the impact to net sales of currency translation by geographical segment (in millions, except percentages):

 

 

Regionally, net sales in North America decreased during 2006 primarily resulting from weaker market conditions and lower dealer deliveries, which led to a reduction in dealer inventory levels. In the Europe/Africa/Middle East region, net sales increased in 2006 primarily due to sales growth in Germany, the United Kingdom, Scandinavia and Central and Eastern Europe. In South America, net sales, excluding the impact of currency translation, decreased during 2006 compared to 2005 primarily as a result of weak market conditions in the region. In the Asia/Pacific region, net sales decreased in 2006 compared to 2005 due to decreases in industry demand in the region, particularly in Asia, Australia and New Zealand. We estimate that worldwide average price increases during 2006 contributed approximately 2% as an offset to the decrease in net sales. Consolidated net sales of tractors and combines, which consisted of approximately 71% of our net sales in 2006, were relatively flat compared to 2005. Unit sales of tractors and combines decreased approximately 5% during 2006 compared to 2005. The difference between the unit sales decrease and change in net sales was the result of foreign currency translation, pricing and sales mix changes.

The following table sets forth, for the periods indicated, the percentage relationship to net sales of certain items included in our Consolidated Statements of Operations:

 

 

Gross profit as a percentage of net sales was flat during 2006 as compared to 2005. The impact of lower production levels and negative currency impacts were offset by the impact of pricing, improved productivity and new products. Margins in North America were affected by the weak United States dollar on products imported from our European and Brazilian facilities and higher warranty costs. Unit production of tractors and combines during 2006 was approximately 9% lower than 2005. Productivity improvements were achieved through purchasing initiatives, resourcing of components and labor efficiencies. We recorded approximately $0.1 million of stock compensation expense, within cost of goods sold, during 2006 associated with applying the provisions of SFAS No. 123R, as is more fully explained in Note 1 to our Consolidated Financial Statements.

 

SG&A expenses as a percentage of net sales increased during 2006 compared to 2005 primarily as a result of the impact of lower sales volumes in 2006. The increase in SG&A expenses was primarily a result of currency translation impacts. We recorded approximately $3.5 million of stock compensation expense, within SG&A, during 2006 associated with applying the provisions of SFAS No. 123R, as is more fully explained in Note 1 to our Consolidated Financial Statements. Engineering expenses increased during 2006 as a result of our increase in spending to fund product improvements and cost reduction projects.

 

The restructuring and other infrequent expenses in 2006 primarily related to severance costs associated with the rationalization of certain parts, sales, marketing and administrative functions in the United Kingdom and Germany, as well as the rationalization of certain Valtra European sales offices located in Denmark, Norway, Germany and the United Kingdom. The restructuring and other infrequent expenses in 2005 primarily related to the rationalization of our Randers, Denmark combine manufacturing operations. During the second quarter of 2005, we completed auctions of remaining machinery and equipment at the Randers facility and recorded a gain associated with such actions. The gain was offset by restructuring expenses associated with the Randers rationalization, consisting primarily of employee retention payments and other facility closure costs. We also recorded restructuring expenses during 2005 associated with severance costs, retention payments, asset write-downs and contract termination costs related to the rationalization of our Finnish tractor manufacturing, parts distribution and sales operations.

 

In 2006, sales and operating income of our Sprayer operations declined significantly as compared to prior years. This was primarily due to increased competition resulting from updated product offerings from our major competitors and a shift in industry demand away from our strength in the commercial application segment to the farmer-owned segment. In addition, our projections for our Sprayer business did not result in a valuation sufficient to support the carrying amount of the goodwill balance on our Consolidated Balance Sheet attributable to the Sprayer business. As a result, during the fourth quarter of 2006, we recorded a non-cash goodwill impairment charge of $171.4 million related to our Sprayer operations in accordance with the provisions of SFAS No. 142. Refer to “Critical Accounting Estimates” and Note 1 to our Consolidated Financial Statements for further discussion.

 

Interest expense, net was $55.2 million for 2006 compared to $80.0 million for 2005. The decrease in interest expense, net during 2006 was primarily due to the redemption of our $250 million 91/2% senior notes

during the second quarter of 2005. We redeemed the notes at a price of approximately $261.9 million, which included a premium of 4.75% over the face amount of the notes. The premium of approximately $11.9 million and the write-off of the remaining balance of deferred debt issuance costs associated with the senior notes of approximately $2.2 million were recognized in interest expense, net in the second quarter of 2005. In December 2006, we issued $201.3 million of 11/4% convertible senior subordinated notes and received proceeds of approximately $196.4 million, after related fees and expenses. We used the net proceeds received from the issuance of the notes, as well as available cash on hand, to repay a portion of our outstanding United States and Euro denominated term loans. We recorded interest expense of approximately $2.0 million for the proportionate write-off of deferred debt issuance costs associated with the term loan balances that were repaid.

 

Other expense, net was $32.9 million in 2006 compared to $34.6 million in 2005. Losses on sales of receivables primarily under our securitization facilities were $29.9 million in 2006 compared to $22.4 million in 2005. The increase during 2006 is primarily due to higher interest rates in 2006 compared to 2005. This increase in other expense, net was offset by foreign exchange gains during 2006 versus foreign exchange losses during 2005.

 

We recorded an income tax provision of $73.5 million in 2006 compared to $151.1 million in 2005. During the fourth quarter of 2005, we recognized a non-cash deferred income tax charge of $90.8 million related to increasing the valuation allowance against our United States deferred tax assets. SFAS No. 109 requires the establishment of a valuation allowance when it is more likely than not that some portion or all of the deferred tax assets will not be realized. In accordance with SFAS No. 109, we assessed the likelihood that our deferred tax assets would be recovered from estimated future taxable income and available income tax planning strategies. In 2006 and 2005, our effective tax rate was negatively impacted by incurring losses in tax jurisdictions where we recorded no tax benefit. The most significant impact related to losses incurred in the United States. In 2006, we incurred losses in the United States primarily due to lower operating margins. In 2005, we incurred losses in the United States due in part to costs associated with the second quarter redemption of our senior notes, as discussed above, as well as lower operating margins. At December 31, 2006 and 2005, we had gross deferred tax assets of $472.5 million and $429.8 million, respectively, including $246.6 million and $192.9 million, respectively, related to net operating loss carryforwards. At December 31, 2006 and 2005, we had recorded total valuation allowances as an offset to the gross deferred tax assets of $291.4 million and $252.8 million, respectively, primarily related to net operating loss carryforwards in Brazil, Denmark and the United States.

 

Equity in net earnings of affiliates was $27.8 million in 2006 compared to $22.6 million in 2005. The increase in 2006 was related to increased earnings in our retail finance joint ventures. As a result of weak market conditions in 2005 and 2006 in Brazil, a substantial portion of the retail finance portfolio in our AGCO Finance joint venture in Brazil has been included in a payment deferral program directed by the Brazilian government. The joint venture considered its reserves for loan losses adequate as of December 31, 2006.

 

Quarterly Results

 

The following table presents unaudited interim operating results. We believe that the following information includes all adjustments, consisting only of normal recurring adjustments, necessary to present fairly our results of operations for the periods presented. The operating results for any period are not necessarily indicative of results for any future period.

 

 

 

 

Recent Joint Venture and Acquisition

 

On September 28, 2007, we acquired 50% of Laverda for approximately €46.0 million (or approximately $65.6 million), thereby creating an operating joint venture between AGCO and the Italian ARGO group. Laverda is located in Breganze, Italy and manufactures harvesting equipment. In addition to producing Laverda branded combines, the Breganze factory has been manufacturing mid-range combine harvesters for our Massey Ferguson, Fendt and Challenger brands for distribution in Europe, Africa and the Middle East since 2004. The joint venture also includes Laverda’s ownership in Fella, a German manufacturer of grass and hay machinery, and its 50% stake in Gallignani, an Italian manufacturer of balers. The addition of the Fella and Gallignani product lines enables us to provide a comprehensive harvesting offering to our customers. The investment was financed with available cash on hand. We have accounted for the operating joint venture in accordance with Accounting Principle Board Opinion No. 18, “The Equity Method of Accounting for Investments in Common Stock.” See Note 2 to our Consolidated Financial Statements where the Laverda operating joint venture is more fully discussed.

 

On September 10, 2007, we acquired SFIL, a Brazilian company, for approximately 38.0 million Brazilian Reais (or approximately $20.0 million). SFIL is located in Ibirubá, Rio Grande do Sul, Brazil and manufactures and distributes a line of farm implements including drills, planters, corn headers and front loaders. The addition of this line of implements will allow us to leverage the strength of our brands and our dealer networks in the South American region. The acquisition was financed with available cash on hand. The SFIL acquisition has been accounted for in accordance with SFAS No. 141, “Business Combinations.” The results of operations for the SFIL acquisition have been included in our results of operations and balance sheet as of and from the date of acquisition. See Note 2 to our Consolidated Financial Statements where the SFIL acquisition is more fully discussed.

 

Restructuring and Other Infrequent (Income) Expenses

 

We recorded restructuring and other infrequent (income) expenses of $(2.3) million, $1.0 million and $0.0 million for the years ended December 31, 2007, 2006 and 2005, respectively. The income in 2007 primarily related to a $3.2 million gain on the sale of a portion of the buildings, land and improvements associated with our Randers, Denmark facility. The gain was partially offset by $0.9 million of severance,

employee relocation and other facility closure costs associated with the rationalization of our Valtra sales office located in France as well as the rationalization of certain parts, sales and marketing and administrative functions in Germany. The charges in 2006 included severance costs associated with the rationalization of certain parts, sales, marketing and administrative functions in the United Kingdom and Germany, as well as the rationalization of certain Valtra European sales offices located in Denmark, Norway, Germany and the United Kingdom. The net charges in 2005 included a $1.5 million gain on the sale of property, plant and equipment related to the completion of auctions of machinery and equipment associated with the rationalization of our Randers, Denmark combine manufacturing operations. The gain was offset by $0.8 million of employee retention payments and facility closure costs incurred associated with the Randers rationalization, as well as $0.7 million of severance, asset write-downs and other facility closure costs related to the rationalization of our Finnish tractor manufacturing, sales and parts operations. We did not record an income tax benefit or provision associated with the charges or gain relating to the Randers rationalization during 2005 and also did not record a tax provision associated with the gain on the sale of the Randers property during 2007.

 

Randers, Denmark rationalization

 

During the third quarter of 2004, we announced and initiated a plan to restructure our European combine manufacturing operations located in Randers, Denmark in order to reduce the cost and complexity of the Randers manufacturing operation by simplifying the model range and eliminating the facility’s component manufacturing operations. The facility’s component manufacturing operations ceased in February 2005. We now outsource manufacturing of the majority of parts and components to suppliers and have retained critical key assembly operations at the Randers facility. By retaining only the facility assembly operations, we reduced the Randers workforce by 298 employees and permanently eliminated 70% of the square footage utilized. Our plans also included a rationalization of the combine model range assembled in Randers, retaining the production of the high specification, high value combines. We achieved savings of approximately $6.6 million and an additional $2.2 million in 2005 and 2006, respectively, as a result of the rationalization. During 2004, we recorded an $8.2 million write-down of property, plant and equipment associated with the component manufacturing operations in addition to other restructuring charges incurred associated with the rationalization. During 2005, we recorded an additional $0.8 million of restructuring costs related to the rationalization, primarily related to employee retention payments and other facility closure costs. In addition, during 2005, we completed auctions of remaining machinery and equipment and recorded a gain of approximately $1.5 million associated with such actions. The gain was reflected in “Restructuring and other infrequent (income) expenses” within our Consolidated Statements of Operations. During 2007, we sold a portion of the land, buildings and improvements of the Randers facility for proceeds of approximately $4.4 million, and recorded a gain of approximately $3.2 million associated with the sale. The gain was reflected in “Restructuring and other infrequent (income) expenses” within our Consolidated Statements of Operations. As of December 31, 2005, all of the 298 employees had been terminated. The components of the restructuring expenses incurred during 2005 are summarized in Note 3 to our Consolidated Financial Statements.

 

Valtra European sales office rationalizations

 

During the second quarter of 2007, we announced the closure of our Valtra sales office located in France. The closure will result in the termination of approximately 15 employees. This closure is intended to improve our ongoing cost structure and to reduce SG&A expenses. We recorded severance and other facility closure costs of approximately $0.8 million associated with the closure during 2007. Approximately $0.3 million of severance costs had been paid as of December 31, 2007, and 5 of the employees had been terminated. The $0.5 million of severance costs accrued at December 31, 2007 are expected to be paid during 2008.

 

During the second quarter of 2005, we announced that we were changing our distribution arrangements for our Valtra and Fendt products in Scandinavia by entering into a distribution agreement with a third-party distributor to distribute Valtra and Fendt equipment in Sweden and Valtra equipment in Norway and Denmark. As a result of this agreement and the decision to close other Valtra European sales offices, we initiated the restructuring and closure of our Valtra sales offices located in the United Kingdom, Spain, Denmark and Norway, resulting in the termination of 24 employees. The Danish and Norwegian sales offices were

transferred to the third-party Scandinavian equipment distributor in October 2005, which included the transfer of certain employees, assets and lease and supplier contracts. We recorded severance costs, asset write-downs and other facility closure costs of approximately $0.4 million, $0.1 million and $0.1 million, respectively, related to these closures during 2005. During the fourth quarter of 2005, we completed the sale of property, plant and equipment associated with the sales offices in the United Kingdom and Norway and recorded a gain of approximately $0.2 million, which was reflected within “Restructuring and other infrequent (income) expenses” within our Consolidated Statements of Operations. During the first quarter of 2006, we recorded an additional $0.1 million of severance costs related to these closures. As of December 31, 2006, all of the employees had been terminated and all severance and other facility closure costs had been paid. These closures were completed to improve our ongoing cost structure and to reduce SG&A expenses. These rationalizations are more fully described in Note 3 to our Consolidated Financial Statements.

 

German sales office rationalizations

 

During the third quarter of 2006, we announced the closure of two of our sales offices located in Germany, one of which was a Valtra sales office. The closures resulted in the termination of seven employees. These closures were completed to improve our ongoing cost structure and to reduce SG&A expenses. We recorded severance costs of approximately $0.5 million associated with the closures during 2006. During 2007, we recorded additional severance and relocation costs of approximately $0.1 million associated with these closures. As of December 31, 2007, all of the employees had been terminated and all severance costs had been paid. These rationalizations are more fully described in Note 3 to our Consolidated Financial Statements.

 

Coventry, United Kingdom sales and administrative office rationalization

 

During the third quarter of 2006, we initiated the restructuring of certain parts, sales, marketing and administrative functions within our Coventry, United Kingdom location, resulting in the termination of 13 employees. We recorded severance costs of approximately $0.4 million associated with the restructuring during 2006. All employees had been terminated and all severance costs had been paid as of December 31, 2006. This rationalization was completed to improve our ongoing cost structure and to reduce SG&A expenses. This rationalization is more fully described in Note 3 to our Consolidated Financial Statements.

 

Valtra Finland administrative and European parts rationalizations

 

During the fourth quarter of 2004, we initiated the restructuring of certain administrative functions within our Finnish operations, resulting in the termination of 58 employees. During 2004, we recorded severance costs of approximately $1.4 million associated with this rationalization. During 2005, we paid approximately $0.8 million of severance costs. During 2007, we paid an additional $0.3 million of severance costs. As of March 31, 2006, all of the 58 employees had been terminated. The $0.4 million of severance payments accrued at December 31, 2007 are expected to be paid through 2008. In addition, during 2005, we incurred and expensed approximately $0.3 million of contract termination costs associated with the rationalization of our Valtra European parts distribution operations. These rationalizations were completed to improve our ongoing cost structure and SG&A expenses. These rationalizations are more fully described in Note 3 to our Consolidated Financial Statements.

 

Critical Accounting Estimates

 

We prepare our Consolidated Financial Statements in conformity with U.S. generally accepted accounting principles. In the preparation of these financial statements, we make judgments, estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. The significant accounting policies followed in the preparation of the financial statements are detailed in Note 1 to our Consolidated Financial Statements. We believe that our application of the policies discussed below involves significant levels of judgment, estimates and complexity.

Due to the level of judgment, complexity and period of time over which many of these items are resolved, actual results could differ from those estimated at the time of preparation of the financial statements. Adjustments to these estimates would impact our financial position and future results of operations.

 

Allowance for Doubtful Accounts

 

We determine our allowance for doubtful accounts by actively monitoring the financial condition of our customers to determine the potential for any nonpayment of trade receivables. In determining our allowance for doubtful accounts, we also consider other economic factors, such as aging trends. We believe that our process of specific review of customers combined with overall analytical review provides an effective evaluation of ultimate collectibility of trade receivables. Our loss or write-off experience was approximately 0.1% of net sales in 2007.

 

Discount and Sales Incentive Allowances

 

We provide various incentive programs with respect to our products. These incentive programs include reductions in invoice prices, reductions in retail financing rates, dealer commissions, dealer incentive allowances and volume discounts. In most cases, incentive programs are established and communicated to our dealers on a quarterly basis. The incentives are paid either at the time of invoice (through a reduction of invoice price), at the time of the settlement of the receivable, at the time of retail financing, at the time of warranty registration, or at a subsequent time based on dealer purchases. The incentive programs are product line specific and generally do not vary by dealer. The cost of sales incentives associated with dealer commissions and dealer incentive allowances is estimated based upon the terms of the programs and historical experience, is based on a percentage of the sales price, and is recorded at the later of (a) the date at which the related revenue is recognized, or (b) the date at which the sales incentive is offered. The related provisions and accruals are made on a product or product line basis and are monitored for adequacy and revised at least quarterly in the event of subsequent modifications to the programs. Volume discounts are estimated and recognized based on historical experience, and related reserves are monitored and adjusted based on actual dealer purchases and the dealers’ progress towards achieving specified cumulative target levels. The Company records the cost of interest subsidy payments, which is a reduction in the retail financing rates, at the later of (a) the date at which the related revenue is recognized, or (b) the date at which the sales incentive is offered. Estimates of these incentives are based on the terms of the programs and historical experience. All incentive programs are recorded and presented as a reduction of revenue due to the fact that we do not receive an identifiable benefit in exchange for the consideration provided. Reserves for incentive programs that will be paid either through the reduction of future invoices or through credit memos are recorded as “accounts receivable allowances” within our Consolidated Balance Sheet. Reserves for incentive programs that will be paid in cash, as is the case with most our volume discount programs, are recorded within “Accrued expenses” within our Consolidated Balance Sheet.

 

At December 31, 2007, we had recorded an allowance for discounts and sales incentives of approximately $107.9 million. If we were to allow an additional 1% of sales incentives and discounts at the time of retail sale, for those sales subject to such discount programs, our reserve would increase by approximately $8.8 million as of December 31, 2007. Conversely, if we were to decrease our sales incentives and discounts by 1% at the time of retail sale, our reserve would decrease by approximately $8.8 million as of December 31, 2007.

 

Inventory Reserves

 

Inventories are valued at the lower of cost or market using the first-in, first-out method. Market is current replacement cost (by purchase or by reproduction dependent on the type of inventory). In cases where market exceeds net realizable value (i.e., estimated selling price less reasonably predictable costs of completion and disposal), inventories are stated at net realizable value. Market is not considered to be less than net realizable value reduced by an allowance for an approximately normal profit margin. Determination of cost includes estimates for surplus and obsolete inventory based on estimates of future sales and production. Changes in

demand and product design can impact these estimates. We periodically evaluate and update our assumptions when assessing the adequacy of inventory adjustments.

 

Deferred Income Taxes and Uncertain Income Tax Positions

 

We establish valuation allowances for deferred tax assets when we estimate it is more likely than not that the tax assets will not be realized. We base these estimates on projections of future income, including tax-planning strategies, in certain tax jurisdictions. Changes in industry conditions and the competitive environment may impact the accuracy of our projections. SFAS No. 109 requires the establishment of a valuation allowance when it is more likely than not that some portion or all of the deferred tax assets will not be realized. In accordance with SFAS No. 109, we periodically assess the likelihood that our deferred tax assets will be recovered from estimated future taxable income and available tax planning strategies and determine if adjustments to the valuation allowance are appropriate. As a result of these assessments, there are certain tax jurisdictions where we do not benefit further losses. We have not benefited losses generated in the United States in 2007, 2006 or 2005. During the fourth quarter of 2005, we recognized a non-cash deferred income tax charge of $90.8 million related to increasing the valuation allowance against our United States deferred tax assets. In accordance with SFAS No. 109, we assessed the likelihood that our United States deferred tax assets would be recovered from future taxable income and determined that an adjustment to the valuation allowance was appropriate. At December 31, 2007 and 2006, we had gross deferred tax assets of $479.1 million and $472.5 million, respectively, including $247.8 million and $246.6 million, respectively, related to net operating loss carryforwards. At December 31, 2007 and 2006, we had recorded total valuation allowances as an offset to the gross deferred tax assets of $315.3 million and $291.4 million, respectively, primarily related to net operating loss carryforwards in Brazil, Denmark and the United States. Realization of the remaining deferred tax assets as of December 31, 2007 depends on generating sufficient taxable income in future periods, net of reversing deferred tax liabilities. We believe it is more likely than not that the remaining net deferred tax assets will be realized.

 

In 2006, the FASB issued FIN 48. FIN 48 clarifies the accounting for uncertainty in income taxes recognized in an enterprise’s financial statements in accordance with SFAS No. 109. FIN 48 also prescribes a recognition threshold and measurement of a tax position taken or expected to be taken in an enterprise’s tax return. FIN 48 is effective for fiscal years beginning after December 15, 2006. Accordingly, we adopted the provisions of FIN 48 on January 1, 2007. As a result of our implementation of FIN 48, we did not recognize a material adjustment with respect to liabilities for unrecognized tax benefits. At December 31, 2007, we had approximately $22.7 million of unrecognized tax benefits, all of which would impact our effective tax rate if recognized. As of December 31, 2007, we had approximately $14.0 million of current accrued taxes related to uncertain income tax positions connected with ongoing tax audits in various jurisdictions that we expect to settle or pay in the next 12 months. We recognize interest and penalties related to uncertain income tax positions in income tax expense. As of December 31, 2007, we had accrued interest and penalties related to unrecognized tax benefits of $1.1 million. See Note 6 to our Consolidated Financial Statements for further discussion of our adoption of FIN 48. We maintain procedures designed to appropriately reflect uncertain income tax positions in our Consolidated Financial Statements in accordance with the provisions of FIN 48. These procedures include the evaluation of uncertainties both internally and, as necessary, externally with third party advisors.

 

Warranty and Additional Service Actions

 

We make provisions for estimated expenses related to product warranties at the time products are sold. We base these estimates on historical experience of the nature, frequency and average cost of warranty claims. In addition, the number and magnitude of additional service actions expected to be approved, and policies related to additional service actions, are taken into consideration. Due to the uncertainty and potential volatility of these estimated factors, changes in our assumptions could materially affect net income.

 

Our estimate of warranty obligations is reevaluated on a quarterly basis. Experience has shown that initial data for any product series line can be volatile; therefore, our process relies upon long-term historical averages until sufficient data is available. As actual experience becomes available, it is used to modify the historical

averages to ensure that the forecast is within the range of likely outcomes. Resulting balances are then compared with present spending rates to ensure that the accruals are adequate to meet expected future obligations.

 

See Note 1 to our Consolidated Financial Statements for more information regarding costs and assumptions for warranties.

 

Insurance Reserves

 

We provide insurance reserves for our estimates of losses due to claims for worker’s compensation, product liability and other liabilities for which we are self-insured. We base these estimates on the ultimate settlement amount of claims, which often have long periods of resolution. We closely monitor the claims to maintain adequate reserves.

 

Pensions

 

We have defined benefit pension plans covering certain employees principally in the United States, the United Kingdom, Germany, Finland, Norway, France, Australia and Argentina. Our primary plans cover certain employees in the United States and the United Kingdom.

 

In the United States, we sponsor a funded, qualified pension plan for our salaried employees, as well as a separate funded qualified pension plan for our hourly employees. Both plans are frozen, and we fund at least the minimum contributions required under the Employee Retirement Income Security Act of 1974 and the Internal Revenue Code to both plans. In addition, we sponsor an unfunded, nonqualified pension plan for our executives.

 

In the United Kingdom, we sponsor a funded pension plan that provides an annuity benefit based on participants’ final average earnings and service. Participation in this plan is limited to certain older, longer service employees and existing retirees. No future employees will participate in this plan. See Note 8 to our Consolidated Financial Statements for more information regarding costs and assumptions for employee retirement benefits.

 

Nature of Estimates Required.  The measurement of our pension obligations, costs and liabilities is dependent on a variety of assumptions provided by management and used by our actuaries. These assumptions include estimates of the present value of projected future pension payments to all plan participants, taking into consideration the likelihood of potential future events such as salary increases and demographic experience. These assumptions may have an effect on the amount and timing of future contributions.

 

Assumptions and Approach Used.  The assumptions used in developing the required estimates include the following key factors:

 

 

For the years ended December 31, 2007 and 2006, we based the discount rate used to determine the projected benefit obligation for our U.S. pension plans by matching the projected cash flows of our plans to the Citigroup Pension Discount Curve. Prior to December 31, 2006, we based the discount rate used to determine the projected benefit obligation for our U.S. pension plans on the Moody’s Investor Service Aa bond yield as of December 31 of each year. For our non-U.S. plans, we based the discount rate on comparable indices within each of those countries, such as the 15-year iBoxx AA corporate bond yield in the United Kingdom. The indices used in the United States, the United Kingdom and other countries were chosen to match our expected plan obligations and related expected cash flows. The measurement date with respect to our U.K. pension plan is September 30 of each year. The measurement date with respect to our U.S. pension plan and all other defined benefit plans is December 31 of each year. We adopted the provisions of SFAS No. 158, “Employers’ Accounting for Defined Benefit Pension and Other Postretirement Plans — an amendment of FASB Statements No. 87, 88, 106 and 132(R)” (“SFAS No. 158”), as of the year ended

December 31, 2006. SFAS No. 158 will require the measurement of all defined benefit plan assets and obligations as of the date of our fiscal year end for years ending after December 15, 2008, and, therefore, the measurement date with respect to our U.K. pension plan will change upon adoption of that provision during 2008. Our inflation assumption is based on an evaluation of external market indicators. The salary growth assumptions reflect our long-term actual experience, the near-term outlook and assumed inflation. The expected return on plan asset assumptions reflects asset allocations, investment strategy, historical experience and the views of investment managers. Retirement and termination rates are based primarily on actual plan experience and actuarial standards of practice. The mortality rates for the U.S. plans were updated during 2006 to reflect the most recent study released by the Society of Actuaries, which reflects pensioner experience and distinctions for blue and white collar employees. The effects of actual results differing from our assumptions are accumulated and amortized over future periods and, therefore, generally affect our recognized expense in such periods.

 

Our U.S. and U.K. pension plans represent approximately 91% of our consolidated projected benefit obligation as of December 31, 2007. If the discount rate used to determine the 2007 projected benefit obligation for our U.S. plans was decreased by 25 basis points, our projected benefit obligation would have increased by approximately $1.1 million at December 31, 2007, and our 2008 pension expense would increase by a nominal amount. If the discount rate used to determine the 2007 projected benefit obligation for our U.S. plans was increased by 25 basis points, our projected benefit obligation would have decreased by approximately $1.0 million, and our 2008 pension expense would decrease by a nominal amount. If the discount rate used to determine the projected benefit obligation for our U.K. plan was decreased by 25 basis points, our projected benefit obligation would have increased by approximately $25.7 million at December 31, 2007, and our 2008 pension expense would increase by approximately $2.3 million. If the discount rate used to determine the projected benefit obligation for our U.K. plan was increased by 25 basis points, our projected benefit obligation would have decreased by approximately $25.1 million at December 31, 2007, and our 2008 pension expense would decrease by approximately $2.3 million.

 

Unrecognized actuarial losses related to our pension plans were $126.9 million as of December 31, 2007 compared to $241.4 million as of December 31, 2006. The decrease in unrecognized losses between years primarily reflects increasing discount rates worldwide and gains as a result of better than expected asset returns, partially offset by currency translation. The unrecognized actuarial losses will be impacted in future periods by actual asset returns, discount rate changes, currency exchange rate fluctuations, actual demographic experience and certain other factors. These losses will be amortized on a straight-line basis over the average remaining service period of active employees expected to receive benefits under most of our defined benefit pension plans. For some plans, the population covered is predominantly inactive participants, and losses related to those plans will be amortized over the average remaining lives of those participants while covered by the respective plan. As of December 31, 2007, the average amortization period was 16 years for our U.S. pension plans, and 10 years for our non-U.S. pension plans. The estimated net actuarial loss for defined benefit pension plans that will be amortized from our accumulated other comprehensive loss during the year ended December 31, 2008 is approximately $5.6 million compared to approximately $14.9 million during the year ended December 31, 2007.

 

The weighted average asset allocation of our U.S. pension benefit plans at December 31, 2007 and 2006 are as follows:

 

The weighted average asset allocation of our non-U.S. pension benefit plans at December 31, 2007 and 2006 are as follows:

 

 

All tax — qualified pension fund investments in the United States are held in the AGCO Corporation Master Pension Trust. Our global pension fund strategy is to diversify investments across broad categories of equity and fixed income securities with appropriate use of alternative investment categories to minimize risk and volatility. Our U.S. target allocation of retirement fund investments is 35% large and small cap domestic equity securities, 15% international equity securities, 20% domestic fixed income securities and 30% invested in other investments. We have noted that over very long periods, this mix of investments would achieve an average return in excess of 9%. In arriving at the choice of an expected return assumption of 8% for our U.S. — based plans, we have tempered this historical indicator with lower expectations for returns on equity investments in the future as well as considered administrative costs of the plans. To date, we have not invested pension funds in our own common stock, and we have no intention of doing so in the future. Our non-U.S. target allocation of retirement fund investments is 50% equity securities, 30% fixed income securities and 20% invested in other investments. The majority of our non-U.S. pension fund investments are related to our pension plan in the United Kingdom. We have noted that over very long periods, this target mix of investments would achieve an average return in excess of 7.5%. In arriving at the choice of an expected return assumption of 7% for our U.K. pension plan, we have tempered this historical indicator with a slightly lower expectation of future returns on equity investments as well as plan expenses.

 

As of December 31, 2007, we had approximately $119.2 million in unfunded or underfunded obligations related to our pension plans, due primarily to our pension plan in the United Kingdom. In 2007, we contributed approximately $37.1 million towards those obligations, and we expect to fund approximately $33.8 million in 2008. Future funding is dependent upon compliance with local laws and regulations and changes to those laws and regulations in the future, as well as the generation of operating cash flows in the future. We currently have an agreement in place with the trustees of the U.K. defined benefit plan that obligates us to fund approximately £10.0 to £12.0 million per year (or approximately $19.9 to $23.8 million) towards that obligation for the next 11 years. The funding arrangement is based upon the current underfunded status and could change in the future as discount rates, local laws and regulations and other factors change.

 

Other Postretirement Benefits (Retiree Health Care and Life Insurance)

 

We provide certain postretirement health care and life insurance benefits for certain employees, principally in the United States. Participation in these plans has been limited to older employees and existing retirees. See Note 8 to our Consolidated Financial Statements for more information regarding costs and assumptions for other postretirement benefits.

 

Nature of Estimates Required.  The measurement of our obligations, costs and liabilities associated with other postretirement benefits, such as retiree health care and life insurance, requires that we make use of estimates of the present value of the projected future payments to all participants, taking into consideration the likelihood of potential future events such as health care cost increases and demographic experience, which may have an effect on the amount and timing of future payments.

 

Assumptions and Approach Used.  The assumptions used in developing the required estimates include the following key factors:

 

Our health care cost trend assumptions are developed based on historical cost data, the near-term outlook, efficiencies and other cost-mitigating actions, including further employee cost sharing, administrative improvements and other efficiencies, and an assessment of likely long-term trends. For the years ended December 31, 2007 and 2006, we based the discount rate used to determine the projected benefit obligation for our U.S. postretirement benefit plans by matching the projected cash flows of our plans to the Citigroup Pension Discount Curve. Prior to December 31, 2006, we based the discount rate used to determine the projected benefit obligation for our U.S. postretirement benefit plans on the Moody’s Investor Service Aa bond yield as of December 31 of each year. The index used was chosen to match our expected plan obligations and related expected cash flows. Our inflation assumption is based on an evaluation of external market indicators. Retirement and termination rates are based primarily on actual plan experience and actuarial standards of practice. The mortality rates were updated during 2006 to reflect the most recent study released by the Society of Actuaries, which reflects pensioner experience and distinctions for blue and white collar employees. The effects of actual results differing from our assumptions are accumulated and amortized over future periods and, therefore, generally affect our recognized expense in such future periods.

 

If the discount rate used to determine the 2007 projected benefit obligation for our U.S. postretirement benefit plans was decreased by 25 basis points, our projected benefit obligation would have increased by approximately $0.7 million at December 31, 2007, and our 2008 postretirement benefit expense would increase by a nominal amount. If the discount rate used to determine the 2007 projected benefit obligation for our U.S. postretirement benefit plans was increased by 25 basis points, our projected benefit obligation would have decreased by approximately $0.6 million, and our 2008 pension expense would decrease by a nominal amount.

 

Unrecognized actuarial losses related to our U.S. postretirement benefit plans were $4.3 million as of December 31, 2007 compared to $3.7 million as of December 31, 2006. The increase in losses primarily reflects higher than expected medical claims during 2007 and an increase in our assumptions regarding future medical costs. These losses were partially offset by an increase in the discount rate as of December 31, 2007. The unrecognized actuarial losses will be impacted in future periods by discount rate changes, actual demographic experience, actual health care inflation and certain other factors. These losses will be amortized on a straight-line basis over the average remaining service period of active employees expected to receive benefits, or the average remaining lives of inactive participants, covered under the postretirement benefit plans. As of December 31, 2007, the average amortization period was 14 years for our U.S. postretirement benefit plans. The estimated net actuarial loss for postretirement health care benefits that will be amortized from our accumulated other comprehensive loss during the year ended December 31, 2008 is approximately $0.2 million, compared to approximately $0.1 million during the year ended December 31, 2007.

 

As of December 31, 2007, we had approximately $25.6 million in unfunded obligations related to our U.S. postretirement health and life insurance benefit plans. In 2007, we made benefit payments of approximately $2.1 million towards these obligations, and we expect to make benefit payments of approximately $2.1 million towards these obligations in 2008.

 

For measuring the expected postretirement benefit obligation at December 31, 2007, we assumed a 9% health care cost trend rate for 2008, decreasing 1% per year to 5% and remaining at that level thereafter. Changing the assumed health care cost trend rates by one percentage point each year and holding all other assumptions constant would have the following effect to service and interest cost for 2008 and the accumulated postretirement benefit obligation at December 31, 2007 (in millions):

 

 

Litigation

 

We are party to various claims and lawsuits arising in the normal course of business. We closely monitor these claims and lawsuits and frequently consult with our legal counsel to determine whether or not they may, when resolved, have a material adverse effect on our financial position or results of operations.

Goodwill and Indefinite-Lived Assets

 

SFAS No. 142 establishes a method of testing goodwill and other indefinite-lived intangible assets for impairment on an annual basis or on an interim basis if an event occurs or circumstances change that would reduce the fair value of a reporting unit below its carrying value. Our initial assessment and our annual assessments involve determining an estimate of the fair value of our reporting units in order to evaluate whether an impairment of the current carrying amount of goodwill and other indefinite-lived intangible assets exists. The first step of the goodwill impairment test, used to identify potential impairment, compares the fair value of a reporting unit with its carrying amount, including goodwill. If the fair value of a reporting unit exceeds its carrying amount, goodwill of the reporting unit is not considered impaired, and thus the second step of the impairment is unnecessary. If the carrying amount of a reporting unit exceeds its fair value, the second step of the goodwill impairment test is performed to measure the amount of impairment loss, if any. Fair values are derived based on an evaluation of past and expected future performance of our reporting units. A reporting unit is an operating segment or one level below an operating segment (e.g., a component). A component of an operating segment is a reporting unit if the component constitutes a business for which discrete financial information is available and our executive management team regularly reviews the operating results of that component. In addition, we combine and aggregate two or more components of an operating segment as a single reporting unit if the components have similar economic characteristics. Our reportable segments reported under the guidance of SFAS No. 131, “Disclosures about Segments of an Enterprise and Related Information,” are not our reporting units, with the exception of our Asia/Pacific and South American geographical segments.

 

The second step of the goodwill impairment test, used to measure the amount of impairment loss, compares the implied fair value of the reporting unit goodwill with the carrying amount of that goodwill. If the carrying amount of the reporting unit goodwill exceeds the implied fair value of that goodwill, an impairment loss is recognized in an amount equal to that excess. The loss recognized cannot exceed the carrying amount of goodwill. The implied fair value of goodwill is determined in the same manner as the amount of goodwill recognized in a business combination is determined. That is, we allocate the fair value of a reporting unit to all of the assets and liabilities of that unit (including any unrecognized intangible assets) as if the reporting unit had been acquired in a business combination and the fair value of the reporting unit was the price paid to acquire the reporting unit. The excess of the fair value of a reporting unit over the amounts assigned to its assets and liabilities is the implied fair value of goodwill.

 

We utilized a combination of valuation techniques, including a discounted cash flow approach and a market multiple approach, when making our annual and interim assessments. As stated above, goodwill is tested for impairment on an annual basis and more often if indications of impairment exist. The results of our analyses conducted as of October 1, 2007 and 2005 indicated that no reduction in the carrying amount of goodwill was required. During 2006, sales and operating income of our Sprayer operations declined significantly as compared to prior years. This was primarily due to increased competition resulting from updated product offerings from our major competitors and a shift in industry demand away from our strength in the commercial application segment to the farmer-owned segment. In addition, our projections for the Sprayer operations did not result in a valuation sufficient to support the carrying amount of the goodwill balance on our Consolidated Balance Sheet, as there was no excess fair value of the reporting unit over the amounts assigned to its assets and liabilities that could be allocated to the implied fair value of goodwill. As a result, we concluded that the goodwill associated with our Sprayer operations was impaired, and recognized a write-down of the total amount of recorded goodwill of approximately $171.4 million during the fourth quarter of 2006. The results of our analyses conducted as of October 1, 2006 associated with our other reporting units indicated that no reduction in their carrying amounts of goodwill was required.

 

Liquidity and Capital Resources

 

Our financing requirements are subject to variations due to seasonal changes in inventory and receivable levels. Internally generated funds are supplemented when necessary from external sources, primarily our revolving credit facility and accounts receivable securitization facilities.

Our current financing and funding sources, with balances outstanding as of December 31, 2007, are our $201.3 million principal amount 11/4% convertible senior subordinated notes due 2036, $201.3 million principal amount 13/4% convertible senior subordinated notes due 2033, €200.0 million (or approximately $291.8 million) principal amount 67/8% senior subordinated notes due 2014, approximately $495.9 million of accounts receivable securitization facilities (with approximately $446.3 million in outstanding funding as of December 31, 2007), and a $300.0 million multi-currency revolving credit facility (with no amounts outstanding as of December 31, 2007).

 

On December 4, 2006, we issued $201.3 million of 11/4% convertible senior subordinated notes due December 15, 2036 and received proceeds of approximately $196.4 million, after related fees and expenses. The notes are unsecured obligations and are convertible into cash and shares of our common stock upon satisfaction of certain conditions, as discussed below. The notes provide for (i) the settlement upon conversion in cash up to the principal amount of the notes with any excess conversion value settled in shares of our common stock, and (ii) the conversion rate to be increased under certain circumstances if the notes are converted in connection with certain change of control transactions occurring prior to December 15, 2013. Interest is payable on the notes at 11/4% per annum, payable semi-annually in arrears in cash on June 15 and December 15 of each year. The notes are convertible into shares of our common stock at an effective price of $40.73 per share, subject to adjustment. This reflects an initial conversion rate for the notes of 24.5525 shares of common stock per $1,000 principal amount of notes. In the event of a stock dividend, split of our common stock or certain other dilutive events, the conversion rate will be adjusted so that upon conversion of the notes, holders of the notes would be entitled to receive the same number of shares of common stock that they would have been entitled to receive if they had converted the notes into our common stock immediately prior to such events. If a change of control transaction that qualifies as a “fundamental change” occurs on or prior to December 15, 2013, under certain circumstances we will increase the conversion rate for the notes converted in connection with the transaction by a number of additional shares (as used in this paragraph, the “make whole shares”). A fundamental change is any transaction or event in connection with which 50% or more of our common stock is exchanged for, converted into, acquired for or constitutes solely the right to receive consideration that is not at least 90% common stock listed on a U.S. national securities exchange, or approved for quotation on an automated quotation system. The amount of the increase in the conversion rate, if any, will depend on the effective date of the transaction and an average price per share of our common stock as of the effective date. No adjustment to the conversion rate will be made if the price per share of common stock is less than $31.33 per share or more than $180.00 per share. The number of additional make whole shares range from 7.3658 shares per $1,000 principal amount at $31.33 per share to 0.1063 shares per $1,000 principal amount at $180.00 per share for the year ended December 15, 2008, with the number of make whole shares generally declining over time. If the acquirer or certain of its affiliates in the fundamental change transaction has publicly traded common stock, we may, instead of increasing the conversion rate as described above, cause the notes to become convertible into publicly traded common stock of the acquirer, with principal of the notes to be repaid in cash, and the balance, if any, payable in shares of such acquirer common stock. At no time will we issue an aggregate number of shares of our common stock upon conversion of the notes in excess of 31.9183 shares per $1,000 principal amount thereof. If the holders of our common stock receive only cash in a fundamental change transaction, then holders of notes will receive cash as well. Holders may convert the notes only under the following circumstances: (1) during any fiscal quarter, if the closing sales price of our common stock exceeds 120% of the conversion price for at least 20 trading days in the 30 consecutive trading days ending on the last trading day of the preceding fiscal quarter; (2) during the five business day period after a five consecutive trading day period in which the trading price per note for each day of that period was less than 98% of the product of the closing sale price of our common stock and the conversion rate; (3) if the notes have been called for redemption; or (4) upon the occurrence of certain corporate transactions. Beginning December 15, 2013, we may redeem any of the notes at a redemption price of 100% of their principal amount, plus accrued interest. Holders of the notes may require us to repurchase the notes at a repurchase price of 100% of their principal amount, plus accrued interest, on December 15, 2013, 2016, 2021, 2026 and 2031. Holders may also require us to repurchase all or a portion of the notes upon a fundamental change, as defined in the indenture, at a repurchase price equal to 100% of the principal amount of the notes to be repurchased, plus any accrued and unpaid interest. The notes are senior subordinated obligations and are subordinated to all

of our existing and future senior indebtedness and effectively subordinated to all debt and other liabilities of our subsidiaries. The notes are equal in right of payment with our 67/8% senior subordinated notes due 2014 and our 13/4% convertible senior subordinated notes due 2033.

 

We used the net proceeds received from the issuance of the 11/4% convertible senior subordinated notes, as well as available cash, to repay $196.9 million of our outstanding United States dollar denominated term loan and €79.1 million of our outstanding Euro denominated term loan. In addition, we recorded interest expense of approximately $2.0 million for the proportionate write-off of deferred debt issuance costs associated with the term loan balances that were repaid. Our United States dollar denominated and Euro denominated term loans are discussed further below.

 

On June 29, 2005, we exchanged our $201.3 million of 13/4% convertible senior subordinated notes due 2033 for new notes which provide for (i) the settlement upon conversion in cash up to the principal amount of the converted new notes with any excess conversion value settled in shares of our common stock, and (ii) the conversion rate to be increased under certain circumstances if the new notes are converted in connection with certain change of control transactions occurring prior to December 10, 2010, but otherwise are substantially the same as the old notes. The notes are unsecured obligations and are convertible into cash and shares of our common stock upon satisfaction of certain conditions, as discussed below. Interest is payable on the notes at 13/4% per annum, payable semi-annually in arrears in cash on June 30 and December 31 of each year. The notes are convertible into shares of our common stock at an effective price of $22.36 per share, subject to adjustment. This reflects an initial conversion rate for the notes of 44.7193 shares of common stock per $1,000 principal amount of notes. In the event of a stock dividend, split of our common stock or certain other dilutive events, the conversion rate will be adjusted so that upon conversion of the notes, holders of the notes would be entitled to receive the same number of shares of common stock that they would have been entitled to receive if they had converted the notes into our common stock immediately prior to such events. If a change of control transaction that qualifies as a “fundamental change” occurs on or prior to December 31, 2010, under certain circumstances we will increase the conversion rate for the notes converted in connection with the transaction by a number of additional shares (as used in this paragraph, the “make whole shares”). A fundamental change is any transaction or event in connection with which 50% or more of our common stock is exchanged for, converted into, acquired for or constitutes solely the right to receive consideration that is not at least 90% common stock listed on a U.S. national securities exchange or approved for quotation on an automated quotation system. The amount of the increase in the conversion rate, if any, will depend on the effective date of the transaction and an average price per share of our common stock as of the effective date. No adjustment to the conversion rate will be made if the price per share of common stock is less than $17.07 per share or more than $110.00 per share. The number of additional make whole shares range from 13.2 shares per $1,000 principal amount at $17.07 per share to 0.1 shares per $1,000 principal amount at $110.00 per share for the year ended December 31, 2008, with the number of make whole shares generally declining over time. If the acquirer or certain of its affiliates in the fundamental change transaction has publicly traded common stock, we may, instead of increasing the conversion rate as described above, cause the notes to become convertible into publicly traded common stock of the acquirer, with principal of the notes to be repaid in cash, and the balance, if any, payable in shares of such acquirer common stock. At no time will we issue an aggregate number of shares of our common stock upon conversion of the notes in excess of 58.5823 shares per $1,000 principal amount thereof. If the holders of our common stock receive only cash in a fundamental change transaction, then holders of notes will receive cash as well. Holders may convert the notes only under the following circumstances: (1) during any fiscal quarter, if the closing sales price of our common stock exceeds 120% of the conversion price for at least 20 trading days in the 30 consecutive trading days ending on the last trading day of the preceding fiscal quarter; (2) during the five business day period after a five consecutive trading day period in which the trading price per note for each day of that period was less than 98% of the product of the closing sale price of our common stock and the conversion rate; (3) if the notes have been called for redemption; or (4) upon the occurrence of certain corporate transactions. Beginning January 1, 2011, we may redeem any of the notes at a redemption price of 100% of their principal amount, plus accrued interest. Holders of the notes may require us to repurchase the notes at a repurchase price of 100% of their principal amount, plus accrued interest, on December 31, 2010, 2013, 2018, 2023 and 2028.

The impact of the exchange completed in June 2005, as discussed above, reduced the diluted weighted average shares outstanding in future periods. The initial reduction in the diluted shares was approximately 9.0 million shares but varies based on our stock price, once the market price trigger or other specified conversion circumstances have been met.

 

As of December 31, 2007, the closing sales price of our common stock had exceeded 120% of the conversion price of $22.36 and $40.73 per share, respectively, for our 13/4% convertible senior subordinated notes and our 11/4% convertible senior subordinated notes for at least 20 trading days in the 30 consecutive trading days ending December 31, 2007, and, therefore, we classified both notes as current liabilities. Future classification of the notes between current and long-term debt is dependent on the closing sales price of our common stock during future quarters. We believe it is unlikely the holders of the notes would convert the notes under the provisions of the indenture agreement, as typically convertible securities are not converted prior to expiration unless called for redemption, thereby requiring us to repay the principal portion in cash. In the event the notes were converted, we believe we could repay the notes with available cash on hand, funds from our existing $300.0 million multi-currency revolving credit facility or a combination of these sources.

 

We redeemed our $250 million 91/2% senior notes on June 23, 2005 at a price of approximately $261.9 million, which represented a premium of 4.75% over the senior notes face amount. The premium of approximately $11.9 million was reflected in interest expense, net during the second quarter of 2005. In connection with the redemption, we also wrote off the remaining balance of deferred debt issuance costs of approximately $2.2 million. The funding sources for the redemption was a combination of cash generated from the transfer of wholesale interest-bearing receivables to our United States and Canadian retail finance joint ventures, AGCO Finance LLC and AGCO Finance Canada, Ltd., as discussed below, revolving credit facility borrowings, and available cash on hand.

 

On January 5, 2004, we entered into a credit facility that provides for a $300.0 million multi-currency revolving credit facility, a $300.0 million United States dollar denominated term loan and a €120.0 million Euro denominated term loan. The maturity date of the revolving credit facility is December 2008 and the maturity date for the term loan facility was June 2009. We anticipate entering into a new revolving credit facility in 2008 to replace the current revolving credit facility. We were required to make quarterly payments towards the United States dollar denominated term loan and Euro denominated term loan of $0.75 million and €0.3 million, respectively (or an amortization of one percent per annum until the maturity date of each term loan). On June 29, 2007, we repaid the remaining balances of our outstanding United States dollar and Euro denominated term loans, totaling $72.5 million and €28.6 million, respectively, with available cash on hand. The revolving credit facility is secured by a majority of our U.S., Canadian, Finnish and U.K. — based assets and a pledge of a portion of the stock of our domestic and material foreign subsidiaries. Interest accrues on amounts outstanding under the revolving credit facility, at our option, at either (1) LIBOR plus a margin ranging between 1.25% and 2.0% based upon our senior debt ratio or (2) the higher of the administrative agent’s base lending rate or one-half of one percent over the federal funds rate plus a margin ranging between 0.0% and 0.75% based on our senior debt ratio. Interest accrued on amounts outstanding under the term loans at LIBOR plus 1.75%. The credit facility contains covenants restricting, among other things, the incurrence of indebtedness and the making of certain payments, including dividends. We also must fulfill financial covenants including, among others, a total debt to EBITDA ratio, a senior debt to EBITDA ratio and a fixed charge coverage ratio, as defined in the facility. As of December 31, 2007, we had no outstanding borrowings under the multi-currency revolving credit facility. As of December 31, 2007, we had availability to borrow $291.1 million under the revolving credit facility. As of December 31, 2006, we had total borrowings of $111.4 million under the credit facility, which included $73.3 million under the United States dollar denominated term loan facility, €28.9 million (approximately $38.1 million) under the Euro denominated term loan facility and no amounts outstanding under the multi-currency revolving credit facility. As of December 31, 2006, we had availability to borrow $292.2 million under the revolving credit facility.

 

On April 23, 2004, we sold €200.0 million of 67/8% senior subordinated notes due 2014 and received proceeds of approximately $234.0 million, after offering related fees and expenses. The 67/8% senior subordinated notes are unsecured obligations and are subordinated in right of payment to any existing or future senior indebtedness. Interest is payable on the notes semi-annually on April 15 and October 15 of each year.

Beginning April 15, 2009, we may redeem the notes, in whole or in part, initially at 103.438% of their principal amount, plus accrued interest, declining to 100% of their principal amount, plus accrued interest, at any time on or after April 15, 2012. In addition, before April 15, 2009, we may redeem the notes, in whole or in part, at a redemption price equal to 100% of the principal amount, plus accrued interest and a make-whole premium. The notes include covenants restricting the incurrence of indebtedness and the making of certain restricted payments, including dividends.

 

Under our securitization facilities, we sell accounts receivable in the United States, Canada and Europe on a revolving basis to commercial paper conduits through a wholly-owned special purpose U.S. subsidiary and a qualifying special purpose entity (“QSPE”) in the United Kingdom. The United States and Canadian securitization facilities expire in April 2009 and the European facility expires in October 2011, but each is subject to annual renewal. As of December 31, 2007, the aggregate amount of these facilities was $495.9 million. The outstanding funded balance of $446.3 million as of December 31, 2007 has the effect of reducing accounts receivable and short-term liabilities by the same amount. Our risk of loss under the securitization facilities is limited to a portion of the unfunded balance of receivables sold, which is approximately 15% of the funded amount. We maintain reserves for doubtful accounts associated with this risk. If the facilities were terminated, we would not be required to repurchase previously sold receivables but would be prevented from selling additional receivables to the commercial paper conduits.

 

These facilities allow us to sell accounts receivables through financing conduits, which obtain funding from commercial paper markets. Future funding under securitization facilities depends upon the adequacy of receivables, a sufficient demand for the underlying commercial paper and the maintenance of certain covenants concerning the quality of the receivables and our financial condition. In the event commercial paper demand is not adequate, our securitization facilities provide for liquidity backing from various financial institutions, including Rabobank. These liquidity commitments would provide us with interim funding to allow us to find alternative sources of working capital financing, if necessary.

 

In May 2005, we completed an agreement to permit transferring, on an ongoing basis, the majority of our wholesale interest-bearing receivables in North America to our United States and Canadian retail finance joint ventures, AGCO Finance LLC and AGCO Finance Canada, Ltd. We have a 49% ownership interest in these joint ventures. The transfer of the wholesale interest-bearing receivables is without recourse to AGCO and we will continue to service the receivables. The initial transfer of wholesale interest-bearing receivables resulted in net proceeds of approximately $94 million, which were used to redeem our $250 million 91/2% senior notes. As of December 31, 2007 and 2006, the balance of interest-bearing receivables transferred to AGCO Finance LLC and AGCO Finance Canada, Ltd. under this agreement was approximately $73.3 million and $124.1 million, respectively.

 

Our business is subject to substantial cyclical variations, which generally are difficult to forecast. Our results of operations may also vary from time to time resulting from costs associated with rationalization plans and acquisitions. As a result, we have had to request relief from our lenders on occasion with respect to financial covenant compliance. While we do not currently anticipate asking for any relief, it is possible that we would require relief in the future. Based upon our historical working relationship with our lenders, we currently do not anticipate any difficulty in obtaining that relief.

 

Cash flow provided by operating activities was $504.3 million during 2007, compared to $442.2 million during 2006. Our cash flows in 2007 were higher than 2006 primarily due to higher net income in 2007 compared to 2006. In 2007 and 2006, cash flow provided by operating activities was improved by a reduction in net working capital.

 

Our working capital requirements are seasonal, with investments in working capital typically building in the first half of the year and then reducing in the second half of the year. We had $638.4 million in working capital at December 31, 2007, as compared with $685.4 million at December 31, 2006. Accounts receivable and inventories, combined, at December 31, 2007 were $158.6 million higher than at December 31, 2006. Cash on hand at December 31, 2007 was approximately $181.3 million higher than the prior year due to the increase in operating cash flow generated in 2007.

Capital expenditures for 2007 were $141.4 million compared to $129.1 million during 2006. Capital expenditures during 2007 were used to support our manufacturing operations, systems initiatives and the development and enhancement of new and existing products.

 

In September 2007, we made a $66.8 million investment in Laverda, an operating joint venture that manufactures harvesting equipment, and paid $20.5 million in connection with the SFIL acquisition, both of which are more fully described in “Recent Joint Venture and Acquisition” above. In February 2005, we made a $21.3 million investment in our retail finance joint venture with Rabobank in Brazil, as more fully described in “Related Parties” below.

 

Our debt to capitalization ratio, which is total indebtedness divided by the sum of total indebtedness and stockholders’ equity, was 25.4% at December 31, 2007 compared to 34.5% at December 31, 2006. The decrease is primarily due to lower debt levels during 2007, partially due to the repayment of our United States dollar and Euro denominated term loans under our credit facility as described above.

 

From time to time, we review and will continue to review acquisition and joint venture opportunities, as well as changes in the capital markets. If we were to consummate a significant acquisition or elect to take advantage of favorable opportunities in the capital markets, we may supplement availability or revise the terms under our credit facilities or complete public or private offerings of equity or debt securities.

 

We believe that available borrowings under the revolving credit facility, funding under the accounts receivable securitization facilities, available cash and internally generated funds will be sufficient to support our working capital, capital expenditures and debt service requirements for the foreseeable future.

 

Contractual Obligations

 

The future payments required under our significant contractual obligations, excluding foreign currency forward contracts, as of December 31, 2007 are as follows (in millions):

 

 

 

 

 

 

Off-Balance Sheet Arrangements

 

Guarantees

 

At December 31, 2007, we were obligated under certain circumstances to purchase, through the year 2010, up to $5.0 million of equipment upon expiration of certain operating leases between AGCO Finance LLC and AGCO Finance Canada Ltd., our retail finance joint ventures in North America, and end users. We also maintain a remarketing agreement with these joint ventures whereby we are obligated to repurchase repossessed inventory at market values. We have an agreement with AGCO Finance LLC which limits our purchase obligations under this arrangement to $6.0 million in the aggregate per calendar year. We believe that any losses that might be incurred on the resale of this equipment will not materially impact our financial position or results of operations.

 

From time to time, we sell certain trade receivables under factoring arrangements to financial institutions throughout the world. We evaluate the sale of such receivables pursuant to the guidelines of SFAS No. 140, “Accounting for Transfers and Servicing of Financial Assets and Extinguishments of Liabilities — a Replacement of FASB Statement No. 125,” and have determined that these facilities should be accounted for as off-balance sheet transactions in accordance with SFAS No. 140.

 

At December 31, 2007, we guaranteed indebtedness owed to third parties of approximately $163.4 million, primarily related to dealer and end-user financing of equipment. We believe the credit risk associated with these guarantees is not material to our financial position, as losses under such guarantees have historically been insignificant.

 

Other

 

At December 31, 2007, we had foreign currency forward contracts to buy an aggregate of approximately $531.4 million United States dollar equivalents and foreign currency forward contracts to sell an aggregate of approximately $120.2 million United States dollar equivalents. All contracts have a maturity of less than one year. See “Foreign Currency Risk Management” for additional information.

 

Contingencies

 

As a result of Brazilian tax legislative changes impacting value added taxes (“VAT”), we have recorded a reserve of approximately $21.9 million and $20.0 million against our outstanding balance of Brazilian VAT taxes receivable as of December 31, 2007 and 2006, respectively, due to the uncertainty as to our ability to collect the amounts outstanding.

 

In February 2006, we received a subpoena from the SEC in connection with a non-public, fact-finding inquiry entitled “In the Matter of Certain Participants in the Oil for Food Program.” This subpoena requested documents concerning transactions in Iraq under the United Nations Oil for Food Program by AGCO and certain of our subsidiaries. Subsequently we were contacted by the DOJ regarding the same transactions, although no subpoena or other formal process has been initiated by the DOJ. Similar inquiries have been initiated by the Danish and French governments regarding two of our subsidiaries. The inquiries arose from sales of approximately $58.0 million in farm equipment to the Iraq ministry of agriculture between 2000 and 2002. The SEC’s staff has asserted that certain aspects of those transactions were not properly recorded in our books and records. We are cooperating fully in these inquiries. It is not possible to predict the outcome of these inquiries or their impact, if any, on us, although if the outcomes were adverse we could be required to pay fines and make other payments as well as take appropriate remedial actions.

We are a party to various legal claims and actions incidental to our business. We believe that none of these claims or actions, either individually or in the aggregate, is material to our business or financial condition.

 

Related Parties

 

Rabobank, a AAA rated financial institution based in the Netherlands, is a 51% owner in our retail finance joint ventures which are located in the United States, Canada, Brazil, Germany, France, the United Kingdom, Australia, Ireland and Austria. Rabobank is also the principal agent and participant in our revolving credit facility and our securitization facilities. The majority of the assets of our retail finance joint ventures represent finance receivables. The majority of the liabilities represent notes payable and accrued interest. Under the various joint venture agreements, Rabobank or its affiliates are obligated to provide financing to the joint venture companies, primarily through lines of credit. We do not guarantee the debt obligations of the retail finance joint ventures other than a portion of the retail portfolio in Brazil that is held outside the joint venture by Rabobank Brazil. Prior to 2005, our joint venture in Brazil had an agency relationship with Rabobank whereby Rabobank provided the funding. In February 2005, we made a $21.3 million investment in our retail finance joint venture with Rabobank Brazil. With the additional investment, the joint venture’s organizational structure is now more comparable to our other retail finance joint ventures and will result in the gradual elimination of our solvency guarantee to Rabobank for the portfolio that was originally funded by Rabobank Brazil. As of December 31, 2007, the solvency requirement for the portfolio held by Rabobank was approximately $7.5 million.

 

Our retail finance joint ventures provide retail financing and wholesale financing to our dealers. The terms of the financing arrangements offered to our dealers are similar to arrangements they provide to unaffiliated third parties. As discussed previously, at December 31, 2007 we were obligated under certain circumstances to purchase through the year 2010 up to $5.0 million of equipment upon expiration of certain operating leases between AGCO Finance LLC and AGCO Finance Canada Ltd, our retail joint ventures in North America, and end users. We also maintain a remarketing agreement with these joint ventures, as discussed above under “Off-Balance Sheet Arrangements.” In addition, as part of sales incentives provided to end users, we may from time to time subsidize interest rates of retail financing provided by our retail joint ventures. The cost of those programs is recognized at the time of sale to our dealers. In addition, as discussed above, in May 2005, we completed an agreement to permit transferring, on an ongoing basis, the majority of our wholesale interest-bearing receivables in North America to AGCO Finance LLC and AGCO Finance Canada, Ltd. We have a 49% ownership interest in these joint ventures. The transfer of the wholesale interest-bearing receivables is without recourse to AGCO and we continue to service the receivables. As of December 31, 2007 and 2006, the balance of interest-bearing receivables transferred to AGCO Finance LLC and AGCO Finance Canada, Ltd. under this agreement was approximately $73.3 million and $124.1 million, respectively.

 

During 2007, 2006 and 2005, we had net sales of approximately $275.4 million, $190.9 million and $153.8 million, respectively, to BayWa Corporation, a German distributor, in the ordinary course of business. The President and CEO of BayWa Corporation is a member of our Board of Directors.

 

During 2007 and 2006, we paid license fees and purchased raw materials, including engines, totaling approximately $191.9 million and $211.3 million, respectively, from Caterpillar Inc., in the ordinary course of business. One of the members of our Board of Directors was a Group President of Caterpillar Inc. until his retirement from that position in February 2008.

 

Outlook

 

Our operations are subject to the cyclical nature of the agricultural industry. Sales of our equipment have been and are expected to continue to be affected by changes in net cash farm income, farm land values, weather conditions, the demand for agricultural commodities, farm industry related legislation and general economic conditions.

Worldwide industry retail sales of farm equipment in 2008 are expected to increase modestly from strong 2007 levels. In North America, 2008 farm income is projected to be higher, driving increased demand in industry retail sales compared to 2007. In South America, strong demand in Brazil and Argentina is expected to produce increased industry retail sales. In Europe, industry retail demand is expected to be relatively flat with market expansion in Eastern Europe expected to continue.

 

Our net sales for 2008 are expected to increase compared to 2007 due to pricing, strengthening markets, market share improvement and the impact of currency translation. In 2008, projected operating margin improvement resulting from higher sales volumes and cost reduction efforts is expected to be limited by our strategic investments in the form of increased engineering expenses, a European information system initiative and new market development and distribution improvements.

 

Foreign Currency Risk Management

 

We have significant manufacturing operations in France, Germany, Brazil, and Finland, and we purchase a portion of our tractors, combines and components from third-party foreign suppliers, primarily in various European countries and in Japan. We also sell products in over 140 countries throughout the world. The majority of our net sales outside the United States are denominated in the currency of the customer location, with the exception of sales in the Middle East, Africa, Asia and parts of South America where net sales are primarily denominated in British pounds, Euros or United States dollars. See Note 14 to our Consolidated Financial Statements for net sales by customer location. Our most significant transactional foreign currency exposures are the Euro, Brazilian Real and the Canadian dollar in relation to the United States dollar. Fluctuations in the value of foreign currencies create exposures, which can adversely affect our results of operations.

 

We attempt to manage our transactional foreign exchange exposure by economically hedging foreign currency cash flow forecasts and commitments arising from the settlement of receivables and payables and from future purchases and sales. Where naturally offsetting currency positions do not occur, we hedge certain, but not all, of our exposures through the use of foreign currency forward or option contracts. Our hedging policy prohibits entering into such contracts for speculative trading purposes. Our translation exposure resulting from translating the financial statements of foreign subsidiaries into United States dollars is not hedged. Our most significant translation exposures are the Euro, the British pound and the Brazilian Real in relation to the United States dollar. When practical, this translation impact is reduced by financing local operations with local borrowings.

 

All derivatives are recognized on our Consolidated Balance Sheets at fair value. On the date a derivative contract is entered into, we designate the derivative as either (1) a fair value hedge of a recognized liability, (2) a cash flow hedge of a forecasted transaction, (3) a hedge of a net investment in a foreign operation, or (4) a non-designated derivative instrument. As discussed above, we use foreign currency forward contracts to economically hedge receivables and payables on our Consolidated Balance Sheet and our subsidiaries’ balance sheets that are denominated in foreign currencies other than the functional currency. These forward contracts are classified as non-designated derivative instruments. Gains and losses on such contracts are historically substantially offset by losses and gains on the remeasurement of the underlying asset or liability being hedged. Changes in fair value of non-designated derivative contracts are reported in current earnings. During 2007 and 2006, we designated certain foreign currency option contracts as cash flow hedges of expected future sales. The effective portion of the fair value gains or losses on these cash flow hedges were recorded in other comprehensive income and subsequently reclassified into cost of goods sold during the same period as the sales were recognized. These amounts offset the effect of the changes in foreign exchange rates on the related sale transactions. The amount of the gain recorded in other comprehensive income (loss) that was reclassified to cost of goods sold during the years ended December 31, 2007 and 2006 was approximately $4.1 million and $4.0 million, respectively, on an after-tax basis. The amount of the gain recorded to other comprehensive income (loss) related to the outstanding cash flow hedges as of December 31, 2007 and 2006 was approximately $7.7 million and $0.1 million, respectively, on an after-tax basis. The outstanding contracts as of December 31, 2007 range in maturity through December 2008.

The following is a summary of foreign currency derivative contracts used to hedge currency exposures. All contracts have a maturity of less than one year. The net notional amounts and fair value gains or losses as of December 31, 2007 stated in United States dollars are as follows (in millions, except average contract rate):

 

 

 

 

Because these contracts were entered into for hedging purposes, the gains and losses on the contracts would largely be offset by gains and losses on the underlying firm commitment or forecasted transaction.

 

Interest Rates

 

We manage interest rate risk through the use of fixed rate debt and may in the future utilize interest rate swap contracts. We have fixed rate debt from our senior subordinated notes and our convertible senior subordinated notes. Our floating rate exposure is related to our revolving credit facility and our securitization facilities, which are tied to changes in United States and European LIBOR rates. Assuming a 10.0% increase in interest rates, interest expense, net and the cost of our securitization facilities for the year ended December 31, 2007 would have increased by approximately $3.0 million.

 

We had no interest rate swap contracts outstanding during the years ended December 31, 2007, 2006 and 2005.

 

Accounting Changes

 

In December 2007, the FASB issued SFAS No. 141 (Revised 2007), “Business Combinations” (“SFAS No. 141R”), and SFAS No. 160, “Noncontrolling Interests in Consolidated Financial Statements” (“SFAS No. 160”). SFAS No. 141R requires an acquirer to measure the identifiable assets acquired, the liabilities assumed and any noncontrolling interest in the acquiree at their fair values on the acquisition date, with goodwill being the excess value over the net identifiable assets acquired. SFAS No. 141R also requires the fair value measurement of certain other assets and liabilities related to the acquisition such as contingencies and research and development. SFAS No. 160 clarifies that a noncontrolling interest in a subsidiary should be reported as equity in a company’s consolidated financial statements. Consolidated net income should include the net income for both the parent and the noncontrolling interest with disclosure of both amounts in a company’s consolidated statement of operations. The calculation of earnings per share will continue to be based on income amounts attributable to the parent. We are required to adopt SFAS No. 141R and SFAS 160

on January 1, 2009 and are currently evaluating the impact, if any, of SFAS No. 141R and SFAS No. 160 on our Consolidated Financial Statements.

 

In March 2007, the Emerging Issues Task Force (“EITF”) reached a consensus on EITF Issue No. 06-10, “Accounting for Collateral Assignment Split-Dollar Life Insurance Arrangements” (“EITF 06-10”), which requires that an employer recognize a liability for the postretirement benefit related to a collateral assignment split-dollar life insurance arrangement in accordance with either SFAS No. 106, “Employers’ Accounting for Postretirement Benefits Other Than Pensions” (“SFAS No. 106”) (if, in substance, a postretirement benefit plan exists), or APB Opinion No. 12 (if the arrangement is, in substance, an individual deferred compensation contract) if the employer has agreed to maintain a life insurance policy during the employee’s retirement or provide the employee with a death benefit based on the substantive agreement with the employee. In addition, the EITF reached a consensus that an employer should recognize and measure an asset based on the nature and substance of the collateral assignment split-dollar life insurance arrangement. The EITF observed that in determining the nature and substance of the arrangement, the employer should assess what future cash flows the employer is entitled to, if any, as well as the employee’s obligation and ability to repay the employer. EITF 06-10 is effective for fiscal years beginning after December 15, 2007. We have certain insurance policies subject to the provisions of this new pronouncement, but do not believe the adoption of EITF 06-10 will have a material impact on our consolidated results of operations or financial position.

 

In February 2007, the FASB issued SFAS No. 159, “The Fair Value Option for Financial Assets and Financial Liabilities” (“SFAS No. 159”). SFAS No. 159 provides companies with an option to report selected financial assets and liabilities at fair value and to provide additional information that will help investors and other users of financial statements to understand more easily the effect on earnings of a company’s choice to use fair value. It also requires companies to display the fair value of those assets and liabilities for which a company has chosen to use fair value on the face of the balance sheet. We are required to adopt SFAS No. 159 on January 1, 2008 and do not believe the adoption of SFAS 159 will have a material impact on our Consolidated Financial Statements.

 

In September 2006, the FASB issued SFAS No. 157, “Fair Value Measurements” (“SFAS No. 157”). SFAS No. 157 establishes a common definition for fair value to be applied to guidance regarding U.S. generally accepted accounting principles requiring use of fair value, establishes a framework for measuring fair value, and expands disclosure about such fair value measurements. SFAS No. 157 is effective for fair value measures already required or permitted by other standards for fiscal years beginning after November 15, 2007. In November 2007, the FASB proposed a one-year deferral of SFAS No. 157’s fair value measurement requirements for nonfinancial assets and liabilities that are not required or permitted to be measured at fair value on a recurring basis. We are currently assessing the impact of SFAS No. 157 on our consolidated financial position and results of operations during 2008, but do not believe the adoption of SFAS 157 will have a material impact on our consolidated results of operations or financial position.

 

In September 2006, the FASB issued FASB Staff Position AUG AIR-1 “Accounting for Planned Major Maintenance Activities” (“FSP AUG AIR-1”). FSP AUG AIR-1 amends the guidance on the accounting for planned major maintenance activities; specifically it precludes the use of the previously acceptable “accrue in advance” method. FSP AUG AIR-1 is effective for fiscal years beginning after December 15, 2006. The implementation of this standard did not have a material impact on our consolidated financial position or results of operations, as we do not employ the “accrue in advance” method.

 

In June 2006, the EITF reached a consensus on EITF Issue No. 06-4, “Accounting for Deferred Compensation and Postretirement Benefit Aspects of Endorsement Split-Dollar Life Insurance Arrangements” (“EITF 06-4”), which requires the application of the provisions of SFAS No. 106 to endorsement split-dollar life insurance arrangements. SFAS No. 106 would require us to recognize a liability for the discounted future benefit obligation that we will have to pay upon the death of the underlying insured employee. An endorsement-type arrangement generally exists when a company owns and controls all incidents of ownership of the underlying policies. EITF 06-4 is effective for fiscal years beginning after December 15, 2007. We have certain insurance policies subject to the provisions of this new pronouncement, but do not believe the adoption of EITF 06-4 will have a material impact on our consolidated results of operations or financial position.

In June 2006, the FASB issued FIN 48. FIN 48 clarifies the accounting for uncertainty in income taxes by prescribing a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. The interpretation also provides guidance on derecognition, classification, interest and penalties, accounting in interim periods, and disclosure. We adopted FIN 48 effective January 1, 2007. The adoption of FIN 48 did not have a material effect on our consolidated results of operations or financial position. See Note 6 of our Consolidated Financial Statements where the adoption of FIN 48 is discussed.

 

In March 2006, the FASB issued SFAS No. 156, “Accounting for Servicing of Financial Assets — an amendment of FASB Statement No. 140” (“SFAS No. 156”). SFAS No. 156 requires an entity to recognize a servicing asset or liability each time it undertakes an obligation to service a financial asset by entering into a servicing contract in specified situations. Such servicing assets or liabilities would be initially measured at fair value, if practicable, and subsequently measured at amortized value or fair value based upon an election of the reporting entity. SFAS No. 156 also specifies certain financial statement presentations and disclosures in connection with servicing assets and liabilities. SFAS No. 156 is effective for fiscal years beginning after September 15, 2006. The adoption of SFAS No. 156 did not have a material effect our consolidated financial position.

 

In March 2006, the EITF reached a consensus on EITF Issue No. 06-3, “How Taxes Collected from Customers and Remitted to Governmental Authorities Should Be Presented in the Income Statement (that is, Gross versus Net Presentation)” (“EITF 06-3”), which allows companies to adopt a policy of presenting taxes in the income statement on either a gross or net basis. Taxes within the scope of EITF 06-3 would include taxes that are imposed on a revenue transaction between a seller and a customer, such as sales taxes, use taxes, value-added taxes, and some types of excise taxes. EITF 06-3 is effective for interim and annual reporting periods beginning after December 15, 2006. Our adoption of EITF 06-3 did not impact the method for recording and reporting these taxes in our consolidated results of operations or financial position, as our policy is to exclude all such taxes from net sales and present such taxes in our Consolidated Statements of Operations on a net basis.

 

 

The Quantitative and Qualitative Disclosures about Market Risk information required by this Item set forth under the captions “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Foreign Currency Risk Management” and “— Interest Rates” on pages 47 and 48 under Item 7 of this Form 10-K are incorporated herein by reference.

 

 

The following Consolidated Financial Statements of AGCO and its subsidiaries for each of the years in the three-year period ended December 31, 2007 are included in this Item:

 

 

The information under the heading “Quarterly Results” of Item 7 on pages 29 and 30 of this Form 10-K is incorporated herein by reference.

Report of Independent Registered Public Accounting Firm

 

The Board of Directors and Stockholders

AGCO Corporation:

 

We have audited the accompanying consolidated balance sheets of AGCO Corporation and subsidiaries as of December 31, 2007 and 2006, and the related consolidated statements of operations, stockholders’ equity, and cash flows for each of the years in the three-year period ended December 31, 2007. In connection with our audits of the consolidated financial statements, we also have audited the financial statement schedule listed in Item 15(a)(2). These consolidated financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule based on our audits.

 

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of AGCO Corporation and subsidiaries as of December 31, 2007 and 2006, and the results of their operations and their cash flows for each of the years in the three-year period ended December 31, 2007, in conformity with U.S. generally accepted accounting principles. Also in our opinion, the related financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

 

As discussed in Notes 1, 8, and 10, the Company changed its methods of accounting for share-based payment and defined benefit pension and other postretirement plans and its method of quantifying errors in 2006.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), AGCO Corporation’s internal control over financial reporting as of December 31, 2007, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated February 28, 2008 expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.

 

/s/ KPMG LLP

 

Atlanta, Georgia

February 28, 2008

AGCO CORPORATION

 

CONSOLIDATED STATEMENTS OF OPERATIONS

(In millions, except per share data)

 

 

See accompanying notes to Consolidated Financial Statements.

AGCO CORPORATION

 

CONSOLIDATED BALANCE SHEETS

(In millions, except share amounts)

 

 

See accompanying notes to Consolidated Financial Statements.

AGCO CORPORATION

 

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

(In millions, except share amounts)