`
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

Form 10-K

ý ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2014

OR

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from _________________ to _______________________

Commission file number 001-11595

ASTEC INDUSTRIES, INC.
(Exact name of registrant as specified in its charter)

Tennessee
62-0873631
(State or other jurisdiction of incorporation or organization)
(I.R.S. Employer Identification No.)
   
 1725 Shepherd Road, Chattanooga, Tennessee
37421
(Address of principal executive offices)
(Zip Code)


Registrant's telephone number, including area code:
(423)  899-5898


Securities registered pursuant to Section 12(b) of the Act:
(Title of each class)
(Name of each exchange on which registered)
Common Stock, $0.20 par value
NASDAQ National Market

Securities registered pursuant to Section 12(g) of the Act:
None
(Title of class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
                                 Yes 
 No  ý

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act.
                                 Yes 
 No  ý

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Yes  ý
No 



Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

                                 Yes   ý
No 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of the registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act. (Check one):

Large Accelerated Filer ý
Accelerated Filer 
 
Non-accelerated Filer  (Do not check if a smaller reporting company)
Smaller Reporting Company 


 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).
Yes
No ý
 


As of June 30, 2014, the aggregate market value of the registrant's voting and non-voting common stock held by non-affiliates of the registrant was approximately $898,860,000 based upon the closing sales price as reported on the NASDAQ National Market System.


(APPLICABLE ONLY TO CORPORATE REGISTRANTS)

Indicate the number of shares outstanding of each of the registrant's classes of common stock, as of the latest practicable date:


As of February 17, 2015, Common Stock, par value $0.20 - 22,935,192 shares


DOCUMENTS INCORPORATED BY REFERENCE

Portions of the following documents have been incorporated by reference into the Parts of this Annual Report on Form 10-K indicated:


Document
Form 10-K
Proxy Statement relating to Annual Meeting of Shareholders to be held on April 23, 2015
Part III
   




ASTEC INDUSTRIES, INC.
2014 FORM 10-K ANNUAL REPORT
TABLE OF CONTENTS


PART I
   
Page
 
Item 1.
Business
   
2
 
Item 1A.
Risk Factors
   
18
 
Item 1B.
Unresolved Staff Comments
   
24
 
Item 2.
Properties
   
24
 
Item 3.
Legal Proceedings
   
27
 
Item 4.
Mine Safety Disclosures
   
27
 
  Executive Officers     27  
           
PART II
         
Item 5.
Market for Registrant's Common Equity; Related Shareholder Matters and
  Issuer Purchases of Equity Securities
   
30
 
Item 6.
Selected Financial Data
   
31
 
Item 7.
Management's Discussion and Analysis of Financial Condition and Results
  of Operations
   
31
 
Item 7A.
Quantitative and Qualitative Disclosures About Market Risk
   
31
 
Item 8.
Financial Statements and Supplementary Data
   
31
 
Item 9
Changes in and Disagreements with Accountants on Accounting and
  Financial Disclosure
   
31
 
Item 9A.
Controls and Procedures
   
31
 
Item 9B.
Other Information
   
31
 
           
PART III
         
Item 10.
Directors, Executive Officers and Corporate Governance
   
32
 
Item 11.
Executive Compensation
   
32
 
Item 12.
Security Ownership of Certain Beneficial Owners and Management and
  Related Shareholder Matters
   
32
 
Item 13.
Certain Relationships and Related Transactions, and Director Independence
   
33
 
Item 14.
Principal Accounting Fees and Services
   
33
 
           
PART IV
         
Item 15.
Exhibits and Financial Statement Schedules
   
34
 
           
           
Appendix A
ITEMS 6, 7, 7A, 8, 9A and 15(a)(1), (2) and (3),and 15(b) and 15(c)
   
A-1
 
           
Signatures
         




FORWARD-LOOKING STATEMENTS
This Annual Report on Form 10-K contains forward-looking statements made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995.  Statements contained anywhere in this Annual Report on Form 10-K that are not limited to historical information are considered forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934, including, without limitation, statements regarding:

·
execution of the Company's growth and operation strategy;
·
plans for technological innovation;
·
compliance with covenants in our credit facility;
·
liquidity and capital expenditures;
·
sufficiency of working capital, cash flows and available capacity under the Company's credit facilities;
·
compliance with government regulations;
·
compliance with manufacturing and delivery timetables;
·
forecasting of results;
·
general economic trends and political uncertainty;
·
government funding and growth of highway construction and commercial projects;
·
taxes or usage fees;
·
interest rates;
·
integration of acquisitions;
·
industry trends;
·
pricing, demand and availability of steel, oil and liquid asphalt;
·
development of domestic oil and natural gas production;
·
condition of the economy;
·
strength of the dollar relative to foreign currencies;
·
the success of new product lines;
·
presence in the international marketplace;
·
suitability of our current facilities;
·
future payment of dividends;
·
competition in our business segments;
·
product liability and other claims;
·
protection of proprietary technology;
·
demand for products;
·
future filling of backlogs;
·
employees;
·
the seasonality of our business;
·
tax assets and reserves for uncertain tax positions;
·
critical accounting policies and the impact of accounting changes;
·
anticipated future operations in our Brazilian facility;
·
our backlog;
·
ability to satisfy contingencies;
·
contributions to retirement plans and plan expenses;
·
reserve levels for self-insured insurance plans and product warranties;
·
construction of new manufacturing facilities;
·
supply of raw materials; and
·
inventory.

1


These forward-looking statements are based largely on management's expectations, which are subject to a number of known and unknown risks, uncertainties and other factors discussed in this report and in other documents filed by us with the Securities and Exchange Commission, which may cause actual results, financial or otherwise, to be materially different from those anticipated, expressed or implied by the forward-looking statements.  All forward-looking statements included in this document are based on information available to us on the date hereof, and we assume no obligation to update any such forward-looking statements to reflect future events or circumstances.  You can identify these statements by forward-looking words such as "expect", "believe", "anticipate", "goal", "plan", "intend", "estimate", "may", "will", "should" and similar expressions.

In addition to the risks and uncertainties identified elsewhere herein and in other documents filed by us with the Securities and Exchange Commission, the risk factors described in this document under the caption "Risk Factors" should be carefully considered when evaluating our business and future prospects.

PART I

Item 1Business

All dollar amounts included in this section are in thousands.
General

Astec Industries, Inc. (the "Company") is a Tennessee corporation which was incorporated in 1972.  The Company designs, engineers, manufactures and markets equipment and components used primarily in road building and related construction activities as well as other products discussed below.  The Company's products are used in each phase of road building, from quarrying and crushing the aggregate to application of the road surface. The Company also manufactures certain equipment and components unrelated to road construction, including equipment for the mining, quarrying, construction and demolition industries and port and rail yard operators; gas and oil drilling rigs; water well and geothermal drilling rigs; industrial heat transfer equipment; whole-tree pulpwood chippers; horizontal grinders; and blower trucks.  The Company also manufactures a line of multiple use plants for cement treated base, roller compacted concrete and ready-mix concrete.  The Company recently developed and began marketing pelletizing equipment used to compress wood and other products into dense pellets for the renewable energy market among other applications.  The Company's subsidiaries hold 77 United States and 37 foreign patents and have an additional 43 United States and 74 foreign patent applications pending. The Company has been responsible for many technological and engineering innovations in the industries in which it operates.  The Company's products are marketed both domestically and internationally.  In addition to equipment sales, the Company manufactures and sells replacement parts for equipment in each of its product lines and replacement parts for some competitors' equipment.  The distribution and sale of replacement parts is an integral part of the Company's business.
2

 
The Company's sixteen manufacturing subsidiaries are:
(i)
Astec, Inc. (including its Dillman division), which designs, engineers, manufactures and markets asphalt plants, wood pellet plants
  and related componentsof each;
(ii)
Roadtec, Inc., which designs, engineers, manufactures and markets highway and commercial classes of asphalt pavers, material
  transfer vehicles, milling machines and a line of soil stabilizing-reclaiming machinery;
(iii)
Carlson Paving Products, Inc., which designs, engineers, manufactures and markets asphalt paver screeds, a commercial paver and a
  windrow pickup machine;
(iv)
Telsmith, Inc., which designs, engineers, manufactures and markets aggregate processing and mining equipment for the production
  and classification of sand, gravel, crushed stone and minerals used in road construction and other applications;
(v)
Kolberg-Pioneer, Inc., which designs, engineers, manufactures and markets aggregate processing equipment for the crushed stone,
  gravel, manufactured sand, recycle, top soil and remediation markets;
(vi)
Johnson Crushers International, Inc., which designs, engineers, manufactures and markets portable and stationary aggregate and ore
  processing equipment for the crushed stone, gravel, manufactured sand, recycle, top soil and remediation markets;
(vii)
Astec Mobile Screens, Inc. which designs, engineers, manufactures and markets mobile screening plants, portable and stationary
  structures and vibrating screens for the aggregate, recycle and material processing industries;
(viii)
Breaker Technology Ltd/Inc., which designs, engineers, manufactures and markets rock breaking systems in addition to processing
  equipment and utility vehicles for the mining and quarrying industries;
(ix)
Osborn Engineered Products SA (Pty) Ltd, which designs, engineers, manufactures and markets a complete line of bulk material
  handling and minerals processing plant and equipment used in the aggregate, mineral mining, metallic mining and recycling
  industries and also markets equipment produced by other Astec companies;
(x)
Astec do Brasil Fabricacao de Equipamentos Ltda. which will initially manufacture and sell rock crushers, feeders and screens
  representing the brands of several other Astec companies in the South American construction and mining industries;
(xi)
 Telestack Limited, acquired in April 2014 and located in Northern Ireland, which designs, manufactures and installs a complete
  line of material handling systems to serve the port handling, bulk material handling and aggregate markets;
(xii)
Heatec, Inc., which designs, engineers, manufactures and markets thermal fluid heaters, process heaters, waste heat recovery
  equipment, liquid storage systems and polymer and rubber blending systems;
(xiii)
CEI Enterprises, Inc., which designs, engineers, manufactures and markets thermal fluid heaters, storage tanks, concrete plants
  and  rubberized asphalt and polymer blending systems;
(xiv)
GEFCO, Inc., which designs, engineers, manufactures and markets portable drilling rigs and related equipment for the water well,
  environmental, groundwater monitoring, construction, geothermal, mining and shallow oil and gas exploration and production
  industries;
(xv)
Astec Underground, Inc., which designs, engineers, manufactures and markets high pressure diesel powered pump trailers used for
  fracking and cleaning oil and gas wells and drilling rigs for the oil and gas industries as well as functioning as a contract
  manufacturer for other Astec companies; and
(xvi)
 Peterson Pacific Corp., which designs, engineers, manufactures and markets whole-tree pulpwood chippers, horizontal grinders and
  blower trucks.
 
 
3


The Company also has subsidiaries in Australia, Astec Australia Pty Ltd, and Germany, Astec Mobile Machinery, GmbH, that market, service and install equipment and provide parts in the region in which they operate for many of the products produced by the Company's manufacturing subsidiaries.

The Company's strategy is to be the industry's most cost-efficient producer in each of its product lines while continuing to develop innovative new products and provide first class service for its customers.  Management believes that the Company is the technological innovator in the markets in which it operates and is well positioned to capitalize on the need to rebuild and enhance roadway and utility infrastructure as well as in other areas in which it offers products and services, both in the United States and abroad.

Segment Reporting

The Company's business units have their own management teams and offer different products and services.  Due to the recent change in the Company's chief operating decision maker, the sale of a Company subsidiary and other Company product lines and the transfer of responsibility for certain product lines between Company subsidiaries, the composition of the Company's reportable segments was changed as of January 1, 2014. The business units are now aggregated into three reportable business segments based upon the nature of the product or services produced, the type of customer for the products, the similarity of economic characteristics, the manner in which management reviews results and the nature of the production process, among other considerations.  The Company's current reportable business segments are (i) Infrastructure Group, (ii) Aggregate and Mining Group and (iii) Energy Group.  The remaining business units not included in one of the reportable segments provide support and corporate oversight for all the Company's business units and include Astec Industries, Inc., the parent company, and Astec Insurance Company, a captive insurance company.  We refer to these two companies as the "Corporate" category throughout this document.  The Company records U.S. federal income tax expenses for all business segments on the parent company's books; therefore these taxes are included in the Corporate category for segment reporting.

Financial information in connection with the Company's financial reporting for segments of a business and for geographic areas under FASB Accounting Standards Codification (ASC) 280 is included in Note 17, Operations by Industry Segment and Geographic Area, in "Notes to Consolidated Financial Statements" presented in Appendix A of this report.

Infrastructure Group

The Infrastructure Group segment is made up of five business units.  These business units include Astec, Inc. ("Astec"), Roadtec, Inc. ("Roadtec"), Carlson Paving Products, Inc. ("Carlson"), Astec Mobile Machinery GmbH ("AMM") and Astec Australia Pty Ltd ("Astec Australia").  Three of the business units (Astec, Roadtec and Carlson) design, engineer, manufacture and market a complete line of asphalt and wood pellet plants and their related components, and asphalt pavers and related ancillary equipment.  The other two business units (AMM and Astec Australia) primarily sell, service and install products produced by the manufacturing subsidiaries of the Company with a majority of their sales to customers in the infrastructure industry.
4


Products

Astec designs, engineers, manufactures and markets a complete line of asphalt and wood pellet plants and related components for the asphalt paving and other industries.  Certain component equipment supplied by Astec for complete asphalt and wood pellet plants is manufactured by other Company subsidiaries such as heating and storage equipment (manufactured by the Company's Energy Group) and material handling equipment (manufactured by the Company's Aggregate and Mining Group).  A typical asphalt mixing plant consists of heating and storage equipment for liquid asphalt; cold feed bins for blending aggregates; a counter-flow continuous type unit (Astec Double Barrel) for drying, heating and mixing; a baghouse composed of air filters and other pollution control devices; hot storage bins or silos for temporary storage of hot-mix asphalt; and a control house. Astec introduced the concept of high plant portability in 1979. Its current generation of portable asphalt plants is marketed as the Six Pack and consists of six or more portable components designed to be easily relocated from one construction site to another, thereby reducing relocation expenses. High plant portability represents an industry innovation developed and successfully marketed by Astec. Astec's enhanced version of the Six Pack, known as the Turbo Six Pack, is a highly portable plant which is especially useful in less populated areas where plants must be moved from job-to-job and can be disassembled and erected without the use of cranes.

Astec developed the patented Double Barrel Green System, which allows the asphalt mix to be prepared and placed at lower temperatures than conventional systems and operates with a substantial reduction in smoke emissions during paving and load-out. Previous technologies for warm mix production rely on expensive additives, procedures and/or special asphalt cement delivery systems that significantly increase the cost per ton of mix. The Company's new Astec multi-nozzle device eliminates the need for the expensive additives by mixing a small amount of water and asphalt cement together to create microscopic bubbles that reduces the viscosity of the asphalt mix coating on the rock, thereby allowing the mix to be handled and worked at lower temperatures.

The components in Astec's asphalt mixing plants are fully automated and use both microprocessor-based and programmable logic control systems for efficient operation. The plants are manufactured to meet or exceed federal and state clean air standards. Astec also builds batch type asphalt plants and has developed specialized asphalt recycling equipment for use with its hot-mix asphalt plants.

Astec's wood pellet plants have been in commercial production since 2013. Astec's modular design for its wood pellet plants includes replicated parallel production lines (for instance, a 60 ton-per-hour ("TPH") plant consists of three 20 TPH lines) resulting in very few points in the process where any individual equipment failure can shut the entire plant down.  In most other pellet plant designs, one small equipment failure, such as a dryer outage would mean a total plant shutdown. In a 60 TPH Astec plant, a dryer outage means the plant continues to operate at 40 TPH. In fact, there are very few reasons why the plant would ever be completely shut down. Even major maintenance cycles may be performed line-by-line while the plant continues to operate on the other lines.

Roadtec manufactures asphalt pavers, material transfer vehicles, milling machines, soil stabilizing-reclaiming machinery and other equipment used in road building and resurfacing.  Roadtec pavers have been designed to minimize maintenance costs while exceeding road surface smoothness requirements.  The equipment offered by Roadtec can be used in tandem with each other or separately with equipment already owned by the customer.
5


Roadtec's Shuttle Buggy is a mobile, self-propelled material transfer vehicle which allows continuous paving by separating truck unloading from the paving process while remixing the asphalt.  A typical asphalt paver must stop paving to permit truck unloading of asphalt mix.  By permitting continuous paving, the Shuttle Buggy allows the asphalt paver to produce a smoother road surface, while reducing the time required to pave the road surface and reducing the number of haul trucks required.  As a result of the pavement smoothness achieved with this machine, certain states now require the use of the Shuttle Buggy.  Studies using infrared technology have revealed problems caused by differential cooling of the hot-mix during hauling.  The Shuttle Buggy remixes the material to a uniform temperature and gradation, thus eliminating these problems.  Roadtec's paver models recommended for use with the Shuttle Buggy are also designed to carry and spray tack coat directly in front of the hot mix asphalt in a single process.

Roadtec manufactures milling machines designed to remove old asphalt from the road surface before new asphalt mix is applied.  Roadtec's milling machine lines, which are designed for larger jobs, are manufactured with a simplified control system, wide conveyors, direct drives and a wide range of horsepower and cutting capabilities to provide versatility in product application.  In addition to its half-lane and larger highway class milling machines, Roadtec also manufactures a smaller, utility class machine for two to four foot cutting widths and a utility class cold planer model mounted on wheels.

Roadtec currently produces soil stabilizers in configurations of 275 HP, 440HP, 625HP and 755HP.  These machines double as asphalt reclaiming machines for road rehabilitations, in addition to their primary purpose of stabilizing soil sub-grades with additives to provide an improved base on which to pave.

 Roadtec recently introduced several new products including a new international class 2.5M track paver designed to carry a tamper bar screed, a new international compatible track mounted material transfer vehicle and a new sweeper with an integral conveyor.

Carlson manufactures its patented screeds which attach to asphalt paving machines and place asphalt on the roadbed at a desired thickness and width while smoothing and compacting the surface.  Carlson screeds can be configured to fit many types of asphalt paving machines, including machines manufactured by both the Company and its competitors. Carlson also manufactures windrow pickup machines which transfer hot mix asphalt from the road bed into the paver's hopper. The Carlson screed uses a hydraulic powered generator to electrify elements that heat a screed plate so asphalt will not stick to it while paving.  A generator is also available to power tools or lights for night paving.  Carlson offers options to its screeds which allow extended paving widths and the addition of a curb on the road edge.  Carlson also offers a commercial class eight foot paver designed for parking lots, residential and secondary road applications to fill the void between competitors' commercial pavers and Roadtec's highway class paver line.

Astec Mobile Machinery functions primarily as a distributor of Roadtec products in the European market.  Additionally, it designs and manufactures screeds and a small road widener attachment designed to meet the unique needs of the European market.

Astec Australia markets relocatable and portable asphalt plants and components produced by Astec, Heatec and CEI, asphalt paving equipment and components produced by Roadtec and Carlson, and aggregate equipment produced by the Company's Aggregate & Mining Group with a majority of their sales being to customers in the infrastructure industry.  In addition to selling equipment, Astec Australia provides complete support for their customers' equipment with service, training and spare parts.  Astec Australia also provides turnkey installation solutions for large asphalt plants, aggregate and mining plants and bitumen tank farms.
6


Marketing

The Company markets its hot-mix asphalt products domestically under the Astec and Astec Dillman trademarks and internationally under the Astec trademarks.  Asphalt plants and related equipment are sold directly to asphalt producers or domestic and foreign government agencies through Astec's domestic and international sales departments and through a Company owned dealership (Astec Australia), although independent agents are also used to market asphalt plants and their components in certain international markets.  The Company markets wood pellet plants to individual plant operators supplying wood pellets to the utility and home-use industries.

The Company markets its asphalt paving equipment both domestically and internationally to highway and heavy equipment contractors, utility contractors and foreign and domestic governmental agencies both directly and through dealers (including AMM in the European market).  Mobile construction equipment and factory authorized machine rebuild services are marketed both directly and through dealers.

This segment employs 88 direct sales staff, 73 domestic independent distributors and 90 international independent distributors, including Astec-owned distributors in Australia and Germany.

Raw Materials

Raw materials used in the manufacture of products in the Infrastructure Group include carbon steel, pipe and various types of alloy steel, which are normally purchased from distributors and other sources.  Raw materials for manufacturing are normally readily available.  Most steel is delivered on a "just-in-time" arrangement from the supplier to reduce inventory requirements at the manufacturing facilities, but steel is occasionally inventoried after purchase.  Other components used in the manufacturing processes include engines, gearboxes, power transmissions and electronic systems.

Competition

This industry segment faces strong competition in price, service and product performance and competes with both large publicly-held companies and various smaller manufacturers. Domestic hot-mix asphalt plant competitors include Gencor Industries, Inc., ADM and Almix.  In the international market, the hot-mix asphalt plant competitors include Ammann, Fayat/Marini, Speco and local manufacturers.  Paving equipment and screed competitors include Wailer, Caterpillar Paving Products, Inc., Volvo Construction Equipment, Vogele America, a subsidiary of Wirtgen America, Dynapac, a subsidiary of Atlas-Copco, Bomag Fayat Group and Lee Boy.  The segment's milling machine equipment competitors include Wirtgen, CMI, Caterpillar, Bomag, Dynapac and Volvo.  The Company believes that it is the only company offering a single source for a complete pellet plant as known competitors only sell individual plant components thereby requiring the customer to purchase the remaining plant components from other sources.

Employees

At December 31, 2014, the Infrastructure Group segment employed 1,366 individuals, of which 935 were engaged in manufacturing, 149 in engineering and 282 in selling, general and administrative functions. None of the employees of the Infrastructure Group are covered by collective bargaining agreements.
7


Backlog
 
The backlog for the Infrastructure Group at December 31, 2014 and 2013 was approximately $147,190 and $137,120, respectively. Approximately $59,300 of the 2014 backlog relates to a three line pellet plant order from a single customer and all but approximately $10,500 of this order was manufactured and delivered to the customer prior to December 31, 2014. The backlog at December 31, 2013 included $20,800 for the first line of this order.  As the Company is financing this sale, revenue recognition on the plant sale will not occur until customer payments are received under the related loan arrangements.  Management expects the current backlog to be filled in 2015.
 
Aggregate and Mining Group

The Company's Aggregate and Mining Group is comprised of eight business units focused on supplying heavy equipment and parts in the aggregate, metallic mining, quarrying, recycling, ports and bulk handling markets.  These business units achieve their strength by distributing products into niche markets and drawing on the advantages of brand recognition in the global market.  These business units are Telsmith, Inc. ("Telsmith"), Kolberg-Pioneer, Inc. ("KPI"), Astec Mobile Screens, Inc. ("AMS"), Johnson Crushers International, Inc. ("JCI"), Breaker Technology Ltd/Breaker Technology Inc. ("BTI"), Osborn Engineered Products, SA (Pty) Ltd ("Osborn"), Astec do Brasil Fabricacao de Equipamentos Ltda. ("Astec Brazil") and Telestack Ltd ("Telestack"), which was acquired in April 2014.

Products

Telsmith, founded in 1906, is the oldest subsidiary of the group.  The primary markets served under the TELSMITH trade name are the aggregate, metallic mining and recycling industries.  Telsmith's core products are jaw, cone and impact crushers, as well as vibrating feeders and inclined and horizontal screens. Telsmith also provides consulting and engineering services to provide complete "turnkey" processing systems. Both portable and modular plant systems are available in production ranges from 300tph to 1500tph.

Telsmith maintains an ISO 9001:2008 certification, an internationally recognized standard of quality assurance. In addition, Telsmith has achieved CE designation (a standard for quality assurance and safety) on its jaw crusher, cone crusher and vibrating screen products marketed into European Union countries.

Telsmith recently introduced ten new or enhanced equipment models in several of its product lines to address customer needs by adding additional features and functionality to its existing product line while also addressing manufacturing cost concerns.  Product lines with new or enhanced equipment models include portable cone crushers, horizontal screens and screen plants, fold-up conveyors, rock hoppers, crushing stations, skid mounted crushing plants and vibrating pan feeders.

KPI and JCI ("KPI-JCI") design, engineer, manufacture and support a complete line of stationary and portable aggregate and ore processing equipment for the sand and gravel, mining, quarrying, concrete and asphalt recycling markets under the KPI-JCI product brand name. This equipment, along with the related screen products from AMS, is jointly marketed through an extensive network of KPI-JCI and AMS dealers.
8


KPI-JCI products include a complete line of primary, secondary, tertiary and quaternary crushers, including jaw, cone, horizontal shaft impactor, vertical shaft impactor and roll rock crushers as well as industry related washing and conveying equipment and incline as well as horizontal screens.  These rock crushers are used by mining, quarrying and sand and gravel producers to crush oversized aggregate to salable size, in addition to their use for recycled concrete and asphalt. This equipment can be purchased as individual components, as portable plants for flexibility or as completely engineered systems for both portable and stationary applications. They also offer the highly-portable Fast Pack System, featuring quick setup and teardown, thereby maximizing production time and minimizing downtime. KPI-JCI also offers portable fully self-contained and self-propelled Fast Trax track-mounted jaw and horizontal shaft crushers in six different models, which are ideal for either recycle or hard rock applications, allowing the producer to move the equipment to the material.  KPI-JCI's expanded Global Trax line of track-mounted crushers focuses more specifically on the need for these types of products in the global market. KPI-JCI screens are low-profile machines for use in both portable and stationary applications.

KPI-JCI portable plants combine various combinations of cone crushers, horizontal screens, combo screens and conveyors mounted on tow away chassis and track chassis configurations.  Due to high transportation costs of construction materials, many producers use portable equipment to process materials they need close to their job sites.  Portable plants allow aggregate producers the ability to quickly and efficiently move equipment from one location to another as their jobs necessitate.   The portable track plants are fully self-contained and allow operators to be producing materials within minutes of unloading equipment off of their transport trucks.  The introduction of track-mounted crushing and screening plants has enabled contractors to perform jobs that in the past were not economically feasible and also allows our dealers to compete in the large track-mounted rental market. 

KPI-JCI sand classifying and washing equipment is designed to clean, separate and re-blend material from sand deposits to meet the size specifications for critical applications. KPI-JCI products include fine and coarse material washers, log washers, blade mills, sand classifying tanks, cyclones, dewatering screens, density classifiers, sieve blend screens and attrition cells. KPI-JCI also offers additional portable and stationary plants to handle the growing needs in construction sands, specialty sands and fines recovery.  Screening plants are available in both stationary and highly portable models and are complemented by a full line of radial stacking and overland belt conveyors.

KPI-JCI conveying equipment is designed to move or store aggregate and other bulk materials in radial cone-shaped or windrow stockpiles. KPI-JCI's SuperStacker telescoping conveyor and its Wizard Touch automated controls are designed to add efficiency and accuracy to whatever the stockpile specifications require. Additionally, high capacity rail and barge loading/unloading material handling systems are an important part of the KPI-JCI product lines.

During 2014, KPI-JCI introduced three new models in its Global Track ("GT") family of products including a new cone crushing plant, a new jaw crushing plant and a new screening plant.  The GT product line is engineered for contractors and producers new to the aggregate processing, recycle and demolition industries and utilize simple controls that benefit a wide range of users, from novices to experienced producers.  Additionally, a new track mounted cone crushing plant which is larger than its previous offerings and is designed for both mobile and stationary producers was also introduced.

AMS designs, engineers, manufactures and markets mobile screening plants, portable and stationary screen structures and vibrating screens designed for the recycle, crushed stone, sand and gravel, industrial and general construction industries. These screening plants include the AMS Vari-Vibe and Duo-Vibe high frequency screens and a multi-frequency screen. The AMS high frequency screens are used for chip sizing, sand removal, benificating small materials and sizing recycled asphalt where conventional screens are not ideally suited. Certain of AMS products are also available through licensing agreements with TIL, Ltd. in India.

9


BTl designs, engineers, manufactures and markets a complete line of stationary rockbreaker systems for the mining, quarry and recycling industries, and provides large-scale stationary rockbreakers for open pit mining, as well as mid-sized stationary rock breakers for underground applications.  BTl also designs, engineers, manufactures and markets a complete line of four wheel drive articulated production and utility vehicles for underground mining.

In addition to supplying equipment for the mining and quarry industries, BTl also designs, manufactures and markets a complete line of hydraulic breakers, compactors and demolition attachments for the North American construction and demolition markets.

BTl maintains ISO9001:2008 and 14001:2004 certifications, internationally recognized standards of quality and environmental assurance. BTl offers an extensive aftermarket sales and service program through a highly qualified and trained dealer network.

During 2014 BTI added to its utility vehicle product line with a flat deck option and personnel carrier configuration.  BTI also launched a new generation of vibratory plate compactors with the unique feature of isolator mounts angled on two planes for improved longevity and performance as well as several new hydraulic breaker models.

Osborn, which is located in South Africa, maintains an ISO:9001:2008 certification for quality assurance and designs, engineers, manufactures and markets a complete line of minerals processing equipment. This equipment is used in the aggregate, mining, metallurgical and recycling industries. Osborn has been a licensee of Telsmith's technology for over 60 years and recently became a licensee of KPI's vertical and horizontal shaft impact crushers.  Osborn also offers the following equipment: mineral sizers; single and double-toggle jaw crushers; cone crushers; rotary breakers; roll crushers; rolling ring crushers; mills; out-of-balance or exciter-driven screens and feeders; track-mounted or skid mounted crushing and screening plants; and a full range of idlers.  Osborn also markets equipment produced by other Astec companies in the South American market.

Osborn has recently added a number of new products to its product offerings, including a 400 HP gyratory crusher for secondary applications, horizontal shaft impactors, an extension to the range of out-of-balance exciter gearboxes and a low profile apron feeder, in addition to numerous modernization and updates to its existing product lines.

Astec Brazil is in the final phase of constructing a manufacturing facility in Brazil.  Assembly operations began in the newly constructed 132,400 square foot facility in the fourth quarter of 2014 and complete production operations are expected to begin in the first quarter of 2015.  Manufacturing operations, sales, distribution and product support will be located within the new facility, which is expected to employee approximately 120 employees at full capacity.  The new facility will initially manufacture stationary jaw and cone crushers, vibrating feeders, screens and track-mounted crushing units, representing the brands of AMS, KPI-JCI, and Telsmith in the construction and mining industries.  The Company also plans to manufacture other product lines at the facility in the future, such as BTI products for underground mining.  Once fully funded, Astec Brazil is expected to be 75% owned by the Company, with the other 25% being owned by MDE, a recognized leader in providing material handling solutions to the Brazilian market.

During most of 2014, Astec Brazil operated as a distributor in the South American market for the other Astec Aggregate and Mining companies and Astec asphalt plants.
10


Telestack, acquired by the Company in April 2014 and located in Northern Ireland, designs, engineers, manufactures and markets mobile bulk material handling solutions that are designed to handle all free flowing bulk materials including but not limited to ores, coal, aggregates, fertilizers, grains, woodchips and pellets. Telestack maintains ISO9001:2008 accreditation and is currently in the process of obtaining ISO 14001:2004 (Environmental assurance) and ISO 18001:2007 (Health & Safety assurance).

Marketing

Aggregate processing and mining equipment is marketed by approximately 129 direct sales employees, 143 domestic independent distributors and 116 international independent distributors.  The principal purchasers of aggregate processing equipment include highway and heavy equipment contractors, sand and gravel producers, recycle and crushing contractors, mine operators, quarry operators, port and inland terminal authorities, power stations and foreign and domestic governmental agencies.

Raw Materials

Raw materials used in the manufacture of products in the Aggregate and Mining Group include carbon steel and various types of alloy steel, which are normally purchased from distributors.  Raw materials for manufacturing are normally readily available.  BTI purchases hydraulic breakers under a purchasing arrangement with a South Korean supplier.  The Company believes the South Korean supplier has sufficient capacity to meet the Company's anticipated demand; however, alternative suppliers exist for these components should any supply disruptions occur.

Competition

The Aggregate and Mining Group faces strong competition in price, service and product performance.  Aggregate and Mining equipment competitors include Powerscreen, Finlay, Jacques and Cedarapids (all subsidiaries of Terex), Metso, McCloskey, Superior, Klemmann, Deister, F. L. Smith, McLanahan, Sandvik, Weir Minerals and other smaller manufacturers, both domestic and international.

Employees

At December 31, 2014, the Aggregate and Mining Group segment employed 1,682 individuals, of which 1,198 were engaged in manufacturing, 152 in engineering and engineering support functions and 332 in selling, general and administrative functions.

Telsmith has a labor agreement covering approximately 165 manufacturing employees which expires on September 17, 2017.  Approximately 202 of Osborn's manufacturing employees fall within the scope of a collective labor union agreement that expires on June 30, 2017. None of the other employees of the Aggregate and Mining Group are covered by collective bargaining agreements.

Backlog

At December 31, 2014 and 2013, the backlog for the Aggregate and Mining Group was approximately $89,789 and $112,973, respectively.  The December 31, 2013 backlog has been adjusted to include Telestack's backlog for comparability.  Management expects the current backlog to be filled in 2015.
11


Energy Group

The Company's Energy Group is comprised of five business units focused on supplying heavy equipment such as heaters, drilling rigs, concrete plants, wood chippers and grinders, pump trailers, storage equipment and related parts to the oil and gas, construction, and water well industries.  These business units include Heatec, Inc. ("Heatec"), CEI, Inc. ("CEI"), GEFCO, Inc. ("GEFCO"), Astec Underground, Inc. ("Astec Underground") and Peterson Pacific, Inc. ("Peterson").

Products

Heatec designs, engineers, manufactures and markets a variety of thermal fluid heaters, process heaters, waste heat recovery equipment, liquid storage systems and polymer and rubber blending systems under the HEATEC trademark.  For the construction industry, Heatec manufactures a complete line of asphalt heating and storage equipment to serve the hot-mix asphalt industry and water heaters for many industrial applications.  In addition, Heatec builds a wide variety of heaters to fit a broad range of applications, including heating equipment for marine vessels, roofing material plants, refineries, oil sands, energy related processing, chemical processing, rubber plants and agribusiness.  Heatec has the technical staff to custom design heating systems and has systems operating as large as 50 million BTU's per hour.

CEI designs, engineers, manufactures and markets thermal fluid heaters, storage tanks, rubberized asphalt and polymer blending systems and concrete production plants for the polymer, concrete and other industries.  CEI designs and builds heaters with outputs up to 50 million BTU's per hour and portable, vertical and stationary storage tanks up to 50 thousand gallons in capacity.  CEI is a leading supplier of crumb rubber blending plants in the U.S.

GEFCO, which began operations in 1931, designs and manufactures portable drilling rigs and related equipment for the water well, environmental, groundwater monitoring, construction, mining and shallow oil and gas exploration and production industries. Portable drilling rigs are offered in a variety of designs with optional equipment, including truck, trailer or track mounted units, diesel engine on deck or Power Take Off powered units, hydraulic pump drives, transmission, hydraulic pumps and motors, hydraulic cylinders, gear boxes, plumbing and all related controls.

GEFCO is in the process of introducing a new, smaller drilling rig with improved functionality to serve certain geographic locations in the residential geothermal and water well markets.  The new rigs will be offered in both truck-mounted and track-mounted options.

Astec Underground (also referred to as GEFCO-Loudon) manufactures and markets a trailer-mounted double fluid pumper for use in the hydraulic fracturing and the oil and gas extraction industries.  The units include engines, transmissions, gearboxes, application-specific cooling packages, a displacement tank, plumbing and all related controls.  GEFCO Loudon also produces and sells large oil and gas well drilling equipment previously produced by American Augers and provides contract manufacturing for several of the other Astec companies.  The Company plans to close GEFCO Loudon manufacturing facility by May 2015 and transfer the product lines being produced there to the GEFCO Enid Oklahoma facility.  The costs to close the facility are expected to be immaterial and to be less than the savings achieved from combining the two operations.

Peterson designs, engineers, manufactures and distributes large whole-tree pulpwood chippers, biomass chippers, horizontal grinders and blower trucks primarily for the construction, landscaping, recycling, and biomass energy markets.  A deck screen model for the wood chipping and grinding market is produced for Peterson by JCI.  Peterson has granted rights under a licensing agreement to Morbark, USA, whereby Morbark may produce and sell certain grinder equipment covered by a Peterson patent.
12


Marketing

The Energy Group markets its products domestically through a combination of employee sales agents, manufacturer reps and distributors while international sales are typically accomplished with the assistance of independent sales agents.  The group's products are marketed by approximately 65 direct sales employees, 40 domestic independent distributors and 28 international independent distributors. Customers typically include oil and gas field operators, industrial product manufacturers, independent contractors and government agencies.  The market for the Company's heat transfer equipment is diverse because of the multiple applications for such equipment.

Raw Materials

Raw materials used in the manufacture of products in the Energy Group include carbon steel and various types of alloy steel, which are normally purchased from distributors and other sources.  Raw materials for manufacturing are normally readily available.  Most steel is delivered on a "just-in-time" arrangement from suppliers to reduce inventory requirements at the manufacturing facilities, but steel is occasionally inventoried after purchase.  Components used in the manufacturing process include engines, hydraulic pumps and motors, gearboxes, power transmissions and electronic systems.

Competition

The Energy Group faces strong competition in price, service and product performance and competes both with large companies that have resources significantly greater than those of the Company and with various smaller manufacturers.  Major competitors include Gencor, ADM, Meeker, Versa Drill, Schramm, Atlas Copco, National Oil Well, Blohm & Vos, Oil Country, NOV/Rolligon, Stewart & Stevenson, Dragon, Morback, Power Screen (Terex), Precision Doppstadt and Stewart & Stevenson.

Employees

At December 31, 2014, the Energy Group segment employed 861 individuals, of which 603 were engaged in manufacturing, 95 in engineering and 163 in selling, general and administrative functions.  GEFCO has a collective bargaining agreement in place for approximately 90 manufacturing employees.  The current agreement expires on May 31, 2016. None of the other employees of the Energy Group are covered by collective bargaining agreements.

Backlog

The backlog for the Energy Group at December 31, 2014 and 2013 was approximately $95,072 and $48,100, respectively.  Management expects all but approximately $12,000 of the current backlog to be filled in 2015.

Corporate (Other Business Units)

This category consists of the two business units that do not meet the requirements of separate disclosure as an operating segment or inclusion in one of the other reporting segments and includes Astec Industries, Inc., the parent company, and Astec Insurance Company, a captive insurance company.  These two companies provide support and corporate oversight for all the other business units.  The Company records U.S. federal income tax expenses for all business segments on the parent company's books; therefore these taxes are included in the Corporate category for segment reporting.
13



Employees

At December 31, 2014, the Corporate category employed 43 individuals, all of which were engaged in selling, general and administrative functions.

Common to All Operating Segments

The following information applies to all operating segments of the Company.

Raw Materials

Steel is a major component in the Company's equipment.  After steadily increasing during the majority of 2014, steel prices for the first quarter of 2015 are returning to levels consistent with early 2014. Robust import activity is expected to continue into the second quarter of 2015, which should support only modest increases if demand improves. The Company continues to utilize forward-looking contracts coupled with advanced steel purchases to minimize the impact of price increases.  The Company will review the trends in steel prices entering into the second half of 2015 and establish future contract pricing accordingly. 

Government Regulations

The Company is subject to various laws and governmental regulations concerning environmental matters and employee safety and health in the United States and other countries.  The Environmental Protection Agency, the Occupational Safety & Health Administration, other federal agencies and certain state agencies have the authority to promulgate regulations that have an effect on the Company's operations.  Many of these federal and state agencies may seek fines and penalties for violations of these laws and regulations.  The Company has been able to operate under these laws and regulations without any material adverse effect on its business.

None of the Company's operating segments operate within highly regulated industries.  However, air pollution control equipment manufactured by the Company, principally for hot-mix asphalt plants, must comply with certain performance standards promulgated by the federal Environmental Protection Agency under the Clean Air Act applicable to "new sources" or new plants.  Management believes the Company's products meet all material requirements of such regulations and applicable state pollution standards and environmental protection laws.

In addition, due to the size and weight of certain equipment the Company manufactures, the Company and its customers may encounter conflicting state regulations on maximum weights transportable on highways.  Also, some states have regulations governing the operation of asphalt mixing plants, and most states have regulations relating to the accuracy of weights and measures, which affect some of the control systems manufactured by the Company.

Compliance with these government regulations has no material effect on the Company's capital expenditures, earnings, or competitive position within the market.
14


Employees

At December 31, 2014, the Company and its subsidiaries employed 3,952 individuals, of which 2,736 were engaged in manufacturing, 396 in engineering, including support staff, and 820 in selling, administrative and management functions.

Other than the Telsmith and Osborn labor agreements described under the "Employee" subsection of the Aggregate and Mining Group above and the GEFCO labor agreement described under the "Employee" subsection of the Energy Group above, there are no other collective bargaining agreements applicable to employees of the Company or its subsidiaries.  The Company considers its employee relations to be good.

Manufacturing

The Company manufactures many of the component parts and related equipment for its products, while several large components of its products are purchased "ready-for-use".  Such items include engines, axles, tires and hydraulics.  In many cases, the Company designs, engineers and manufactures custom component parts and equipment to meet the particular needs of individual customers.  Manufacturing operations during 2014 took place at 19 separate locations.  The Company's manufacturing operations consist primarily of fabricating steel components and the assembly and testing of its products to ensure that the Company achieves quality control standards.

Seminars and Technical Bulletins

The Company periodically conducts technical and service seminars, which are primarily for dealer representatives, contractors, owners, employees and other users of equipment manufactured by the Company.  In 2014, approximately 430 representatives of contractors and owners of hot-mix asphalt plants attended seminars held by the Company in Chattanooga, Tennessee.  These seminars, which are taught by Company management and employees, along with select outside speakers and discussion leaders, cover a range of subjects, including, but not limited to, technological innovations in the hot-mix asphalt, aggregate processing, paving, milling and recycling markets.

The Company also sponsors executive seminars for the management of the customers of Astec, Heatec, CEI and Roadtec.  Primarily, members of the Company's management conduct the various seminars, but outside speakers and discussion leaders are also utilized.

During 2014, nine service training seminars were held at the Roadtec facility for approximately 550 customer representatives, and seven remote seminars were conducted at other locations for approximately 230 additional customer personnel.  Telsmith conducted four technical seminars for approximately 125 customer and dealer representatives during 2014.  KPI, JCI and AMS jointly conduct National Dealers Conference, an annual dealer event. The event offers the entire dealer network a preview of future products, marketing and promotional programs to help dealers operate successful businesses. In addition to this event, the companies also provide factory customer and dealer training and on-site local, regional and national sales training programs throughout the year.

In addition to seminars, the Company publishes a number of technical bulletins and information bulletins detailing various technological and business issues relating to the industries in which it operates.
15


Patents and Trademarks

The Company seeks to obtain patents to protect the novel features of its products and processes.  The Company's subsidiaries hold 77 United States patents and 37 foreign patents.  The Company's subsidiaries have 43 United States and 74 foreign patent applications pending.  

The Company and its subsidiaries have 81 trademarks registered in the United States, including logos for Astec, Astec Dillman, Astec Underground, Carlson Paving, CEI, Gefco, Heatec, JCI, Peterson Pacific, Roadtec, and Telsmith, and the names ASTEC, CARLSON, HEATEC, JCI, KOLBERG, PETERSON, ROADTEC and TELSMITH, as well as a number of other product names.  The Company also has 77 trademarks registered in foreign jurisdictions, including Australia, Brazil, Canada, China, France, Germany, Great Britain, India, Italy, Mexico, South Africa, South Korea, Thailand, Vietnam and the European Union.  The Company and its subsidiaries have 5 United States and 21 foreign trademark registration applications pending.

Engineering and Product Development

The Company dedicates substantial resources to engineering and product development. At December 31, 2014, the Company and its subsidiaries had 396 full-time individuals employed in engineering and design capacities.

Seasonality and Backlog

Revenues for recent years, adjusted for acquisitions, have been strongest during the first half of the year, with the second half of the year consistently being weaker. We expect future operations in the near term to be typical of this historical trend.

As of December 31, 2014 and 2013, the Company had a backlog for delivery of products at certain dates in the future of approximately $332,051 and $298,193, respectively.  The 2013 backlog has been adjusted to include Telestack's (which was acquired in April 2014) backlog.  The Company's contracts reflected in the backlog generally are not, by their terms, subject to termination.  Management believes the Company is in substantial compliance with all manufacturing and delivery timetables.

Competition

Each business segment operates in domestic markets that are highly competitive with respect to price, service and product quality.  While specific competitors are named within each business segment discussion above, imports do not generally constitute significant competition for the Company in the United States, except for milling machines and track-mounted crushers.  In international sales, however, the Company often competes with foreign manufacturers that may have a local presence in the market the Company is attempting to penetrate.

In addition, asphalt and concrete are generally considered competitive products as a surface choice for new roads and highways.  A portion of the interstate highway system is paved in concrete, but over 90% of all surfaced roads in the United States are paved with asphalt.  Although concrete is used for some new road surfaces, asphalt is used for most resurfacing.
16


Available Information

The Company's internet website can be found at www.astecindustries.com.  We make available, free of charge on or through our internet website, access to our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after such material is filed with, or furnished to, the Securities and Exchange Commission. Information contained in our website is not part of, and is not incorporated into, this Annual Report on Form 10-K.
17


Item 1A. Risk Factors

Downturns in the general economy or the commercial and residential construction industries may adversely affect our revenues and operating results.

General economic downturns, including downturns in the commercial and residential construction industries, could result in a material decrease in our revenues and operating results.  Demand for many of our products, especially in the commercial construction industry, is cyclical.  Sales of our products are sensitive to the states of the U.S., foreign and regional economies in general, and in particular, changes in commercial construction spending and government infrastructure spending.  In addition, many of our costs are fixed and cannot be quickly reduced in response to decreased demand.  The following factors could cause a downturn in the commercial and residential construction industries:

·
a decrease in the availability of funds for construction;
·
declining economy domestically and internationally;
·
labor disputes in the construction industry causing work stoppages;
·
rising gas and oil prices;
·
rising steel prices and steel surcharges;
·
rising interest rates;
·
energy or building materials shortages;
·
inclement weather; and
·
availability of credit for customers.

Downturns in the general economy and restrictions in the credit markets may negatively impact our earnings, cash flows and/or financial position and access to financing sources by the Company and our customers. 
 
Worldwide economic conditions and the international credit markets have significantly deteriorated in recent years and may remain depressed for the foreseeable future. Continued deterioration of economic conditions and credit markets could adversely impact our earnings as sales of our products are sensitive to general declines in U.S. and foreign economies and the ability of our customers to obtain credit.  In addition, we rely on the capital markets and the banking markets to meet our financial commitments and short-term liquidity needs if internal funds are not available from our operations. Further disruptions in the capital and credit markets, or deterioration of our creditors' financial condition, could adversely affect the Company's ability to draw on its revolving credit facility.  The Company's current credit facility expires in April 2017, and deterioration in the credit markets could make it more difficult or expensive for us to replace our current credit facility, enter into a new credit facility or obtain additional financing.

A decrease or delay in government funding of highway construction and maintenance may cause our revenues and profits to decrease.

Many of our customers depend on government funding of highway construction and maintenance and other infrastructure projects.  Any decrease or delay in government funding of highway construction and maintenance and other infrastructure projects could cause our net sales and profits to decrease.  Historically, federal government funding of infrastructure projects has typically been accomplished through bills that establish funding over a multi-year period, such as the Safe, Accountable, Flexible and Efficient Transportation Equity Act - A Legacy for Users ("SAFETEA-LU"), which provided $286.5 billion to fund federal transit projects from 2004 to 2009.  SAFETEA-LU funding expired on September 30, 2009, and federal transportation funding has operated on a number of shorter term appropriations since that date. The most recent funding legislation funds federal transportation expenditures through May 31, 2015.
18


With the current political environment in Washington, the level of funding for federal highway projects is uncertain.  Although continued funding is expected, it may be at lower levels than in the past, and Congress may not enact long-term funding acts in the near future.  In addition, Congress could pass legislation in future sessions that would allow for the diversion of previously appropriated highway funds for other national purposes, or it could restrict funding of infrastructure projects unless states comply with certain federal policies.

The cyclical nature of our industry and the customization of the equipment we sell may cause adverse fluctuations to our revenues and operating results.

We sell equipment primarily to contractors whose demand for equipment depends greatly upon the volume of road or utility construction projects underway or to be scheduled by both government and private entities.  The volume and frequency of road and utility construction projects are cyclical; therefore, demand for many of our products is cyclical.  The equipment we sell is durable and typically lasts for several years, which also contributes to the cyclical nature of the demand for our products.  As a result, we may experience cyclical fluctuations to our revenues and operating results.

A significant change in the price or availability of oil could reduce demand for our products.  Significant increases in the purchase price of certain raw materials used to manufacture our equipment could have a negative impact on the cost of production and related gross margins.

A significant portion of our revenues relates to the sale of equipment involved in the production, handling, recycling or installation of asphalt mix.  Liquid asphalt is a byproduct of the refining of oil, and asphalt prices correlate with the price and availability of oil.  An increase in the price of oil or a decrease in the availability of oil would increase the cost of producing asphalt, which would likely decrease demand for asphalt, resulting in decreased demand for many of our products.  This would likely cause our revenues and profits to decrease.  Rising gasoline, diesel fuel and liquid asphalt prices will also adversely impact the operating and raw material costs of our contractor and aggregate producer customers, and if such customers do not properly adjust their pricing, they could experience reduced profits resulting in possible delays in purchasing capital equipment.

Contrary to the impact of increasing oil prices on many of the Company's products impacted by changes in the cost of asphalt mix as discussed above, the products manufactured by the Company's Energy Group, which are used in drilling for oil and natural gas, in heaters for refineries and oil sands, and in double fluid pump trailers for fracking and oil and gas extraction, would be negatively impacted by lower oil and natural gas prices, to the extent that such lower prices lead to decreased development in the oil and natural gas production industries.
 
        Steel is a major component in the Company's equipment. Steel prices fluctuate routinely. Our reliance on third-party suppliers for steel and other raw materials exposes us to volatility in the prices and availability of these materials. Price increases or a decrease in the availability of these raw materials could increase our operating costs and adversely affect our financial results. 

19


Acquisitions that we have made in the past and future acquisitions involve risks that could adversely affect our future financial results.

We have completed several acquisitions in the past, including the acquisition of Telestack Ltd in April 2014.  We may acquire additional businesses in the future.  We may be unable to achieve the benefits expected to be realized from our acquisitions.  In addition, we may incur additional costs and our management's attention may be diverted because of unforeseen expenses, difficulties, complications, delays and other risks inherent in acquiring businesses, including the following:

·
we may have difficulty integrating the financial and administrative functions of acquired businesses;
·
acquisitions may divert management's attention from our existing operations;
·
fluctuations in exchange rates and a weakening of the dollar may impact the competitiveness of acquired businesses;
·
we may have difficulty in competing successfully for available acquisition candidates, completing future acquisitions or accurately
  estimating the financial effect of any businesses we acquire;
·
we may have delays in realizing the benefits of our strategies for an acquired business;
·
we may not be able to retain key employees necessary to continue the operations of the acquired business;
·
acquisition costs may deplete significant cash amounts or may decrease our operating income;
·
we may choose to acquire a company that is less profitable or has lower profit margins than our company;
·
future acquired companies may have unknown liabilities that could require us to spend significant amounts of additional capital; and
·
we may incur domestic or international economic declines that impact our acquired companies.

Competition could reduce revenue from our products and services and cause us to lose market share.

We currently face strong competition in product performance, price and service.  Some of our domestic and international competitors have greater financial, product development and marketing resources than we have.  If competition in our industry intensifies or if our current competitors enhance their products or lower their prices for competing products, we may lose sales or be required to lower the prices we charge for our products.  This may reduce revenue from our products and services, lower our gross margins or cause us to lose market share.

Our success depends on key members of our management and other employees.

Certain members of our senior management team are of significant importance to our business and operations.  The loss of their services may adversely affect our business.  In addition, our ability to attract and retain qualified engineers, skilled manufacturing personnel and other professionals, either through direct hiring or acquisition of other businesses employing such professionals, will also be an important factor in determining our future success.
20


Difficulties in managing and expanding in international markets could divert management's attention from our existing operations.

In 2014, international sales represented approximately 32.9% of our total sales as compared to 35.8% in 2013.  We plan to continue our significant sales and production efforts in international markets.  In connection with any increase in international sales efforts, we will need to hire, train and retain qualified personnel in countries where language, cultural or regulatory barriers may exist.  Any difficulties in expanding our international sales may divert management's attention from our existing operations.  In addition, international revenues are subject to the following risks:

·
fluctuating currency exchange rates, which can reduce the profitability of foreign sales;
·
the burden of complying with a wide variety of foreign laws and regulations;
·
dependence on foreign sales agents;
·
political and economic instability of governments;
·
the imposition of protective legislation such as import or export barriers; and
·
fluctuating strengths or weakness of the dollar, which can impact net sales or the cost of purchased products.

We may be unsuccessful in complying with the financial ratio covenants or other provisions of our credit agreement.

As of December 31, 2014, we were in compliance with the financial covenants contained in our credit agreement with Wells Fargo Bank, N.A.  However, in the future we may be unable to comply with the financial covenants in our credit facility or to obtain waivers with respect to such financial covenants.  If such violations occur, the Company's creditors could elect to pursue their contractual remedies under the credit facility, including requiring immediate repayment in full of all amounts then outstanding.  As of December 31, 2014, the Company had no outstanding borrowings under the Wells Fargo credit agreement but did have $12,645 of letters of credit outstanding under the credit agreement.  Additional amounts may be borrowed in the future.  The Company's Osborn, Astec Brazil, and Astec Australia subsidiaries have their own independent loan agreements in place.

Our quarterly operating results are likely to fluctuate, which may decrease our stock price.

Our quarterly revenues, expenses and operating results have varied significantly in the past and are likely to vary significantly from quarter to quarter in the future.  As a result, our operating results in some quarters may fall below the expectations of securities analysts and investors, which could result in a decrease in the market price of our common stock.  The reasons our quarterly results may fluctuate include:

·
general competitive and economic conditions, domestically and internationally;
·
delays in, or uneven timing in, the delivery of customer orders;
·
the seasonal trend in our industry;
·
the introduction of new products by us or our competitors;
·
product supply shortages; and
·
reduced demand due to adverse weather conditions.

Period-to-period comparisons of such items should not be relied on as indications of future performance.
21


We may face product liability claims or other liabilities due to the nature of our business.  If we are unable to obtain or maintain insurance or if our insurance does not cover liabilities, we may incur significant costs which could reduce our profitability.

We manufacture heavy machinery, which is used by our customers at excavation and construction sites, ports and inland terminals and on high-traffic roads.  Any defect in or improper operation of our equipment can result in personal injury and death, and damage to or destruction of property, any of which could cause product liability claims to be filed against us.  The amount and scope of our insurance coverage may not be adequate to cover all losses or liabilities we may incur in the event of a product liability claim.  We may not be able to maintain insurance of the types or at the levels we deem necessary or adequate or at rates we consider reasonable.  Any liabilities not covered by insurance could reduce our profitability or have an adverse effect on our financial condition.

If we are unable to protect our proprietary technology from infringement or if our technology infringes technology owned by others, then the demand for our products may decrease or we may be forced to modify our products, which could increase our costs.

We hold numerous patents covering technology and applications related to many of our products and systems as well as numerous trademarks and trade names registered with the U.S. Patent and Trademark Office and in foreign countries.  Our existing or future patents or trademarks may not adequately protect us against infringements, and pending patent or trademark applications may not result in issued patents or trademarks.  Our patents, registered trademarks and patent applications, if any, may not be upheld if challenged, and competitors may develop similar or superior methods or products outside the protection of our patents.  This could reduce demand for our products and materially decrease our revenues.  If our products are deemed to infringe upon the patents or proprietary rights of others, we could be required to modify the design of our products, change the name of our products or obtain a license for the use of some of the technologies used in our products.  We may be unable to do any of the foregoing in a timely manner, upon acceptable terms and conditions, or at all, and the failure to do so could cause us to incur additional costs or lose revenues.

If we become subject to increased governmental regulation, we may incur significant costs.

Our hot-mix asphalt plants contain air pollution control equipment and several of our other products contain engines that must comply with performance standards promulgated by the Environmental Protection Agency.  These performance standards may increase in the future.  Changes in these requirements could cause us to undertake costly measures to redesign or modify our equipment or otherwise adversely affect the manufacturing processes of our products.  Such changes could have a material adverse effect on our operating results.

Also, due to the size and weight of some of the equipment that we manufacture, we often are required to comply with conflicting state regulations on the maximum weight transportable on highways and roads.  In addition, some states regulate the operation of our component equipment, including asphalt mixing plants and soil remediation equipment, and most states regulate the accuracy of weights and measures, which affect some of the control systems we manufacture.  We may incur material costs or liabilities in connection with the regulatory requirements applicable to our business.
22


As an innovative leader in the industries in which we operate, we occasionally undertake the engineering, design, manufacturing and construction of equipment systems that are new to the market.  Estimating the cost of such innovative equipment can be difficult and could result in our realization of significantly reduced or negative margins on such projects.

In the past, we have experienced negative margins on certain large projects. These large contracts included both existing and innovative equipment designs, on-site construction and minimum production levels.  Since it can be difficult to achieve the expected production results during the project design phase, field testing and redesign may be required during project installation, resulting in added cost. In addition, due to any number of unforeseen circumstances, which can include adverse weather conditions, projects can incur extended construction and testing delays which can cause significant cost overruns.  We may not be able to sufficiently predict the extent of such unforeseen cost overruns and may experience significant losses on specialized projects.  Additionally, the Company typically incurs substantial research and development costs each year and has historically received significant research and development tax credits due to these expenditures.  While these tax credits were approved through 2014, they may not be approved for future years.

Our Articles of Incorporation, Bylaws and Rights Agreement and Tennessee law may inhibit a takeover, which could delay or prevent a transaction in which shareholders might receive a premium over market price for their shares.

Our charter and bylaws and Tennessee law contain provisions that may delay, deter or inhibit a future acquisition or an attempt to obtain control of us.  This could occur even if our shareholders are offered an attractive value for their shares or if a substantial number or even a majority of our shareholders believe the takeover is in their best interest.  These provisions are intended to encourage any person interested in acquiring us or obtaining control of us to negotiate with and obtain the approval of our Board of Directors in connection with the transaction.  Provisions that could delay, deter or inhibit a future acquisition or an attempt to obtain control of us include the following:

·
having a staggered Board of Directors;
·
requiring a two-thirds vote of the total number of shares issued and outstanding to remove directors other than for cause;
·
requiring advance notice of actions proposed by shareholders for consideration at shareholder meetings;
·
limiting the right of shareholders to call a special meeting of shareholders;
·
requiring that all shareholders entitled to vote on an action provide written consent in order for shareholders to act without holding a shareholders' meeting; and
·
being governed by the Tennessee Control Share Acquisition Act.

In addition, the rights of holders of our common stock will be subject to, and may be adversely affected by, the rights of the holders of our preferred stock that may be issued in the future and that may be senior to the rights of holders of our common stock.  In December 2005, our Board of Directors approved an Amended and Restated Shareholder Protection Rights Agreement, which provides for one preferred stock purchase right in respect of each share of our common stock ("Rights Agreement").  These rights become exercisable upon the acquisition by a person or group of affiliated persons, other than an existing 15% shareholder, of 15% or more of our then-outstanding common stock by all persons.  This Rights Agreement also could discourage bids for the shares of common stock at a premium and could have a material adverse effect on the market price of our shares.
23


Item 1B. Unresolved Staff Comments

None.

Item 2. Properties

The location, approximate square footage, acreage occupied and principal function and use by the Company's reporting segments of the properties owned or leased by the Company are set forth below:

Location
 
Approximate
Square Footage
   
Approximate
Acreage
 
Principal Function (Use by Segment)
Chattanooga, Tennessee
   
518,000
     
63
 
Offices, manufacturing and training center – Astec (Infrastructure Group)
 
Chattanooga, Tennessee
   
-
     
51
 
Storage yard – Astec (Infrastructure Group)
 
Rossville, Georgia
   
40,500
     
3
 
Manufacturing – Astec (Infrastructure Group)
 
Prairie du Chien, Wisconsin
   
91,500
     
39
 
Manufacturing – Dillman division of Astec (Infrastructure Group)
 
Chattanooga, Tennessee
   
109,700
     
15
 
Offices and manufacturing – Heatec (Energy Group)
 
Chattanooga, Tennessee
   
237,000
     
15
 
Offices, manufacturing and training center – Roadtec (Infrastructure Group)
 
Chattanooga, Tennessee
   
51,200
     
7
 
Manufacturing – Roadtec (Infrastructure Group)
 
Chattanooga, Tennessee
   
14,100
     
--
 
Leased Hanger and Offices – Astec Industries, Inc. (Corporate)
 
Chattanooga, Tennessee
   
10,000
     
2
 
Corporate offices – Astec Industries, Inc. (Corporate)
 
Mequon, Wisconsin
   
236,000
     
30
 
Offices and manufacturing – Telsmith (Aggregate and Mining Group)
 
Sterling, Illinois
   
60,000
     
8
 
Offices and manufacturing – AMS (Aggregate and Mining Group)
 
Orlando, Florida
   
9,000
     
--
 
Leased machine repair and service facility – Roadtec (Infrastructure Group)
 
Loudon, Tennessee
   
327,000
     
112
 
Offices and manufacturing – Astec Underground (Energy Group)
 

24


Location
 
Approximate
Square Footage
   
Approximate
Acreage
 
Principal Function (Use by Segment)
Chattanooga, Tennessee
   
63,000
     
--
 
Leased warehouse – Roadtec (Infrastructure Group)
 
Eugene, Oregon
   
130,000
     
8
 
Offices and manufacturing – JCI (Aggregate and Mining Group)
 
Albuquerque, New Mexico
   
115,000
     
14
 
Offices and manufacturing – CEI (Energy Group) (partially leased to
   a third party)
 
Yankton, South Dakota
   
312,000
     
50
 
Offices and manufacturing – KPI (Aggregate and Mining Group)
 
Thornbury, Ontario, Canada
   
60,500
     
12
 
Offices and manufacturing – BTI (Aggregate and Mining Group)
 
Walkerton, Ontario Canada
   
655
     
--
 
Leased engineering office – BTI (Aggregate and Mining Group)
 
Riverside, California
   
12,500
     
--
 
Leased offices, sales, assembly and warehouse – BTI (Aggregate
   and Mining Group)
 
Solon, Ohio
   
8,900
     
--
 
Leased offices, sales, assembly and warehouse – BTI (Aggregate
  and Mining Group)
 
Tacoma, Washington
   
55,850
     
8
 
Offices and manufacturing – Carlson (Infrastructure Group)
 
Tacoma, Washington
   
4,400
     
1
 
R&D/Services Offices-Carlson (Infrastructure Group)
 
Cape Town, South Africa
   
4,600
     
--
 
Leased sales office and warehouse – Osborn (Aggregate and Mining Group)
 
Durban, South Africa
   
3,800
     
--
 
Leased sales office and warehouse – Osborn (Aggregate and Mining Group)
 
Witbank, South Africa
   
1,000
     
--
 
Leased sales office and warehouse – Osborn (Aggregate and Mining Group)
 
Tullamarine, Australia
   
6,000
     
--
 
Leased office, warehouse and storage yard-Astec Australia Pty Ltd
    (Infrastructure Group)
 

25


Location
 
Approximate
Square Footage
   
Approximate
Acreage
 
Principal Function (Use by Segment)
Johannesburg, South Africa
   
239,000
     
21
 
Offices and manufacturing – Osborn (Aggregate and Mining Group)
 
Eugene, Oregon
   
130,000
     
7
 
Offices and manufacturing – Peterson Pacific Corp. (Energy Group)
 
Enid, Oklahoma
   
350,000
     
42
 
Offices and manufacturing – GEFCO, Inc. (Energy Group)
 
West Columbia, South Carolina
   
12,300
     
--
 
Leased distribution center – Peterson Pacific Corp. (Energy Group)
 
Acacia Ridge, Australia
   
31,000
     
5
 
Offices, warehousing, service, light fabrication and storage yard – Astec
   Australia Pty Ltd (Infrastructure Group)
 
Montgomery, Illinois
   
3,000
     
--
 
Leased warehouse -  Roadtec (Infrastructure Group)
 
Canning Vale, Australia
   
9,000
     
--
 
Leased office, warehouse and storage yard -  Astec Australia Pty Ltd
   (Infrastructure Group)
 
Hameln, Germany
   
35,300
     
3
 
Offices and ight assembly - Asphalt Mobile Machinery GmbH
   (Infrastructure Group)
Vespasiano-MG Brazil
   
132,400
     
10
 
Offices and manufacturing - Astec Brazil (Aggregate and Mining Group
 
Omagh, Northern Ireland
   
85,000
     
8
 
Offices and manufacturing-Telestack (Aggregate and Mining Group)
 

The properties above are owned by the Company unless they are indicated as being leased.

Management believes each of the Company's facilities provides office or manufacturing space suitable for its current needs.  Additionally, management considers the terms under which it leases facilities to be reasonable.
26


Item 3. Legal Proceedings

The Company is currently a party to various claims and legal proceedings that have arisen in the ordinary course of business.  If management believes that a loss arising from such claims and legal proceedings is probable and can reasonably be estimated, the Company records the amount of the loss (excluding estimated legal costs), or the minimum estimated liability when the loss is estimated using a range and no point within the range is more probable than another.  As management becomes aware of additional information concerning such contingencies, any potential liability related to these matters is assessed and the estimates are revised, if necessary.  If management believes that a material loss arising from such claims and legal proceedings is either (i) probable but cannot be reasonably estimated or (ii) reasonably possible but not probable, the Company does not record the amount of the loss, but does make specific disclosure of such matter.  Based upon currently available information and with the advice of counsel, management believes that the ultimate outcome of its current claims and legal proceedings, individually and in the aggregate, will not have a material adverse effect on the Company's financial position, cash flows or results of operations.  However, claims and legal proceedings are subject to inherent uncertainties and rulings unfavorable to the Company could occur.  If an unfavorable ruling were to occur, there exists the possibility of a material adverse effect on the Company's financial position, cash flows or results of operations.

During 2004 the Company received notice from the Environmental Protection Agency that it may be responsible for a portion of the costs incurred in connection with an environmental cleanup in Illinois.  The discharge of hazardous materials and associated cleanup relate to activities occurring prior to the Company's acquisition of Barber Greene in 1986.  The Company believes that over 300 other parties have received similar notice.  At this time, the Company is unable to predict whether the EPA will seek to hold the Company liable for a portion of the cleanup costs or the amount of any such liability.

Item 4. Mine Safety Disclosures

None.

Executive Officers

The name, title, ages and business experience of the executive officers of the Company are listed below.

Benjamin G. Brock has served as the Company's Chief Executive Officer and President since January 2014.  He previously served as the Vice President and President of the Company's Asphalt Group from August 2012 to December 2013 and as President of Astec, Inc. from 2006 to 2013. From 2003 until 2006 he held the position of Vice President - Sales of Astec, Inc. and Vice President/General Manager of CEI Enterprises, Inc. from 1997 until 2002. Mr. Brock's career with Astec began as a salesman in 1993. Mr. Brock is the son of J. Don Brock, Chairman of the Company. Mr. Brock has been a Director of the Company since 2013.  He is 44.

David C. Silvious, a Certified Public Accountant, has served as the Vice President, Chief Financial Officer and Treasurer of the Company since August 2011. He previously served as Corporate Controller of the Company from 2005 to 2011 and as Corporate Financial Analyst from 1999 to 2005. Mr. Silvious also serves as Treasurer of each of the Company's U.S. operating subsidiaries and Vice President of Astec Insurance Company. He is 47.

Richard J. Dorris has served as the Company's Chief Operating Officer and Executive Vice President since January 2014.  He previously served as the Group Vice President and President of the Company's Energy Group from August 2012 to December 2013 and as President of Heatec, Inc. from 2004 to January 2014.  From 1999 to 2004 he held the positions of National Accounts Manager, Project Manager and Director of Projects for Astec, Inc. Prior to joining Astec, Inc. he was President of Esstee Manufacturing Company from 1990 to 1999 and was Sales Engineer from 1984 to 1990. He is 54.
27


J. Don Brock has served as the Company's Chairman of the Board since 1975 and as Chairman of the Company since January 2014.  He also served as President of the Company from its incorporation in 1972 until August 2012 and as the Chief Executive Officer of the Company until December 2013.  Dr. Brock also serves as a director and a member of the Audit Committee of The Dixie Group, Inc., a public company in the floor-covering manufacturing business.  Dr. Brock is the father of Benjamin G. Brock, who is the Chief Executive Officer, President and a Director of the Company.  Dr. Brock has been a Director of the Company since 1972.  He is 76.

W. Norman Smith has served as the Vice Chairman of the Company and also Vice Chairman of its Board of Directors since January 2014.  He previously served as the President and Chief Operating Officer of the Company from August 2012 to December 2013, as Group President of the Company's Mobile Asphalt Paving Group from October 2013 until January 2014, as the Group Vice President – Asphalt of the Company from 1998 until August 2012, as the President of Astec, Inc., a subsidiary of the Company, from 1994 until 2006, and as the President of Heatec, Inc., a subsidiary of the Company, from 1977 until 1994.  Mr. Smith is a registered professional engineer. Mr. Smith has been a Director of the Company since 1982.  He is 75.

Richard A. Patek has served as the Group President of the Company's Aggregate & Mining Group since October 2013 after having served as the Group's Vice President since 2008. He has also served as President of Telsmith, Inc. from May 2001 until February 2013. He served as President of Kolberg-Pioneer, Inc. from 1997 until 2001. From 1995 to 1997, he served as Director of Materials of Telsmith, Inc. From 1992 to 1995, Mr. Patek was Director of Materials and Manufacturing of the former Milwaukee plant location. From 1978 to 1992, he held various manufacturing management positions at Telsmith. Mr. Patek also served as the 2014 Chairman for the Association of Equipment Manufacturers (AEM) and a corporate board member for the Milwaukee School of Engineering.  Mr. Patek was elected to the E.D. Etnyre & Company board of directors in December 2014 He is 58.

Jeffery J. Elliott has served as the Group Vice President of the Company's Aggregate & Mining Group since July 2014.  He served as the President of Johnson Crushers, Inc. from 2001 until July 2014. From 1999 to 2001, he served as Senior Vice President for Cedarapids, Inc. (a Terex company), and from 1996 to 1999, he served as Vice President of the Crushing and Screening Group. From 1978 to 1996, he held various domestic and international sales and marketing positions with Cedarapids, Inc. He is 61.

Stephen C. Anderson has served as Vice President of Administration since August 2011, as Secretary of the Company since January 2007 and as the Director of Investor Relations since January 2003. Mr. Anderson also serves as the Company's Compliance Officer and manages the corporate information technology and aviation departments. He has also been President of Astec Insurance Company since January 2007. He was Vice President of Astec Financial Services, Inc. from 1999 to 2002. Prior to his employment with the Company, Mr. Anderson spent a combined fourteen years in commercial banking with AmSouth and SunTrust Banks. He is 51.

Robin A. Leffew has served as Corporate Controller since August 2011 and also serves as Secretary of Astec Insurance Company. She previously served as the Company's Director of Internal Audit from 2005 to 2011 and Controller of Astec, Inc. from 1990 to 2005. From 1987 to 1990, she served as Corporate Financial Analyst for the Company. She is 53.

Michael A. Bremmer has served as the President of CEI Enterprises, Inc. since 2006. From 2003 until 2006, he held the position of Vice President and General Manager of CEI Enterprises, Inc. From 2001 until 2003, he held the position of Director of Engineering of CEI Enterprises, Inc. He is 59.
28


Chris Colwell has served as President of Carlson Paving Products since May 2011. Prior to joining Astec, Mr. Colwell held the position of Regional Operations Manager for Alta Equipment Company from 2010 to 2011. From 2008 to 2010 he served as Vice President-Asphalt Division for Wolverine Tractor and Equipment Company. From 1999 to 2008 Mr. Colwell served as President of Colwell Equipment Company Incorporated where he previously served in various positions since 1985 including General Manager, Director of Management Information Systems, Assistant Controller and Product Support Manager. He is 49.

Larry R. Cumming has served as the President of Peterson Pacific Corp. since 2007. He joined the company in 2003, prior to which he held positions of General Manager and Chief Executive Officer of Peterson, Inc. Prior to joining Peterson, he held senior management positions in North America and Europe with Timberjack and John Deere (Deere acquired Timberjack in 2000). Mr. Cumming also held prior positions with Timberjack as Vice President Engineering and Senior Vice President Sales and Marketing, Chief Operating Officer and Executive Vice President Product Supply. He is a registered professional engineer in the Province of Ontario. Mr. He is 66.

Timothy Gonigam has served as the President of Astec Mobile Screens, Inc. since 2000. From 1995 to 2000, Mr. Gonigam held the position of Sales Manager of Astec Mobile Screens, Inc. He is 52.

Aaron Harmon has served as President of GEFCO, Inc. since its acquisition by the Company in October 2011. He previously served as President of the GEFCO Division of Blue Tee Corp. since 2005. Mr. Harmon joined GEFCO in 1995 and has served in several capacities within the organization including V. P. of North American Sales and Operations Manager. He is 41.

Matthew B. Haven has served as the President of Telsmith, Inc. since February 2013.  He previously served as Executive Vice President and General Manager of Telsmith from January 2012 to February 2013 and as Vice President from 2008 to 2011.  Mr. Haven joined Telsmith in January 1997 and served as Chief Engineer, Research and Development and Director of Engineering prior to his appointment as Vice President.  Prior to joining Telsmith, Mr. Haven served as Chief Engineer, Product Design and Development of Cedarapids, Inc.  He is 53.

Tom Kruger has served as the Managing Director of Osborn Engineered Products SA (Pty) Ltd since 2005. For the previous five years, Mr. Kruger was employed as Operations Director of Macsteel Tube and Pipe (Pty) Ltd, a manufacturer of carbon steel tubing in Johannesburg, South Africa. He served as Sales and Marketing Director of Macsteel prior to becoming Operations Director. From 1993 to 1998, Mr. Kruger was employed by Barloworld Ltd as Operations Director and Regional Managing Director responsible for a trading organization in steel, tube and water conveyance systems. Prior to that, he held the position of Works Director. He is 57.

Jeffrey L. May has served as the President of Kolberg-Pioneer, Inc. since September 2013.  He previously served as the Vice President of Operations and Finance of Kolberg-Pioneer, Inc. from 2011 to 2013 and as Controller of Kolberg-Pioneer, Inc. from 1997 to 2010.  He is 51.

Adrian A. McCutcheon has served as Managing Director of Telestack Limited since its acquisition by the Company in April 2014.  He previously served as Part Owner / Managing Director of the company prior to acquisition from May 2008. He previously held a number of positions in finance, operations and business development within the Terex Material Processing division of Terex Corporation. Mr. McCutcheon is a Qualified Chartered Management Accountant.  He is 43.

Jeffrey L. Richmond, Sr. has served as the President of Roadtec, Inc. since 2004. From 1996 until 2004, he held the positions of Sales Manager, Vice President of Sales and Marketing and Vice President/General Manager of Roadtec, Inc. He is 59.
29


Jeffrey M. Schwarz has served as President of Johnson Crushers, Inc. ("JCI") since July 2014.  He joined JCI as General Manager of AggReCon West, a division of JCI responsible for selling direct in the Pacific Northwest.  Prior to joining JCI he was Aggregates Manager for Kerr Contractors and held several management positions with a construction materials supplier from 1995 to 2008.  He is 48.

Donald J. Sissons has served as the President of Breaker Technology Ltd. and Breaker Technology Inc. since January 2014.  He previously served as Vice President of Manufacturing Operations from 2012 to January 2014 and as Plant Operations Manager from December 2003 until January 2012.  Mr. Sissons is registered as a Professional Engineer. He is 48.

David H. Smale has served as the General Manager of Astec Australia Pty Ltd since 2008. He served as the General Manager of Allen's Asphalt from 2006 to 2008 and as their Operations Manager from 2004 to 2006. He is 59.

Malcolm L. Swanson has served as the President of Astec, Inc. since January 2014.  He previously served as Vice President – Engineering of Astec, Inc. from 1995 to 2013 and as Chief Engineer of Astec, Inc. from 1989 to 1995.  Prior to joining Astec, Inc., Mr. Swanson worked as a design engineer and project manager for Combustion Engineering of Chattanooga, TN in both the Fossil and Nuclear Power divisions. Mr. Swanson is a Professional Engineer holding registration in eight states.  He is 66.

Thomas H. Wilkey has served as the President of Heatec, Inc. since January 2014.  From 1987 to 2004, he held the positions of Sales coordinator, Sales Manager, and Vice-President of Sales of Heatec, Inc., and in 2004 he became its Executive Vice President.  He is 61.

PART II

Item 5. Market for Registrant's Common Equity; Related Stockholder Matters and Issuer Purchases
of Equity Securities

The Company's Common Stock is traded in the Nasdaq National Market under the symbol "ASTE."  The Company paid a cash dividend of $1.00 per share on its Common Stock in the fourth quarter of 2012 and paid quarterly cash dividends of $0.10 per quarter from the second quarter of 2013 through the fourth quarter of 2014.  Prior to 2012, the Company had not paid any cash dividends.

The high and low sales prices of the Company's Common Stock as reported on the Nasdaq National Market for each quarter during the last two fiscal years are as follows:

   
Price Per Share
 
2014
 
High
   
Low
 
1st Quarter
 
$
46.00
   
$
35.07
 
2nd Quarter
 
$
44.27
   
$
38.00
 
3rd Quarter
 
$
44.97
   
$
36.45
 
4th Quarter
 
$
41.09
   
$
34.28
 
                 
                 
   
Price Per Share
 
2013
 
High
   
Low
 
1st Quarter
 
$
36.99
   
$
33.50
 
2nd Quarter
 
$
35.85
   
$
30.87
 
3rd Quarter
 
$
37.50
   
$
33.15
 
4th Quarter
 
$
39.01
   
$
33.23
 

As of February 17, 2015 there were approximately 300 record holders of the Company's Common Stock.
30


Item 6. Selected Financial Data

Selected financial data appears in Appendix "A" of this Report.

Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations

Management's discussion and analysis of financial condition and results of operations appears in Appendix "A" of this Report.

Item 7A. Quantitative and Qualitative Disclosures about Market Risk

Information regarding the Company's market risk appears in Appendix "A" of this Report under the heading "Market Risk and Risk Management Policies."

Item 8. Financial Statements and Supplementary Data

Financial statements and supplementary financial information appear in Appendix "A" of this Report.

Item 9. Changes In and Disagreements with Accountants on Accounting and Financial Disclosure

None.

Item 9A. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

The Company maintains disclosure controls and procedures that are designed to ensure that information required to be disclosed by the Company in the reports it files or submits under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC's rules and forms, and that such information is accumulated and communicated to the Company's management, including its principal executive officer and principal financial officer, as appropriate to allow timely decisions regarding required disclosure.

The Company's management, under the supervision and with the participation of the Company's principal executive officer and principal financial officer, has evaluated the effectiveness of the Company's disclosure controls and procedures as of the end of the period covered by this report. Based upon that evaluation, the Company's principal executive officer and principal financial officer concluded that, as of the end of the period covered by this report, the Company's disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act) were effective.

Management's Report on Internal Control over Financial Reporting
Management's report appears in Appendix A of this Report.

Changes in Internal Controls
There have been no changes in the Company's internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) during the fourth quarter of the year ended December 31, 2014 that have materially affected, or are reasonably likely to materially affect, the Company's internal control over financial reporting.


Item 9B. Other Information

None
31


PART III

Item 10. Directors, Executive Officers and Corporate Governance

Information regarding the Company's directors, director nominating process, audit committee and audit committee financial expert is included under the captions "Certain Information Concerning Nominees and Directors" and "Corporate Governance" in the Company's Proxy Statement to be delivered to the shareholders of the Company in connection with the Annual Meeting of Shareholders to be held on April 23, 2015 (referred to herein as the Company's 2015 Proxy Statement), which is incorporated herein by reference.  Information regarding compliance with Section 16(a) of the Exchange Act is also included under the caption "Section 16(a) Beneficial Ownership Reporting Compliance" in the Company's 2015 Proxy Statement, which is incorporated herein by reference.  Information with respect to our executive officers is set forth in Part I of this Report under the caption "Executive Officers."

The Company's Board of Directors has approved a Code of Conduct and Ethics that applies to the Company's employees, directors and officers (including the Company's principal executive officer, principal financial officer and principal accounting officer).  The Code of Conduct and Ethics is available on the Company's website at www.astecindustries.com/investors/.

Item 11. Executive Compensation

Information included under the captions "Compensation Discussion and Analysis", "Executive Compensation", "Director Compensation", "Corporate Governance—Compensation Committee Interlocks and Insider Participation" and "Compensation Committee Report" in the Company's 2015 Proxy Statement is incorporated herein by reference.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Shareholder
  Matters

Equity Compensation Plan Information

The following table provides information as of December 31, 2014 regarding compensation plans under which the Company's equity securities are authorized for issuance.

Plan Category
 
(a) Number of Securities to be Issued Upon Exercise of Outstanding Options, Warrants, Rights and RSU's
   
(b) Weighted Average Exercise
Price of Outstanding
Options, Warrants and Rights
   
(c) Number of Securities Remaining Available for Future Issuance Under Equity Compensation Plans (Excluding Securities Reflected in
Column (a))
 
Equity Compensation Plans Approved by Shareholders (1)
   
197,864
(2) 
 
$
28.13
(3) 
   
636,336
(4) 
                         
Equity Compensation Plans Not Approved by Shareholders (5)
   
22,072
(6) 
 
$
30.52
(7) 
   
91,255
(8) 
 
Total
   
219,936
             
727,591
 

32


(1)
These plans consist of our 1998 Long-Term Incentive Plan, our 2006 Incentive Plan and our 2011 Incentive Plan.
(2)
Includes 729 Stock Options granted under our 1998 Long-Term Incentive Plan, 136,370 Restricted Stock Units granted under
  our 2006 Incentive Plan and 60,765 Restricted Stock Units granted under our 2011 Incentive Plan.
(3)
Weighted average exercise price of outstanding Stock Options; excludes Restricted Stock Units.
(4)
Represents shares available for issuance under our 2011 Incentive Plan.
(5)
This plan consists of our 1998 Non-Employee Director Stock Incentive Plan.
(6)
Includes 1,686 Stock Options and 20,386 Deferred Stock Units granted under our 1998 Non-Employee Director Stock Incentive Plan.
(7)
Weighted average exercise price of outstanding Stock Options; excludes Deferred Stock Units.
(8)
Represents shares available for issuance under our 1998 Non-Employee Director Stock Incentive Plan.

Equity Compensation Plans Not Approved by Shareholders

Our 1998 Non-Employee Directors Stock Incentive Plan provides that annual retainers payable to our non-employee directors will be paid in the form of cash, unless the director elects to receive the annual retainer in the form of common stock, deferred stock or stock options. If the director elects to receive Common Stock, whether on a current or deferred basis, the number of shares to be received is determined by dividing the dollar value of the annual retainer by the fair market value of the Common Stock on the date the retainer is payable. If the director elects to receive stock options, the number of options to be received is determined by dividing the dollar value of the annual retainer by the Black-Scholes value of an option on the date the retainer is payable.

Information included under the caption "Stock Ownership of Certain Beneficial Owners and Management" in the Company's 2015 Proxy Statement is incorporated herein by reference.

Item 13. Certain Relationships and Related Transactions and Director Independence

Information included under the captions "Corporate Governance—Independent Directors" and "Transactions with Related Persons" in the Company's 2015 Proxy Statement is incorporated herein by reference.

Item 14. Principal Accounting Fees and Services

Information included under the caption "Audit Matters" in the Company's 2015 Proxy Statement is incorporated herein by reference.
33


PART IV

Item 15. Exhibits and Financial Statement Schedules

(a)(1)  The following financial statements and other information appear in Appendix "A" to this Report and are filed as a part hereof:

 
Selected Consolidated Financial Data.
 
Management's Discussion and Analysis of Financial Condition and Results of Operations.
 
Management's Report on Internal Control over Financial Reporting.
 
Reports of Independent Registered Public Accounting Firm.
 
Consolidated Balance Sheets at December 31, 2014 and 2013.
 
Consolidated Statements of Income for the Years Ended December 31, 2014, 2013 and 2012.
 
Consolidated Statements of Comprehensive Income for the Years Ended December 31, 2014, 2013 and 2012.
 
Consolidated Statements of Cash Flows for the Years Ended December 31, 2014, 2013 and 2012.
 
Consolidated Statements of Equity for the Years Ended December 31, 2014, 2013 and 2012.
 
Notes to Consolidated Financial Statements.

(a)(2) Financial Statement Schedules are not filed with this Report because the Schedules are either inapplicable or the required information is presented in the Financial Statements or Notes thereto.

(a)(3) The following Exhibits are incorporated by reference into or are filed with this Report:
 
3.1
 
Amended and Restated Charter of the Company, adopted on April 28, 1986 and amended on September 7, 1988, May 31, 1989 and
  January 15, 1999 (incorporated by reference from the Company's Quarterly Report on Form 10-Q for the period ended September
  30, 2011).
 
3.2
 
Amended and Restated Bylaws of the Company, adopted on March 14, 1990 and amended on July 29, 1993, July 26, 2007 and July 23,
  2008 (incorporated by reference from the Company's Quarterly Report on Form 10-Q for the period ended March 31, 2011).
 
4.1
 
Amended and Restated Shareholder Protection Rights Agreement, dated as of December 22, 2005, by and between the Company and
  Mellon Investor Services LLC, as Rights Agent (incorporated by reference from the Company's Current Report on Form 8-K dated
  December 22, 2005).
 
10.1
 
Trust under Astec Industries, Inc. Supplemental Retirement Plan, dated January 1, 1996 (incorporated by reference from the Company's
  Annual Report on Form 10-K for the year ended December 31, 1995). *
 
10.2
 
Astec Industries, Inc. 1998 Long-Term Incentive Plan (incorporated by reference from Appendix A of the Company's Proxy Statement
  for the 1998 Annual Meeting of Shareholders). *
  10.3  
Astec Industries, Inc. 1998 Non-Employee Directors' Stock Incentive Plan (incorporated by reference from the Company's Annual
  Report on Form 10-K for the year ended December 31, 1999). *
  10.4   Amendment Number 1 to Astec Industries, Inc. 1998 Non-Employee Directors' Stock Incentive Plan, dated March 15, 2005
  (incorporated by reference from the Company's Curent Report on Form 8-K dated March 15, 2005)  *
 
34


    
 
10.5
 
Amendment Number 2 to the Astec Industries, Inc. 1998 Non-Employee Directors Stock Incentive Plan, dated February 21, 2006
 
(incorporated by reference from the Company's Current Report on Form 8-K dated February 27, 2006). *
 
10.6
 
Amendment Number 3 to the Astec Industries, Inc. 1998 Non-Employee Directors Stock Incentive Plan (incorporated by reference from
  the Company's Annual Report on form 10-K for the year ended December 31, 2008). *
 
10.7
 
Astec Industries, Inc. 2006 Incentive Plan (incorporated by reference from Appendix A of the Company's Proxy Statement for the 2006
  Annual Meeting of Shareholders). *
 
10.8
 
Amendment Number 1 to Astec Industries, Inc. 2006 Incentive Plan (incorporated by reference from the Company's Annual Report on
  form 10-K for the year ended December 31, 2008).*
 
10.9
 
Astec Industries, Inc. Supplemental Executive Retirement Plan, as amended and restated through January 1, 2009 (incorporated by
  reference from the Company's Annual Report on Form 10-K for the year ended December 31, 2008). *
 
10.10
 
Amendment One to the Amended and Restated Astec Industries, Inc. Supplemental Executive Retirement Plan effective October 21,
  2010 (incorporated by reference from the Company's Annual Report on Form 10-K for the year ended December 31, 2010). *
 
10.11
 
Astec Industries, Inc. 2011 Incentive Plan (incorporated by reference from Appendix A of the Company's Proxy Statement for the 2011
  Annual Meeting of Shareholders). *
 
10.12
 
Amendment to Appendix A of the Astec Industries, Inc. Supplemental Executive Plan effective August 1, 2011 (incorporated by
  reference from the Company's Quarterly Report on Form 10-Q for the period ended September 30, 2011). *
 
 
10.13
 
Asset Purchase Agreement, dated August 4, 2011, between Astec Industries, Inc. and Blue Tee Corp. (incorporated by reference from
  the company's Quarterly Report on 10-Q for the period ended September 30, 2011).
 
10.14
 
Amendment to Appendix A of the Astec Industries, Inc. Supplemental Executive Plan effective November 1, 2011 (incorporate by
  reference from the company's Annual Report on form 10-K for the year ended December 31, 2011). *
 
10.15
 
Amended and Restated Credit Agreement, dated as of April 12, 2012, between Astec Industries, Inc. and Certain of its Subsidiaries and
  Wells Fargo Bank, National Association (incorporated by reference from the Company's Quarterly Report on Form 10-Q for the period
  ending March 31, 2012).
 
10.16
 
Stock Purchase Agreement, dated as of October 31, 2012, among Astec Industries, Inc., American Augers, Inc. and The Charles
  Machine Works, Inc. (incorporated by reference from the Company's Annual Report on Form 10-K for the period ending December
  31, 2012).
 
10.17
 
Asset Purchase Agreement, dated as of October 31, 2012, among Astec Industries, Inc., Astec Underground, Inc. and The Charles
  Machine Works, Inc. (incorporated by reference from the Company's Annual Report on Form 10-K for the period ending December
  31, 2012).
 
10.18
 
Amendment to Appendix A of the Astec Industries, Inc. Supplemental Executive Retirement Plan, effective February 28, 2013
  (incorporated by reference from the Company's Quarterly Report on Form 10-Q for the period ending March 31, 2013). *
 
10.19
 
Amendment to "Appendix A" of the Astec Industries, Inc. Supplemental Executive Retirement Plan, effective April 25, 2013
  (incorporated by reference from the Company's Quarterly Report on Form 10-Q for the period ending June 30, 2013). *
 
10.20
 
Amendment to "Appendix A" of the Astec Industries, Inc. Supplemental Executive Retirement Plan, effective October 24, 2013
  (incorporated by reference from the Company's Quarterly Report on Form 10-Q for the period ending September 30, 2013). *
 
10.21
 
Amendment to "Appendix A" of the Astec Industries, Inc. Supplemental Executive Retirement Plan, effective July 24, 2014
  (incorporated by reference from the Company's Quarterly Report on Form 10-Q for the period ending June 30, 2014). *
 
21
 
Subsidiaries of the Registrant.
 
35

    
 
23
 
Consent of Independent Registered Public Accounting Firm.
 
31.1
 
Certification of Chief Executive Officer of Astec Industries, Inc. pursuant Rule 13a-14(a)/15d-14(a), as adopted pursuant to Section 302
  of the Sarbanes-Oxley Act Of 2002.
 
31.2
 
Certification of Chief Financial Officer of Astec Industries, Inc. pursuant Rule 13a-14(a)/15d-14(a), as adopted pursuant to Section 302
  of the Sarbanes-Oxley Act Of 2002.
 
32
 
Certification of Chief Executive Officer and Chief Financial Officer of Astec Industries, Inc. pursuant to 18 U.S.C. Section 1350, as
  adopted pursuant to Section 906 of the Sarbanes-Oxley Act Of 2002.
 
101.INS
 
XBRL Instance Document
 
101.SCH
 
XBRL Taxonomy Extension Schema
 
101.CAL
 
XBRL Taxonomy Extension Calculation Linkbase
 
101.DEF
 
XBRL Taxonomy Extension Definition Linkbase
 
101.LAB
 
XBRL Taxonomy Extension Label Linkbase
 
101.PRE
 
XBRL Taxonomy Extension Presentation Linkbase
     
 
*
 
Management contract or compensatory plan or arrangement.
     

(b)
The Exhibits to this Report are listed under Item 15(a)(3) above.
(c)
The Financial Statement Schedules to this Report are listed under Item 15(a)(2) above.

The Exhibits are numbered in accordance with Item 601 of Regulation S-K.  Inapplicable Exhibits are not included in the list.

36


APPENDIX "A"
to
ANNUAL REPORT ON FORM 10-K

ITEMS 6, 7, 7A, 8, 9A and 15(a)(1), (2) and (3) and 15(b) and 15(c)

INDEX TO FINANCIAL STATEMENTS AND
 FINANCIAL STATEMENT SCHEDULES


ASTEC INDUSTRIES, INC.



Contents
Page
   
Selected Consolidated Financial Data
A-3
   
Supplementary Financial Data
A-4
   
Management's Discussion and Analysis of Financial Condition and Results of Operations
A-5
   
Management's Report on Internal Control over Financial Reporting
A-21
   
Reports of Independent Registered Public Accounting Firm
A-22
   
Consolidated Balance Sheets at December 31, 2014 and 2013
A-24
   
Consolidated Statements of Income for the Years Ended December 31, 2014, 2013 and 2012
A-25
   
Consolidated Statements of Comprehensive Income for the Years Ended December 31, 2014, 2013 and 2012
A-26
   
Consolidated Statements of Cash Flows for the Years Ended December 31, 2014, 2013 and 2012
A-27
   
Consolidated Statements of Equity for the Years Ended December 31, 2014, 2013 and 2012
A-29
   
Notes to Consolidated Financial Statements
A-30
   
Comparison of 5-Year Cumulative Total Return
A-56

A-1




















FINANCIAL INFORMATION
 
 
 
 
 
 
 
 
A-2

 
SELECTED CONSOLIDATED FINANCIAL DATA
(in thousands, except as noted*)

   
2014
   
2013
   
2012
   
2011
   
2010
 
Consolidated Statement of Income Data
                   
Net sales
 
$
975,5955
   
$
932,998
   
$
936,273
   
$
908,641
   
$
737,084
 
Gross profit1
   
215,316
     
207,119
     
207,951
     
211,533
     
175,929
 
Gross profit %
   
22.1
%
   
22.2
%
   
22.2
%
   
23.3
%
   
23.9
%
Selling, general and administrative
expenses2
   
141,490
     
133,337
     
136,323
     
132,371
     
109,354
 
Research and development
   
22,129
     
18,101
     
20,520
     
20,764
     
15,987
 
Income from operations
   
51,697
     
55,681
     
51,108
     
58,398
     
50,588
 
Interest expense
   
720
     
423
     
339
     
190
   
339 
 
Other income (expense), net
   
1,207
     
1,937
     
1,783
     
1,082
     
632
 
Net income from continuing operations
   
34,206
     
39,214
     
34,210
     
40,440
     
34,648
 
Income (loss) from discontinued
operations, net of tax
   
--
     
--
     
3,401
     
225
     
(1,269
)
Gain on sale of subsidiary, net of tax
   
--
     
--
     
3,378
     
--
     
--
 
Net income
   
34,206
     
39,214
     
40,989
     
40,665
     
33,379
 
Net income attributable to controlling
interest
   
34,458
     
39,042
     
40,828
     
40,563
     
33,237
 
Earnings (loss) per common share*
                                       
Net income attributable to controlling
interest from continuing operations
                                       
Basic
   
1.51
     
1.72
     
1.50
     
1.79
     
1.53
 
Diluted
   
1.49
     
1.69
     
1.48
     
1.76
     
1.51
 
Income (loss) from discontinued
operations
                                       
Basic
   
--
     
--
     
0.30
     
0.01
     
(0.06
)
Diluted
   
--
     
--
     
0.29
     
0.01
     
(0.06
)
Net income attributable to controlling
interest
                                       
Basic
   
1.51
     
1.72
     
1.80
     
1.80
     
1.48
 
Diluted
   
1.49
     
1.69
     
1.77
     
1.76
     
1.46
 
                                         
Consolidated Balance Sheet Data
                                       
Working capital
 
$
392,062
   
$
388,880
   
$
358,536
   
$
333,719
   
$
318,936
 
Total assets
   
805,465
     
749,291
     
728,783
     
719,481
     
651,549
 
Total short-term debt
   
3,841
     
34
     
--
     
--
     
--
 
Long-term debt, less current maturities
   
7,061
     
510
     
--
     
--
     
--
 
Total equity
   
599,352
     
580,511
     
550,734
     
531,298
     
494,276
 
Cash dividends declared per common
share*
   
0.40
     
0.30
     
1.00
     
--
     
--
 
Book value per diluted common share
at year-end*
   
25.76
     
24.99
     
23.82
     
23.09
     
21.63
 

12011 Gross profit includes charges of $2,162 related to sale of utility product line assets in the Energy Group.
22011 Selling, general and administrative expenses include an impairment charge of $2,304 related to aviation equipment classified as held for sale during 2011.
A-3


SUPPLEMENTARY FINANCIAL DATA
(in thousands, except as noted*)
 
Quarterly Financial Highlights
(Unaudited)
 
First Quarter
   
Second Quarter
   
Third Quarter
   
Fourth Quarter
 
                 
2014Net sales
 
$
238,673
   
$
277,256
   
$
220,157
   
$
239,509
 
Gross profit
   
56,757
     
62,178
     
43,261
     
53,120
 
Net income
   
9,547
     
14,489
     
1,766
     
8,404
 
Net income attributable to controlling interest
   
9,545
     
14,497
     
1,916
     
8,500
 
Earnings per common share*
                               
Net income attributable to controlling interest:
                               
Basic
   
0.42
     
0.64
     
0.08
     
0.37
 
Diluted
   
0.41
     
0.63
     
0.08
     
0.37
 
                                 
2013Net sales
 
$
247,833
   
$
248,127
   
$
213,177
   
$
223,8611
 
Gross profit
   
58,567
     
55,442
     
45,787
     
47,323
 
Net income
   
13,251
     
11,152
     
6,527
     
8,284
 
Net income attributable to controlling interest
   
13,171
     
11,092
     
6,514
     
8,265
 
Earnings per common share*
                               
Net income attributable to controlling interest:
                               
Basic
   
0.58
     
0.49
     
0.29
     
0.36
 
Diluted
   
0.57
     
0.48
     
0.28
     
0.36
 
                                 
                                 
Common Stock Price*
                               
2014 High
 
$
46.00
   
$
44.27
   
$
44.97
   
$
$41.09
 
2014 Low
   
35.07
     
38.00
     
36.45
     
34.28
 
                                 
2013 High
 
$
36.99
   
$
35.85
   
$
37.50
   
$
$39.01
 
2013 Low
   
33.50
     
30.87
     
33.15
     
33.23
 

The Company's common stock is traded in the Nasdaq National Market under the symbol ASTE. Prices shown are the high and low sales prices as announced by the Nasdaq National Market. The Company paid a dividend of $1.00 per share on its common stock in the fourth quarter of 2012. On February 28, 2013, the Company's Board of Directors approved a dividend policy pursuant to which the Company began paying a quarterly $0.10 per share dividend on its common stock beginning in the second quarter of 2013. The Company paid quarterly dividends of $0.10 per common share to shareholders in the second, third and fourth quarters of 2013 and each quarter in 2014. As determined by the proxy search on the record date for the Company's 2015 annual shareholders' meeting, the number of holders of record is approximately 300.
A-4


MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
(Dollar and share amounts in thousands, except per share amounts, unless otherwise specified)
 
Explanatory Note

As previously disclosed in its Annual Report on Form 10-K for the year ended December 31, 2013 and its Quarterly Report on Form 10-Q for the quarter ended March 31, 2014, due to the recent change in the Company's chief operating decision maker, the sale of a Company subsidiary and other product lines, and the transfer of responsibility for certain product lines between Company subsidiaries, the Company performed an evaluation of its reportable segments composition. This process was completed during the first quarter of 2014 and the composition of the Company's reportable segments was changed beginning with the Company's Form 10-Q for the quarter ended March 31, 2014. Financial information by segment is included in Note 17 to the accompanying financial statements and elsewhere in Management's Discussion and Analysis of Financial Condition and Results of Operations. Historical segment information included in this Report has been reclassified to reflect the new segment structure.

The following discussion contains forward-looking statements that involve inherent risks and uncertainties. Actual results may differ materially from those contained in these forward-looking statements. For additional information regarding forward-looking statements, see "Forward-looking Statements" on page A-19.

Overview

Astec Industries, Inc. (the "Company") is a leading manufacturer and seller of equipment for the road building, aggregate processing, geothermal, water, oil and gas, and wood processing industries. The Company's businesses:

·
design, engineer, manufacture and market equipment that is used in each phase of road building, including quarrying and
  crushing the aggregate, mobile bulk and material handling solutions, producing asphalt or concrete, recycling old asphalt
  or concrete and applying the asphalt;

·
design, engineer, manufacture and market additional equipment and components, including equipment for geothermal drilling,
  oil and natural gas drilling, industrial heat transfer, wood chipping and grinding, and wood pellet processing; and

·
manufacture and sell replacement parts for equipment in each of its product lines.

Astec Industries, Inc. consists of 19 companies: 16 manufacturing companies, 2 companies that operate as dealers for the manufacturing companies and a captive insurance company.  The companies fall within three reportable operating segments: the Infrastructure Group, the Aggregate and Mining Group and the Energy Group. The Infrastructure Group is made up of five business units, three of which design, engineer, manufacture and market a complete line of asphalt plants, asphalt pavers, wood pellet plants and related components and ancillary equipment. The two remaining companies in the Infrastructure Group primarily sell, service and install equipment produced by the manufacturing subsidiaries of the Company with the majority of sales to the infrastructure industry.  The Aggregate and Mining Group consists of eight business units that design, manufacture and market heavy equipment and parts in the aggregate, metallic mining, quarrying, recycling, ports and bulk handling industries. The Energy Group consists of five business units that design, manufacture and market heaters, drilling rigs, concrete plants, wood chippers and grinders, pump trailers, storage equipment and related parts to the oil and gas, construction, and water well industries. The Company also has one other category, Corporate, that contains the business units that do not meet the requirements for separate disclosure as a separate operating segment or inclusion in one of the other reporting segments. The business units in the Corporate category are Astec Insurance Company ("Astec Insurance" or "the captive") and Astec Industries, Inc., the parent company. These two companies provide support and corporate oversight for all the companies that fall within the reportable operating segments.

The Company's financial performance is affected by a number of factors, including the cyclical nature and varying conditions of the markets it serves. Demand in these markets fluctuates in response to overall economic conditions and is particularly sensitive to the amount of public sector spending on infrastructure development, privately funded infrastructure development, changes in the price of crude oil, which affects the cost of fuel and liquid asphalt, and changes in the price of steel.
A-5



The Company believes that federal highway funding influences the purchasing decisions of the Company's customers, who are typically more comfortable making capital equipment purchases with long-term federal legislation in place. Federal funding provides for approximately 25% of all highway, street, roadway and parking construction in the United States.

In July 2012, the "Moving Ahead for Progress in the 21st Century Act" ("Map-21") was approved by the U.S. federal government, which authorized $105 billion of federal spending on highway and public transportation programs through fiscal year 2014. In August 2014, the U.S. government approved short-term funding of $10.8 billion through May 2015.  The Company believes a longer multi-year highway program would have the greatest positive impact on the road construction industry and allow its customers to plan and execute longer-term projects. The level of future federal highway construction is uncertain and any future funding may be at lower levels than in the past.

In recent years, several other countries have implemented infrastructure spending programs to stimulate their economies. The Company believes these spending programs have had a positive impact on its financial performance; however, the magnitude of that impact cannot be determined.

The public sector spending described above is needed to fund road, bridge and mass transit improvements. The Company believes that increased funding is unquestionably needed to restore the nation's highways to a quality level required for safety, fuel efficiency and mitigation of congestion. In the Company's opinion, amounts needed for such improvements are significantly greater than amounts approved to date, and funding mechanisms such as the federal usage fee per gallon of gasoline, which has not been increased in over 20 years, would likely need to be increased along with other measures to generate the funds needed.

In addition to public sector funding, the economies in the markets the Company serves, the price of oil and its impact on customers' purchasing decisions and the price of steel may each affect the Company's financial performance. Economic downturns generally result in decreased purchasing by the Company's customers, which, in turn, causes reductions in sales and increased pricing pressure on the Company's products. Rising interest rates also typically negatively impact customers' attitudes toward purchasing equipment. The Federal Reserve has maintained historically low interest rates in response to the economic downturn which began in 2009; however, interest rates may increase in 2015.

Significant portions of the Company's revenues from the Infrastructure Group relate to the sale of equipment involved in the production, handling, recycling or installation of asphalt mix. Liquid asphalt is a by-product of oil production. An increase or decrease in the price of oil impacts the cost of asphalt, which is likely to alter demand for asphalt and therefore affect demand for certain Company products. While increasing oil prices may have a negative financial impact on many of the Company's customers, the Company's equipment can use a significant amount of recycled asphalt pavement, thereby mitigating the effect of increased oil prices on the final cost of asphalt for the customer. The Company continues to develop products and initiatives to reduce the amount of oil and related products required to produce asphalt mix. Oil price volatility makes it difficult to predict the costs of oil-based products used in road construction such as liquid asphalt and gasoline. Oil prices in 2014 were stable throughout the first half of the year and fell for the last half of the year. Minor fluctuations in oil prices should not have a significant impact on customers' buying decisions. Other factors such as political uncertainty in oil producing countries, interruptions in oil production due to disasters, whether natural or man-made, or other economic factors could significantly impact oil prices which could negatively impact demand for the Company's products. However, the Company believes the lack of confidence surrounding the approval of a long-term federal highway bill has a greater potential to impact the buying decisions of the Company's customers than does the fluctuation of oil prices in 2015.

Contrary to the impact of oil prices and federal funding concerns on many of the Company's Infrastructure Group products as discussed above, the products manufactured by the Energy Group, which are used in drilling for oil and natural gas, in heaters for refineries and oil sands, and in double fluid pump trailers for fracking and oil and gas extraction, would benefit from higher oil and natural gas prices, to the extent that such higher prices lead to increased development in the oil and natural gas production industries. The Company believes further development of domestic oil and natural gas production capabilities is needed and would positively impact the domestic economy and the Company's business.
A-6



Steel is a major component in the Company's equipment. Moderate decreases in steel price occurred during the fourth quarter of 2014. Steel prices have stabilized in the first quarter of 2015 with moderate demand and relatively short mill lead times for most products. The Company expects steel prices to remain near current levels in the short-term unless there is significant demand increases due to growth in the broader economy. It is uncertain, however, if these trends will continue throughout the remainder of 2015. The Company continues to utilize forward-looking contracts coupled with advanced steel purchases to minimize the impact of fluctuations in steel prices. The Company will continue to review the trends in steel prices in future months and establish future contract pricing accordingly.

In addition to the factors stated above, many of the Company's markets are highly competitive, and its products compete worldwide with a number of other manufacturers and dealers that produce and sell similar products. During 2010 through mid-2012, a weak dollar, combined with improving economic conditions in certain foreign economies, had a positive impact on the Company's international sales. In 2013 and 2014, the dollar strengthened against many foreign currencies which had a negative effect on pricing in certain foreign markets the Company serves. The Company expects the dollar to remain strong against most foreign currencies in the near term. Increasing domestic interest rates or weakening economic conditions abroad could cause the dollar to continue to strengthen, which could negatively impact the Company's international sales.

In the United States and internationally, the Company's equipment is marketed directly to customers as well as through dealers. During 2014, approximately 75% to 80% of equipment sold by the Company was sold directly to the end user. The Company expects this ratio to remain relatively consistent through 2015.

The Company is operated on a decentralized basis with a complete management team for each operating subsidiary. Finance, insurance, legal, shareholder relations, corporate accounting and other corporate matters are primarily handled at the corporate level (i.e., Astec Industries, Inc., the parent company). The engineering, design, sales, manufacturing and basic accounting functions are all handled at each individual subsidiary. Standard accounting procedures are prescribed and followed in all reporting.

The non-union employees of each subsidiary have the opportunity to earn profit-sharing incentives in the aggregate of up to 10% of each subsidiary's after-tax profit if the subsidiary meets established goals. These goals are based on the subsidiary's return on capital employed, cash flow on capital employed and safety. The profit-sharing incentives for subsidiary presidents and corporate officers are normally paid from a separate formula-driven pool based on the same key performance indicators used in the employee incentive plan.

Results of Operations: 2014 vs. 2013
Net Sales
Net sales increased $42,597 or 4.6% to $975,595 in 2014 from $932,998 in 2013. Sales are generated primarily from new equipment purchases made by customers for use in construction for privately funded infrastructure and public sector spending on infrastructure as well as equipment for the aggregate, mining, quarrying and recycling markets and for the oil and gas and geothermal industries. 2014 sales include $23,781 sales of Telestack Limited, located in Northern Ireland, which was acquired in April 2014.

Domestic sales for 2014 were $654,231 or 67.1% of consolidated net sales compared to $599,054 or 64.2% of consolidated net sales for 2013, an increase of $55,180 or 9.2%. The overall increase in domestic sales for 2014 compared to 2013 reflects the strengthening economic conditions for the Company's products in the domestic market.
International sales for 2014 were $321,364 or 32.9% of consolidated net sales compared to $333,944 or 35.8% of consolidated net sales for 2013, a decrease of $12,580 or 3.8%. International sales decreased due to the economic uncertainties and political unrest in several countries in which the Company markets its products as well as a strengthening U.S. dollar against many foreign currencies. The Company continues its efforts to grow its international business by increasing its presence in the markets it serves.
Parts sales as a percentage of consolidated net sales decreased 40 basis points to 26.1% in 2014 from 26.5% in 2013. In dollars, parts sales increased 3.2% to $254,747 in 2014 from $246,905 in 2013.
Gross Profit
Consolidated gross profit as a percentage of sales remained relatively flat at 22.1% in 2014 vs. 22.2% in 2013.  In dollars, gross profit increased 4.0% to $215,316 in 2014 from $207,119 in 2013.
A-7



Selling, General and Administrative Expense
Selling, general and administrative expenses for 2014 were $141,490 or 14.5% of net sales compared to $133,337 or 14.3% of net sales for 2013, an increase of $8,153 or 6.1%. The increase in selling, general and administrative expense was due to an increase in expense related to the ConExpo Show of $3,451 and an increase in payroll and related expense of $3,974 from 2013.
Research and Development
Research and development expenses increased $4,029 or 22.3% to $22,129 in 2014 from $18,100 in 2013. During 2014, the Company increased research and development spending for new products as well as improvements to existing product lines and adaptation of those products to other markets.
Interest Expense
Interest expense in 2014 increased $297 or 70.2%, to $720 from $423 in 2013. The increase in interest expense in 2014 compared to 2013 was primarily related to utilization of credit facilities in Brazil to finance operations of a new manufacturing facility and purchase of related equipment.
Interest Income
Interest income increased $375 or 35.7% to $1,422 in 2014 from $1,047 in 2013. The increase was primarily due to interest received related to the Company's financing of a customer's purchase of the first wood pellet processing plant produced by the Company.
Other Income (Expense), Net
Other income (expense), net was $1,207 in 2014 compared to $1,937 in 2013, a decrease of $730 or 37.7% due to a decrease in investment income as a result of the Company using its short-term investments to fund the acquisition of Telestack Limited in April 2014.
Income Tax
Income tax expense on continuing operations for 2014 was $19,400, compared to $19,028 for 2013. The effective tax rates for 2014 and 2013 were 36.2% and 32.7%, respectively. The effective tax rate increase for 2014 over the effective rate in 2013 was due to an increase in state income tax as well as an increase in valuation allowances, other permanent differences and a decrease in research and development tax credits.
Net Income Attributable To Controlling Interest
The Company had net income attributable to controlling interest of $34,458 in 2014 compared to $39,042 in 2013 a decrease of $4,584, or 11.7%. Earnings per diluted share decreased $0.20 to $1.49 in 2014 from $1.69 in 2013. Weighted average diluted shares outstanding for the years ended December 31, 2014 and 2013 were 23,105 and 23,081, respectively. The increase in shares outstanding is primarily due to the granting of restricted stock units.

Backlog
The backlog of orders at December 31, 2014 was $332,051 compared to $298,193 at December 31, 2013, an increase of $33,858, or 11.4%. The backlog for 2013 has been adjusted to reflect the addition of Telestack Limited to the Company in 2014.  The increase in the backlog of orders was due to an increase in domestic backlog of $21,731 or 10.8% and an increase in international backlog of $12,127 or 12.4%. The Infrastructure Group backlog increased $10,070 or 7.3% from 2013. Included in the Infrastructure Group backlog is $59,275 for a three-line pellet plant order for one customer. The backlog at December 31, 2013 included $20,800 for the first line of the order. Without this order, the Infrastructure backlog would have decreased $28,404 or 24.4% from 2013. The decrease in backlog is attributed to customers' uncertainty around long-term federal highway funding. The Energy Group backlog increased $46,972 or 97.7% from 2013 due in part to the receipt of a large order in late 2014 for an international customer. The Aggregate and Mining Group backlog decreased $23,184 or 20.5% from 2013 due in part to a custom order received in late 2013 for a large crushing, screening and wash plant for a domestic customer.  The Company is unable to determine whether the increase in backlogs was experienced by the industry as a whole.

Net Sales by Segment

   
2014
   
2013
   
$ Change
   
% Change
 
Infrastructure Group
 
$
386,356
   
$
398,399
   
$
(12,043
)
   
(3.0
%)
Aggregate and Mining Group
   
384,883
     
350,514
     
34,369
     
9.8
%
Energy Group
   
204,356
     
184,085
     
20,271
     
11.0
%

A-8



Infrastructure Group: Sales in this group decreased to $386,356 in 2014 compared to $398,399 in 2013, a decrease of $12,043 or 3.0%. Domestic sales for the Infrastructure Group decreased 1.5% in 2014 compared to 2013 primarily due to customers' uncertainty around long-term federal highway funding. International sales for the Infrastructure Group decreased 6.9% in 2014 compared to 2013. The decrease in international sales was due primarily to the strengthening of the U.S dollar in 2014 and political unrest in certain countries. The decrease in international sales for the Infrastructure Group occurred mainly in Australia and the Post-Soviet States. Parts sales for the Infrastructure Group increased 10.0% in 2014 compared to 2013. The Company believes the increase in parts sales from 2013 to 2014 was due in part to customers' decisions to repair existing equipment instead of purchasing new equipment in response to the lack of a long-term federal highway bill.  The Company also believes a portion of the increase in parts sales was attributed to sales of replacement parts for our competitors' equipment.

Aggregate and Mining Group: Sales in this group were $384,883 in 2014 compared to $350,514 in 2013, an increase of $34,369 or 9.8%. Domestic sales for the Aggregate and Mining Group increased 20.0% in 2014 compared to 2013 primarily due to improving economic conditions and improved demand related to infrastructure, particularly in the oil and gas producing regions of the country. International sales for the Aggregate and Mining Group decreased 0.9% in 2014 compared to 2013. The decrease in international sales for the Aggregate and Mining Group would have been 14.8% without the acquisition of Telestack Limited in April 2014. The decrease in international sales occurred primarily in Canada, Africa and Mexico. Parts sales for the Aggregate and Mining Group decreased 2.3% in 2014 compared to 2013.

Energy Group: Sales in this group were $204,356 in 2014 compared to $184,085 in 2013, an increase of $20,271 or 11.0%. Domestic sales for the Energy Group increased 18.0% in 2014 compared to 2013 primarily due to the rebound of the construction, recycling and biomass energy markets as well as the improved market for energy related processing equipment. International sales for the Energy Group decreased 6.6% in 2014 compared to 2013. The decrease in international sales was due primarily to the strengthening of the U.S dollar in 2014 and political unrest in certain countries. The decrease in international sales occurred in the Post-Soviet States and Africa. Parts sales for the Energy Group increased 1.7% in 2014 due to the increase in sales to the wood grinding market.

Segment Profit (Loss)
   
2014
   
2013
   
$ Change
   
% Change
 
Infrastructure Group
 
$
29,477
   
$
32,814
   
$
(3,337
)
   
(10.2
%)
Aggregate and Mining Group
   
32,900
     
33,031
     
(131
)
   
(0.4
%)
Energy Group
   
10,316
     
4,005
     
6,311
     
157.6
%
Corporate
   
(35,270
)
   
(30,367
)
   
(4,903
)
   
(16.1
%)

Infrastructure Group: Profit for this group was $29,477 for 2014 compared to $32,814 for 2013, a decrease of $3,337 or 10.2%. This group's profits were negatively impacted by a decrease of $2,170 in gross profit as a result of a decrease in sales of $12,043, and an increase in ConExpo-related expenses of $1,633.

Aggregate and Mining Group: Profit for this group was $32,900 in 2014 compared to $33,031 in 2013, a decrease of $131 or 0.4%. This group's profits were favorably impacted by an increase of $4,129 in gross profit for 2014 as a result of the $34,369 increase in sales from 2013 offset by increased expenses including amortization expense due to acquisition accounting of $1,785 and ConExpo expense of $1,218.

Energy Group: Profit for this group was $10,316 in 2014 compared to profit of $4,005 in 2013, an increase of $6,311 or 157.6%. This group's profits were favorably impacted by an increase of $9,044 or 26.7% in gross profit during 2014 driven by an increase in sales of $20,271 from 2013 and an increase in gross margins from 18.4% in 2013 to 21.0% in 2014 offset by increases in ConExpo expense of $622 and other selling expenses of $1,792.

Corporate: Net corporate expenses were $35,270 in 2014 as compared to $30,307 in 2013, an increase of $4,903, due to increased U.S. federal income taxes and increased payroll costs associated with the January 1, 2014 restructuring of the Company's upper management. Additionally, other income included in this category also declined significantly due to reduced investment income.
A-9



Results of Operations: 2013 vs. 2012
Net Sales
Net sales decreased $3,275 or 0.3%, from $936,273 in 2012 to $932,998 in 2013. Sales are generated primarily from new equipment purchases made by customers for use in construction for privately funded infrastructure and public sector spending on infrastructure as well as equipment for the aggregate, mining, quarrying and recycling markets and the oil and gas and geothermal industries.

Domestic sales for 2013 were $599,054 or 64.2% of consolidated net sales compared to $572,522 or 61.1% of consolidated net sales for 2012, an increase of $26,532 or 4.6%. The overall increase in domestic sales for 2013 compared to 2012 reflects the strengthening economic conditions for the Company's products in the domestic market.
International sales for 2013 were $333,944 or 35.8% of consolidated net sales compared to $363,751 or 38.9% of consolidated net sales for 2012, a decrease of $29,807 or 8.2%. International sales decreased due to the economic uncertainties in several countries in which the Company markets its products as well as a strengthening U.S. dollar against many foreign currencies. The Company continues its efforts to grow its international business by increasing its presence in the markets it serves.

Parts sales as a percentage of consolidated net sales increased 20 basis points to 26.5% in 2013 from 26.3% in 2012. In dollars, parts sales increased 0.4% to $246,905 in 2013 from $245,851 in 2012.

Gross Profit
Consolidated gross profit as a percentage of sales remained constant at 22.2% in 2013 and 2012.
Selling, General and Administrative Expense
Selling, general and administrative expenses for 2013 were $133,337 or 14.3% of net sales, compared to $136,323 or 14.6% of net sales for 2012, a decrease of $2,986 or 2.2%. In 2013, the Company recorded $799 of expense related to the 2014 ConExpo Show compared to $143 in 2012. The decrease in selling, general and administrative expense from the prior year was primarily due to a decrease in legal and professional expenses of $1,525.
Research and Development
Research and development expenses decreased $2,419 or 11.8% to $18,101 in 2013 from $20,520 in 2012. During 2013 and 2012, the Company invested heavily in research and development across all segments for numerous new equipment offerings which was showcased at the 2014 ConExpo Show.
Interest Expense
Interest expense in 2013 increased $84, or 24.8%, to $423 from $339 in 2012. The increase in interest expense in 2013 compared to 2012 was primarily due to an increase in bank fees related to the Company's line of credit agreement with Wells Fargo.
Interest Income
Interest income decreased $98 or 8.6% to $1,047 in 2013 from $1,145 in 2012.
Other Income (Expense), Net
Other income (expense), net was $1,937 in 2013 compared to $1,783 in 2012, an increase of $154 or 8.6% due to an increase in investment income on a portion of the Company's excess cash invested in mutual funds beginning in 2013.
Income Tax
Income tax expense on continuing operations for 2013 was $19,028, compared to $19,487 for 2012. The effective tax rates for 2013 and 2012 were 32.7% and 36.3%, respectively. The primary reason for the decrease in the effective tax rate from 2012 to 2013 is tax legislation passed in early 2013 that allowed the Company to obtain a tax credit in 2013 based upon amounts expensed for research and development in 2012 in addition to research and development costs incurred in 2013.
Net Income Attributable To Controlling Interest
The Company had net income attributable to controlling interest of $39,042 in 2013 compared to $40,828 in 2012 (which includes $6,779 of income from discontinued operations) for a decrease of $1,786, or 4.4%. Earnings per diluted share decreased $0.08 from $1.77 in 2012 to $1.69 in 2013. Weighted average diluted shares outstanding for the years ended December 31, 2013 and 2012 were 23,081 and 23,051, respectively. The increase in shares outstanding is primarily due to the granting of restricted stock units.
A-10



Backlog
The backlog of orders at December 31, 2013 was $290,242 compared to $263,791 at December 31, 2012, an increase of $26,451, or 10.0%. The increase in the backlog of orders was due to an increase in domestic backlog of $43,880 or 28.0% offset by a decrease in international backlog of $17,429 or 16.3%. The Aggregate and Mining Group backlog increased $16,899 or 19.2% from 2012 to 2013 due in part to an order received in late 2013 for a large crushing, screening and wash plant for a domestic customer. The Infrastructure Group backlog increased $12,910 or 10.4% from 2012. The Energy Group backlog decreased $3,358 or 6.5% from 2012 due to the decreased demand for units in the oil and gas industry in the latter part of 2013. The Company is unable to determine whether the changes in backlogs were experienced by the industry as a whole.

Net Sales by Segment

     
2013
     
2012
   
$ Change
   
% Change
 
Infrastructure Group
 
$
398,399
   
$
390,753
   
$
7,646
     
2.0
%
Aggregate and Mining Group
   
350,514
     
355,428
     
(4,914
)
   
(1.4
%)
Energy Group
   
184,085
     
190,092
     
(6,007
)
   
(3.2
%)

Infrastructure Group: Sales in this group increased to $398,399 in 2013 compared to $390,753 in 2012, an increase of $7,646 or 2.0%. Domestic sales for the Infrastructure Group increased 12.2% in 2013 compared to 2012 due to the strengthening of the U.S. domestic economy. International sales for the Infrastructure Group decreased 17.6% in 2013 compared to 2012 due primarily to the strengthening of the U.S. dollar against many foreign currencies. The decrease in international sales occurred primarily in Canada, Australia, Mexico and India. Parts sales for the Infrastructure Group increased 1.2% in 2013 compared to 2012.

Aggregate and Mining Group: Sales in this group were $350,514 in 2013 compared to $355,428 in 2012, a decrease of $4,914 or 1.4%. Domestic sales for the Aggregate and Mining Group increased 1.9% in 2013 compared to 2012 primarily due to improving economic conditions and improved demand related to infrastructure, particularly in the oil and gas producing regions of the country. International sales for the Aggregate and Mining Group decreased 4.6% in 2013 compared to 2012. The decrease in international sales occurred primarily in Europe, Post-Soviet States, South America, China and Brazil. Parts sales for the Aggregate and Mining Group increased 5.5% in 2013 compared to 2012.

Energy Group: Sales in this group were $184,085 in 2013 compared to $190,092 in 2012, a decrease of $6,007 or 3.2%. Domestic sales for the Energy Group decreased 5.8% in 2013 compared to 2012 due to the sale of the small utility trencher and drill line of products in 2012. International sales for the Energy Group increased 4.2% in 2013 compared to 2012. The increase in international sales occurred in the Post-Soviet States, Canada and Africa, and was primarily related to water well drilling rigs sales. Parts sales for the Energy Group decreased 10.9% in 2013 due to the sale of the small utility trencher and drill line of products in 2012.
Segment Profit (Loss)

   
2013
   
2012
   
$ Change
   
% Change
 
Infrastructure Group
 
$
32,814
   
$
26,916
   
$
5,898
     
21.9
%
Aggregate and Mining Group
   
33,031
     
34,687
     
(1,656
)
   
(4.8
%)
Energy Group
   
4,005
     
6,149
     
(2,144
)
   
(34.9
%)
Corporate
   
(30,367
)
   
(33,023
)
   
2,656
     
8.0
%

Infrastructure Group: Profit for this group was $32,814 for 2013 compared to $26,916 for 2012, an increase of $5,898 or 21.9%. This group's profits were positively impacted by an increase of $6,055 in gross profit compared to 2012 as a result of the $7,646 increase in sales and an increase in gross margin from 20.3% in 2012 to 21.4% in 2013.

Aggregate and Mining Group: Profit for this group was $33,031 in 2013 compared to $34,687 in 2012, a decrease of $1,656 or 4.8%. This group's profits were negatively impacted by a decrease of $2,705 in gross profit during 2013 as a result of a $4,914 decrease in sales offset by a $1,305 reduction in research and development expenses.
A-11


Energy Group: Profit for this group was $4,005 in 2013 compared to profit of $6,149 in 2012, a decrease of $2,144 or 34.9%. This group's profits were negatively impacted by a decrease of $3,290 in gross profit during 2013 as a result of the $6,007 decrease in sales offset by reductions in amortization expense of $796 and bad debt expense of $492.

Corporate: Corporate expenses were $30,367 in 2013 compared to $33,023 in 2012, an improvement of $2,656 or 8.0%. Corporate expenses are significantly impacted by U.S. federal income tax expense, which is recorded at the parent company.

Liquidity and Capital Resources

The Company's primary sources of liquidity and capital resources are its cash on hand, investments, borrowing capacity under a $100,000 revolving credit facility with Wells Fargo Bank, N.A. ("Wells Fargo") and cash flows from operations. The Company had $13,023 (of which $11,632 was held by our foreign subsidiaries) of cash and $1,916 of short-term investments available for operating purposes at December 31, 2014. The Company had no borrowings outstanding under its credit facility with Wells Fargo at December 31, 2014. The Company had outstanding letters of credit of $12,645 and borrowing availability of $87,355 under the credit facility as of December 31, 2014. During 2014, the highest amount of outstanding borrowings at any time under the facility was $16,061.

The Company's South African subsidiary, Osborn Engineered Products SA (Pty) Ltd ("Osborn"), has a credit facility of $8,227 (ZAR 95,000) to finance short-term working capital needs, as well as to cover performance letters of credit, advance payment and retention guarantees. As of December 31, 2014, Osborn had borrowings of $2,814 and $487 in performance, advance payment and retention guarantees outstanding under the facility. The facility is guaranteed by Astec Industries, Inc. The facility's 0.75% unused facility fee is waived if more than 50% of the facility is utilized. As of December 31, 2014, Osborn had available credit under the facility of $4,926. 
 
The Company's Brazilian subsidiary, Astec do Brasil Fabricacao de Equipamentos Ltda. ("Astec Brazil"), has outstanding working capital loans totaling $5,658 at December 31, 2014 from a Brazilian bank with interest rates of approximately 12.5%. The loans have maturity dates ranging from May 2016 to September 2017 and are secured by letters of credit totaling $8,674 issued by Astec Industries, Inc. Additionally, Astec Brazil has various 5-year equipment financing loans outstanding with another Brazilian bank in the aggregate of $2,430 as of December 31, 2014 that have interest rates ranging from 3.5% to 6.0%. These equipment loans have maturity dates ranging from January 2019 to September 2019. Astec Brazil's loans are included in the accompanying balance sheets as short-term debt of $1,027 and long-term debt of $7,061.
A-12



Cash Flows from Operating Activities

   
2014
   
2013
   
Increase /
Decrease
 
Net income
 
$
34,206
   
$
39,214
   
$
(5,008
)
Adjustments:
                       
Depreciation and amortization
   
24,376
     
22,265
     
2,111
 
Provision for warranty
   
12,796
     
12,199
     
597
 
Sale/(purchase) of trading securities, net
   
118
     
(1,350
)
   
1,468
 
Stock based compensation
   
1,200
     
1,461
     
(261
)
Deferred income tax benefits
   
(2,544
)
   
(2,220
)
   
(324
)
Other, net
   
193
     
1,075
     
(882
)
Changes in working capital:
                       
Increase in receivables
   
(6,924
)
   
(8,849
)
   
1,925
 
Increase in inventories
   
(41,933
)
   
(36,561
)
   
(5,372
)
Increase in prepaid expenses
   
(7,189
)
   
(5,433
)
   
(1,756
)
Increase in accounts payable
   
10,755
     
1,028
     
9,727
 
Increase (decrease) in customer deposits
   
5,483
     
(5,436
)
   
10,919
 
Decrease in accrued product warranties
   
(15,563
)
   
(10,163
)
   
(5,400
)
Increase in other accrued liabilities
   
3,289
     
1,085
     
2,204
 
Other, net
   
600
     
(2,454
)
   
3,054
 
Net cash provided by operating activities
 
$
18,863
   
$
5,861
   
$
13,002
 

Net cash provided by operating activities increased $13,002 in 2014 compared to 2013. The primary reasons for the increase in operating cash flows relate to increases in customer deposits and accounts payable.

Cash Flows from Investing Activities

   
2014
   
2013
   
Increase /
Decrease
 
Expenditures for property and equipment
 
$
(24,851
)
 
$
(27,673
)
 
$
2,822
 
Business acquisition, net of cash acquired
   
(34,965
)
   
--
     
(34,965
)
Sale (purchase) of short-term investments
   
16,249
     
(15,000
)
   
31,249
 
Other
   
743
     
424
     
319
 
Net cash used by investing activities
 
$
(42,824
)
 
$
(42,249
)
 
$
(575
)

Investing activities used cash of $42,824 in 2014 compared to $42,249 in 2013. The change is primarily due to a business acquisition of $34,965 in 2014 and the change in short-term investments from 2013 of $31,249.

Cash Flows from Financing Activities

   
2014
   
2013
   
Increase /
Decrease
 
Payment of dividends
 
$
(9,167
)
 
$
(6,856
)
 
$
(2,311
)
Debt borrowings
   
10,462
     
--
     
10,462
 
Other, net
   
1,145
     
270
     
875
 
Net cash provided (used) by financing activities
 
$
2,440
   
$
(6,586
)
 
$
9,026
 

A-13



Financing activities provided cash of $2,440 in 2014 and used cash of $6,586 in 2013 for an increase of $9,026. The change is due primarily to debt incurred by the Company's Brazilian and South African subsidiaries offset by the payment of $0.10 per share dividends paid quarterly beginning in the second quarter of 2013.

Capital expenditures for 2015 are forecasted to total $30,236. The Company expects to finance these expenditures using currently available cash balances, internally generated funds and available credit under the Company's credit facility as well as local financing for the equipment in the new Brazilian manufacturing facility. Capital expenditures are generally for machinery, equipment and facilities used by the Company in the production of its various products.

Financial Condition

The Company's current assets increased to $553,191 at December 31, 2014 from $522,411 at December 31, 2013, an increase of $30,780. The increase from 2013 is due to increases of $45,522 in inventory and $13,688 in accounts receivable offset by a reduction in cash and investments of $37,801. The decrease in cash and investments is due to the acquisition of Telestack Limited on April 1, 2014.  The increase in accounts receivable is due primarily to the increase in sales of the Energy Group from 2013.  The increase in inventory occurred primarily in the Infrastructure Group and is due in part to the increase of equipment built for stock for quick delivery and an addition to inventory produced for the Company's first pellet plant order.  As the Company is financing this sale of the pellet plant, the equipment will remain in the Company's inventory and revenue recognition on the plant sale will not occur until customer payments are received under the related loan arrangements.

The Company's current liabilities increased to $161,129 at December 31, 2014 from $133,531 at December 31, 2013, an increase of $27,598. The increase is primarily attributable to increases in accounts payable of $15,142, customer deposits of $7,588 and short-term debt of $3,807. The increase in accounts payable is attributable to all segments and is due to purchases of inventory to fill the increase in backlog of $33,858 at December 2014. The increase in customer deposits is for amounts received on orders in the Company's backlog. The increase in short-term debt is in the Aggregate and Mining Group and is due to amounts borrowed in Brazil and South Africa to finance operations in those countries.

Market Risk and Risk Management Policies

The Company is exposed to changes in interest rates, primarily from its revolving credit agreements. A hypothetical 100 basis point adverse move (increase) in interest rates would not have materially affected interest expense for the years ended December 31, 2014 and 2013, due to minimal borrowings during the periods. The Company does not hedge variable interest.

The Company is subject to foreign exchange risk at its foreign operations. Foreign operations represent 19.3% and 14.9% of total assets at December 31, 2014 and 2013, respectively, and 12.4% and 14.3% of total revenue for the years ended December 31, 2014 and 2013, respectively. Each period the balance sheets and related results of operations of the Company's foreign subsidiaries are translated from their functional foreign currency into U.S. dollars for reporting purposes. As the dollar strengthens against those foreign currencies, the foreign denominated net assets and operating results become less valuable in the Company's reporting currency. When the dollar weakens against those currencies, the foreign denominated net assets and operating results become more valuable in the Company's reporting currency. At each reporting date, the fluctuation in the value of the net assets and operating results due to foreign exchange rate changes is recorded as an adjustment to other comprehensive income in equity. The Company views its investments in foreign subsidiaries as long-term and does not hedge the net investments in foreign subsidiaries.

From time to time the Company's foreign subsidiaries enter into transactions not denominated in their functional currency. In these situations, the Company evaluates the need to hedge those transactions against foreign currency rate fluctuations. When the Company determines a need to hedge a transaction, the subsidiary enters into a foreign currency exchange contract. The Company does not apply hedge accounting to these contracts and, therefore, recognizes the fair value of these contracts in the consolidated balance sheets and the change in the fair value of the contracts in current earnings.
A-14



Due to the limited exposure to foreign exchange rate risk, a 10% fluctuation in the foreign exchange rates at December 31, 2014 or 2013 would not have a material impact on the Company's consolidated financial statements.

Contractual Obligations

Contractual obligations and the period in which payments are due as of December 31, 2014 are as follows:

   
Payments Due by Period
 
 
Contractual Obligations
 
Total
   
Less Than
1 Year
   
1 to 3 Years
   
3 to 5 Years
   
More Than
5 Years
 
Operating lease obligations
 
$
3,298
   
$
1,463
   
$
1,810
   
$
25
   
$
--
 
Inventory purchase obligations
   
2,045
     
1,765
     
280
     
--
     
--
 
Total
 
$
5,343
   
$
3,228
   
$
2,090
   
$
25
   
$
--
 

The above table excludes the Company's liability for unrecognized tax benefits, which totaled $2,585 at December 31, 2014, since the timing of cash settlements to the respective taxing authorities cannot be reliably predicted.
In 2014, the Company made contributions of approximately $338 to its pension plan, compared to $811 in 2013. The Company has no planned contributions to the pension plan in 2015. The Company's funding policy is to make the minimum annual contributions required by applicable regulations.

Contingencies

Management has reviewed all claims and lawsuits and has made adequate provision for any losses that can be reasonably estimated. Based upon currently available information and with the advice of counsel, management believes that the ultimate outcome of its current claims and legal proceedings, individually and in the aggregate, will not have a material adverse effect on the Company's financial position, cash flows or results of operations. However, claims and legal proceedings are subject to inherent uncertainties and rulings unfavorable to the Company could occur. If an unfavorable ruling were to occur, there exists the possibility of a material adverse effect on the Company's financial position, cash flows or results of operations.

Certain customers have financed purchases of the Company's products through arrangements in which the Company is contingently liable for customer debt aggregating $2,419 and $693 at December 31, 2014 and 2013, respectively. These obligations have average remaining terms of 1.9 years. The Company has recorded a liability of $101 related to these guarantees at December 31, 2013.

The Company is contingently liable under letters of credit of approximately $13,155, primarily for performance guarantees to customers, banks or insurance carriers.

Off-balance Sheet Arrangements

As of December 31, 2014 the Company does not have off-balance sheet arrangements as defined by Item 303(a)(4) of Regulation S-K.

Environmental Matters

During 2004, the Company received notice from the Environmental Protection Agency that it may be responsible for a portion of the costs incurred in connection with an environmental cleanup in Illinois. The discharge of hazardous materials and associated cleanup relate to activities occurring prior to the Company's acquisition of Barber-Greene in 1986. The Company believes that over 300 other parties have received similar notice. At this time, the Company cannot predict whether the EPA will seek to hold the Company liable for a portion of the cleanup costs or the amount of any such liability. The Company has not recorded a liability with respect to this matter because no estimate of the amount of any such liability can be made at this time.
A-15



Critical Accounting Policies

The Company's consolidated financial statements are prepared in accordance with accounting principles generally accepted in the United States. Application of these principles requires the Company to make estimates and judgments that affect the amounts as reported in the consolidated financial statements. Accounting policies that are critical to aid in understanding and evaluating the results of operations and financial position of the Company include the following:

Inventory Valuation: Inventories are valued at the lower of a first-in first-out cost or market. The most significant component of the Company's inventories is steel. Open market prices, which are subject to volatility, determine the cost of steel for the Company. During periods when open market prices decline, the Company may need to reduce the carrying value of the inventory. In addition, certain items in inventory become obsolete over time, and the Company reduces the carrying value of these items to their net realizable value. These reductions are determined by the Company based on estimates, assumptions and judgments made from the information available at that time. See Note 1, Summary of Significant Accounting Policies, for a detailed description of the process used by the Company to value inventories at the lower of first-in first-out cost or market. The Company does not believe it is reasonably likely that the inventory values will materially change in the near future.

Self-Insurance Reserves: The Company insures the retention portion of workers' compensation claims and general liability claims by way of a captive insurance company, Astec Insurance Company. The objectives of Astec Insurance are to improve control over and reduce retained loss costs; to improve focus on risk reduction with development of a program structure which rewards proactive loss control; and to ensure active management participation in the defense and settlement process for claims.

For general liability claims, the captive is liable for the first $1,000 per occurrence and $2,000 per year in the aggregate. The Company carries general liability, excess liability and umbrella policies for claims in excess of amounts covered by the captive.

For workers' compensation claims, the captive is liable for the first $350 per occurrence and $1,000 per year in the aggregate. The Company utilizes a large national insurance company as third-party administrator for workers' compensation claims and carries insurance coverage for claims liabilities in excess of amounts covered by the captive.

The financial statements of the captive are consolidated into the financial statements of the Company. The short-term and long-term reserves for claims and probable claims related to general liability and workers' compensation under the captive are included in accrued loss reserves and other long-term liabilities, respectively, in the consolidated balance sheets depending on the expected timing of future payments. The undiscounted reserves are actuarially determined based on the Company's evaluation of the type and severity of individual claims and historical information, primarily its own claims experience, along with assumptions about future events. Changes in assumptions, as well as changes in actual experience, could cause these estimates to change in the future. However, the Company does not believe it is reasonably likely that the reserve level will materially change in the near future.

At all but one of the Company's domestic manufacturing subsidiaries, the Company is self-insured for health and prescription claims under its Group Health Insurance Plan. The Company carries reinsurance coverage to limit its exposure for individual health claims above certain limits. Third parties administer health claims and prescription medication claims. The Company maintains a reserve for the self-insured health plan which is included in accrued loss reserves on the Company's consolidated balance sheets. This reserve includes both unpaid claims and an estimate of claims incurred but not reported, based on historical claims and payment experience. Historically the reserves have been sufficient to provide for claims payments. Changes in actual claims experience, or payment patterns, could cause the reserve to change, but the Company does not believe it is reasonably likely that the reserve level will materially change in the near future.

The remaining U.S. subsidiary is covered under a fully insured group health plan. Employees of the Company's foreign subsidiaries are insured under health plans in accordance with their local governmental requirements. No reserves are necessary for these fully insured health plans.
A-16


Product Warranty Reserve: The Company accrues for the estimated cost of product warranties at the time revenue is recognized. Warranty obligations by product line or model are evaluated based on historical warranty claims experience. For machines, the Company's standard product warranty terms generally include post-sales support and repairs of products at no additional charge for periods ranging from three months to two years or up to a specified number of hours of operation. For parts from component suppliers, the Company relies on the original manufacturer's warranty that accompanies those parts. Generally, fabricated parts are not covered by specific warranty terms. Although failure of fabricated parts due to material or workmanship is rare, if it occurs, the Company's policy is to replace fabricated parts at no additional charge.

The Company engages in extensive product quality programs and processes, including actively monitoring and evaluating the quality of component suppliers. Estimated warranty obligations are based upon warranty terms, product failure rates, repair costs and current period machine shipments. If actual product failure rates, repair costs, service delivery costs or post-sales support costs differ from estimates, revisions to the estimated warranty liability would be required. The Company does not believe it is reasonably likely that the warranty reserve will materially change in the near future.

Revenue Recognition: Revenue is generally recognized on sales at the point in time when persuasive evidence of an arrangement exists, the price is fixed or determinable, the product has been delivered or services have been rendered and there is reasonable assurance of collection of the sales proceeds. The Company generally obtains purchase authorizations from its customers for a specified amount of product at a specified price with specified delivery terms. A significant portion of the Company's equipment sales represents equipment produced in the Company's plants under short-term contracts for a specific customer project or equipment designed to meet a customer's specific requirements. Most of the equipment sold by the Company is based on standard configurations, some of which are modified to meet customer needs or specifications. The Company provides customers with technical design and performance specifications and performs pre-shipment testing to ensure the equipment performs according to design specifications, regardless of whether the Company provides installation services in addition to selling the equipment.

Certain contracts include terms and conditions through which the Company recognizes revenues upon completion of equipment production, which is subsequently stored at the Company's plant at the customer's request. Revenue is recorded on such contracts upon the customer's assumption of title and risk of ownership and when collectability is reasonably assured. In addition, there must be a fixed schedule of delivery of the goods consistent with the customer's business practices, the Company must not have retained any specific performance obligations such that the earnings process is not complete and the goods must have been segregated from the Company's inventory prior to revenue recognition.

The Company has certain sales accounted for as multiple-element arrangements, whereby revenue attributable to the sale of a product is recognized when it is shipped, and the revenue attributable to services provided with respect to the product (such as installation services) is recognized when the service is performed. Consideration is allocated to deliverables using the relative selling price method using vendor specific objective evidence, if it exists. Otherwise third-party evidence of selling price or the Company's best estimate of the selling price for the deliverables is used. The Company evaluates sales with multiple deliverable elements (such as an agreement to deliver equipment and related installation services) to determine whether revenue related to individual elements should be recognized separately, or as a combined unit. In addition to the previously mentioned general revenue recognition criteria, the Company only recognizes revenue on individual delivered elements when there is objective and reliable evidence that the delivered element has a determinable value to the customer on a standalone basis and there is no right of return.

Goodwill and Other Intangible Assets: Intangible assets are classified into two categories: (1) intangible assets with definite lives subject to amortization, and (2) goodwill. Intangible assets with definite lives are tested for impairment if conditions exist that indicate the carrying value may not be recoverable. Risk factors that may be considered include an economic downturn in the general economy, a geographic market or the commercial and residential construction industries, a change in the assessment of future operations as well as the cyclical nature of our industry and the customization of the equipment we sell, each of which may cause adverse fluctuations in operating results. Other risk factors considered would be an increase in the price or a decrease in the availability of oil that could reduce the demand for our products in addition to the significant fluctuations in the purchase price of raw materials that could have a negative impact on the cost of production and gross margins as well as others more fully described in the Risk Factors section of our Form 10-K. An impairment charge is recorded when the carrying value of the definite lived intangible asset is not recoverable by the cash flows generated from the use of the asset. Some of the inputs used in the impairment testing are highly subjective and are affected by changes in business factors and other conditions. Changes in any of the inputs could have an effect on future tests and result in impairment charges.
A-17



Goodwill is not amortized but is tested for impairment annually or more frequently if events or circumstances indicate that such intangible assets or goodwill might be impaired. See Note 1, Summary of Significant Accounting Policies, for a detailed description of testing performed by the Company to determine if the recorded value of intangible assets or goodwill has been impaired.

The useful lives of identifiable intangible assets are determined after considering the specific facts and circumstances related to each intangible asset. Factors considered when determining useful lives include the contractual term of any agreement, the history of the asset, the Company's long-term strategy for the use of the asset, any laws or other local regulations which could impact the useful life of the asset, and other economic factors, including competition and specific market conditions. Intangible assets that are deemed to have definite lives are amortized, generally on a straight-line basis, over their useful lives, ranging from 3 to 15 years.

Stock-based Compensation: Beginning in 2006 and again in 2011, the Company implemented five-year plans to award key members of management restricted stock units ("RSUs") each year based upon annual financial performance of the Company and its subsidiaries. Each five-year plan allows up to 700 of newly issued shares of Company stock to be granted to employees. The number of RSUs granted each year is determined based upon the performance of individual subsidiaries and consolidated annual financial performance with additional RSUs available for cumulative five-year results. Generally, each award vests at the end of five years from the date of grant, or at the time a recipient retires after reaching age 65, if earlier. These plans are more fully described in Note 16, Shareholders' Equity, to the consolidated financial statements.

Recent Accounting Pronouncements

In April 2014, the Financial Accounting Standards Board issued Accounting Standards Update No. 2014-08, "Reporting Discontinued Operations and Disclosures of Disposals of Components of an Entity," which raises the previous threshold for disposals to qualify as discontinued operations and requires new disclosures for individually material disposal transactions that do not meet the definition of a discontinued operation.  The standard also allows companies to have significant continuing involvement and continuing cash flows with the discontinued operation.  The standard requires the reclassification of assets and liabilities of a discontinued operation in the balance sheet for all periods presented.  The standard is effective for public entities for annual periods beginning on or after December 15, 2014 and is to be implemented prospectively.  The Company does not expect the adoption of this statement to have a significant impact on the Company's financial position or results of operations.

In May 2014, the Financial Accounting Standards Board issued Accounting Standards Update No. 2014-09, "Revenue from Contracts with Customers," which supersedes existing revenue guidance under U.S. GAAP.  The standard's core principle is that a company will recognize revenue when it transfers promised goods or services to customers in an amount that reflects the consideration to which the company expects to be entitled in exchange for those goods or services.  The implementation of this new standard will require companies to use more judgment and to make more estimates than under current guidance.  The standard is effective for public companies for annual periods beginning after December 15, 2016.  The Company plans to adopt the new standard effective January 1, 2017.  The Company has not yet determined what impact, if any, the adoption of this new standard will have on the Company's financial position or results of operations.
A-18



Forward-Looking Statements

This annual report contains forward-looking statements made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Statements contained anywhere in this Annual Report that are not limited to historical information are considered forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934, including, without limitation, statements regarding:
·
execution of the Company's growth and operation strategy;
·
plans for technological innovation;
·
compliance with covenants in our credit facility;
·
liquidity and capital expenditures;
·
sufficiency of working capital, cash flows and available capacity under the Company's credit facilities;
·
compliance with government regulations;
·
compliance with manufacturing and delivery timetables;
·
forecasting of results;
·
general economic trends and political uncertainty;
·
government funding and growth of highway construction and commercial projects;
·
taxes or usage fees;
·
interest rates;
·
integration of acquisitions;
·
industry trends;
·
pricing, demand and availability of steel, oil and liquid asphalt;
·
development of domestic oil and natural gas production;
·
condition of the economy;
·
strength of the dollar relative to foreign currencies;
·
the success of new product lines;
·
presence in the international marketplace;
·
suitability of our current facilities;
·
future payment of dividends;
·
competition in our business segments;
·
product liability and other claims;
·
protection of proprietary technology;
·
demand for products;
·
future fillings of backlogs;
·
employees;
·
the seasonality of our business;
·
tax assets and reserves for uncertain tax positions;
·
critical accounting policies and the impact of accounting changes;
·
anticipated future operations in our Brazilian operations;
·
our backlog;
·
ability to satisfy contingencies;
·
contributions to retirement plans and plan expenses;
·
reserve levels for self-insured insurance plans and product warranties;
·
construction of new manufacturing facilities;
·
supply of raw materials; and
·
inventory.

These forward-looking statements are based largely on management's expectations, which are subject to a number of known and unknown risks, uncertainties and other factors discussed in this report and in other documents filed by the Company with the Securities and Exchange Commission, which may cause actual results, financial or otherwise, to be materially different from those anticipated, expressed or implied by the forward-looking statements. All forward-looking statements included in this document are based on information available to the Company on the date hereof, and the Company assumes no obligation to update any such forward-looking statements to reflect future events or circumstances. You can identify these statements by forward-looking words such as "expect", "believe", "anticipate", "goal", "plan", "intend", "estimate", "may", "will", "should" and similar expressions.
A-19

In addition to the risks and uncertainties identified elsewhere herein and in other documents filed by us with the Securities and Exchange Commission, the risk factors described in this document under the caption "Risk Factors" should be carefully considered when evaluating our business and future prospects: changes or delays in highway funding; rising interest rates; changes in oil prices; changes in steel prices; changes in the general economy; unexpected capital expenditures and decreases in liquidity; the timing of large contracts; production capacity; general business conditions in the industry; non-compliance with covenants in the Company's credit facilities; demand for the Company's products; and those other factors listed from time to time in the Company's reports filed with the Securities and Exchange Commission.  Certain of the risks, uncertainties and other factors discussed above are more fully described in the section entitled "Risk Factors" in the Company's Annual Report on Form 10-K for the year ended December 31, 2014.

 
A-20

ASTEC INDUSTRIES, INC.
MANAGEMENT'S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING

The management of Astec Industries, Inc. (the "Company") is responsible for establishing and maintaining adequate internal control over financial reporting for the Company. The Company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with U.S. generally accepted accounting principles. The Company's internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of assets of the Company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the Company's assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies and procedures may deteriorate.

Management, under the supervision and with the participation of the Company's principal executive officer and principal financial officer, has evaluated the effectiveness of the Company's internal control over financial reporting as of December 31, 2014. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), Internal Control - Integrated Framework: May 2013.  The scope of management's assessment of the effectiveness of the Company's internal control over financial reporting as of December 31, 2014 excluded the business unit that the Company acquired on April 1, 2014 (Telestack Limited). The total consolidated assets with respect to the excluded business were $44,851,000 as of December 31, 2014, and the total consolidated revenues with respect to the excluded business were $23,781,000 for the year ended December 31, 2014. Management will complete its assessment of the internal controls over financial reporting of these newly acquired operations during the 2015 fiscal year. Based on its assessment, management concluded that, as of December 31, 2014, the Company's internal control over financial reporting was effective.

Ernst & Young LLP, the Company's independent registered public accounting firm, has issued an attestation report on the Company's internal control over financial reporting as of December 31, 2014.
A-21

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
To the Board of Directors and Shareholders
Astec Industries, Inc.

We have audited Astec Industries, Inc. internal control over financial reporting as of December 31, 2014, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework), (the COSO criteria). Astec Industries, Inc. management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management's Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the company's internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

As indicated in the accompanying Management's Report on Internal Control Over Financial Reporting, management's assessment of and conclusion on the effectiveness of internal control over financial reporting did not include the internal controls of Telestack Limited, which is included in the 2014 consolidated financial statements of Astec Industries, Inc. and constituted $44.9 million of total assets as of December 31, 2014 and $23.8 million of revenues for the year then ended. Our audit of internal control over financial reporting of Astec Industries, Inc. also did not include an evaluation of the internal control over financial reporting of Telestack Limited.

In our opinion, Astec Industries, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2014, based on the COSO criteria.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the accompanying consolidated balance sheets of Astec Industries, Inc. as of December 31, 2014 and 2013, and the related consolidated statements of income, comprehensive income, equity and cash flows for each of the three years in the period ended December 31, 2014 of Astec Industries, Inc. and our report dated March 2, 2015 expressed an unqualified opinion thereon.

 
/s/ Ernst & Young LLP
 
Chattanooga, Tennessee
March 2, 2015
A-22

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
To the Board of Directors and Shareholders
Astec Industries, Inc.

We have audited the accompanying consolidated balance sheets of Astec Industries, Inc. as of December 31, 2014 and 2013, and the related consolidated statements of income, comprehensive income, equity and cash flows for each of the three years in the period ended December 31, 2014. These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Astec Industries, Inc. at December 31, 2014 and 2013, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2014, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Astec Industries, Inc.'s internal control over financial reporting as of December 31, 2014, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 Framework) and our report dated March 2, 2015 expressed an unqualified opinion thereon.
    
 
 
/s/ Ernst & Young LLP
 
Chattanooga, Tennessee
March 2, 2015

A-23


CONSOLIDATED BALANCE SHEETS
(in thousands, except per share data)

 
   
December 31
 
Assets
 
2014
   
2013
 
         
Current assets:
       
Cash and cash equivalents
 
$
13,023
   
$
35,564
 
Investments
   
1,916
     
17,176
 
Trade receivables
   
105,743
     
92,055
 
Notes and other receivables
   
1,558
     
2,734
 
Inventories
   
387,835
     
342,313
 
Prepaid expenses
   
21,133
     
13,636
 
Deferred income tax assets
   
14,817
     
14,924
 
Other current assets
   
7,166
     
4,009
 
Total current assets
   
553,191
     
522,411
 
Property and equipment, net
   
187,610
     
184,520
 
Investments
   
11,393
     
12,085
 
Goodwill
   
31,995
     
15,057
 
Intangible assets
   
17,272
     
6,543
 
Notes receivable
   
802
     
6,284
 
Other long-term assets
   
3,202
     
2,391
 
Total assets
 
$
805,465
   
$
749,291
 
                 
Liabilities and Equity
               
                 
Current liabilities:
               
Short-term debt
 
$
3,841
   
$
34
 
Accounts payable
   
60,987
     
45,845
 
Customer deposits
   
45,086
     
37,498
 
Accrued product warranty
   
10,032
     
12,716
 
Accrued payroll and related liabilities
   
17,265
     
16,988
 
Accrued loss reserves
   
3,050
     
3,328
 
Other accrued liabilities
   
20,868
     
17,122
 
Total current liabilities
   
161,129
     
133,531
 
Long-term debt
   
7,061
     
510
 
Deferred income tax liabilities
   
16,836
     
17,455
 
Other long-term liabilities
   
21,087
     
17,284
 
Total liabilities
   
206,113
     
168,780
 
                 
Equity:
               
Preferred stock - authorized 4,000 shares of $1.00 par value; none
issued
   
--
     
--
 
Common stock - authorized 40,000 shares of $.20 par value; issued
and outstanding - 22,930 in 2014 and 22,859 in 2013
   
4,586
     
4,572
 
Additional paid-in capital
   
135,887
     
134,730
 
Accumulated other comprehensive loss
   
(12,915
)
   
(4,894
)
Company shares held by SERP, at cost
   
(2,929
)
   
(2,786
)
Retained earnings
   
470,537
     
445,254
 
Shareholders' equity
   
595,166
     
576,876
 
Non-controlling interest
   
4,186
     
3,635
 
Total equity
   
599,352
     
580,511
 
Total liabilities and equity
 
$
805,465
   
$
749,291
 

See Notes to Consolidated Financial Statements
A-24

CONSOLIDATED STATEMENTS OF INCOME
(in thousands, except per share data)


   
Year Ended December 31
 
   
2014
   
2013
   
2012
 
             
Net sales
 
$
975,595
   
$
932,998
   
$
936,273
 
Cost of sales
   
760,279
     
725,879
     
728,322
 
Gross profit
   
215,316
     
207,119
     
207,951
 
Selling, general and administrative expenses
   
141,490
     
133,337
     
136,323
 
Research and development expenses
   
22,129
     
18,101
     
20,520
 
Income from operations
   
51,697
     
55,681
     
51,108
 
Other income:
                       
Interest expense
   
720
     
423
     
339
 
Interest income
   
1,422
     
1,047
     
1,145
 
Other income (expense), net
   
1,207
     
1,937
     
1,783
 
Income from continuing operations before income
 taxes
   
53,606
     
58,242
     
53,697
 
Income taxes on continuing operations
   
19,400
     
19,028
     
19,487
 
Net income from continuing operations
   
34,206
     
39,214
     
34,210
 
Discontinued operations:
                       
Income from discontinued operations, net of tax
   
--
     
--
     
3,401
 
Gain on sale of subsidiary, net of tax
   
--
     
--
     
3,378
 
Income from discontinued operations
   
--
     
--
     
6,779
 
Net income
   
34,206
     
39,214
     
40,989
 
Net income (loss) attributable to non-controlling
 interest
   
(252
)
   
172
     
161
 
Net income attributable to controlling interest
 
$
34,458
   
$
39,042
   
$
40,828
 
                         
Earnings per Common Share
                       
Net income attributable to controlling interest from
continuing operations:
                       
Basic
 
$
1.51
   
$
1.72
   
$
1.50
 
Diluted
   
1.49
     
1.69
     
1.48
 
Income from discontinued operations:
                       
Basic
   
--
     
--
     
0.30
 
Diluted
   
--
     
--
     
0.29
 
Net income attributable to controlling interest:
                       
Basic
   
1.51
     
1.72
     
1.80
 
Diluted
   
1.49
     
1.69
     
1.77
 
Weighted average number of common shares
outstanding:
                       
Basic
   
22,819
     
22,749
     
22,680
 
Diluted
   
23,105
     
23,081
     
23,051
 

See Notes to Consolidated Financial Statements
A-25

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME 
    (in thousands)
 

 
   
Year Ended December 31
 
   
2014
   
2013
   
2012
 
             
Net income
 
$
34,206
   
$
39,214
   
$
40,989
 
Other comprehensive income (loss):
                       
Change in unrecognized pension and post-
retirement benefit costs
   
(1,820
)
   
2,742
     
(157
)
Tax (expense) benefit on change in
unrecognized pension and post-retirement
benefit costs
   
699
     
(974
)
   
(10
)
Foreign currency translation adjustments
   
(7,670
)
   
(8,821
)
   
(626
)
Tax benefit on foreign currency translation
adjustments
   
770
     
1,657
     
454
 
Other comprehensive loss
   
(8,021
)
   
(5,396
)
   
(339
)
Comprehensive loss attributable to
non-controlling interest
   
(565
)
   
(236
)
   
(15
)
Comprehensive income attributable to controlling
interest
 
$
26,750
   
$
34,054
   
$
40,665
 

See Notes to Consolidated Financial Statements
A-26

CONSOLIDATED STATEMENTS OF CASH FLOWS
            (in thousands)
 
 
Year Ended December 31
   
2014
   
2013
   
2012
 
Cash Flows from Operating Activities
           
Net income
 
$
34,206
   
$
39,214
   
$
40,989
 
Adjustments to reconcile net income to net cash
provided by operating activities:
                       
Gain on sale of subsidiary
   
--
     
--
     
(5,358
)
Depreciation
   
21,343
     
20,966
     
20,945
 
Amortization
   
3,033
     
1,299
     
2,103
 
Provision for doubtful accounts
   
1,011
     
629
     
759
 
Provision for warranty
   
12,796
     
12,199
     
11,152
 
Deferred compensation provision
   
74
     
601
     
115
 
Deferred income tax provision (benefit)
   
(2,544
)
   
(2,220
)
   
6,223
 
Gain on disposition of fixed assets
   
(306
)
   
(163
)
   
(256
)
Tax expense (benefit) from stock incentive
exercises
   
(586
)
   
8
     
(107
)
Stock-based compensation
   
1,200
     
1,461
     
1,285
 
Sale (purchase) of trading securities, net
   
118
     
(1,350
)
   
(146
)
(Increase) decrease in:
                       
Trade and other receivables
   
(6,924
)
   
(8,849
)
   
7,555
 
Inventories
   
(41,933
)
   
(36,561
)
   
(41,145
)
Prepaid expenses
   
(7,189
)
   
(5,433
)
   
(1,655
)
Other assets
   
(4,763
)
   
(3,215
)
   
(1,566
)
Increase (decrease) in:
                       
Accounts payable
   
10,755
     
1,028
     
(6,425
)
Customer deposits
   
5,483
     
(5,436
)
   
4,918