f10k-123110.htm
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
Form 10-K
ý
|
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
|
For the fiscal year ended December 31, 2010
OR
o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from _________________ to _______________________
Commission file number 001-11595
ASTEC INDUSTRIES, INC.
(Exact name of registrant as specified in its charter)
Tennessee
|
62-0873631
|
(State or other jurisdiction of incorporation or organization)
|
(I.R.S. Employer Identification No.)
|
|
|
1725 Shepherd Road, Chattanooga, Tennessee
|
37421
|
(Address of principal executive offices)
|
(Zip Code)
|
Registrant's telephone number, including area code:
(423) 899-5898
Securities registered pursuant to Section 12(b) of the Act:
(Title of each class)
|
(Name of each exchange on which registered)
|
Common Stock, $0.20 par value
|
NASDAQ National Market
|
Securities registered pursuant to Section 12(g) of the Act:
None
(Title of class)
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act.
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of the registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
Large Accelerated Filer ý
|
Accelerated Filer o
|
Non-accelerated filer o (Do not check if a smaller reporting company)
|
Smaller Reporting Company o
|
|
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).
|
Yes o
|
No ý
|
|
As of June 30, 2010, the aggregate market value of the registrant's voting and non-voting common stock held by non-affiliates of the registrant was approximately $550,886,000 based upon the closing sales price as reported on the National Association of Securities Dealers Automated Quotation System National Market System.
(APPLICABLE ONLY TO CORPORATE REGISTRANTS)
Indicate the number of shares outstanding of each of the registrant's classes of common stock, as of the latest practicable date:
As of February 17, 2011, Common Stock, par value $0.20 - 22,648,522 shares
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the following documents have been incorporated by reference into the Parts of this Annual Report on Form 10-K indicated:
Document
|
|
Form 10-K
|
|
Proxy Statement relating to Annual Meeting of Shareholders to be held on April 28, 2011
|
|
Part III
|
|
|
|
|
|
ASTEC INDUSTRIES, INC.
2010 FORM 10-K ANNUAL REPORT
TABLE OF CONTENTS
PART I
|
|
|
Page
|
|
|
Business
|
|
|
2 |
|
|
Risk Factors
|
|
|
19 |
|
|
Unresolved Staff Comments
|
|
|
24 |
|
|
Properties
|
|
|
24 |
|
|
Legal Proceedings
|
|
|
27 |
|
|
Executive Officers of the Registrant
|
|
|
27 |
|
|
Reserved
|
|
|
30 |
|
|
|
|
|
|
|
PART II
|
|
|
|
|
|
|
Market for Registrant's Common Equity; Related Shareholder Matters and Issuers Purchases of Equity Securities
|
|
|
30 |
|
|
Selected Financial Data
|
|
|
31 |
|
|
Management's Discussion and Analysis of Financial Condition and Results of Operations
|
|
|
31 |
|
|
Quantitative and Qualitative Disclosures About Market Risk
|
|
|
31 |
|
|
Financial Statements and Supplementary Data
|
|
|
31 |
|
|
Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
|
|
|
31 |
|
|
Controls and Procedures
|
|
|
31 |
|
|
Other Information
|
|
|
31 |
|
|
|
|
|
|
|
PART III
|
|
|
|
|
|
|
Directors, Executive Officers and Corporate Governance
|
|
|
32 |
|
|
Executive Compensation
|
|
|
32 |
|
|
Security Ownership of Certain Beneficial Owners and Management and Related Shareholder Matters
|
|
|
32 |
|
|
Certain Relationships and Related Transactions, and Director Independence
|
|
|
32 |
|
|
Principal Accounting Fees and Services
|
|
|
32 |
|
|
|
|
|
|
|
PART IV
|
|
|
|
|
|
|
Exhibits and Financial Statement Schedules
|
|
|
33 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ITEMS 6, 7, 7a, 8, 9a and 15(a)(1), (2) and (3),and 15(b) and 15(c)
|
|
|
A-1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
FORWARD-LOOKING STATEMENTS
This Annual Report on Form 10-K contains forward-looking statements made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Statements contained anywhere in this Annual Report on Form 10-K that are not limited to historical information are considered forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934, including, without limitation, statements regarding:
· execution of the Company’s growth and operation strategy;
· plans for technological innovation;
· compliance with covenants in our credit facility;
· ability to secure adequate or timely replacement of financing to repay our lenders;
· liquidity and capital expenditures;
· sufficiency of working capital, cash flows and available capacity under the Company’s credit facilities;
· compliance with government regulations;
· compliance with manufacturing and delivery timetables;
· forecasting of results;
· general economic trends and political uncertainty;
· government funding and growth of highway construction and commercial projects;
· taxes or usage fees;
· renewal of the federal highway bill which expired September 30, 2009;
· integration of acquisitions;
· financing plans;
· industry trends;
· pricing and availability of oil and liquid asphalt;
· pricing and availability of steel;
· pricing of scrap metal;
· condition of the economy;
· the success of new product lines;
· presence in the international marketplace;
· suitability of our current facilities;
· future payment of dividends;
· competition in our business segments;
· product liability and other claims;
· protection of proprietary technology;
· demand for products;
· future filling of backlogs;
· employees;
· tax assets;
· the impact of account changes;
· the effect of increased international sales on our backlog;
· critical account policies;
· ability to satisfy contingencies;
· contributions to retirement plans;
· supply of raw materials; and
· inventory.
These forward-looking statements are based largely on management's expectations which are subject to a number of known and unknown risks, uncertainties and other factors discussed in this report and in other documents filed by us with the Securities and Exchange Commission, which may cause actual results, financial or otherwise, to be materially different from those anticipated, expressed or implied by the forward-looking statements. All forward-looking statements included in this document are based on information available to us on the date hereof, and we assume no obligation to update any such forward-looking statements to reflect future events or circumstances. You can identify these statements by forward-looking words such as "expect", "believe", “anticipate”, "goal", "plan", "intend", "estimate", "may", "will", “should” and similar expressions.
In addition to the risks and uncertainties identified elsewhere herein and in other documents filed by us with the Securities and Exchange Commission, the risk factors described in this document under the caption "Risk Factors" should be carefully considered when evaluating our business and future prospects.
PART I
General
Astec Industries, Inc. (the "Company") is a Tennessee corporation which was incorporated in 1972. The Company designs, engineers, manufactures and markets equipment and components used primarily in road building, utility and related construction activities as well as other products discussed below. The Company's products are used in each phase of road building, from quarrying and crushing the aggregate to application of the road surface. The Company also manufactures certain equipment and components unrelated to road construction, including trenching, auger boring, directional drilling, gas and oil drilling rigs, industrial heat transfer equipment, whole-tree pulpwood chippers, horizontal grinders and blower trucks. The Company also manufactures a line of multiple use plants for cement treated base, roller compacted concrete and ready-mix concrete. The Company is developing and marketing pelletizing equipment used to compress wood and other products into dense pellets for the renewable energy market among other applications. The Company's subsidiaries hold 97 United States patents and 33 foreign patents with 61 patent applications pending and have been responsible for many technological and engineering innovations in the industry. The Company's products are marketed both domestically and internationally. In addition to equipment sales, the Company manufactures and sells replacement parts for equipment in each of its product lines and replacement parts for some competitors' equipment. The distribution and sale of replacement parts is an integral part of the Company's business.
The Company's fourteen manufacturing subsidiaries are: (i) Breaker Technology Ltd/Inc., which designs, engineers, manufactures and markets rock breaking and processing equipment and utility vehicles for mining and pelletizing equipment; (ii) Johnson Crushers International, Inc., which designs, engineers, manufactures and markets portable and stationary aggregate and ore processing equipment; (iii) Kolberg-Pioneer, Inc., which designs, engineers, manufactures and markets aggregate processing equipment for the crushed stone, manufactured sand, recycle, top soil and remediation markets; (iv) Osborn Engineered Products SA (Pty) Ltd, which designs, engineers, manufactures and markets a complete line of bulk material handling and minerals processing plant and equipment used in the aggregate, mineral mining, metallic mining and recycling industries; (v) Astec Mobile Screens, Inc. which designs, engineers, manufactures and markets mobile screening plants, portable and stationary structures and vibrating screens for the aggregate, recycle and material processing industries; (vi) Telsmith, Inc., which designs, engineers, manufactures and markets aggregate processing and mining equipment for the production and classification of sand, gravel, crushed stone and minerals used in road construction and other applications; (vii) Astec, Inc., which designs, engineers, manufactures and markets hot-mix asphalt plants, concrete mixing plants and related components of each; (viii) CEI Enterprises, Inc., which designs, engineers, manufactures and markets thermal fluid heaters, storage tanks, hot-mix asphalt plants, rubberized asphalt and polymer blending systems; (ix) Heatec, Inc., which designs, engineers, manufactures and markets thermal fluid heaters, process heaters, waste heat recovery equipment, liquid storage systems and polymer and rubber blending systems; (x) American Augers, Inc., which designs, engineers, manufactures and markets large horizontal, directional drills, oil and gas drilling rigs, auger boring machines and the down-hole tooling to support these units; (xi) Astec Underground, Inc., formerly Trencor, Inc., which designs, engineers, manufactures, and markets heavy-duty Trencor trenchers, and a comprehensive line of Astec utility trenchers, vibratory plows, and compact horizontal directional drills and vertical drills for the geo thermal/water well applications; (xii) Carlson Paving Products, Inc., which designs, engineers, manufactures and markets asphalt paver screeds, a commercial paver and a windrow pickup machine; (xiii) Roadtec, Inc., which designs, engineers, manufactures and markets asphalt pavers, material transfer vehicles, milling machines and a line of asphalt reclaiming and soil stabilizing machinery; and (xiv) Peterson Pacific Corp., which designs, engineers, manufactures and markets whole-tree pulpwood chippers, horizontal grinders and blower trucks. The Company also has a subsidiary in Australia, Astec Australia Pty Ltd, that markets and installs equipment, services and provides parts in the region for many of the products produced by the Company’s manufacturing companies.
The Company's strategy is to be the industry's most cost-efficient producer in each of its product lines, while continuing to develop innovative new products and provide first class service for its customers. Management believes that the Company is the technological innovator in the markets in which it operates and is well positioned to capitalize on the need to rebuild and enhance roadway and utility infrastructure, and other areas in which it offers products and services, both in the United States and abroad.
Segment Reporting
The Company's business units have their own decentralized management teams and offer different products and services. The business units have been aggregated into four reportable business segments based upon the nature of the product or services produced, the type of customer for the products, the similarity of economic characteristics, the manner in which management reviews results and the nature of the production process among other considerations. The reportable business segments are (i) Asphalt Group, (ii) Aggregate and Mining Group, (iii) Mobile Asphalt Paving Group and (iv) Underground Group. All remaining companies, including the Company, Astec Insurance Company, Peterson Pacific Corp. and Astec Australia Pty Ltd, as well as U.S. federal income tax expenses for all business segments, are included in the "Other Business Units" category for reporting.
Financial information in connection with the Company's financial reporting for segments of a business and for geographic areas under FASB Accounting Standards Codification (ASC) 280 is included in Note 17, Operations by Industry Segment and Geographic Area, to "Notes to Consolidated Financial Statements” presented in Appendix A of this report.
Asphalt Group
The Asphalt Group segment is made up of three business units: Astec, Inc. ("Astec"), Heatec, Inc. ("Heatec") and CEI Enterprises, Inc. ("CEI"). These business units design, engineer, manufacture and market a complete line of asphalt plants, concrete mixing plants and related components of each, heating and heat transfer processing equipment and storage tanks for the asphalt paving and other non-related industries.
Products
Astec designs, engineers, manufactures and markets a complete line of portable, stationary and relocatable hot-mix asphalt plants and related components under the ASTEC® trademark as well as a new line of concrete mixing plants introduced by Astec, Inc. in 2009. An asphalt mixing plant typically consists of heating and storage equipment for liquid asphalt (manufactured by CEI or Heatec); cold feed bins for blending aggregates; a counter-flow continuous type unit (Astec Double Barrel) for drying, heating and mixing; a baghouse composed of air filters and other pollution control devices; hot storage bins or silos for temporary storage of hot-mix asphalt; and a control house. Astec introduced the concept of high plant portability in 1979. Its current generation of portable asphalt plants is marketed as the Six PackTM and consists of six or more portable components, which can be disassembled, moved to the construction site and reassembled, thereby reducing relocation expenses. High plant portability represents an industry innovation developed and successfully marketed by Astec. Astec's enhanced version of the Six PackTM, known as the Turbo Six PackTM, is a highly portable plant which is especially useful in less populated areas where plants must be moved from job-to-job and can be disassembled and erected without the use of cranes.
Astec developed a Double Barrel Green System (patent pending), which allows the asphalt mix to be prepared and placed at lower temperatures than conventional systems and operates with a substantial reduction in smoke emissions during paving and load-out. Previous technologies for warm mix production rely on expensive additives, procedures and/or special asphalt cement delivery systems that add significant costs to the cost per ton of mix. The Company’s new Astec multi-nozzle device eliminates the need for the expensive additives by mixing a small amount of water and asphalt cement together to create microscopic bubbles that reduces the viscosity of the asphalt mix coating on the rock, thereby allowing the mix to be handled and worked at lower temperatures.
The components in Astec's asphalt mixing plants are fully automated and use both microprocessor-based and programmable logic control systems for efficient operation. The plants are manufactured to meet or exceed federal and state clean air standards. Astec also builds batch type asphalt plants and has developed specialized asphalt recycling equipment for use with its hot-mix asphalt plants.
Astec’s concrete production equipment is designed to be easy to operate and maintain. Materials are managed with continuous blending using belt scales and variable frequency conveyor drives. Shaft-driven mixers with high-torque folding action deliver a uniform concrete mix. Astec’s tower plants are designed in modular configurations for either dry or wet arrangements. Modular components such as aggregate bins, screen decks, discharge chutes and mixer decks are all universally matched and provide an exciting new alternative in vertical stationary concrete plants.
Heatec designs, engineers, manufactures and markets a variety of thermal fluid heaters, process heaters, waste heat recovery equipment, liquid storage systems and polymer and rubber blending systems under the HEATEC® trademark. For the construction industry, Heatec manufactures a complete line of asphalt heating and storage equipment to serve the hot-mix asphalt industry and water heaters for concrete plants. In addition, Heatec builds a wide variety of industrial heaters to fit a broad range of applications, including heating equipment for marine vessels, roofing material plants, refineries, oil sands, energy related processing, chemical processing, rubber plants and the agribusiness. Heatec has the technical staff to custom design heating systems and has systems operating as large as 50,000,000 BTU's per hour.
CEI designs, engineers, manufactures and markets thermal fluid heaters, storage tanks, hot-mix asphalt plants, rubberized asphalt and polymer blending systems under the CEI® trademark. CEI designs and builds heaters with outputs up to 10,000,000 BTU’s per hour and portable, vertical, and stationary storage tanks up to 40,000 gallons in capacity. CEI’s hot-mix plants are built for domestic and international use and employ parallel and counter flow designs with capacities up to 180 tons per hour. CEI is a leading supplier of crumb rubber blending plants in the U.S.
Marketing
Astec markets its hot-mix asphalt products both domestically and internationally. Dillman Equipment, Inc., a manufacturer of asphalt production equipment in Prairie du Chien, Wisconsin was acquired by Astec in October 2008 and now operates as a division of Astec. The Dillman line of equipment is offered to the market as an addition to the Astec product line. The principal purchasers of asphalt and related equipment are highway contractors. Asphalt equipment, including Dillman products, are sold directly to the customers through Astec's domestic and international sales departments, although independent agents are also used to market asphalt plants and their components in international markets.
Heatec and CEI equipment is marketed through both direct sales and dealer sales. Manufacturers' representatives sell heating products for applications in several industries other than the asphalt industry.
In total, the products of the Asphalt Group segment are marketed by approximately 49 direct sales employees, 19 domestic independent distributors and 36 international independent distributors.
Raw Materials
Raw materials used in the manufacture of products include carbon steel and various types of alloy steel, which are normally purchased from distributors. Raw materials for manufacturing are normally readily available. Most steel is delivered on a "just-in-time" arrangement from the supplier to reduce inventory requirements at the manufacturing facilities, but some steel is bought and occasionally inventoried.
Competition
This industry segment faces strong competition in price, service and product performance and competes with both large publicly-held companies with resources significantly greater than those of the Company and with various smaller manufacturers. Domestic hot-mix asphalt plant competitors include Terex Corporation, Gencor Industries, Inc., ADM and Almix. In the international market the hot-mix asphalt plant competitors include Ammann, Parker, Cifali, Speco and local manufacturers. The market for the Company's heat transfer equipment is diverse because of the multiple applications for such equipment. Competitors for the construction product line of heating equipment include, among others, Gencor Industries, Inc., American Heating, Pearson Heating Systems, Reliable Asphalt Products and Meeker. Competitors for the industrial product line of heating equipment include Sigma Thermal, Fulton Thermal Corporation and Vapor Power International, among others.
Employees
At December 31, 2010, the Asphalt Group segment employed 1,028 individuals, of which 737 were engaged in manufacturing, 128 in engineering and 163 in selling, general and administrative functions.
Backlog
The backlog for the Asphalt Group at December 31, 2010 and 2009 was approximately $108,792,000 and $75,591,000, respectively. Management expects all current backlogs to be filled in 2011.
Aggregate and Mining Group
The Company's Aggregate and Mining Group is comprised of six business units focused on the aggregate, metallic mining and recycling markets. These business units achieve their strength by distributing products into niche markets and drawing on the advantages of brand recognition in the global market. These business units are Telsmith, Inc. ("Telsmith"), Kolberg-Pioneer, Inc. ("KPI"), Astec Mobile Screens, Inc. ("AMS"), Johnson Crushers International, Inc. ("JCI"), Breaker Technology Ltd/Breaker Technology Inc. ("BTI") and Osborn Engineered Products, SA (Pty) Ltd ("Osborn").
Products
Founded in 1906, Telsmith is the oldest subsidiary of the group. The primary markets served under the TELSMITH® trade name are the aggregate and metallic mining industries.
Telsmith’s core products are jaw, cone and impact crushers as well as vibrating feeders, inclined and horizontal screens. Telsmith also provides consulting and engineering services to provide complete “turnkey” processing systems. Both portable and modular plant systems are available in production ranges from 300 tph to 1500 tph.
Recent additions to the Telsmith product line include the 44SBS Cone Skid mounted crushing plant. This plant allows the entire crushing plant to be loaded in a shipping container for transportation. The HydraJaw Series of hydraulic clearing jaw crushers was expanded to include the HydraJaw 2238 and HydraJaw H3244 sizes. These jaws incorporate advanced hydraulic systems with PLC controls to enhance the operator’s ability to safely operate and maintain the equipment with lower operating costs.
Telsmith maintains an ISO 9001:2008 certification, an internationally recognized standard of quality assurance. In addition, Telsmith has achieved CE designation (a standard for quality assurance and safety) on its jaw crusher, cone crusher and vibrating screen products marketed into European Union countries.
KPI designs, engineers, manufactures and supports a complete line of aggregate processing equipment for the sand and gravel, mining, quarrying, concrete and asphalt recycling markets under the KPI-JCI product brand name. This equipment, along with the full line of portable and stationary aggregate and ore processing products from JCI and the related screen products from AMS, are all jointly marketed through an extensive network of KPI-JCI and AMS dealers.
KPI products include a complete line of primary, secondary, tertiary and quaternary crushers, including jaw, horizontal shaft impactor, vertical shaft impactor, and roll crushers. KPI rock crushers are used by mining, quarrying and sand and gravel producers to crush oversized aggregate to salable size, in addition to their use for recycled concrete and asphalt. Equipment furnished by KPI can be purchased as individual components, as portable plants for flexibility or as completely engineered systems for both portable and stationary applications. Included in the portable area is the highly-portable Fast Pack® System, featuring quick setup and teardown, thereby maximizing production time and minimizing downtime. Also included in the portable line is the fully self-contained and self-propelled Fast Trax® track-mounted jaw and horizontal shaft crushers in six different models, which are ideal for either recycle or hard rock applications, allowing the producer to move the equipment to the material.
KPI sand classifying and washing equipment is relied upon to clean, separate and re-blend deposits to meet the size specifications for critical applications. KPI products include fine and coarse material washers, log washers, blade mills and sand classifying tanks. Screening plants are available in both stationary and highly portable models, and are complemented by a full line of radial stacking and overland belt conveyors.
KPI conveying equipment is designed to move or store aggregate and other bulk materials in radial cone-shaped or windrow stockpiles. The SuperStacker telescoping conveyor and its Wizard Touch® automated controls are designed to add efficiency and accuracy to whatever the stockpile specifications require.
Recent additions to the KPI product line include the Global Track series, which is designed to offer industry-leading crushing and screening power in portable, compatible and easy-to-use configurations for the global market.
Founded in 1995, JCI is one of the youngest subsidiaries in the Astec family. JCI designs, engineers, manufactures and distributes portable and stationary aggregate and ore processing equipment. This equipment is used in the aggregate, mining and recycle industries. JCI's principal products are cone crushers, three-shaft horizontal screens, portable plants, track-mounted plants and replacement parts for competitive equipment. JCI offers completely re-manufactured cone crushers and screens from its service repair facility.
JCI cone crushers are used primarily in secondary and tertiary crushing applications, and come in both remotely adjusted and manual models. Horizontal screens are low-profile machines for use primarily in portable applications. They are used to separate aggregate materials by sizes. The Combo screen features an inclined feed section with flat discharge section and utilizes the oval stroke impulse mechanism, and offers increased capacity particularly in scalping applications where removal of fines is desired.
Portable plants combine various configurations of cone crushers, horizontal screens, Combo screens, and conveyors mounted on tow-away chassis. Because transportation costs are high, producers use portable equipment to operate nearer to their job sites. Portable plants allow the aggregate producers to quickly and efficiently move their equipment from one location to another. JCI, in conjunction with KPI and AMS, market a portable rock crushing plant appropriately named the Fast Pack®. This complete portable plant is self-erecting with production capability in excess of 500 tons per hour and can be reassembled and ready for production in under four hours, making it one of the industry's most mobile and cost-effective high-capacity crushing systems. The Fast Pack® design reduces operating costs as much as 30%, compared to traditional plant designs, and the user-friendly controls provide a safer work environment for the user. An electric FastPack® system was recently launched featuring a smaller, more portable cone crusher. This smaller electric version of the original highly portable FastPack® system offers most of the economic benefits of a diesel system to a larger target audience.
JCI offers several models of Fast Trax® track-mounted cone crushers and screens. These units are self-contained and easily transported making them well-suited for many rent-to-sell and rent-to-rent opportunities. In 2010, JCI participated along with KPI and AMS in the launch of the Global Track series, an entirely new product family of track-mounted equipment that has been designed and priced to compete in both domestic and international markets. The product series includes both new track cone plants as well as track screening equipment. JCI also launched the new MILO cone crusher PLC controller to meet increasing demand for PLC cone crusher controls. In addition, JCI developed In & Out (I/O) portable cone plants that allow cone crushers to be easily matched with existing screening equipment in the field. In the vibratory screening area, JCI began developing the Cascade family of incline vibrating screens to complement its current line of screening products and broaden its participation in the market.
AMS designs, engineers, manufactures and markets mobile screening plants, portable and stationary screen structures and vibrating screens designed for the recycle, crushed stone, sand and gravel, industrial and general construction industries. These screening plants include the AMS Vari-Vibe and Duo-Vibe high frequency screens and the new multi-frequency screen. The AMS high frequency screens are used for chip sizing, sand removal and sizing recycled asphalt where conventional screens are not ideally suited.
AMS recently expanded the mobile screening plant product line with the introduction of the GT145A and the FT3620 Fold n Go with Feed Bin. Both are available as a double or triple deck screening plant for processing sand and gravel, crushed aggregate and recycled materials and are designed to complement plants manufactured by KPI and JCI. AMS has maintained a strong market presence in the reclaimed asphalt pavement business due in large part to the ProSizer® 2612V and looks to increase its market presence with the introduction of a larger ProSizer® 4200. The new unit will feature a larger horizontal shaft impactor from KPI that will process not only reclaimed asphalt pavement but also concrete and virgin aggregate, allowing the ProSizer® line to expand into new markets. AMS also continued its development of high frequency screen boxes with the focus on increased production and performance in fine screening applications. These products are primarily marketed to the crushed stone, recycle, sand and gravel and general construction industries, but they may also have uses in the industrial sand markets.
BTI has acquired ISO:9001:2008 certification, an internationally recognized standard of quality assurance. BTI designs, engineers, manufactures and markets hydraulic rock breaker systems for the aggregate, mining and recycling industries. BTI also designs, engineers and manufactures a complete line of four-wheel drive articulated utility vehicles for underground mines and quarries. Complementing its DS Series of scaling vehicles is an effective and innovative vibratory pick scaling attachment.
In addition to the quarry and mining industries, BTI designs, engineers, manufactures and markets a complete line of hydraulic breakers, compactors and demolition attachments for the North American construction and demolition markets. In addition to the hydraulic demolition attachments, two mechanical pulverizers are under development. These attachments are designed to fit a variety of equipment including excavators, backhoe loaders, wheel loaders and skid steer loaders.
BTI acquired pelletizing technology from Industrial Mechanical & Integration in 2009. A separate division has been formed within BTI which will manufacture and market pelletizers to a large diversified market. The pelletizer product also opens the door for developing multi-million dollar complete densification plants.
BTI offers an extensive aftermarket sales and service program through a highly qualified and trained dealer network.
Osborn maintains ISO:9000; 14000 and 18000 certifications for quality assurance and designs, engineers, manufactures and markets a complete line of bulk material handling and minerals processing equipment. This equipment is used in the aggregate, mining, metallurgical and recycling industries. Osborn has been a licensee of Telsmith's technology for over 60 years. In addition to Telsmith, Osborn also manufactures under license of American Pulverizer (USA), IFE (Austria) and Mogensen (UK) and has an in-house brand, Hadfields. Osborn also offers the following equipment: double-toggle jaw crushers, rotary breakers, roll crushers, rolling ring crushers, mills, out-of-balance or exciter-driven screens and feeders, conveyors, portable track-mounted or skid mounted crushing and screening plants and a full range of idlers.
Marketing
Aggregate processing and mining equipment is marketed by approximately 86 direct sales employees, 133 domestic independent distributors and 124 international independent distributors. The principal purchasers of aggregate processing equipment include highway and heavy equipment contractors, open mine operators, quarry operators and foreign and domestic governmental agencies.
Raw Materials
Raw materials used in the manufacture of products include carbon steel and various types of alloy steel, which are normally purchased from distributors. Raw materials for manufacturing are normally readily available. BTI purchases hydraulic breakers under a purchasing arrangement with a Korean supplier. The Korean supplier has sufficient capacity to meet the Company's anticipated demand; however, alternative suppliers exist for these components should any supply disruptions occur.
Competition
The Aggregate and Mining Group faces strong competition in price, service and product performance both domestically and internationallyin the Aggregate and Mining equipment segments from competitors including Metso, Sandvik, FL Smidth, Terex Corporation, Rammer, Normet, and Atlas-Copco. In North America, the Aggregate and Mining Group faces strong competition from specialized equipment providers, including Deister; Eagle Crushers, Eagle Iron Works, McLanahan, Superior Industries, McCloskey, and Allied Construction Products.
Employees
At December 31, 2010, the Aggregate and Mining Group segment employed 1,276 individuals, of which 881 were engaged in manufacturing, 112 in engineering and engineering support functions, and 283 in selling, general and administrative functions.
Telsmith has a labor agreement covering approximately 144 manufacturing employees which expires on September 17, 2013. None of Telsmith's other employees are covered by a collective bargaining agreement. Approximately 115 of Osborn's manufacturing employees are members of three national labor unions with agreements that expire on June 30, 2011.
Backlog
At December 31, 2010 and 2009, the backlog for the Aggregate and Mining Group was approximately $81,958,000 and $47,793,000, respectively. Management expects all current backlogs to be filled in 2011.
Mobile Asphalt Paving Group
The Mobile Asphalt Paving Group is comprised of Roadtec, Inc. ("Roadtec") and Carlson Paving Products, Inc. ("Carlson"). Roadtec designs, engineers, manufactures and markets asphalt pavers, material transfer vehicles, milling machines and a line of asphalt reclaiming and soil stabilizing machinery. Carlson designs, engineers and manufactures asphalt paver screeds that attach to the asphalt paver to control the width and depth of the asphalt as it is applied to the roadbed. Carlson also manufactures Windrow pickup machines which transfer hot mix asphalt from the road bed into the paver's hopper and a heavy duty commercial class 8 ft. asphalt paver designed for parking lots, residential and other secondary roads.
Products
Roadtec's Shuttle Buggy® is a mobile, self-propelled material transfer vehicle which allows continuous paving by separating truck unloading from the paving process while remixing the asphalt. A typical asphalt paver must stop paving to permit truck unloading of asphalt mix. By permitting continuous paving, the Shuttle Buggy® allows the asphalt paver to produce a smoother road surface, while reducing the time required to pave the road surface and reducing the number of haul trucks required. As a result of the pavement smoothness achieved with this machine, certain states now require the use of the Shuttle Buggy®. Studies using infrared technology have revealed problems caused by differential cooling of the hot-mix during hauling. The Shuttle Buggy® remixes the material to a uniform temperature and gradation, thus eliminating these problems.
Asphalt pavers are used in the application of hot-mix asphalt to the road surface. Roadtec pavers have been designed to minimize maintenance costs while exceeding road surface smoothness requirements. Roadtec also manufactures a paver model designed for use with the material transfer vehicle described above, which is designed to carry and spray tack coat directly in front of the hot mix asphalt in a single process.
Roadtec manufactures milling machines designed to remove old asphalt from the road surface before new asphalt mix is applied. Roadtec's milling machine lines, for larger jobs, are manufactured with a simplified control system, wide conveyors, direct drives and a wide range of horsepower and cutting capabilities to provide versatility in product application. In addition to its larger half-lane and up highway class milling machines, Roadtec also manufactures a smaller, utility class machine for 2 ft. to 4ft. cutting widths. Additional upgrades and options are available from Roadtec to enhance its products and their capabilities.
Roadtec produces two soil stabilizers at configurations of 540HP and 700HP. These machines double as asphalt reclaiming machines for road rehabilitations in addition to their primary roll of soil stabilizing sub-grades with additives to provide an improved base on which to pave. A third smaller machine, model SX-4, is currently being engineered to address the less than 500HP market as several international markets require a machine with a haul width of less than 2.5 meters.
Carlson's patented screeds are part of the asphalt paving machine that lays asphalt on the roadbed at a desired thickness and width, while smoothing and compacting the surface. Carlson screeds can be configured to fit many types of asphalt paving machines. A Carlson screed uses a hydraulic powered generator to electrify elements that heat a screed plate so that asphalt will not stick to it while paving. The generator is also available to power tools or lights for night paving. Carlson offers options which allow extended paving widths and the addition of a curb on the road edge. Carlson’s CP 90 commercial class 8 ft. paver fills the void between competitors commercial pavers, which tend to be lighter and less robust machines, and Roadtec’s highway class paver line.
Marketing
The Mobile Asphalt Paving Group equipment is marketed both domestically and internationally to highway and heavy equipment contractors, utility contractors and foreign and domestic governmental agencies. Mobile construction equipment and factory authorized machine rebuild services are marketed both directly and through dealers. This segment employs 33 direct sales staff, 43 domestic independent distributors and 29 international independent distributors.
Raw Materials
Raw materials used in the manufacture of products include carbon steel and various types of alloy steel, which are normally purchased from distributors and other sources. Raw materials for manufacturing are normally readily available. Most steel is delivered on a "just-in-time" arrangement from suppliers to reduce inventory requirements at the manufacturing facilities, but some steel is bought and occasionally inventoried. Components used in the manufacturing process include engines, gearboxes, power transmissions and electronic systems.
Competition
The Mobile Asphalt Paving Group faces strong competition in price, service and performance. Paving equipment and screed competitors include Caterpillar Paving Products, Inc., a subsidiary of Caterpillar, Inc., Volvo Construction Equipment, CMI Corporation, a subsidiary of Terex Corporation, Vogele America, a subsidiary of Wirtgen America, Dynapac, a subsidiary of Atlas-Copco and Lee Boy. The segment's milling machine equipment competitors include Wirtgen, CMI, Caterpillar, Bomag, Dynapac and Volvo.
Employees
At December 31, 2010, the Mobile Asphalt Paving Group segment employed 478 individuals, of which 321 were engaged in manufacturing, 37 in engineering and engineering support functions, and 120 in selling, general and administrative functions.
Backlog
The backlog for the Mobile Asphalt Paving Group segment at December 31, 2010 and 2009 was approximately $15,109,000 and $3,609,000, respectively. Management expects all current backlogs to be filled in 2011. This segment typically operates with a smaller backlog in relation to sales than the Company’s other segments as many customers expect immediate delivery due to the types of products being sold and the lead times typically available on competitors’ equipment sold through dealers.
Underground Group
The Underground Group consists of two manufacturing companies, Astec Underground, Inc. ("Astec Underground"), previously named Trencor, Inc., and American Augers, Inc. ("American Augers"). These two business units design, engineer and manufacture a complete line of underground construction equipment and related accessories. Astec Underground produces heavy-duty Trencor trenchers and the Astec line of utility trenchers, vibratory plows, compact horizontal directional drills and vertical drills for geothermal/water well applications. American Augers manufactures maxi drills and auger boring machines, and the down-hole tooling to support these units for the underground construction market. American Augers also manufacturers large vertical drills for the oil and natural gas industry.
Products
Astec Underground produces 8 heavy duty trencher models, 2 vertical drills, 14 utility trencher models and 5 compact horizontal directional drills. In addition to these product models, Astec Underground also produces numerous attachments and tools for the equipment. American Augers manufactures 23 models of trenchless equipment. In addition to these product models, each factory produces numerous attachments and tools for the equipment.
Astec branded products include trenchers and vibratory plows from 13 to 250 horsepower, and horizontal directional drill (HDD) models with pullback ratings from 6,000 to 100,000 pounds. These are sold and serviced through a network of 56 dealers that operate 100 locations worldwide.
Trencor® heavy-duty trenchers are among the most powerful in the world. They have the ability to cut a trench thirty-five feet deep and eight feet wide through solid rock in a single pass. Utilizing a unique mechanical power train, Trencor machines are used to trench pipelines, lay fiber optic cable, cut irrigation ditches, and insert highway drainage materials, among other uses. Astec Underground also makes foundation trenchers that are used in areas where drilling and blasting are prohibited. Astec Underground manufactures a side-cutting rock saw, which permits trenching alongside vertical objects like fences, guardrails, and rock walls in mountainous terrain. The rock saw is used for laying water and gas lines, fiber optic cable, and constructing highway drainage systems, among other uses.
Four Road Miner® models are available with an attachment that allows them to cut a path up to thirteen and a half feet wide and five feet deep on a single pass. The Road Miner® has applications in the road construction industry and in mining and aggregate processing operations.
Astec Underground’s Surface Miner is a maneuverable 1,650-horsepower miner that can cut through rock ten feet wide and up to twenty-six inches deep in a single pass. When equipped with a GPS unit and an automatic grade and slope system, the Surface Miner allows road construction contractors to match the exact specifications of a survey plan.
Astec Underground introduced the EarthPro® Geothermal Drill in 2009. The drill features a heavy-duty mast with a dual rack and pinion drive system. Other features distinguishing this drill from its competitors is an automated rod loading system, a tethered two speed ground drive system and dual multi-function joystick controls. The Earth Pro® offers increased productivity in a drill/trip out application due to its pull up / pull down capacity, three speed drive motors, and the ability to be ran by one operator versus the usual three person operation.
American Augers designs, engineers, manufactures and markets a wide range of trenchless and vertical drilling equipment. Today, American Augers is one of the largest manufacturers of auger boring machines in the world, designing and engineering state of the art boring machines, vertical rigs, directional drills and fluid/mud systems used in the underground construction or trenchless market. The company was the first HDD manufacturer to eliminate chain drive and utilize rack and pinion carriage design which is now the industry standard. The company also has one of the broadest product lines in the industry. It serves global customers in the sewer, power, fiber-optic telecommunication, electric, oil and gas and water industries throughout the world.
In 2010, American Augers introduced the DD-10, a mid-size horizontal directional drill. The DD-10 boasts 100,000 pounds of thrust/pullback, the highest rotary torque in its class (14,000 ft.-lbs) with an optional Quick Disconnect Anchor Plate and 15 ft. Pipe Loader available. In 2010, American Augers also introduced a Rapid Setup Horizontal Direction Drilled referred to as DD-1100RS. This rig, which achieves 1.1 million pounds of thrust/pullback, is designed to assist customers with easier set up and use as the drill pipe staging area reduces manpower and improves speed of adding or removing drill pipe. The DD-1100RS also has an all new Quiet Pack designed to substantially reduce noise levels and a new system designed to reduce fuel consumption when idling.
Marketing
Astec Underground distributes its Trencor® and Earth Pro® brands using a sales force comprised of six domestic and six international sales associates. Astec Underground markets its utility products domestically through a dealer network serviced by five utility and five parts sales associates. American Augers distributes its products through a combination of a direct sales staff and a network of independent dealers. In North America, American Augers has four dedicated direct sales representatives, and the international market is covered by six sales representatives. American Augers is internally staffed with five equipment and parts customer service representatives and one field-parts sales person. This segment employs a total of 30 direct sales staff, 36 domestic independent distributors and 31 international independent distributors.
Raw Materials
Astec Underground and American Augers maintain excellent relationships with suppliers and have experienced minimal turnover. The purchasing group has developed partnering relationships with many of the company's key vendors to improve "just-in-time" delivery and thus lower inventory. Steel is the predominant raw material used to manufacture the products of the Underground Group, and is normally readily available. Components used in the manufacturing process include engines, hydraulic pumps and motors, gearboxes, power transmissions and electronic systems.
Competition
The Underground Group segment faces strong competition in price, service and product performance and competes with both large publically held companies with resources significantly greater than those of the Company and with various smaller manufacturers. Competition for trenching and excavating, equipment includes Charles Machine Works (Ditch Witch), Vermeer, Tesmec and other smaller manufacturers. Competition for the auger boring and vertical and directional drilling and fluid/mud equipment includes Charles Machine Works (Ditch Witch), Vermeer, Atlas-Copco, Schramm, Prime Drilling GmbH, The Robins Company, Herrenknecht, AG and other smaller custom manufacturers.
Employees
At December 31, 2010, the Underground Group segment employed 278 individuals, of which 190 were engaged in manufacturing, 34 in engineering and 54 in selling, general and administrative functions.
Backlog
The backlog for the Underground Group segment at December 31, 2010 and 2009 was approximately $4,843,000 and $1,898,000, respectively. Management expects all current backlogs to be filled in 2011.
Other Business Units
This category consists of the Company's business units that do not meet the requirements for separate disclosure as an operating segment. At December 31, 2010, these other operating units included Peterson Pacific Corp. (“Peterson”), Astec Australia Pty Ltd (“Astec Australia”), Astec Insurance Company and the Company. Peterson designs, engineers, manufactures and distributes whole-tree pulpwood chippers, horizontal grinders and blower trucks. Astec Australia was formed in October 2008 and is the sole distributor of many of the company’s product lines in Australia and New Zealand. Astec Australia sells, installs, services and provides parts support for many of the products produced by the Company’s manufacturing companies. Astec Insurance Company is a captive insurance company.
Products
The primary markets served by Peterson are the wood grinding, chipping and blower truck markets. Peterson produces three models of whole-tree pulpwood chippers ranging from 765 to 1200 horsepower, one flail delimber, two drum chipper models, nine horizontal grinder models, two blower truck models and two self contained blower trailers. A deck screen model is produced for Peterson by JCI. The horizontal grinders range from 475 to 1200 HP.
Peterson introduced the 4310 model track version of its drum chipper in 2010 for the biomass fuel chip market to complement the trailer mount model introduced in 2009. A new 765 HP disc chipper model was also introduced in 2010.
Since its inception, Astec Australia has marketed relocatable and portable asphalt plants and components produced by Astec, Heatec and CEI, asphalt paving equipment and components produced by Roadtec and Carlson as well as trenching equipment produced by Astec Underground. In 2009, Astec Australia added equipment manufactured by the Company’s Aggregate & Mining Group to its product offerings. In addition to selling equipment, Astec Australia also installs, services and provides spare parts support for the equipment it sells and for other equipment its customers carry in their fleets.
Marketing
Peterson markets its machines and spare parts both domestically and internationally in the wood grinding, chipping and blower truck industries. The disc chippers and debarkers primarily serve the pulp and paper industry. The drum chippers primarily serve the biomass energy market. The grinders serve the compost, mulch, biomass energy and construction and demolition recycling markets. Blower trucks and trailers are used primarily in landscape and erosion control markets. The principle purchasers of Peterson products are independent contractors in the markets listed above. Municipal governments are also customers for waste wood grinders. Domestic sales are accomplished through a combination of 17 independent distributors and 9 direct sales and support personnel. Five new domestic distributors were added in 2010. The international market is served with 11 independent distributors plus direct sales to customers in some countries.
Astec Australia continues to enjoy strong partnerships with key large corporate customers but has expanded its customer base by actively marketing products and services to a broader range of customers. Astec Australia plans to focus on growing its existing business operations by identifying areas of competitive advantage. Management believes that these opportunities will have a direct exposure to infrastructure development, particularly in aggregate and mining sectors. The gradual addition of additional Company product lines will allow Astec Australia to access market segments not previously serviced. Management believes that Astec Australia has the organizational structure (sales professionals, construction personnel, service technicians and administrative personnel) and operating systems – which are well established – that will allow the business to continue to grow and expand the number of business locations, sales volume, product offerings and geographical dispersion of equipment sold. Australia and New Zealand are expected to remain the company’s key markets; however, opportunities in other areas of the Pacific Rim and in Southeast Asia will also be pursued. Astec Australia plans to open a new office in western Australia, which will give the company representation on both the east and west coasts of Australia and which is expected to give the company access to Australia’s mining sector, a market that has not been heavily served by the company previously.
Raw Materials
Raw materials used in the manufacture of products include carbon steel and various types of alloy steel, which are normally purchased from distributors and other sources. Raw materials for manufacturing are normally readily available. Most steel is delivered on a "just-in-time" arrangement from the supplier to reduce inventory requirements at the manufacturing facilities, but some steel is bought and occasionally inventoried. Purchased components used in the manufacturing process include engines, gearboxes, power transmissions and electronic control systems.
Competition
Peterson has strong competitors based on product performance, price and service. The principal competitors in North America for high speed grinders are Morbark, Vermeer, Bandit, Diamond Z and CBI, along with other smaller competitors. Internationally, Doppstadt, Jenz and other smaller companies compete in the grinder segment. Mobile chipper competitors include Morbark, Precision, Doppstadt and other smaller companies. The principal competitors in the blower truck business are Finn and Express Blower (a division of Finn).
Astec Australia’s competitors in each product line are typically the same companies that compete with the Company in other locations. Competitors for asphalt plants, mobile asphalt equipment, underground equipment and aggregate and mining equipment are primarily overseas manufacturers who are therefore subject to the same importing issues as Astec Australia. The price impact of competition between European, American and Asian products is dependent primarily on the relationship between the US dollar and the Euro exchange rate as compared to the Australian dollar.
Employees
At December 31, 2010, the Other Business Units segment employed 224 individuals of which 158 were employed by Peterson and 28 were employed by Astec Australia. Peterson has 93 employees engaged in manufacturing, 18 in engineering and 47 in selling and general and administrative functions. Astec Australia has 13 employees engaged in service and installation work and 15 in selling and general and administrative functions. The remaining 38 employees are engaged in general and administrative functions at the parent company.
Backlog
The backlog for the Other Business Units segment, all of which is attributable to Peterson and Astec Australia, at December 31, 2010 and 2009 was approximately $5,925,000 and $6,199,000, respectively. Management expects all current backlogs to be filled in 2011.
Common to All Operating Segments
Although the Company has four reportable business segments, the following information applies to all operating segments of the Company.
Raw Materials
Steel is a major component in the Company’s equipment. In the third quarter and early part of the fourth quarter of 2010, steel prices declined modestly due to soft domestic demand. Near the end of 2010, steel prices began a rapid series of raw material based increases that will likely continue through the first quarter of 2011. It is uncertain, however, if these trends will continue throughout the balance of 2011. Much of the impact of any increased prices in the first quarter of 2011 will be mitigated by our advance purchases of steel and our current steel supply contracts, which allow us to avoid much of the market volatility. The Company will review the trends in steel prices as we progress toward the second half of 2011 and establish future contract pricing accordingly.
Government Regulations
The Company is subject to various laws and governmental regulations concerning environmental matters and employee safety and health in the United States and other countries. The Environmental Protection Agency, OSHA, other federal agencies and certain state agencies have the authority to promulgate regulations that have an effect on the Company’s operations. Many of these federal and state agencies may seek fines and penalties for violations of these laws and regulations. The Company has been able to operate under these laws and regulations without any materially adverse effect on its business.
None of the Company's operating segments operate within highly regulated industries. However, air pollution control equipment manufactured by the Company, principally for hot-mix asphalt plants, must comply with certain performance standards promulgated by the federal Environmental Protection Agency under the Clean Air Act applicable to "new sources" or new plants. Management believes that the Company's products meet all material requirements of such regulations and of applicable state pollution standards and environmental protection laws.
In addition, due to the size and weight of certain equipment the Company manufactures, the Company and its customers may encounter conflicting state regulations on maximum weights transportable on highways. Also, some states have regulations governing the operation of asphalt mixing plants, and most states have regulations relating to the accuracy of weights and measures, which affect some of the control systems manufactured by the Company.
Compliance with these government regulations has no material effect on capital expenditures, earnings, or the Company's competitive position within the market.
Employees
At December 31, 2010, the Company and its subsidiaries employed 3,284 individuals, of which 2,235 were engaged in manufacturing, 329 in engineering, including support staff, and 720 in selling, administrative and management functions.
Other than the Telsmith and Osborn labor agreements described under the Employee subsection of the Aggregate and Mining Group, there are no other collective bargaining agreements applicable to the Company. The Company considers its employee relations to be good.
Manufacturing
The Company manufactures many of the component parts and related equipment for its products, while several large components of their products are purchased "ready-for-use". Such items include engines, axles, tires and hydraulics. In many cases, the Company designs, engineers and manufactures custom component parts and equipment to meet the particular needs of individual customers. Manufacturing operations during 2010 took place at 18 separate locations. The Company's manufacturing operations consist primarily of fabricating steel components and the assembly and testing of its products to ensure that the Company achieves quality control standards.
Seminars and Technical Bulletins
The Company periodically conducts technical and service seminars, which are primarily for dealer representatives, contractors, owners, employees and other users of equipment manufactured by the Company. In 2010, approximately 475 representatives of contractors and owners of hot-mix asphalt plants attended seminars held by the Company in Chattanooga, Tennessee. These seminars, which are taught by Company management and employees, along with select outside speakers and discussion leaders, cover a range of subjects including, but not limited to, technological innovations in the hot-mix asphalt, aggregate processing, paving, milling, and recycling markets.
The Company also sponsors executive seminars for the management of the customers of Astec, Heatec, CEI and Roadtec. Primarily, members of the Company's management conduct the various seminars, but outside speakers and discussion leaders are also utilized.
During 2010, service training seminars were also held at the Roadtec facility for approximately 415 customer representatives and an additional four remote seminars were conducted at other locations throughout the country. Telsmith conducted 3 technical seminars for approximately 83 customer and dealer representatives during 2010 at its facility in Mequon, Wisconsin. Osborn conducted 3 seminars for customers at which 42 customer personnel attended. KPI, JCI and AMS jointly conduct an annual dealer event called NDC (National Dealers Conference). The event offers the entire dealer network a preview of future product, marketing and promotional programs to help dealers operate successful businesses. Along with this event, the companies provide local, regional and national sales and service dealer training programs throughout the year.
Astec Underground hosted sales training for its internal salesmen and international dealers in June 2010. Additional field product training was also hosted at 4 dealer locations during 2010. Approximately 43 people received technical and operational training at these product training events.
In addition to seminars, the Company publishes a number of technical bulletins and information bulletins detailing various technological and business issues relating to the asphalt industry.
Patents and Trademarks
The Company seeks to obtain patents to protect the novel features of its products. The Company's subsidiaries hold 97 United States patents and 33 foreign patents. There are 61 United States and foreign patent applications pending.
The Company and its subsidiaries have approximately 79 trademarks registered in the United States, including logos for American Augers, Astec, Astec Dillman, Astec Underground, Carlson Paving, CEI, Heatec, JCI, Peterson Pacific, Roadtec, Telsmith and Trencor, and the names AMERICAN AUGERS, ASTEC, CARLSON, HEATEC, JCI, KOLBERG PIONEER, PETERSON, ROADTEC, TELSMITH and TRENCOR as well as a number of other product names. The Company also has 46 trademarks registered in foreign countries, including Australia, Brazil, Canada, China, France, Germany, Great Britain, India, Italy, Mexico, South Africa, Thailand, Vietnam and the European Union. The Company and its subsidiaries have 14 United States and foreign trademark applications pending.
Engineering and Product Development
The Company dedicates substantial resources to engineering and product development. At December 31, 2010, the Company and its subsidiaries had 329 full-time individuals employed in engineering and design capacities.
Seasonality and Backlog
Recent years revenues have been strongest during the first half of the year with the second half of the year consistently being weaker. We expect future operations in the near term to be typical of this historical trend. Operations during 2009 and 2010 were significantly impacted by the various economic factors discussed in the MD&A section of this document.following paragraphs.
As of December 31, 2010, the Company had a backlog for delivery of products at certain dates in the future of approximately $216,627,000. At December 31, 2009, the total backlog was approximately $135,090,000. The Company's contracts reflected in the backlog are not, by their terms, subject to termination. Management believes that the Company is in substantial compliance with all manufacturing and delivery timetables.
Competition
Each business segment operates in domestic markets that are highly competitive regarding price, service and product quality. While specific competitors are named within each business segment discussion above, imports do not generally constitute significant competition for the Company in the United States, except for milling machines and track mounted crushers. In international sales efforts, however, the Company generally competes with foreign manufacturers that may have a local presence in the market the Company is attempting to penetrate.
In addition, asphalt and concrete are generally considered competitive products as a surface choice for new roads and highways. A portion of the interstate highway system is paved in concrete, but over 90% of all surfaced roads in the United States are paved with asphalt. Although concrete is used for some new road surfaces, asphalt is used for most resurfacing.
Available Information
The Company’s internet website can be found at www.astecindustries.com. We make available, free of charge on or through our internet website, access to our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after such material is filed with, or furnished to, the Securities and Exchange Commission. Information contained in our website is not part of, and is not incorporated into, this Annual Report on Form 10-K.
Downturns in the general economy or the commercial and residential construction industries may adversely affect our revenues and operating results.
General economic downturns, including downturns in the commercial and residential construction industries, could result in a material decrease in our revenues and operating results. Demand for many of our products, especially in the commercial construction industry, is cyclical. Sales of our products are sensitive to the states of the U.S., foreign and regional economies in general, and in particular, changes in commercial construction spending and government infrastructure spending. In addition, many of our costs are fixed and cannot be quickly reduced in response to decreased demand. The following factors could cause a downturn in the commercial and residential construction industries:
·
|
a decrease in the availability of funds for construction;
|
·
|
declining economy domestically and internationally;
|
·
|
labor disputes in the construction industry causing work stoppages;
|
·
|
rising gas and fuel oil prices;
|
·
|
rising steel prices and steel surcharges;
|
·
|
energy or building materials shortages;
|
·
|
availability of credit for customers.
|
Downturns in the general economy and restrictions in the credit markets may negatively impact our earnings, cash flows and/or financial position and access to financing sources by the Company and our customers.
Worldwide economic conditions and the international credit markets have recently significantly deteriorated and will possibly remain depressed for the foreseeable future. Continued deterioration of economic conditions and credit markets could adversely impact our earnings as sales of our products are sensitive to general declines in U.S. and foreign economies and the ability of our customers to obtain credit. In addition, we rely on the capital markets and the banking markets to meet our financial commitments and short-term liquidity needs if internal funds are not available from our operations. Further disruptions in the capital and credit markets, or further deterioration of our creditors' financial condition could adversely affect the Company's ability to draw on its revolving credit facility. The restrictions in the credit markets could make it more difficult or expensive for us to replace our current credit facility or obtain additional financing.
A decrease or delay in government funding of highway construction and maintenance may cause our revenues and profits to decrease.
Many of our customers depend on government funding of highway construction and maintenance and other infrastructure projects. Any decrease or delay in government funding of highway construction and maintenance and other infrastructure projects could cause our net sales and profits to decrease. Federal government funding of infrastructure projects is usually accomplished through bills that establish funding over a multi-year period, such as the Safe, Accountable, Flexible and Efficient Transportation Equity Act - A Legacy for Users (“SAFETEA-LU”), which provided $286.5 billion to fund federal transit projects from 2004 to 2009. SAFETEA-LU funding expired on September 30, 2009 and federal transportation funding has operated on a number of short-term appropriations since that date. The current legislation funding federal transportation expenditures expires on March 4, 2011, and Congress is working on a number of proposals to continue funding at various levels.
With the current political environment in Washington, the level of funding for federal highway projects is uncertain. Although continued funding is expected, it may be at lower levels than in the past, and Congress may not enact long-term funding acts in the near future. In addition, Congress could pass legislation in future sessions that would allow for the diversion of previously appropriated highway funds for other national purposes, or it could restrict funding of infrastructure projects unless states comply with certain federal policies.
The cyclical nature of our industry and the customization of the equipment we sell may cause adverse fluctuations to our revenues and operating results.
We sell equipment primarily to contractors whose demand for equipment depends greatly upon the volume of road or utility construction projects underway or to be scheduled by both government and private entities. The volume and frequency of road and utility construction projects is cyclical; therefore, demand for many of our products is cyclical. The equipment we sell is durable and typically lasts for several years, which also contributes to the cyclical nature of the demand for our products. As a result, we may experience cyclical fluctuations to our revenues and operating results.
An increase in the price of oil or decrease in the availability of oil could reduce demand for our products. Significant increases in the purchase price of certain raw materials used to manufacture our equipment could have a negative impact on the cost of production and related gross margins.
A significant portion of our revenues relates to the sale of equipment involved in the production, handling, recycling or installation of asphalt mix. Liquid asphalt is a byproduct of the refining of oil, and asphalt prices correlate with the price and availability of oil. An increase in the price of oil or a decrease in the availability of oil would increase the cost of producing asphalt, which would likely decrease demand for asphalt, resulting in decreased demand for many of our products. This would likely cause our revenues and profits to decrease. Rising gasoline, diesel fuel and liquid asphalt prices will also adversely impact the operating and raw material costs of our contractor and aggregate producer customers, and if such customers do not properly adjust their pricing, they could experience reduced profits resulting in possible delays in purchasing capital equipment.
Steel is a major component in the Company’s equipment. Steel prices fluctuate, and steel prices are expected to increase through the first quarter of 2011. Our reliance on third-party suppliers for steel and other raw materials exposes us to volatility in the prices and availability of these materials, and price increases or a decrease in the availability of these raw materials could increase our operating costs and adversely affect our financial results.
Acquisitions that we have made in the past and future acquisitions involve risks that could adversely affect our future financial results.
We have completed several acquisitions in the past, including the acquisition of Peterson in 2007, the acquisition of Dillman and certain of the assets of Q-Pave in 2008 and certain assets and technology of Industrial Mechanical & Integration in 2009. We may acquire additional businesses in the future. We may be unable to achieve the benefits expected to be realized from our acquisitions. In addition, we may incur additional costs and our management's attention may be diverted because of unforeseen expenses, difficulties, complications, delays and other risks inherent in acquiring businesses, including the following:
·
|
we may have difficulty integrating the financial and administrative functions of acquired businesses;
|
·
|
acquisitions may divert management's attention from our existing operations;
|
·
|
fluctuations in exchange rates and a weakening of the dollar may impact the competitiveness of acquired businesses;
|
·
|
we may have difficulty in competing successfully for available acquisition candidates, completing future acquisitions or accurately estimating the financial effect of any businesses we acquire;
|
·
|
we may have delays in realizing the benefits of our strategies for an acquired business;
|
·
|
we may not be able to retain key employees necessary to continue the operations of the acquired business;
|
·
|
acquisition costs may deplete significant cash amounts or may decrease our operating income;
|
·
|
we may choose to acquire a company that is less profitable or has lower profit margins than our company;
|
·
|
future acquired companies may have unknown liabilities that could require us to spend significant amounts of additional capital; and
|
·
|
we may incur domestic or international economic declines that impact our acquired companies.
|
Competition could reduce revenue from our products and services and cause us to lose market share.
We currently face strong competition in product performance, price and service. Some of our domestic and international competitors have greater financial, product development and marketing resources than we have. If competition in our industry intensifies or if our current competitors enhance their products or lower their prices for competing products, we may lose sales or be required to lower the prices we charge for our products. This may reduce revenue from our products and services, lower our gross margins or cause us to lose market share.
Our success depends on key members of our management and other employees.
Dr. J. Don Brock, our Chairman and President, is of significant importance to our business and operations. The loss of his services may adversely affect our business. In addition, our ability to attract and retain qualified engineers, skilled manufacturing personnel and other professionals, either through direct hiring or acquisition of other businesses employing such professionals, will also be an important factor in determining our future success.
Difficulties in managing and expanding in international markets could divert management's attention from our existing operations.
In 2010, international sales represented approximately 38.2% of our total sales. We plan to continue our growth efforts in international markets. In connection with any increase in international sales efforts, we will need to hire, train and retain qualified personnel in countries where language, cultural or regulatory barriers may exist. Any difficulties in expanding our international sales may divert management's attention from our existing operations. In addition, international revenues are subject to the following risks:
·
|
fluctuating currency exchange rates which can reduce the profitability of foreign sales;
|
·
|
the burden of complying with a wide variety of foreign laws and regulations;
|
·
|
dependence on foreign sales agents;
|
·
|
political and economic instability of governments;
|
·
|
the imposition of protective legislation such as import or export barriers; and
|
·
|
fluctuating strengths or weakness of the dollar can impact net sales or the cost of purchased products.
|
We may be unsuccessful in complying with the financial ratio covenants or other provisions of our amended credit agreement.
As of December 31, 2010, we were in compliance with the financial covenants contained in our Credit Agreement, as amended, with Wells Fargo Bank, N.A. However, in the future we may be unable to comply with the financial covenants in our credit facility or to obtain waivers with respect to such financial covenants. If such violations occur, the Company’s creditors could elect to pursue their contractual remedies under the credit facility, including requiring immediate repayment in full of all amounts then outstanding. As of December 31, 2010, the Company had no outstanding borrowings but did have $7,557,000 of letters of credit outstanding under the credit agreement. Additional amounts may be borrowed in the future. The Company’s Osborn and Astec Australia subsidiaries have their own independent loan agreements in place.
Our quarterly operating results are likely to fluctuate, which may decrease our stock price.
Our quarterly revenues, expenses and operating results have varied significantly in the past and are likely to vary significantly from quarter to quarter in the future. As a result, our operating results may fall below the expectations of securities analysts and investors in some quarters, which could result in a decrease in the market price of our common stock. The reasons our quarterly results may fluctuate include:
·
|
general competitive and economic conditions, domestically and internationally;
|
·
|
delays in, or uneven timing in, the delivery of customer orders;
|
·
|
the seasonal trend in our industry;
|
·
|
the introduction of new products by us or our competitors;
|
·
|
product supply shortages; and
|
·
|
reduced demand due to adverse weather conditions.
|
Period-to-period comparisons of such items should not be relied on as indications of future performance.
We may face product liability claims or other liabilities due to the nature of our business. If we are unable to obtain or maintain insurance or if our insurance does not cover liabilities, we may incur significant costs which could reduce our profitability.
We manufacture heavy machinery, which is used by our customers at excavation and construction sites and on high-traffic roads. Any defect in, or improper operation of, our equipment can result in personal injury and death, and damage to or destruction of property, any of which could cause product liability claims to be filed against us. The amount and scope of our insurance coverage may not be adequate to cover all losses or liabilities we may incur in the event of a product liability claim. We may not be able to maintain insurance of the types or at the levels we deem necessary or adequate or at rates we consider reasonable. Any liabilities not covered by insurance could reduce our profitability or have an adverse effect on our financial condition.
If we are unable to protect our proprietary technology from infringement or if our technology infringes technology owned by others, then the demand for our products may decrease or we may be forced to modify our products which could increase our costs.
We hold numerous patents covering technology and applications related to many of our products and systems, and numerous trademarks and trade names registered with the U.S. Patent and Trademark Office and in foreign countries. Our existing or future patents or trademarks may not adequately protect us against infringements, and pending patent or trademark applications may not result in issued patents or trademarks. Our patents, registered trademarks and patent applications, if any, may not be upheld if challenged, and competitors may develop similar or superior methods or products outside the protection of our patents. This could reduce demand for our products and materially decrease our revenues. If our products are deemed to infringe upon the patents or proprietary rights of others, we could be required to modify the design of our products, change the name of our products or obtain a license for the use of some of the technologies used in our products. We may be unable to do any of the foregoing in a timely manner, upon acceptable terms and conditions, or at all, and the failure to do so could cause us to incur additional costs or lose revenues.
If we become subject to increased governmental regulation, we may incur significant costs.
Our hot-mix asphalt plants contain air pollution control equipment that must comply with performance standards promulgated by the Environmental Protection Agency. These performance standards may increase in the future. Changes in these requirements could cause us to undertake costly measures to redesign or modify our equipment or otherwise adversely affect the manufacturing processes of our products. Such changes could have a material adverse effect on our operating results.
Also, due to the size and weight of some of the equipment that we manufacture, we often are required to comply with conflicting state regulations on the maximum weight transportable on highways and roads. In addition, some states regulate the operation of our component equipment, including asphalt mixing plants and soil remediation equipment, and most states regulate the accuracy of weights and measures, which affect some of the control systems we manufacture. We may incur material costs or liabilities in connection with the regulatory requirements applicable to our business.
As an innovative leader in the asphalt and aggregate industries, we occasionally undertake the engineering, design, manufacturing and construction of equipment systems that are new to the market. Estimating the cost of such innovative equipment can be difficult and could result in our realization of significantly reduced or negative margins on such projects.
In the past, we have experienced negative margins on certain large, specialized aggregate systems projects. These large contracts included both existing and innovative equipment designs, on-site construction and minimum production levels. Since it can be difficult to achieve the expected production results during the project design phase, field testing and redesign may be required during project installation, resulting in added cost. In addition, due to any number of unforeseen circumstances, which can include adverse weather conditions, projects can incur extended construction and testing delays which can cause significant cost overruns. We may not be able to sufficiently predict the extent of such unforeseen cost overruns and may experience significant losses on specialized projects.
Our Articles of Incorporation, Bylaws, and Rights Agreement and Tennessee law may inhibit a takeover, which could delay or prevent a transaction in which shareholders might receive a premium over market price for their shares.
Our charter and bylaws and Tennessee law contain provisions that may delay, deter or inhibit a future acquisition or an attempt to obtain control of us. This could occur even if our shareholders are offered an attractive value for their shares or if a substantial number or even a majority of our shareholders believe the takeover is in their best interest. These provisions are intended to encourage any person interested in acquiring us or obtaining control of us to negotiate with and obtain the approval of our Board of Directors in connection with the transaction. Provisions that could delay, deter or inhibit a future acquisition or an attempt to obtain control of us include the following:
·
|
having a staggered Board of Directors;
|
·
|
requiring a two-thirds vote of the total number of shares issued and outstanding to remove directors other than for cause;
|
·
|
requiring advance notice of actions proposed by shareholders for consideration at shareholder meetings;
|
·
|
limiting the right of shareholders to call a special meeting of shareholders;
|
·
|
requiring that all shareholders entitled to vote on an action provide written consent in order for shareholders to act without holding a shareholders’ meeting; and
|
·
|
being governed by the Tennessee Control Share Acquisition Act.
|
In addition, the rights of holders of our common stock will be subject to, and may be adversely affected by, the rights of the holders of our preferred stock that may be issued in the future and that may be senior to the rights of holders of our common stock. In December 2005, our Board of Directors approved an Amended and Restated Shareholder Protection Rights Agreement, which provides for one preferred stock purchase right in respect of each share of our common stock ("Rights Agreement"). These rights become exercisable upon the acquisition by a person or group of affiliated persons, other than an existing 15% shareholder, of 15% or more of our then-outstanding common stock by all persons. This Rights Agreement also could discourage bids for the shares of common stock at a premium and could have a material adverse effect on the market price of our shares.
None.
The location, approximate square footage, acreage occupied and principal function and use by the Company’s reporting segments of the properties owned or leased by the Company are set forth below:
Location
|
Approximate
Square Footage
|
Approximate
Acreage
|
Principal Function (Use by Segment)
|
Chattanooga, Tennessee
|
457,600
|
59
|
Offices, manufacturing and training center – Astec (Asphalt Group)
|
Chattanooga, Tennessee
|
-
|
63
|
Storage yard – Astec (Asphalt Group)
|
Rossville, Georgia
|
40,500
|
3
|
Manufacturing – Astec (Asphalt Group)
|
Prairie du Chien, WI
|
91,500
|
39
|
Manufacturing – Dillman division of Astec (Asphalt Group)
|
Chattanooga, Tennessee
|
84,200
|
5
|
Offices and manufacturing - Heatec (Asphalt Group)
|
Chattanooga, Tennessee
|
207,000
|
15
|
Offices, manufacturing and training center - Roadtec (Mobile Asphalt Paving Group)
|
Chattanooga, Tennessee
|
51,200
|
7
|
Manufacturing - Roadtec (Mobile Asphalt Paving Group)
|
Chattanooga, Tennessee
|
14,100
|
-
|
Leased Hanger and Offices - Astec Industries, Inc. (Other Business Units)
|
Chattanooga, Tennessee
|
10,000
|
2
|
Corporate offices - Astec Industries, Inc. (Other Business Units)
|
Mequon, Wisconsin
|
203,000
|
30
|
Offices and manufacturing - Telsmith (Aggregate and Mining Group)
|
Sterling, Illinois
|
60,000
|
8
|
Offices and manufacturing - AMS (Aggregate and Mining Group)
|
Orlando, Florida
|
9,000
|
-
|
Leased machine repair and service facility - Roadtec (Mobile Asphalt Paving Group)
|
Loudon, Tennessee
|
327,000
|
112
|
Offices and manufacturing – Astec Underground (Underground Group)
|
Eugene, Oregon
|
130,000
|
8
|
Offices and manufacturing – JCI (Aggregate and Mining Group)
|
Albuquerque, New Mexico
|
115,000
|
14
|
Offices and manufacturing – CEI (Asphalt Group) (partially leased to a third party)
|
Yankton, South Dakota
|
312,000
|
50
|
Offices and manufacturing – KPI (Aggregate and Mining Group)
|
Location
|
Approximate
Square Footage
|
Approximate
Acreage
|
Principal Function (Use by Segment)
|
West Salem, Ohio
|
208,000
|
33
|
Offices and manufacturing – American Augers (Underground Group)
|
Thornbury, Ontario, Canada
|
60,500
|
12
|
Offices and manufacturing – BTI (Aggregate and Mining Group)
|
Thornbury, Ontario Canada
|
7,000
|
-
|
Leased warehouse/parts sales office – BTI (Aggregate and Mining Group)
|
Walkerton, Ontario Canada
|
4,500
|
-
|
Leased light manufacturing and sales office – BTI (Aggregate and Mining Group)
|
Riverside, California
|
12,500
|
-
|
Leased offices, sales, assembly and warehouse – BTI (Aggregate and Mining Group)
|
Solon, Ohio
|
8,900
|
-
|
Leased offices, sales, assembly and warehouse – BTI (Aggregate and Mining Group)
|
Tacoma, Washington
|
41,000
|
5
|
Offices and manufacturing – Carlson (Mobile Asphalt Paving Group)
|
Cape Town, South Africa
|
4,600
|
-
|
Leased sales office and warehouse – Osborn (Aggregate and Mining Group)
|
Durban, South Africa
|
3,800
|
-
|
Leased sales office and warehouse – Osborn (Aggregate and Mining Group)
|
Witbank, South Africa
|
1,400
|
-
|
Leased sales office and warehouse – Osborn (Aggregate and Mining Group)
|
Johannesburg, South Africa
|
177,000
|
18
|
Offices and manufacturing – Osborn (Aggregate and Mining Group)
|
Eugene, Oregon
|
130,000
|
7
|
Offices and manufacturing - Peterson Pacific Corp. (Other Business Units)
|
Summer Park, Australia
|
13,500
|
1
|
Leased- Offices, warehousing and storage yard - Astec Australia Pty Ltd (Other Business Units)
|
Salisbury, Australia
|
--
|
1
|
Leased storage, assembly and service yard - Astec Australia Pty Ltd (Other Business Unit)
|
The properties above are owned by the Company unless they are indicated as being leased.
Management believes each of the Company's facilities provides office or manufacturing space suitable for its current needs, and management considers the terms under which it leases facilities to be reasonable.
The Company is currently a party to various claims and legal proceedings that have arisen in the ordinary course of business. If management believes that a loss arising from such claims and legal proceedings is probable and can reasonably be estimated, the Company records the amount of the loss (excluding estimated legal costs), or the minimum estimated liability when the loss is estimated using a range and no point within the range is more probable than another. As management becomes aware of additional information concerning such contingencies, any potential liability related to these matters is assessed and the estimates are revised, if necessary. If management believes that a material loss arising from such claims and legal proceedings is either (i) probable but cannot be reasonably estimated or (ii) reasonably possible but not probable, the Company does not record the amount of the loss, but does make specific disclosure of such matter. Based upon currently available information and with the advice of counsel, management believes that the ultimate outcome of its current claims and legal proceedings, individually and in the aggregate, will not have a material adverse effect on the Company's financial position, cash flows or results of operations. However, claims and legal proceedings are subject to inherent uncertainties and rulings unfavorable to the Company could occur. If an unfavorable ruling were to occur, there exists the possibility of a material adverse effect on the Company's financial position, cash flows or results of operations.
During 2009 the Company received notice that Johnson Crushers International, Inc. is subject to an enforcement action brought by the U.S. Environmental Protection Agency and the Oregon Department of Environmental Quality related to an alleged failure to comply with federal and state air permitting regulations. Each agency is expected to seek sanctions that will include monetary penalties. No penalty has yet been proposed. The Company believes that it has cured the alleged violations and is cooperating fully with the regulatory agencies. At this stage of the investigations, the Company is unable to predict the outcome and the amount of any such sanctions.
During 2004 the Company also received notice from the Environmental Protection Agency that it may be responsible for a portion of the costs incurred in connection with an environmental cleanup in Illinois. The discharge of hazardous materials and associated cleanup relate to activities occurring prior to the Company’s acquisition of Barber Greene in 1986. The Company believes that over 300 other parties have received similar notice. At this time, the Company is unable to predict whether the EPA will seek to hold the Company liable for a portion of the cleanup costs or the amount of any such liability.
The name, title, ages and business experience of the executive officers of the Company are listed below.
J. Don Brock, Ph.D., has been President and a Director of the Company since its incorporation in 1972 and assumed the additional position of Chairman of the Board in 1975. He was the Treasurer of the Company from 1972 until 1994. From 1969 to 1972, Dr. Brock was President of the Asphalt Division of CMI Corporation. He earned his Ph.D. degree in mechanical engineering from the Georgia Institute of Technology. Dr. Brock is the father of Benjamin G. Brock, President of Astec, Inc., and Dr. Brock and Thomas R. Campbell, Group Vice President - Mobile Asphalt Paving and Underground, are first cousins. He is 72.
F. McKamy Hall, a Certified Public Accountant, became Chief Financial Officer during 1998 and has served as Vice President and Treasurer of the Company since 1997. He previously served as Corporate Controller of the Company since 1987. Mr. Hall is also Treasurer of each of the Company’s subsidiary companies and Vice President of Astec Insurance Company. Mr. Hall has an undergraduate degree in accounting and a Master of Business Administration degree from the University of Tennessee at Chattanooga. He is 68.
W. Norman Smith was appointed Group Vice President-Asphalt in 1998 and additionally served as President of Astec, Inc. from 1994 until October 2006. He formerly served as President of Heatec, Inc. from 1977 to 1994. From 1972 to 1977, Mr. Smith was a Regional Sales Manager with the Company. From 1969 to 1972, Mr. Smith was an engineer with the Asphalt Division of CMI Corporation. Mr. Smith has also served as a director of the Company since 1982. He is 71.
Thomas R. Campbell was appointed Group Vice President - Mobile Asphalt Paving & Underground in November 2001. He served as President of Roadtec, Inc. from 1988 to 2004. He has served as President of Carlson Paving Products and American Augers since November 2001 until December 2006. He served as President of Astec Underground, Inc. from 2001 to May 2005. From 1981 to 1988, he served as Operations Manager of Roadtec. Mr. Campbell and J. Don Brock, President of the Company, are first cousins. He is 61.
Richard A. Patek was appointed Group Vice President-Aggregate & Mining Group in March of 2008. He has also served as President of Telsmith, Inc. since May of 2001. He served as President of Kolberg-Pioneer, Inc. from 1997 until May 2001. From 1995 to 1997, he served as Director of Materials of Telsmith, Inc. From 1992 to 1995, Mr. Patek was Director of Materials and Manufacturing of the former Milwaukee plant location. From 1978 to 1992, he held various manufacturing management positions at Telsmith. Mr. Patek is a graduate of the Milwaukee School of Engineering. He is 54.
Joseph P. Vig was appointed Group Vice President of the AggRecon Group in March 2008. He has also served as President of Kolberg-Pioneer, Inc., since May 2001. From 1994 until May 2001, he served as Engineering Manager of Kolberg-Pioneer, Inc. From 1978 to 1993 he was Director of Engineering with Morgen Mfg. Co., and then Engineering Manager of Essick-Mayco in 1993-94. Mr. Vig has a B.S. degree in civil engineering from the South Dakota School of Mines and Technology and is registered as a Professional Engineer. He is 61.
Richard J. Dorris was appointed President of Heatec, Inc. in April of 2004. From 1999 to 2004 he held the positions of National Accounts Manager, Project Manager and Director of Projects for Astec, Inc. Prior to joining Astec, Inc. he was President of Esstee Manufacturing Company from 1990 to 1999 and was Sales Engineer from 1984 to 1990. Mr. Dorris has a B.S. degree in mechanical engineering from the University of Tennessee. He is 50.
Frank D. Cargould was appointed President of Breaker Technology Ltd and Breaker Technology, Inc. on October 18, 1999. The Breaker Technology companies were formed on August 13, 1999 when the Company purchased substantially all of the assets of Teledyne Specialty Equipment's Construction and Mining business unit from Allegheny Teledyne Inc. From 1994 to 1999, he was Director of Sales - East for Teledyne CM Products, Inc. He is 68.
Jeffery J. Elliott was appointed President of Johnson Crushers, Inc. in December 2001. From 1999 to 2001, he served as Senior Vice President for Cedarapids, Inc., (a Terex company), and from 1996 to 1999, he served as Vice President of the Crushing and Screening Group. From 1978 to 1996, he held various domestic and international sales and marketing positions with Cedarapids, Inc. He is 57.
Timothy Gonigam was appointed President of Astec Mobile Screens, Inc., in October 2000. From 1995 to 2000, Mr. Gonigam held the position of Sales Manager of Astec Mobile Screens, Inc. He is 48.
Tom Kruger was appointed Managing Director of Osborn Engineered Products SA (Pty) Ltd on February 1, 2005. For the previous five years, Mr. Kruger was employed as Operations Director of Macsteel Tube and Pipe (Pty) Ltd, a manufacturer of carbon steel tubing in Johannesburg, South Africa. He served as Sales and Marketing Director of Macsteel prior to becoming Operations Director. From 1993 to 1998, Mr. Kruger was employed by Barloworld Ltd as Operations Director and Regional Managing Director responsible for a trading organization in steel, tube and water conveyance systems. Prior to that, he held the position of Works Director. He is 53.
Jeffrey L. Richmond, Sr. was appointed President of Roadtec, Inc. in April 2004. From 1996 until April 2004, he held the positions of Sales Manager, Vice President of Sales and Marketing and Vice President/General Manager of Roadtec, Inc. He is 55.
Joe K. Cline was appointed President of Astec Underground, Inc. in February 2008. Previously he held numerous manufacturing positions with the Company since 1982 including the Company’s Corporate Manufacturing Manager/Safety Champion beginning in July 2007 and Manufacturing Manager for Mobile Asphalt & Underground Groups from 2003 to mid 2007. He is 54.
Michael A. Bremmer was appointed President of CEI Enterprises, Inc. in January 2006. From January 2003 until January 2006, he held the position of Vice President and General Manager of CEI Enterprises, Inc. From January 2001 until January 2003, he held the position of Director of Engineering of CEI Enterprises, Inc. He is 55.
Benjamin G. Brock was appointed President of Astec, Inc. in November 2006. From January 2003 until October 2006 he held the position of Vice President - Sales of Astec, Inc. and Vice President/General Manager of CEI Enterprises, Inc. from 1997 until December 2002. Mr. Brock's career with Astec began as a salesman in 1993. Mr. Brock has a B.S. in Economics with a minor in Marketing from Clemson University. Mr. Brock is the son of J. Don Brock, President of the Company. He is 39.
David L. Winters was appointed President of Carlson Paving Products in January 2007 after previously serving as its Vice President and General Manager from March 2002 until December 2006. Mr. Winters also served as Quality Assurance Manager, Manufacturing Manager and Service Manager for Roadtec from August 1997 to February 2002. From 1977 to 1997 he held various positions in maintenance management with the Tennessee Valley Authority. Mr. Winters is 61.
James F. Pfeiffer was appointed President of American Augers, Inc. in January 2007 after previously serving as its Vice President and General Manager from March 2005 until December 2006. Prior to joining Astec, Mr. Pfeiffer was Vice President and General Manager of Daedong USA from April 2004 to October 2004 and Vice President of Marketing for Blount, Inc. from April 2002 to April 2004. Previously he held numerous positions with Charles Machine Works over a nineteen year period. Mr. Pfeiffer holds a bachelors degree in Agriculture from Oklahoma State University. Mr. Pfeiffer is 53.
Stephen C. Anderson was appointed Secretary of the Company in January 2007 and assumed the role of Director of Investor Relations in January 2003. Mr. Anderson also serves as the Company’s compliance officer and manages the corporate information technology and aviation departments. He has also been President of Astec Insurance Company since January 2007. He was Vice President of Astec Financial Services, Inc. from November 1999 to December 2002. Prior to this Mr. Anderson spent a combined fourteen years in Commercial Banking with AmSouth and SunTrust Banks. He has a B.S. degree in Business Management and a MBA from the University of Tennessee at Chattanooga and is a graduate of the Stonier Graduate School of Banking. He is 47.
David C. Silvious, a Certified Public Accountant, was appointed Corporate Controller in 2005. He previously served as Corporate Financial Analyst since 1999. Mr. Silvious earned his undergraduate degree in accounting from Tennessee Technological University and his Masters of Business Administration from the University of Tennessee at Chattanooga. He is 43.
Larry R. Cumming was appointed President of Peterson Pacific Corp. in August 2007. He joined the company in 2003 and held the earlier positions of General Manager and Chief Executive Officer of Peterson, Inc. Prior to joining Peterson, he held senior management positions in North America and Europe with Timberjack and John Deere (Deere acquired Timberjack in 2000). Mr. Cumming also held prior positions with Timberjack as Vice President Engineering and Senior Vice President Sales and Marketing, Chief Operating Officer and Executive Vice President Product Supply. Mr. Cumming is a graduate mechanical engineer from Cornell University with additional senior management courses from INSEAD in France. He is a registered professional engineer in the Province of Ontario. Mr. Cumming is 62.
David H. Smale was appointed General Manager of Astec Australia Pty Ltd in October 2008 upon the inception of the company’s operations. He served as the General Manager of Allen’s Asphalt from 2006 to 2008 and as their Operations Manager from 2004 to 2006. Mr. Smale has completed various business management courses including the Macquire University Graduate School of Management and Bond University Senior Executive Development Program. Mr. Smale is 55.
PART II
Item 5. Market for Registrant's Common Equity; Related Stockholder Matters and Issuer Purchases
of Equity Securities
The Company's Common Stock is traded in the Nasdaq National Market under the symbol "ASTE." The Company has never paid any cash dividends on its Common Stock and the Company does not intend to pay dividends on its Common Stock in the foreseeable future.
The high and low sales prices of the Company's Common Stock as reported on the Nasdaq National Market for each quarter during the last two fiscal years are as follows:
|
|
Price Per Share
|
|
2010
|
|
High
|
|
Low
|
|
1st Quarter
|
|
$ |
32.09 |
|
$ |
22.98 |
|
2nd Quarter
|
|
$ |
36.94 |
|
$ |
27.05 |
|
3rd Quarter
|
|
$ |
32.35 |
|
$ |
25.28 |
|
4th Quarter
|
|
$ |
33.60 |
|
$ |
27.31 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Price Per Share
|
|
2009
|
|
High
|
|
Low
|
|
1st Quarter
|
|
$ |
33.68 |
|
$ |
18.52 |
|
2nd Quarter
|
|
$ |
33.68 |
|
$ |
23.62 |
|
3rd Quarter
|
|
$ |
30.33 |
|
$ |
22.85 |
|
4th Quarter
|
|
$ |
28.02 |
|
$ |
22.76 |
|
As of February 17, 2011 there were approximately 8,600 holders of the Company's Common Stock.
Item 6. Selected Financial Data
Selected financial data appears in Appendix "A" of this Report.
Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations
Management's discussion and analysis of financial condition and results of operations appears in Appendix "A" of this Report.
Item 7A. Quantitative and Qualitative Disclosures about Market Risk
Information appearing under the caption "Market Risk and Risk Management Policies" appears in Appendix "A" of this Report.
Item 8. Financial Statements and Supplementary Data
Financial statements and supplementary financial information appear in Appendix "A" of this Report.
Item 9. Changes In and Disagreements with Accountants on Accounting and Financial Disclosure
None.
Evaluation of Disclosure Controls and Procedures
We have established disclosure controls and procedures to ensure that the information required to be disclosed by the Company in the reports that it files or submits under the Securities Exchange Act of 1934 is recorded, processed, summarized and reported within the time periods specified in SEC rules and forms and that such information is accumulated and made known to the officers who certify the Company’s financial reports and to other members of senior management and the Board of Directors as appropriate to allow timely decisions regarding required disclosure.
Based on their evaluation as of December 31, 2010, the principal executive officer and principal financial officer of the Company have concluded that the Company’s disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934) are effective.
Management’s Report on Internal Control Over Financial Reporting
Management’s report set forth in Appendix A is incorporated herein by reference.
Changes in Internal Controls
There have been no changes in our internal control over financial reporting during the fourth quarter of the year ended December 31, 2010, that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
None
PART III
Item 10. Directors, Executive Officers and Corporate Governance
Information regarding the Company's directors, director nominating process, audit committee, and audit committee financial expert is included under the captions "Certain Information Concerning Nominees and Directors" and “Corporate Governance” in the Company's Proxy Statement to be delivered to the shareholders of the Company in connection with the Annual Meeting of Shareholders to be held on April 28, 2011, which is incorporated herein by reference. Information regarding compliance with Section 16(a) of the Exchange Act is also included under "Section 16(a) Beneficial Ownership Reporting Compliance" in the Company's 2011 Proxy Statement, which is incorporated herein by reference. Information with respect to our executive officers is set forth in Part I of this Report under the caption, “Executive Officers.”
The Company's Board of Directors has approved a Code of Conduct and Ethics that applies to the Company's employees, directors and officers (including the Company's principal executive officer, principal financial officer and principal accounting officer). The Code of Conduct and Ethics is available on the Company's website at www.astecindustries.com/investors/.
Information included under the captions "Compensation Discussion and Analysis", "Executive Compensation", “Compensation Committee Interlocks and Insider Participation” and “Compensation Committee Report” in the Company's 2011 Proxy Statement is incorporated herein by reference.
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Shareholder Matters
Information included under the captions "Stock Ownership of Certain Beneficial Owners and Management" and “Securities Authorized for Issuance Under Equity Compensation Plans” in the Company's 2011 Proxy Statement is incorporated herein by reference.
Item 13. Certain Relationships and Related Transactions, and Director Independence
Information included under the captions “Corporate Governance: Independent Directors” and “Transactions with Related Persons” in the Company’s 2011 Proxy Statement is incorporated herein by reference.
Item 14. Principal Accounting Fees and Services
Information included under the caption “Audit Matters” in the Company’s 2011 Proxy Statement is incorporated herein by reference.
PART IV
Item 15. Exhibits and Financial Statement Schedules
(a)(1) The following financial statements and other information appear in Appendix “A” to this Report and are filed as a part hereof:
|
. Selected Consolidated Financial Data.
|
|
. Management’s Discussion and Analysis of Financial Condition and Results of Operations.
|
|
. Management’s Report on Internal Control over Financial Reporting.
|
|
. Reports of Independent Registered Public Accounting Firm.
|
|
. Consolidated Balance Sheets at December 31, 2010 and 2009.
|
|
. Consolidated Statements of Operations for the Years Ended December 31, 2010, 2009 and 2008.
|
|
. Consolidated Statements of Cash Flows for the Years Ended December 31, 2010, 2009 and 2008.
|
|
. Consolidated Statements of Equity for the Years Ended December 31, 2010, 2009 and 2008.
|
|
. Notes to Consolidated Financial Statements.
|
(a)(2) Other than as described below, Financial Statement Schedules are not filed with this Report because the Schedules are either inapplicable or the required information is presented in the Financial Statements or Notes thereto. The following Schedule appears in Appendix “A” to this Report and is filed as a part hereof:
Schedule II – Valuation and Qualifying Accounts.
|
|
(a)(3) The following Exhibits* are incorporated by reference into or are filed with this Report:
|
|
3.1
|
Restated Charter of the Company (incorporated by reference from the Company’s Registration Statement on Form S-1, effective June 18, 1986).
|
|
3.2
|
Articles of Amendment to the Restated Charter of the Company, effective September 12, 1988 (incorporated by reference from the Company’s Annual Report on Form 10-K for the year ended December 31, 1988).
|
|
3.3
|
Articles of Amendment to the Restated Charter of the Company, effective June 8, 1989 (incorporated by reference from the Company’s Annual Report on Form 10-K for the year ended December 31, 1989).
|
|
3.4
|
Articles of Amendment to the Restated Charter of the Company, effective January 15, 1999 (incorporated by reference from the Company Quarterly Report on Form 10-Q for the period ended June 30, 1999).
|
|
3.5
|
Amended and Restated Bylaws of the Company, adopted on March 14, 1990 and as amended on July 29, 1993, and July 26, 2007 (incorporated by reference from the Company’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2008).
|
|
3.6
|
Third Amendment to the Amended and Restated Bylaws of the Company adopted on July 23, 2008 (incorporated by reference from the Company’s Form 8-K filed on July 29, 2008.
|
|
4.1
|
Amended and Restated Shareholder Protection Rights Agreement, dated as of December 22, 2005, by and between the Company and Mellon Investor Services LLC, as Rights Agent. (incorporated by reference from the Company’s Current Report on Form 8-K dated December 22, 2005).
|
|
10.1
|
Trust under Astec Industries, Inc. Supplemental Retirement Plan, dated January 1, 1996 (incorporated by reference from the Company’s Annual Report on Form 10-K for the year ended December 31, 1995). *
|
|
10.2
|
Astec Industries, Inc. 1998 Long-Term Incentive Plan (incorporated by reference from Appendix A of the Company’s Proxy Statement for the 1998 Annual Meeting of Shareholders). *
|
|
10.3
|
Astec Industries, Inc. Executive Officer Annual Bonus Equity Election Plan (incorporated by reference from Appendix B of the Company’s Proxy Statement for the 1998 Annual Meeting of Shareholders). *
|
|
10.4
|
Astec Industries, Inc. 1998 Non-Employee Directors’ Stock Incentive Plan (incorporated by reference from the Company’s Annual Report on Form 10-K for the year ended December 31, 1999). *
|
|
10.5
|
Amendment Number 1 to Astec Industries, Inc. 1998 Non-Employee Directors’ Stock Incentive Plan, dated March 15, 2005 (incorporated by reference from the Company’s Current Report on Form 8-K dated March 15, 2005). *
|
|
10.6
|
Amendment Number 2 to the Astec Industries, Inc. 1998 Non-Employee Directors Stock Incentive Plan, dated February 21, 2006 (incorporated by reference from the Company’s Current Report on Form 8-K dated February 27, 2006).*
|
|
10.7
|
Amendment Number 3 to the Astec Industries, Inc. 1998 Non-Employee Directors Stock Incentive Plan (incorporated by reference from the Company’s Annual Report on form 10-K for the year ended December 31, 2008).*
|
|
10.8
|
Astec Industries, Inc. 2006 Incentive Plan (incorporated by reference from Appendix A of the Company’s Proxy Statement for the 2006 Annual Meeting of Shareholders). *
|
|
10.9
|
Amendment Number 1 to Astec Industries, Inc. 2006 Incentive Plan (incorporated by reference from the Company’s Annual Report on form 10-K for the year ended December 31, 2008).*
|
|
10.10
|
Credit Agreement dated as of April 13, 2007 between Astec Industries, Inc. and Certain of Its Subsidiaries and Wachovia Bank, National Association (incorporated by reference from the Company’s Quarterly Report on form 10-Q for the quarter ended March 31, 2007).
|
|
10.11
|
First Amendment to the Credit Agreement between Astec Industries, Inc. and Certain of Its Subsidiaries and Wachovia Bank, National Association (incorporated by reference from the Company’s Quarterly Report on form 10-Q for the quarter ended September 30, 2007).
|
|
10.12
|
Agreement, dated February 5, 2009, to extend Credit Agreement dated as of April 13, 2007 between Astec Industries, Inc. and Certain of Its Subsidiaries and Wachovia Bank, National Association (incorporated by reference from the Company’s Quarterly Report on Form 10-Q for the quarter ended March 31, 2010).
|
|
10.13
|
Stock Purchase Agreement by and among Astec Industries, Inc., Dillman Equipment, Inc. and the sellers named therein dated August 5, 2008 (incorporated by reference from the Company’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2008).
|
|
10.14
|
Stock Purchase Agreement by and among Astec Industries, Inc., Double L Investments, Inc. and the sellers named therein dated August 5, 2008 (incorporated by reference from the Company’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2008).
|
|
10.15
|
Astec Industries, Inc. Supplemental Executive Retirement Plan, as amended and restated through January 1, 2009 (incorporated by reference from the Company’s Annual Report on form 10-K for the year ended December 31, 2008).*
|
|
10.16
|
Agreement dated January 26, 2010 to extend Credit Agreement dated as of April 13, 2007 between Astec Industries, Inc. and Certain of Its Subsidiaries and Wachovia Bank, National Association (incorporated by reference from the Company’s Annual Report on form 10-K for the year ended December 31, 2009).
|
|
10.17
|
Amendment One to the Amended and Restated Astec Industries, Inc. Supplemental Executive Retirement Plan effective October 21, 2010.*
|
|
21
|
Subsidiaries of the Registrant.
|
|
23
|
Consent of Independent Registered Public Accounting Firm.
|
|
31.1
|
Certification of Chief Executive Officer of Astec Industries, Inc. pursuant Rule 13a-14(a)/15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act Of 2002.
|
|
31.2
|
Certification of Chief Financial Officer of Astec Industries, Inc. pursuant Rule 13a-14(a)/15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act Of 2002.
|
|
32
|
Certification of Chief Executive Officer and Chief Financial Officer of Astec Industries, Inc. pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act Of 2002.
|
|
101.INS
|
**XBRL Instance Document
|
|
101.SCH
|
**XBRL Taxonomy Extension Schema
|
|
101.CAL
|
**XBRL Taxonomy Extension Calculation Linkbase
|
|
101.DEF
|
**XBRL Taxonomy Extension Definition Linkbase
|
|
101.LAB
|
**XBRL Taxonomy Extension Label Linkbase
|
|
101.PRE
|
**XBRL Taxonomy Extension Presentation Linkbase
|
|
*
|
Management contract or compensatory plan or arrangement.
|
|
**
|
Pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or prospectus for purposes of sections 11 or 12 of the Securities Act of 1933 or Section 18 of the Securities Exchange Act of 1934 and otherwise are not subject to liability under those sections.
|
(b)
|
The Exhibits to this Report are listed under Item 15(a)(3) above.
|
(c)
|
The Financial Statement Schedules to this Report are listed under Item 15(a)(2) above.
|
The Exhibits are numbered in accordance with Item 601 of Regulation S-K. Inapplicable Exhibits are not included in the list.
|
to
ANNUAL REPORT ON FORM 10-K
ITEMS 6, 7, 7a, 8, 9a and 15(a)(1), (2)and (3),and 15(b) and 15(c)
INDEX TO FINANCIAL STATEMENTS AND
FINANCIAL STATEMENT SCHEDULES
ASTEC INDUSTRIES, INC.
Contents
|
|
Page
|
|
|
|
|
|
A-3
|
|
|
|
|
|
A-5
|
|
|
|
|
|
A-22
|
|
|
|
|
|
A-23
|
|
|
|
|
|
A-25
|
|
|
|
|
|
A-26
|
|
|
|
|
|
A-27
|
|
|
|
|
|
A-29
|
|
|
|
|
|
A-30
|
|
|
|
|
|
A-63
|
|
|
|
FINANCIAL
INFORMATION
(in thousands, except as noted*)
|
|
2010
|
|
|
2009
|
|
|
2008
|
|
|
2007
|
|
|
2006
|
|
Consolidated Statement of Operations Data
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net sales
|
|
$ |
771,335 |
|
|
$ |
738,094 |
|
|
$ |
973,700 |
|
|
$ |
869,025 |
|
|
$ |
710,607 |
|
Gross profit
|
|
|
179,047 |
|
|
|
152,427 |
|
|
|
233,311 |
|
|
|
209,176 |
|
|
|
168,119 |
|
Gross profit %
|
|
|
23.2 |
% |
|
|
20.7 |
% |
|
|
24.0 |
% |
|
|
24.1 |
% |
|
|
23.7 |
% |
Selling, general and administrative expenses
|
|
|
114,141 |
|
|
|
107,455 |
|
|
|
122,621 |
|
|
|
107,600 |
|
|
|
94,383 |
|
Intangible asset impairment charge1
|
|
|
-- |
|
|
|
17,036 |
|
|
|
-- |
|
|
|
-- |
|
|
|
-- |
|
Research and development
|
|
|
17,482 |
|
|
|
18,029 |
|
|
|
18,921 |
|
|
|
15,449 |
|
|
|
13,561 |
|
Income from operations
|
|
|
47,424 |
|
|
|
9,907 |
|
|
|
91,769 |
|
|
|
86,127 |
|
|
|
60,176 |
|
Interest expense
|
|
|
352 |
|
|
|
537 |
|
|
|
851 |
|
|
|
853 |
|
|
1,672
|
|
Other income (expense), net2
|
|
|
675 |
|
|
|
1,137 |
|
|
|
6,255 |
|
|
|
399 |
|
|
|
334 |
|
Net Income attributable to controlling interest
|
|
|
32,430 |
|
|
|
3,068 |
|
|
|
63,128 |
|
|
|
56,797 |
|
|
|
39,588 |
|
Earnings per common share*
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net Income attributable to controlling interest
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Basic
|
|
|
1.44 |
|
|
|
0.14 |
|
|
|
2.83 |
|
|
|
2.59 |
|
|
|
1.85 |
|
Diluted
|
|
|
1.42 |
|
|
|
0.14 |
|
|
|
2.80 |
|
|
|
2.53 |
|
|
|
1.81 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Consolidated Balance Sheet Data
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Working capital
|
|
$ |
317,395 |
|
|
$ |
278,058 |
|
|
$ |
251,263 |
|
|
$ |
204,839 |
|
|
$ |
178,148 |
|
Total assets
|
|
|
649,639 |
|
|
|
590,901 |
|
|
|
612,812 |
|
|
|
542,570 |
|
|
|
421,863 |
|
Total short-term debt
|
|
|
-- |
|
|
|
-- |
|
|
|
3,427 |
|
|
|
-- |
|
|
|
-- |
|
Long-term debt, less current maturities
|
|
|
-- |
|
|
|
-- |
|
|
|
-- |
|
|
|
-- |
|
|
|
-- |
|
Total equity
|
|
|
492,806 |
|
|
|
452,260 |
|
|
|
440,033 |
|
|
|
377,473 |
|
|
|
296,865 |
|
Book value per diluted common share at year-end*
|
|
|
21.56 |
|
|
|
19.89 |
|
|
|
19.45 |
|
|
|
16.78 |
|
|
|
13.51 |
|
1 2009 includes impairment charges, primarily goodwill, of $17,036,000, or $15,022,000 after tax.
2 During 2008, the Company sold certain equity securities for a pre-tax gain of $6,195,000.
SUPPLEMENTARY FINANCIAL DATA
(in thousands, except as noted*)
Quarterly Financial Highlights
(Unaudited)
|
|
First
Quarter
|
|
|
Second
Quarter
|
|
|
Third
Quarter
|
|
|
Fourth
Quarter
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010 Net sales
|
|
$ |
193,454 |
|
|
$ |
209,249 |
|
|
$ |
177,853 |
|
|
$ |
190,779 |
|
Gross profit
|
|
|
46,141 |
|
|
|
46,678 |
|
|
|
41,940 |
|
|
|
44,288 |
|
Net income
|
|
|
8,832 |
|
|
|
10,330 |
|
|
|
7,396 |
|
|
|
6,015 |
|
Net income attributable to controlling interest
|
|
|
8,794 |
|
|
|
10,308 |
|
|
|
7,362 |
|
|
|
5,967 |
|
Earnings per common share*
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net income attributable to controlling interest:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Basic
|
|
|
0.39 |
|
|
|
0.46 |
|
|
|
0.33 |
|
|
|
0.26 |
|
Diluted
|
|
|
0.39 |
|
|
|
0.45 |
|
|
|
0.32 |
|
|
|
0.26 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009 Net sales
|
|
$ |
205,304 |
|
|
$ |
188,843 |
|
|
$ |
166,084 |
|
|
$ |
177,863 |
|
Gross profit
|
|
|
43,710 |
|
|
|
42,908 |
|
|
|
34,645 |
|
|
|
31,164 |
|
Net income (loss)1
|
|
|
7,396 |
|
|
|
7,776 |
|
|
|
3,368 |
|
|
|
(15,434 |
) |
Net income (loss) attributable to controlling interest1
|
|
|
7,431 |
|
|
|
7,749 |
|
|
|
3,344 |
|
|
|
(15,456 |
) |
Earnings per common share*
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net income (loss) attributable to controlling
interest:1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Basic
|
|
|
0.33 |
|
|
|
0.35 |
|
|
|
0.15 |
|
|
|
(0.69 |
) |
Diluted
|
|
|
0.33 |
|
|
|
0.34 |
|
|
|
0.15 |
|
|
|
(0.69 |
) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Common Stock Price*
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010 High
|
|
$ |
32.09 |
|
|
$ |
36.94 |
|
|
$ |
32.35 |
|
|
$ |
33.60 |
|
2010 Low
|
|
|
22.98 |
|
|
|
27.05 |
|
|
|
25.28 |
|
|
|
27.31 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009 High
|
|
$ |
33.68 |
|
|
$ |
33.68 |
|
|
$ |
30.33 |
|
|
$ |
28.02 |
|
2009 Low
|
|
|
18.52 |
|
|
|
23.62 |
|
|
|
22.85 |
|
|
|
22.76 |
|
The Company’s common stock is traded on the National Association of Securities Dealers Automated Quotation (NASDAQ) National Market under the symbol ASTE. Prices shown are the high and low bid prices as announced by NASDAQ. The Company has never paid dividends on its common stock and does not intend to pay dividends on its common stock in the foreseeable future. As determined by the proxy search on the record date, the number of common shareholders is approximately 8,600.
1 The fourth quarter of 2009 includes impairment charges, primarily goodwill of $17,036,000, or $15,022,000 after tax.
CONDITION AND RESULTS OF OPERATIONS
The following discussion contains forward-looking statements that involve inherent risks and uncertainties. Actual results may differ materially from those contained in these forward-looking statements. For additional information regarding forward-looking statements, see “Forward-looking Statements” on page A-20.
Overview
Astec Industries, Inc., (“the Company”) is a leading manufacturer and marketer of equipment for road building, aggregate processing, directional drilling, trenching and wood processing. The Company’s businesses:
|
•
|
design, engineer, manufacture and market equipment that is used in each phase of road building, including quarrying and crushing the aggregate to producing asphalt or concrete, recycling old asphalt or concrete and applying the asphalt;
|
|
•
|
design, engineer, manufacture and market additional equipment and components including trenching, auger boring, directional drilling, geothermal drilling, oil and natural gas drilling, industrial heat transfer, wood chipping and grinding; and
|
|
•
|
manufacture and sell replacement parts for equipment in each of its product lines.
|
The Company has 14 manufacturing companies, 13 of which fall within four reportable operating segments, which include the Asphalt Group, the Aggregate and Mining Group, the Mobile Asphalt Paving Group and the Underground Group. The business units in the Asphalt Group design, manufacture and market a complete line of asphalt plants and related components, heating and heat transfer processing equipment and storage tanks for the asphalt paving and other unrelated industries including energy production and concrete mixing plants. The business units in the Aggregate and Mining Group design, manufacture and market equipment for the aggregate, metallic mining and recycling industries. The business units in the Mobile Asphalt Paving Group design, manufacture and market asphalt pavers, material transfer vehicles, milling machines, stabilizers and screeds. The business units in the Underground Group design, manufacture and market a complete line of trenching equipment, directional drills, geothermal drills and auger boring machines for the underground construction market, as well as vertical drills for gas and oil field development. The Company also has one other category that contains the business units that do not meet the requirements for separate disclosure as an operating segment. The business units in the Other category include Peterson Pacific Corp. (“Peterson”), Astec Australia Pty Ltd (“Astec Australia”), Astec Insurance Company (“Astec Insurance” or “the captive”) and Astec Industries, Inc., the parent company. Peterson designs, manufactures and markets whole-tree pulpwood chippers, horizontal grinders and blower trucks. Astec Australia markets and installs equipment, services and provides parts for many of the products produced by the Company’s manufacturing companies. Astec Insurance is a captive insurance company.
The Company’s financial performance is affected by a number of factors, including the cyclical nature and varying conditions of the markets it serves. Demand in these markets fluctuates in response to overall economic conditions and is particularly sensitive to the amount of public sector spending on infrastructure development, privately funded infrastructure development, changes in the price of crude oil, which affects the cost of fuel and liquid asphalt, and changes in the price of steel.
In August 2005, President Bush signed into law the Safe, Accountable, Flexible and Efficient Transportation Equity Act - A Legacy for Users (“SAFETEA-LU”), which authorized appropriation of $286.5 billion in guaranteed federal funding for road, highway and bridge construction, repair and improvement of the federal highways and other transit projects for federal fiscal years October 1, 2004 through September 30, 2009. The Company believes that federal highway funding such as SAFETEA-LU influences the purchasing decisions of the Company’s customers who are more comfortable making purchasing decisions with such legislation in place. Federal funding provides for approximately 25% of all highway, street, roadway and parking construction put in place in the United States.
SAFETEA-LU funding expired on September 30, 2009 and federal transportation funding operated on short-term appropriations through March 17, 2010. On March 18, 2010, President Obama signed into law the Hiring Incentives to Restore Employment (HIRE) Act. This law extended authorization of the surface transportation programs previously funded under SAFETEA-LU through December 31, 2010 at 2009 levels. In addition, the HIRE Act authorized a one-time transfer of $19.5 billion from the general fund to the highway trust fund related to previously foregone interest payments. It also shifted the cost of fuel tax exemptions for state and local governments from the highway trust fund to the general fund, which is estimated to generate an anticipated $1.5 billion annually, and allows the highway trust fund to retain interest earned on future unexpended balances. Although the HIRE Act helped stabilize the federal highway program, the Company believes a new multi-year highway program would have the greatest positive impact on the road construction industry and allow its customers to plan and execute longer-term projects. The current continuing resolution funding federal transportation expenditures expires on March 4, 2011 and Congress is working on a number of proposals to continue funding at various levels. With the current political environment in Washington, the level of continuing funding of federal highway projects is uncertain. Although continued funding is expected, it may be at lower levels than in the past and new Congressional long-term funding acts may not be enacted in the near future.
Several other countries have implemented infrastructure spending programs to stimulate their economies. The Company believes these spending programs have had a positive impact on its financial performance; however, the magnitude of that impact cannot be determined.
The public sector spending described above is needed to fund road, bridge and mass transit improvements. The Company believes that increased funding is unquestionably needed to restore the nation’s highways to a quality level required for safety, fuel efficiency and mitigation of congestion. In the Company’s opinion, amounts needed for such improvements are significantly greater than amounts approved to date, and funding mechanisms such as the federal usage fee per gallon of gasoline, which has not been increased in 17 years, would likely need to be increased along with other measures to generate the funds needed.
In addition to public sector funding, the economies in the markets the Company serves, the price of oil and its impact on customers’ purchase decisions and the price of steel may each affect the Company’s financial performance. Economic downturns, like the one experienced from 2001 through 2003, and the current downturn that began in late 2008, generally result in decreased purchasing by the Company’s customers, which, in turn, causes reductions in sales and increased pricing pressure on the Company’s products. Rising interest rates also typically negatively impact customers’ attitudes toward purchasing equipment. The Federal Reserve has maintained historically low interest rates in response to the current economic downturn, and the Company expects only slight changes, if any, in interest rates in the near term; however, management believes that upward pressure is building on long-term interest rates.
Significant portions of the Company’s revenues relate to the sale of equipment involved in the production, handling and installation of asphalt mix. Liquid asphalt is a by-product of oil production. An increase in the price of oil increases the cost of asphalt, which is likely to decrease demand for asphalt and therefore decrease demand for certain Company products. While increasing oil prices may have a negative financial impact on many of the Company’s customers, the Company’s equipment can use a significant amount of recycled asphalt pavement, thereby mitigating the final cost of asphalt for the customer. The Company continues to develop products and initiatives to reduce the amount of oil and related products required to produce asphalt mix. Oil price volatility makes it difficult to predict the costs of oil-based products used in road construction such as liquid asphalt and gasoline. The Company’s customers appear to be adapting their prices in response to the fluctuating oil prices, and the fluctuations did not appear to significantly impair equipment purchases in 2009 and 2010. The Company expects oil prices to continue to fluctuate in 2011. Minor fluctuations in oil prices like those experienced in 2009 and 2010 should not have a significant impact on customers’ buying decisions. However, political uncertainty in oil producing countries, interruptions in oil production due to disasters, whether natural or man-made, or other economic factors could significantly impact oil prices which could negatively impact demand for the Company’s products.
Contrary to the negative impact of higher oil prices on many of the Company’s products as discussed above, sales of several of the Company’s products, including products manufactured by the Underground Group, which are used to drill for oil and natural gas and install oil and natural gas pipelines, would benefit from higher oil and natural gas prices, to the extent that such higher prices lead to further development of oil and natural gas production. The Company believes additional domestic oil and natural gas production development is necessary and would positively impact the domestic economy.
Steel is a major component in the Company’s equipment. Steel pricing declined sharply in the fourth quarter of 2008 and into 2009. Favorable pricing continued through 2009 causing steel mills to reduce production to match reduced demand. Steel customers worked through their excess inventories of steel during 2009 and began buying steel again in 2010, albeit at reduced levels causing steel prices to remain relatively stable. Near the end of 2010, steel prices began a rapid series of raw material based increases that will likely continue through the first quarter of 2011. Although a portion of this increase in prices in the first quarter of 2011 will be mitigated due to advanced steel purchases and supply contracts at negotiated prices, the Company may still experience rising steel prices during 2011. Although the Company normally institutes price increases in response to rising steel and component prices, the Company may not be able to raise the prices of its products enough to cover increased costs, resulting in the Company’s financial results being negatively affected. The Company will continue to closely monitor steel pricing and will take advantage of buying opportunities to offset such future pricing where possible.
In addition to the factors stated above, many of the Company’s markets are highly competitive, and its products compete worldwide with a number of other manufacturers and dealers that produce and sell similar products. During the first half of 2009 the dollar was stronger relative to currencies in many of the Company’s foreign markets, negatively impacting the Company’s international sales. During the latter half of 2009 and during 2010, a weakening dollar, combined with improving economic conditions in certain foreign economies, had a positive impact on the Company’s international sales. The Company expects the dollar to remain weak in the near-term relative to most foreign currencies; however, increasing domestic interest rates or weakening economic conditions abroad could cause the dollar to strengthen, possibly negatively impacting the Company’s international sales.
In the United States and internationally, the Company’s equipment is marketed directly to customers as well as through dealers. During 2010, approximately 75% to 80% of equipment sold by the Company was sold directly to the end user. The Company expects this ratio to remain relatively consistent through 2011.
The Company is operated on a decentralized basis and there is a complete management team for each operating subsidiary. Finance, insurance, legal, shareholder relations, corporate accounting and other corporate matters are primarily handled at the corporate level (i.e., Astec Industries, Inc., the parent company). The engineering, design, sales, manufacturing and basic accounting functions are all handled at each individual subsidiary. Standard accounting procedures are prescribed and followed in all reporting.
The non-union employees of each subsidiary have the opportunity to earn profit-sharing incentives in the aggregate up to 10% of each subsidiary’s after-tax profit if such subsidiary meets established goals. These goals are based on the subsidiary’s return on capital employed, cash flow on capital employed and safety. The profit-sharing incentives for subsidiary presidents are normally paid from a separate corporate pool.
Results of Operations: 2010 vs. 2009
Net Sales
Net sales increased $33,241,000 or 4.5%, from $738,094,000 in 2009 to $771,335,000 in 2010. Sales are generated primarily from new equipment purchases made by customers for use in construction for privately funded infrastructure and public sector spending on infrastructure. The overall increase in sales for 2010 compared to 2009 reflects the strengthening economic conditions, primarily in foreign economies.
Domestic sales for 2010 were $476,928,000 or 61.8% of consolidated net sales compared to $465,473,000 or 63.1% of consolidated net sales for 2009, an increase of $11,455,000 or 2.5%.
International sales for 2010 were $294,407,000 or 38.2% of consolidated net sales compared to $272,621,000 or 36.9% of consolidated net sales for 2009, an increase of $21,786,000 or 8.0%. The overall increase in international sales for 2010 compared to 2009 is due to strong economic conditions in the international markets the company serves as well as weakness in the U.S. dollar during 2010. In addition, the Company has added additional sales personnel in an effort to further expand international sales.
Parts sales as a percentage of consolidated net sales increased 160 basis points to 26.0% in 2010 from 24.4% in 2009. In dollar terms, parts sales increased 11.2% to $200,451,000 in 2010 from $180,332,000 in 2009.
Gross Profit
Consolidated gross profit as a percentage of sales increased 250 basis points to 23.2% in 2010 from 20.7% in 2009. The primary reason for the overall increase in gross margin as a percent of sales is increased plant utilization due to higher production volumes resulting from sales into strengthening foreign economies combined with a focused effort to reduce production costs through lean manufacturing initiatives and more efficient production methods. In addition, parts sales, which typically yield a higher gross margin, increased year over year, as described above.
Selling, General and Administrative Expense
Selling, general and administrative expenses for 2010 were $114,141,000, or 14.8% of net sales, compared to $107,455,000, or 14.6% of net sales, for 2009, an increase of $6,686,000, or 6.2%. The increase was primarily due to an increase in payroll and related expenses of $3,218,000, an increase in travel expenses of $1,561,000, an increase in sales commissions of $1,524,000, an increase in expense related to the Company’s formula-driven stock incentive program of $1,002,000, and an increase in Supplemental Executive Retirement Plan expense of $854,000. These increases were offset by decreases in health insurance expense of $1,236,000 and bad debt expense of $1,034,000.
Research and Development
Research and Development expenses decreased $547,000 or 3.0% to $17,482,000 in 2010 from $18,029,000 in 2009. During 2009 the Company invested heavily in research and development projects. The Company has reduced research and development expenditures only slightly in 2010.
Intangible Asset Impairment Charges
During the fourth quarter of 2009, the Company recorded non-cash intangible asset impairment charges of $17,036,000. These charges consisted of an impairment charge to goodwill of $16,716,000 and an impairment charge to other intangible assets of $320,000.
Interest Expense
Interest expense in 2010 decreased $185,000, or 34.5%, to $352,000 from $537,000 in 2009. The decrease in interest expense in 2010 compared to 2009 related primarily to interest on state tax settlements incurred in 2009.
Interest Income
Interest income increased $222,000 or 30.2% to $956,000 in 2010 from $734,000 in 2009. The primary reason for the increase in interest income is an increase in amounts invested in 2010 compared to 2009.
Other Income (Expense), Net
Other income (expense), net was $675,000 in 2010 compared to $1,137,000 in 2009, a decrease of $462,000 or 40.6%. The primary reason for the decrease in other income is a decrease in investment income at Astec Insurance Company from 2009 to 2010.
Income Tax
Income tax expense for 2010 was $16,131,000, compared to income tax expense of $8,135,000 for 2009. The effective tax rates for 2010 and 2009 were 33.1% and 72.4%, respectively. The primary reasons for the significant decrease in the effective tax rate from 2009 to 2010 is the intangible asset impairment charges in 2009 that were not fully deductible for income tax purposes combined with increased research and development tax credits and the qualified production activity deductions in 2010 compared to 2009.
Net Income Attributable To Controlling Interest
The Company had net income attributable to controlling interest of $32,430,000 in 2010 compared to $3,068,000 in 2009, an increase of $29,362,000, or 957.0%. Earnings per diluted share were $1.42 in 2010 compared to $0.14 in 2009, an increase of $1.28 or 914.3%. Weighted average diluted shares outstanding for the years ended December 31, 2010 and 2009 were 22,829,799 and 22,715,780, respectively. The increase in shares outstanding is primarily due to the exercise of stock options by employees of the Company.
Backlog
The backlog of orders at December 31, 2010 was $216,627,000 compared to $135,090,000 at December 31, 2009, an increase of $81,537,000, or 60.4%. The increase in the backlog of orders was due to an increase in domestic backlog of $34,144,000 or 46.9% and an increase in international backlog of $47,393,000 or 76.1%. The increase in backlog occurred in each of the Company’s segments except for the Other Group which experienced a decrease in backlog of $274,000 or 4.4%. The Company is unable to determine whether the increase in backlogs was experienced by the industry as a whole; however, the Company believes the increased backlog reflects the current economic conditions the industry is experiencing.
Net Sales by Segment (in thousands)
|
|
2010
|
|
|
2009
|
|
|
$ Change
|
|
|
% Change
|
|
Asphalt Group
|
|
$ |
226,419 |
|
|
$ |
258,527 |
|
|
$ |
(32,108 |
) |
|
|
(12.4 |
%) |
Aggregate and Mining Group
|
|
|
256,400 |
|
|
|
218,332 |
|
|
|
38,068 |
|
|
|
17.4 |
% |
Mobile Asphalt Paving Group
|
|
|
166,436 |
|
|
|
136,836 |
|
|
|
29,600 |
|
|
|
21.6 |
% |
Underground Group
|
|
|
60,105 |
|
|
|
67,353 |
|
|
|
(7,248 |
) |
|
|
(10.8 |
%) |
Other Group
|
|
|
61,975 |
|
|
|
57,046 |
|
|
|
4,929 |
|
|
|
8.6 |
% |
Asphalt Group: Sales in this group decreased to $226,419,000 in 2010 compared to $258,527,000 in 2009, a decrease of $32,108,000 or 12.4%. Domestic sales for the Asphalt Group decreased 12.6% in 2010 compared to 2009. The Company believes this segment was the beneficiary of federal stimulus spending under the American Recovery and Reinvestment Act of 2009 (“ARRA”), which provided $27.5 billion of additional funding for transportation construction projects. Domestic sales in 2010 were negatively impacted by the lack of a long-term highway bill. International sales for the Asphalt Group decreased 11.9% in 2010 compared to 2009. This decrease was primarily in Canada, Europe, Asia and South America. Parts sales for the Asphalt Group increased 5.7% in 2010.
Aggregate and Mining Group: Sales in this group were $256,400,000 in 2010 compared to $218,332,000 in 2009, an increase of $38,068,000 or 17.4%. Domestic sales for the Aggregate and Mining Group increased 13.7% in 2010 compared to 2009. Domestic sales increased due to a slight recovery during 2010 over an extremely weak 2009. This group also introduced several new products in the domestic market during 2010. International sales for the Aggregate and Mining Group increased 17.4% in 2010 compared to 2009. This increase was due to strong international mining growth as well as strengthening international construction markets. The increase in international sales occurred primarily in South America, Canada and Africa. Parts sales for the Aggregate and Mining Group increased 22.4% in 2010 compared to 2009.
Mobile Asphalt Paving Group: Sales in this group were $166,436,000 in 2010 compared to $136,836,000 in 2009, an increase of $29,600,000 or 21.6%. Domestic sales for the Mobile Asphalt Paving Group increased 16.5% in 2010 over 2009. The Company believes this segment was also the beneficiary of federal stimulus spending under the ARRA of 2009. International sales for the Mobile Asphalt Paving Group increased 48.8% in 2010 compared to 2009. International sales for this group increased due to increased efforts to market products internationally as well as a weak dollar. The increase internationally occurred primarily in Canada, Central America and Europe. Parts sales for this group increased 9.5% in 2010.
Underground Group: Sales in this group were $60,105,000 in 2010 compared to $67,353,000 in 2009, a decrease of $7,248,000 or 10.8%. Domestic sales for the Underground Group decreased 7.4% in 2010 compared to 2009. The primary reason for this decline is the weak domestic residential and commercial construction markets. International sales for the Underground Group decreased 13.64% in 2010 compared to 2009. The decrease in international sales occurred in Canada, Africa, and the Middle East. Parts sales for the Underground Group decreased 3.3% in 2010.
Other Group: Sales for the Other Group were $61,975,000 in 2010 compared to $57,046,000 in 2009, an increase of $4,929,000 or 8.6%. Domestic sales for the Other Group, which are generated by Peterson Pacific Corp., increased 20.3% in 2010 compared to 2009. This increase is due to a slight improvement in 2010 compared to a very weak domestic construction market in 2009. International sales for the Other Group remained flat in 2010 over 2009. Parts sales for the Other Group increased 5.4% in 2010.
Segment Profit (Loss) (in thousands)
|
|
2010
|
|
|
2009
|
|
|
$ Change
|
|
|
% Change
|
|
Asphalt Group
|
|
$ |
28,672 |
|
|
$ |
33,455 |
|
|
$ |
(4,783 |
) |
|
|
(14.3 |
%) |
Aggregate and Mining Group
|
|
|
16,578 |
|
|
|
(172 |
) |
|
|
16,750 |
|
|
|
9,738.4 |
% |
Mobile Asphalt Paving Group
|
|
|
23,234 |
|
|
|
13,374 |
|
|
|
9,860 |
|
|
|
73.7 |
% |
Underground Group
|
|
|
(8,092 |
) |
|
|
(14,560 |
) |
|
|
6,468 |
|
|
|
44.4 |
% |
Other Group
|
|
|
(27,138 |
) |
|
|
(29,614 |
) |
|
|
2,476 |
|
|
|
8.4 |
% |
Asphalt Group: Profit for this group was $28,672,000 for 2010 compared to $33,455,000 for 2009, a decrease of $4,783,000 or 14.3%. The primary reason for the decline in profit is a $7,327,000 reduction in gross profit for this group which was driven almost exclusively by the reduction of $32,108,000 in group sales from 2009 to 2010. Offsetting the negative impact of reduced sales on gross profit was a decrease in unabsorbed overhead of $2,078,000 during 2010 compared to 2009 due to increased efficiency in plant utilization.
Aggregate and Mining Group: Profit for this group was $16,578,000 in 2010 compared to a loss of $172,000 in 2009, an increase of $16,750,000. The group incurred a pre-tax intangible asset impairment charge of $10,909,000 which is reflected in intangible asset impairment charges in the consolidated statement of operations for 2009. Not considering this impairment charge, the increase in group profit from 2009 to 2010 would have been $8,274,000 after tax. This group had an increase of $14,232,000 in gross profit during 2010 which was driven by the $38,068,000 increase in sales and a decrease in unabsorbed overhead of $7,069,000 during 2010 due to increased efficiency in plant utilization. This gross profit increase was offset by an increase in selling, general and administrative expenses and research and development expenses of $4,802,000 including payroll related expenses, travel expense and sales commissions expense.
Mobile Asphalt Paving Group: Profit for this group was $23,234,000 in 2010 compared to profit of $13,374,000 in 2009, an increase of $9,860,000 or 73.7%. This group had an increase of $12,924,000 in gross profit during 2010 driven by the $29,600,000 increase in sales. Also positively affecting gross profit was a decrease in unabsorbed overhead of $937,000 during 2010 compared to 2009. This group had an increase in selling, general and administrative expenses of $2,054,000 primarily driven by payroll related expenses, travel expense and sales commission expense.
Underground Group: This group had a loss of $8,092,000 in 2010 compared to a loss of $14,560,000 in 2009 for an improvement of $6,468,000 or 44.4%. Although sales for this group decreased $7,248,000 or 10.8%, gross profit for this group increased $1,938,000 in 2010 compared to 2009, primarily due to reductions in manufacturing overhead and payroll related expenses. Selling, general and administrative expenses decreased $3,514,000 due primarily to reductions in payroll related expenses, bad debt expense and exhibit expense.
Other Group: The Other Group had a loss of $27,138,000 in 2010 compared to a loss of $29,614,000 in 2009, an improvement of $2,476,000 or 8.4%. During 2009, this group incurred a pre-tax intangible asset impairment charge of $5,841,000. Not considering this charge, the group showed an increase in the loss incurred of $3,801,000 after tax. Gross profit for this group increased $4,853,000 or 58.0% year over year due in part to increased sales for this group as well as increased gross margins on those sales compared to 2009. The profit in this group is also significantly impacted by U.S. federal income tax expense which is recorded at the parent company only. Income tax expense in this group increased $3,898,000 in 2010 compared to 2009.
Results of Operations: 2009 vs. 2008
Net Sales
Net sales decreased $235,606,000 or 24.2%, from $973,700,000 in 2008 to $738,094,000 in 2009. Sales are generated primarily from new equipment purchases made by customers for use in construction for privately funded infrastructure and public sector spending on infrastructure. The overall decline in sales for 2009 compared to 2008 is reflective of the weak overall economic conditions, both domestic and international.
Domestic sales for 2009 were $465,473,000 or 63.1% of consolidated net sales compared to $620,987,000 or 63.8% of consolidated net sales for 2008, a decrease of $155,514,000 or 25.0%.
International sales for 2009 were $272,621,000 or 36.9% of consolidated net sales compared to $352,713,000 or 36.2% of consolidated net sales for 2008, a decrease of $80,092,000 or 22.7%. The overall decrease in international sales for 2009 compared to 2008 is due to weak economic conditions in the international markets the company serves as well as volatility in the U.S. dollar during 2009.
Parts sales as a percentage of consolidated net sales increased 340 basis points from 21.0% in 2008 to 24.4% in 2009. In dollar terms, parts sales decreased 12.0% from $204,912,000 in 2008 to $180,332,000 in 2009.
Gross Profit
Consolidated gross profit as a percentage of sales decreased 330 basis points to 20.7% in 2009 from 24.0% in 2008. The primary reason for the overall decrease in gross margin as a percent of sales is reduced plant utilization due to lower production volumes resulting from weak domestic and foreign economies. In addition, the Company has experienced some pricing pressures in certain markets, further impacting gross margin.
Selling, General and Administrative Expense
Selling, general and administrative expenses for 2009 were $107,455,000, or 14.6% of net sales, compared to $122,621,000, or 12.6% of net sales, for 2008, a decrease of $15,166,000, or 12.4%. The decrease was primarily due to a reduction in payroll and related expenses of $4,387,000 resulting from a reduction of 10.2% in employee headcount during 2009. In addition, profit sharing expense decreased $4,207,000 due to a reduction in subsidiary performance which determines this formula-driven amount. In 2008, the Company incurred expenses related to the triennial ConExpo trade show of $3,631,000 which were not incurred in 2009. Commission expense decreased $3,506,000 and travel expense decreased $1,729,000.
Research and Development
Research and Development expenses decreased $892,000 or 4.7%, from $18,921,000 in 2008 to $18,029,000 in 2009. Although sales decreased 24.2% during 2009, the Company remained committed to new product development and current product improvement.
Intangible Asset Impairment Charges
During the fourth quarter of 2009, the Company recorded non-cash intangible asset impairment charges of $17,036,000. These charges consisted of an impairment charge to goodwill of $16,716,000 and an impairment charge to other intangible assets of $320,000. These impairment charges were the result of the Company’s annual intangible asset impairment review in the fourth quarter.
Interest Expense
Interest expense in 2009 decreased $314,000, or 36.9%, to $537,000 from $851,000 in 2008. The decrease in interest expense in 2009 compared to 2008 related primarily to interest on state tax settlements incurred in 2008.
Interest Income
Interest income decreased $154,000 or 17.3% from $888,000 in 2008 to $734,000 in 2009. The primary reason for the decrease in interest income is a decrease in amounts invested in 2009 due to cash paid for acquisitions in late 2008.
Other Income (Expense), Net
Other income (expense), net was $1,137,000 in 2009 compared to $6,255,000 in 2008, a decrease of $5,118,000. The primary reason for the decrease was a gain of $6,195,000 recognized in 2008 on the sale of certain equity securities. The primary component of the current year income amount is $615,000 of investment income from the investment portfolio at Astec Insurance.
Income Tax
Income tax expense for 2009 was $8,135,000, compared to income tax expense of $34,766,000 for 2008. The effective tax rates for 2009 and 2008 were 72.4% and 35.5%, respectively. The primary reason for the significant increase in the effective tax rate from 2008 to 2009 is intangible asset impairment charges in 2009 that were not fully deductible.
Net Income Attributable To Controlling Interest
The Company had net income attributable to controlling interest of $3,068,000 in 2009 compared to $63,128,000 in 2008, a decrease of $60,060,000, or 95.1%. Earnings per diluted share were $0.14 in 2009 compared to $2.80 in 2008, a decrease of $2.66 or 95.0%. Diluted shares outstanding at December 31, 2009 and 2008 were 22,715,780 and 22,585,775, respectively. The increase in shares outstanding is primarily due to the exercise of stock options by employees of the Company.
Backlog
The backlog of orders at December 31, 2009 was $135,090,000 compared to $193,316,000 at December 31, 2008, a decrease of $58,226,000, or 30.1%. The decrease in the backlog of orders was almost evenly split between a decrease in domestic backlog of $32,775,000 or 31.0% and a decrease in international backlog of $25,451,000 or 29.0%. The decrease in backlog occurred in each of the Company’s segments except for the Mobile Asphalt Paving Group which experienced an increase in backlog of $754,000 or 26.4%. The Company is unable to determine whether the decline in backlogs was experienced by the industry as a whole; however, the Company believes the decreased backlog reflects the current economic conditions the industry is experiencing.
Net Sales by Segment (in thousands)
|
|
2009
|
|
|
2008
|
|
|
$ Change
|
|
|
% Change
|
|
Asphalt Group
|
|
$ |
258,527 |
|
|
$ |
257,336 |
|
|
$ |
1,191 |
|
|
|
0.5 |
% |
Aggregate and Mining Group
|
|
|
218,332 |
|
|
|
350,350 |
|
|
|
(132,018 |
) |
|
|
(37.7 |
%) |
Mobile Asphalt Paving Group
|
|
|
136,836 |
|
|
|
150,692 |
|
|
|
(13,856 |
) |
|
|
(9.2 |
%) |
Underground Group
|
|
|
67,353 |
|
|
|
135,152 |
|
|
|
(67,799 |
) |
|
|
(50.2 |
%) |
Other Group
|
|
|
57,046 |
|
|
|
80,170 |
|
|
|
(23,124 |
) |
|
|
(28.8 |
%) |
Asphalt Group: Sales in this group remained relatively flat at $258,527,000 in 2009 compared to $257,336,000 in 2008, an increase of $1,191,000. Domestic sales for the Asphalt Group decreased 7.8% in 2009 compared to 2008. The Company believes this segment was the beneficiary of federal stimulus spending under the ARRA of 2009, which provided $27.5 billion of funding for transportation construction projects. International sales for the Asphalt Group increased 15.8% in 2009 compared to 2008. This increase was primarily in Canada and the Middle East. Parts sales for the Asphalt Group increased 4.7% in 2009.
Aggregate and Mining Group: Sales in this group were $218,332,000 in 2009 compared to $350,350,000 in 2008, a decrease of $132,018,000 or 37.7%. Domestic sales for the Aggregate and Mining Group decreased 37.6% in 2009 compared to 2008. The primary driver of this decrease was the weak domestic residential and commercial construction markets during 2009. International sales for the Aggregate and Mining Group decreased 34.0% in 2009 compared to 2008. This decrease was also due to weakness in the construction market globally. The decrease in international sales occurred primarily in Asia, Canada, Africa and the Middle East. Parts sales for the Aggregate and Mining Group decreased 21.1% in 2009 compared to 2008.
Mobile Asphalt Paving Group: Sales in this group were $136,836,000 in 2009 compared to $150,692,000 in 2008, a decrease of $13,856,000 or 9.2%. Domestic sales for the Mobile Asphalt Paving Group increased 2.0% in 2009 over 2008. The Company believes this segment was also the beneficiary of federal stimulus spending under the ARRA of 2009. International sales for the Mobile Asphalt Paving Group decreased 37.3% in 2009 compared to 2008. The decrease internationally occurred primarily in Europe and Australia but was offset by an increase in Canada, which also passed stimulus spending legislation that benefited the transportation industry. Parts sales for this group increased 2.7% in 2009.
Underground Group: Sales in this group were $67,353,000 in 2009 compared to $135,152,000 in 2008, a decrease of $67,799,000 or 50.2%. Domestic sales for the Underground Group decreased 61.8% in 2009 compared to 2008. The primary reason for this decline is the weak domestic residential and commercial construction markets. International sales for the Underground Group decreased 35.8% in 2009 compared to 2008. The decrease in international sales occurred in Asia, Australia, Europe, South America, Central America and the Middle East. Parts sales for the Underground Group decreased 32.4% in 2009.
Other Group: Sales for the Other Group were $57,046,000 in 2009 compared to $80,170,000 in 2008, a decrease of $23,124,000 or 28.8%. Domestic sales for the Other Group, which are generated by Peterson Pacific Corp. for this group, decreased 51.5% in 2009 compared to 2008. This decrease is due to the weak domestic construction market. International sales for the Other Group increased 19.0% in 2009 over 2008. This increase occurred primarily in Australia due to the acquisition of Astec Australia in the fourth quarter of 2008. This increase was partially offset by a decrease in sales to Canada. Parts sales for the Other Group increased 5.3% in 2009.
Segment Profit (Loss) (in thousands)
|
|
2009
|
|
|
2008
|
|
|
$ Change
|
|
|
% Change
|
|
Asphalt Group
|
|
$ |
33,455 |
|
|
$ |
40,765 |
|
|
$ |
(7,310 |
) |
|
|
(17.9 |
%) |
Aggregate and Mining Group
|
|
|
(172 |
) |
|
|
37,032 |
|
|
|
(37,204 |
) |
|
|
(100.5 |
%) |
Mobile Asphalt Paving Group
|
|
|
13,374 |
|
|
|
15,087 |
|
|
|
(1,713 |
) |
|
|
(11.4 |
%) |
Underground Group
|
|
|
(14,560 |
) |
|
|
12,510 |
|
|
|
(27,070 |
) |
|
|
(216.4 |
%) |
Other Group
|
|
|
(29,614 |
) |
|
|
(41,153 |
) |
|
|
11,539 |
|
|
|
28.0 |
% |
Asphalt Group: Profit for this group was $33,455,000 for 2009 compared to $40,765,000 for 2008, a decrease of $7,310,000 or 17.9%. The primary reason for the decline in profit is a $4,095,000 reduction in gross profit for this group. Although the Asphalt Group’s sales for 2009 were practically the same as 2008, its capacity increased significantly in late 2008 with the addition of Dillman resulting in an increase in unabsorbed overhead of $3,504,000 in 2009 over 2008 levels. Increased research and development expense of $2,171,000, due to the development in 2009 of a new concrete plant, also contributed to the decrease in profit in 2009.
Aggregate and Mining Group: This group had a loss of $172,000 in 2009 compared to profit of $37,032,000 in 2008, a decrease of $37,204,000 or 100.5%. This group had a decrease of $36,483,000 in gross profit during 2009 from the significant drop in sales. Also affecting gross profit was an increase in unabsorbed overhead of $3,754,000 during 2009. The group incurred an intangible asset impairment charge of $10,909,000 which is reflected in intangible asset impairment charges in the consolidated statement of operations for 2009.
Mobile Asphalt Paving Group: Profit for this group was $13,374,000 in 2009 compared to profit of $15,087,000 in 2008, a decrease of $1,713,000 or 11.4%. The primary reason for the decrease in profit is a reduction in sales of 9.2% during 2009. This resulted in an increase in unabsorbed overhead of $1,608,000 year over year.
Underground Group: This group had a loss of $14,560,000 in 2009 compared to profit of $12,510,000 in 2008 for a decrease of $27,070,000 or 216.4%. Gross profit for this group decreased $29,601,000 in 2009, primarily due to the 50.2% decrease in sales year over year. The Underground Group’s gross profit was also negatively impacted by an increase in unabsorbed overhead of $2,625,000 in 2009 compared to 2008. Charges to reduce the value of inventory in 2009 were $2,339,000 in excess of 2008 levels. These expenses were offset by a reduction in selling, general and administrative expenses of $2,000,000 in 2009.
Other Group: The Other Group had a loss of $29,614,000 in 2009 compared to a loss of $41,153,000 in 2008, an improvement of $11,539,000 or 28%. The profit in this group is significantly impacted by U.S. federal income tax expense which is recorded at the parent company only. Income tax expense in this group decreased $21,132,000 in 2009 compared to 2008. Gross profit for this group decreased $6,535,000 in 2009 compared to 2008. This was a result of the decrease in sales of $23,124,000 in this group. The decrease in sales was partially offset by a decrease in unabsorbed overhead of $1,219,000 in 2009 compared to 2008. In addition, this segment incurred non-cash intangible asset impairment charges of $5,841,000 in 2009 which is reflected in intangible asset impairment charges in the consolidated statement of operations.
Liquidity and Capital Resources
The Company’s primary sources of liquidity and capital resources are its cash on hand, investments, borrowing capacity under a $100 million revolving credit facility and cash flows from operations. The Company had $94,597,000 of cash available for operating purposes at December 31, 2010. In addition, the Company had no borrowings outstanding under its credit facility with Wells Fargo Bank, N.A. (“Wells Fargo”) at any time during the year ended December 31, 2010. Net of letters of credit of $7,557,000, the Company had borrowing availability of $92,443,000 under the credit facility.
During April 2007, the Company entered into an unsecured credit agreement with Wachovia Bank, National Association (“Wachovia”) whereby Wachovia has extended to the Company an unsecured line of credit of up to $100,000,000 including a sub-limit for letters of credit of up to $15,000,000. Wachovia has subsequently been acquired by Wells Fargo and the credit agreement is now with this financial institution.
The Wells Fargo credit facility had an original term of three years with two one-year extensions available. Early in 2010, the Company exercised the final extension bringing the new loan maturity date to May 2012. The interest rate for borrowings is a function of the Adjusted LIBOR Rate or Adjusted LIBOR Market Index Rate, as defined, as elected by the Company, plus a margin based upon a leverage ratio pricing grid ranging between 0.5% and 1.5%. As of December 31, 2010, the applicable margin based upon the leverage ratio pricing grid was equal to 0.5%. The unused facility fee is 0.125%. The Wells Fargo credit facility requires no principal amortization and interest only payments are due, in the case of loans bearing interest at the Adjusted LIBOR Market Index Rate, monthly in arrears and, in the case of loans bearing interest at the Adjusted LIBOR Rate, at the end of the applicable interest period. The interest rate was 0.76% and 0.73% at December 31, 2010 and 2009, respectively. The Wells Fargo credit agreement contains certain financial covenants including a minimum fixed charge coverage ratio, minimum tangible net worth and maximum allowed capital expenditures. The Company was in compliance with the covenants under its credit facility as of December 31, 2010.
The Company’s South African subsidiary, Osborn Engineered Products SA (Pty) Ltd, (“Osborn”) has available a credit facility of $9,046,000 (ZAR 60,000,000) to finance short-term working capital needs, as well as to cover performance letters of credit, advance payment and retention guarantees. As of December 31, 2010, Osborn had no outstanding borrowings under the credit facility, but $3,910,000 in performance, advance payment and retention guarantees were issued under the facility. The facility is secured by Osborn’s buildings and improvements, accounts receivable and cash balances (cash balances up to $3,015,000) and a $2,000,000 letter of credit issued by the parent Company. As of December 31, 2010, Osborn had available credit under the facility of $5,136,000. The facility has an ongoing, indefinite term subject to annual reviews by the bank. The interest rate is the South Africa prime rate which was 9.00% and 10.50% at December 31, 2010 and 2009, respectively. The unused facility fee is 0.793%.
The Company’s Australian subsidiary, Astec Australia Pty Ltd (“Astec Australia”) has an available credit facility to finance short-term working capital needs of $813,000 (AUD 800,000) and banking arrangements to finance foreign exchange dealer limit orders of up to $1,677,000 (AUD 1,650,000), secured by cash balances in the amount of $762,000 (AUD 750,000) and a $1,000,000 letter of credit issued by the parent Company. No amounts were outstanding under the credit facilities at December 31, 2010. The interest rate is the Australian adjusted Bank Business Rate plus a margin of 1.05%. The interest rate was 12.46% and 11.21% at December 31, 2010 and 2009, respectively.
Cash Flows from Operating Activities (in thousands):
|
|
2010
|
|
|
2009
|
|
|
Increase /
Decrease
|
|
Net income
|
|
$ |
32,572 |
|
|
$ |
3,106 |
|
|
$ |
29,466 |
|
Adjustments:
|
|
|
|
|
|
|
|
|
|
|
|
|
Provision for warranty
|
|
|
13,365 |
|
|
|
10,908 |
|
|
|
2,457 |
|
Intangible asset impairment charges
|
|
|
-- |
|
|
|
17,036 |
|
|
|
(17,036 |
) |
Sale / purchase of trading securities, net
|
|
|
946 |
|
|
|
(2,513 |
) |
|
|
3,459 |
|
Other, net
|
|
|
25,825 |
|
|
|
25,410 |
|
|
|
415 |
|
Changes in working capital:
|
|
|
|
|
|
|
|
|
|
|
|
|
(Increase) decrease in receivables
|
|
|
(11,911 |
) |
|
|
8,171 |
|
|
|
(20,082 |
) |
(Increase) decrease in inventories
|
|
|
(7,373 |
) |
|
|
36,570 |
|
|
|
(43,943 |
) |
(Increase) decrease in prepaid expenses
|
|
|
5,532 |
|
|
|
(698 |
) |
|
|
6,230 |
|
Increase (decrease) in accounts payable
|
|
|
7,351 |
|
|
|
(16,124 |
) |
|
|
23,475 |
|
Increase (decrease) in customer deposits
|
|
|
8,328 |
|
|
|
(15,938 |
) |
|
|
24,266 |
|
Increase (decrease) in other accrued liabilities
|
|
|
2,267 |
|
|
|
(2,667 |
) |
|
|
4,934 |
|
Other, net
|
|
|
(14,866 |
) |
|
|
(14,060 |
) |
|
|
(806 |
) |
Net cash provided by operating activities
|
|
$ |
62,036 |
|
|
$ |
49,201 |
|
|
$ |
12,835 |
|
Net cash provided by operating activities increased $12,835,000 in 2010 compared to 2009. The primary reasons for the increase in operating cash flows are increases in cash provided by net income of $29,466,000, customer deposits of $24,266,000, accounts payable of $23,475,000, prepaid expenses of $6,230,000 and other accrued liabilities of $4,934,000. These positive cash changes were offset by increases in cash used to fund increases in receivables of $20,082,000 and inventory of $43,943,000. These changes in operating cash flows reflect increased sales and production activity during 2010 compared to 2009 as well as planned inventory purchases made to fulfill the Company’s backlog which was 60.4% higher at December 31, 2010 compared to December 31, 2009.
Cash Flows from Investing Activities (in thousands):
|
|
2010
|
|
|
2009
|
|
|
Increase /
Decrease
|
|
Expenditures for property and equipment
|
|
$ |
(11,336 |
) |
|
$ |
(17,463 |
) |
|
$ |
6,127 |
|
Other, net
|
|
|
202 |
|
|
|
(192 |
) |
|
|
394 |
|
Net cash used by investing activities
|
|
$ |
(11,134 |
) |
|
$ |
(17,655 |
) |
|
$ |
(6,521 |
) |
Net cash used by investing activities in 2010 decreased $6,521,000 compared to 2009 due primarily to reductions in cash used for capital expenditures of $6,127,000.
Cash Flows from Financing Activities (in thousands):
|
|
2010
|
|
|
2009
|
|
|
Increase /
Decrease
|
|
Proceeds from issuance of common stock
|
|
$ |
1,431 |
|
|
$ |
880 |
|
|
$ |
551 |
|
Repayments under revolving line of credit
|
|
|
-- |
|
|
|
(3,427 |
) |
|
|
3,427 |
|
Other, net
|
|
|
595 |
|
|
|
(663 |
) |
|
|
1,258 |
|
Net cash (used) provided by financing activities
|
|
$ |
2,026 |
|
|
$ |
(3,210 |
) |
|
$ |
5,236 |
|
Financing activities provided cash of $2,026,000 in 2010 while in 2009 financing activities used cash of $3,210,000 for a net change of $5,236,000. During 2009, the Company repaid the outstanding balance of $3,427,000 that was borrowed against its revolving line of credit during 2008.
Capital expenditures for 2011 are forecasted to total $29,382,000. The Company expects to finance these expenditures using currently available cash balances, internally generated funds and available credit under the Company’s credit facility. Capital expenditures are generally for machinery, equipment and facilities used by the Company in the production of its various products.
The Company believes that its current working capital, cash flows generated from future operations and available capacity under its credit facilities will be sufficient to meet the Company’s working capital and capital expenditure requirements through December 31, 2011.
Financial Condition
The Company’s current assets increased to $447,821,000 at December 31, 2010 from $384,365,000 at December 31, 2009, an increase of $63,456,000, or 16.5%. The increase is primarily attributable to increases in cash and cash equivalents of $54,168,000 and trade receivables of $11,640,000.
The Company’s current liabilities increased $24,119,000 to $130,426,000 at December 31, 2010 from $106,307,000 at December 31, 2009. The increase is primarily attributable to increases in customer deposits of $8,996,000, accounts payable of $8,105,000, other accrued liabilities of $2,895,000 and accrued payroll and related liabilities of $2,790,000. These items increased primarily due to increased production activity resulting from improving sales in 2010 compared to 2009.
Market Risk and Risk Management Policies
The Company is exposed to changes in interest rates, primarily from its revolving credit agreements. A hypothetical 100 basis point adverse move (increase) in interest rates would not have materially affected interest expense for the year ended December 31, 2010, since there were only minimal amounts outstanding on the revolving credit agreements during the year. The Company does not hedge variable interest.
The Company is subject to foreign exchange risk at its foreign operations. Foreign operations represent 12.8% and 11.1% of total assets at December 31, 2010 and 2009, respectively, and 11.2% and 10.4% of total revenue for the years ended December 31, 2010 and 2009, respectively. Each period the Company’s balance sheets and related results of operations are translated from their functional foreign currency into U.S. dollars for reporting purposes. As the dollar strengthens against those foreign currencies, the foreign denominated net assets and operating results become less valuable in the Company’s reporting currency. When the dollar weakens against those currencies the foreign denominated net assets and operating results become more valuable in the Company’s reporting currency. At each reporting date, the fluctuation in the value of the net assets and operating results due to foreign exchange rate changes is recorded as an adjustment to other comprehensive income in equity. The Company views its investments in foreign subsidiaries as long-term and does not hedge the net investments in foreign subsidiaries.
From time to time the Company’s foreign subsidiaries enter into transactions not denominated in their functional currency. In these situations, the Company evaluates the need to hedge those transactions against foreign currency rate fluctuations. When the Company determines a need to hedge a transaction, the subsidiary enters into a foreign currency exchange contract. The Company does not apply hedge accounting to these contracts and, therefore, recognizes the fair value of these contracts in the consolidated balance sheets and the change in the fair value of the contracts in current earnings.
Due to the limited exposure to foreign exchange rate risk, a 10% fluctuation in the foreign exchange rates at December 31, 2010 or 2009 would not have a material impact on the Company’s consolidated financial statements.
Aggregate Contractual Obligations
The following table discloses aggregate information about the Company’s contractual obligations and the period in which payments are due as of December 31, 2010 (in thousands):
|
|
Payments Due by Period
|
|
Contractual Obligations
|
|
Total
|
|
|
Less Than
1 Year
|
|
|
1 to 3 Years
|
|
|
3 to 5 Years
|
|
|
More Than
5 Years
|
|
Operating lease obligations
|
|
$ |
1,833 |
|
|
$ |
1,266 |
|
|
$ |
532 |
|
|
$ |
29 |
|
|
$ |
6 |
|
Inventory purchase obligations
|
|
|
1,548 |
|
|
|
1,457 |
|
|
|
91 |
|
|
|
-- |
|
|
|
-- |
|
Real estate acquisition obligation
|
|
|
4,390 |
|
|
|
4,390 |
|
|
|
-- |
|
|
|
-- |
|
|
|
-- |
|
Total
|
|
$ |
7,771 |
|
|
$ |
7,113 |
|
|
$ |
623 |
|
|
$ |
29 |
|
|
$ |
6 |
|
The above table excludes our liability for unrecognized tax benefits, which totaled $570,000 at December 31, 2010 since we cannot predict with reasonable reliability the timing of cash settlements to the respective taxing authorities.
In 2010, the Company made contributions of approximately $972,000 to its pension plan and $421,000 to its post-retirement benefit plan for a total of $1,393,000, compared to $281,000 in 2009. The Company estimates that it will contribute a total of $433,000 to the pension and post-retirement plans during 2011. The Company’s funding policy for all plans is to make the minimum annual contributions required by applicable regulations.
Contingencies
Management has reviewed all claims and lawsuits and, upon the advice of counsel, has made adequate provision for any losses that can be reasonably estimated. However, the Company is unable to predict the ultimate outcome of the outstanding claims and lawsuits.
Certain customers have financed purchases of the Company’s products through arrangements in which the Company is contingently liable for customer debt and residual value guarantees aggregating $3,037,000 and $4,276,000 at December 31, 2010 and 2009, respectively. These obligations have average remaining terms of 5.25 years. The Company has recorded a liability of $288,000 related to these guarantees at December 31, 2010.
The Company is contingently liable under letters of credit of approximately $11,467,000, primarily for performance guarantees to customers, banks or insurance carriers.
Off-balance Sheet Arrangements
As of December 31, 2010 the Company does not have off-balance sheet arrangements as defined by Item 303(a)(4) of Regulation S-K, except for those items noted above.
Environmental Matters
During 2009, the Company received notice that Johnson Crushers International, Inc. is subject to an enforcement action brought by the U.S. Environmental Protection Agency and the Oregon Department of Environmental Quality related to an alleged failure to comply with federal and state air permitting regulations. Each agency is expected to seek sanctions that will include monetary penalties. No penalty has yet been proposed. The Company believes that it has cured the alleged violations and is cooperating fully with the regulatory agencies. At this stage of the investigations, the Company is unable to predict the outcome and the amount of any such sanctions.
During 2004, the Company has also received notice from the Environmental Protection Agency that it may be responsible for a portion of the costs incurred in connection with an environmental cleanup in Illinois. The discharge of hazardous materials and associated cleanup relate to activities occurring prior to the Company’s acquisition of Barber-Greene in 1986. The Company believes that over 300 other parties have received similar notice. At this time, the Company cannot predict whether the EPA will seek to hold the Company liable for a portion of the cleanup costs or the amount of any such liability.
Critical Accounting Policies
The Company’s consolidated financial statements are prepared in accordance with accounting principles generally accepted in the United States. Application of these principles requires the Company to make estimates and judgments that affect the amounts as reported in the consolidated financial statements. Accounting policies that are critical to aid in understanding and evaluating the results of operations and financial position of the Company include the following:
Inventory Valuation: Inventories are valued at the lower of cost or market. The most significant component of the Company’s inventories is steel. Open market prices, which are subject to volatility, determine the cost of steel for the Company. During periods when open market prices decline, the Company may need to provide a reserve to reduce the carrying value of the inventory. In addition, certain items in inventory become obsolete over time, and the Company establishes a reserve to reduce the carrying value of these items to their net realizable value. The amounts in these inventory reserves are determined by the Company based on estimates, assumptions and judgments made from the information available at that time. Historically, inventory reserves have been sufficient to provide for proper valuation of the Company’s inventory. The Company does not believe it is reasonably likely that the inventory reserves will materially change in the near future.
Self-Insurance Reserves: The Company is insuring the retention portion of workers’ compensation claims and general liability claims by way of a captive insurance company, Astec Insurance Company. The objectives of Astec Insurance are to improve control over and reduce the cost of claims; to improve focus on risk reduction with development of a program structure which rewards proactive loss control; and to ensure active management participation in the defense and settlement process for claims.
For general liability claims, the captive is liable for the first $1.0 million per occurrence and $2.5 million per year in the aggregate. The Company carries general liability, excess liability and umbrella policies for claims in excess of those covered by the captive.
For workers’ compensation claims, the captive is liable for the first $350,000 per occurrence and $4.0 million per year in the aggregate. The Company utilizes a large national insurance company as third-party administrator for workers’ compensation claims and carries insurance coverage for claims liabilities in excess of amounts covered by the captive.
The financial statements of the captive are consolidated into the financial statements of the Company. The short-term and long-term reserves for claims and potential claims related to general liability and workers’ compensation under the captive are included in accrued loss reserves and other long-term liabilities, respectively, in the consolidated balance sheets depending on the expected timing of future payments. The undiscounted reserves are actuarially determined based on the Company’s evaluation of the type and severity of individual claims and historical information, primarily its own claims experience, along with assumptions about future events. Changes in assumptions, as well as changes in actual experience, could cause these estimates to change in the future. However, the Company does not believe it is reasonably likely that the reserve level will materially change in the near future.
At all but one of the Company’s domestic manufacturing subsidiaries, the Company is self-insured for health and prescription claims under its Group Health Insurance Plan. The Company carries reinsurance coverage to limit its exposure for individual health claims above certain limits. Third parties administer health claims and prescription medication claims. The Company maintains a reserve for the self-insured health plan which is included in accrued loss reserves on the Company’s consolidated balance sheets. This reserve includes both unpaid claims and an estimate of claims incurred but not reported, based on historical claims and payment experience. Historically the reserves have been sufficient to provide for claims payments. Changes in actual claims experience, or payment patterns, could cause the reserve to change, but the Company does not believe it is reasonably likely that the reserve level will materially change in the near future.
The remaining U.S. subsidiary is covered under a fully insured group health plan. Employees of the Company’s foreign subsidiaries are insured under health plans in accordance with their local governmental requirements. No reserves are necessary for these fully insured health plans.
Product Warranty Reserve: The Company accrues for the estimated cost of product warranties at the time revenue is recognized. Warranty obligations by product line or model are evaluated based on historical warranty claims experience. For machines, the Company’s standard product warranty terms generally include post-sales support and repairs of products at no additional charge for periods ranging from three months to one year or up to a specified number of hours of operation. For parts from component suppliers, the Company relies on the original manufacturer’s warranty that accompanies those parts. Generally, fabricated parts are not covered by specific warranty terms. Although failure of fabricated parts due to material or workmanship is rare, if it occurs, the Company’s policy is to replace fabricated parts at no additional charge.
The Company engages in extensive product quality programs and processes, including actively monitoring and evaluating the quality of component suppliers. Estimated warranty obligations are based upon warranty terms, product failure rates, repair costs and current period machine shipments. If actual product failure rates, repair costs, service delivery costs or post-sales support costs differ from estimates, revisions to the estimated warranty liability would be required. The Company does not believe it is reasonably likely that the warranty reserve will materially change in the near future.
Pension and Post-retirement Benefits: The determination of obligations and expenses under the Company’s pension and post-retirement benefit plans is dependent on the selection of certain assumptions used by the Company’s independent actuaries in calculating such amounts. Those assumptions are described in Note 12, Pension and Post-retirement Benefits, to the consolidated financial statements and include among others, the discount rate, expected return on plan assets and the expected rates of increase in health care costs. In accordance with accounting principles generally accepted in the United States, actual results that differ from assumptions are accumulated and amortized over future periods and, therefore, generally affect the recognized expense in such periods. The Company has determined that a 1% change in either the discount rate or the rate of return on plan assets would not have a material effect on the financial condition or operating performance of the Company.
Revenue Recognition: Revenue is generally recognized on sales at the point in time when persuasive evidence of an arrangement exists, the price is fixed or determinable, the product has been shipped and there is reasonable assurance of collection of the sales proceeds. The Company generally obtains purchase authorizations from its customers for a specified amount of product at a specified price with specified delivery terms. A significant portion of the Company’s equipment sales represents equipment produced in the Company’s plants under short-term contracts for a specific customer project or equipment designed to meet a customer’s specific requirements. Certain contracts include terms and conditions through which the Company recognizes revenues upon completion of equipment production, which is subsequently stored at the Company’s plant at the customer’s request. In accordance with U.S. GAAP, revenue is recorded on such contracts upon the customer’s assumption of title and risk of ownership and when collectability is reasonably assured. In addition, there must be a fixed schedule of delivery of the goods consistent with the customer’s business practices, the Company must not have retained any specific performance obligations such that the earnings process is not complete and the goods must have been segregated from the Company’s inventory prior to revenue recognition.
The Company has certain sales accounted for as multiple-element arrangements, whereby related revenue on each product is recognized when it is shipped, and the related service revenue is recognized when the service is performed. The Company evaluates sales with multiple deliverable elements (such as an agreement to deliver equipment and related installation services) to determine whether revenue related to individual elements should be recognized separately, or as a combined unit. In addition to the previously mentioned general revenue recognition criteria, the Company only recognizes revenue on individual delivered elements when there is objective and reliable evidence that the delivered element has a determinable value to the customer on a standalone basis and there is no right of return.
Goodwill and Other Intangible Assets: In accordance with U.S. GAAP, intangible assets are classified into three categories: (1) intangible assets with definite lives subject to amortization, (2) intangible assets with indefinite lives not subject to amortization, and (3) goodwill. Intangible assets with definite lives are tested for impairment if conditions exist that indicate the carrying value may not be recoverable. Such conditions may include an economic downturn in a geographic market or a change in the assessment of future operations. An impairment charge is recorded when the carrying value of the definite lived intangible asset is not recoverable by the cash flows generated from the use of the asset. Some of the inputs used in the impairment testing are highly subjective and are affected by changes in business factors and other conditions. Changes in any of the inputs could have an effect on future tests and result in impairment charges.
Intangible assets with indefinite lives and goodwill are not amortized. Intangible assets and goodwill are tested for impairment annually or more frequently if events or circumstances indicate that such intangible assets or goodwill might be impaired. The impairment tests of goodwill are performed at the reporting unit level. The Company’s reporting units are defined as its subsidiaries because each is a legal entity that is managed separately and manufactures and distributes distinct product lines. Such impairment tests for goodwill include comparing the fair value of the respective reporting unit with its carrying value, including goodwill. A variety of methodologies are used in conducting these impairment tests, including discounted cash flow analyses and market analyses. When the fair value is less than the carrying value of the intangible assets or the reporting unit, an impairment charge is recorded to reduce the carrying value of the assets to fair value.
The useful lives of identifiable intangible assets are determined after considering the specific facts and circumstances related to each intangible asset. Factors considered when determining useful lives include the contractual term of any agreement, the history of the asset, the Company’s long-term strategy for the use of the asset, any laws or other local regulations which could impact the useful life of the asset, and other economic factors, including competition and specific market conditions. Intangible assets that are deemed to have definite lives are amortized, generally on a straight-line basis, over their useful lives, ranging from 3 to 15 years.
Income Taxes: Income taxes are based on pre-tax financial accounting income. Deferred tax assets and liabilities are recognized for the expected tax consequences of temporary differences between the tax bases of assets and liabilities and their reported amounts. The Company periodically assesses the need to establish a valuation allowance against its deferred tax assets to the extent the Company no longer believes it is more likely than not that the tax assets will be fully utilized. These valuation allowances can be impacted by changes in tax laws, changes to statutory tax rates, and future taxable income levels and are based on the Company’s judgment, estimates, and assumptions regarding those future events. In the event the Company were to determine that it would not be able to realize all or a portion of deferred tax assets in the future, the Company would increase the valuation allowance through a charge to income tax expense in the period that such determination is made. Conversely, if the Company were to determine that it would be able to realize its deferred tax assets in the future, in excess of the net carrying amounts, the Company would decrease the recorded valuation allowance through decrease to income tax expense in the period that such determination is made.
The Company evaluates a tax position to determine whether it is more likely than not that the tax position will be sustained upon examination, based upon the technical merits of the position. A tax position that meets the more-likely-than-not recognition threshold is subject to a measurement assessment to determine the amount of benefit to recognize in the consolidated statements of operations and the appropriate reserve to establish, if any. If a tax position does not meet the more-likely-than-not recognition threshold, no benefit is recognized. The Company is audited by U.S. federal and state as well as foreign tax authorities. While it is often difficult to predict final outcome or timing of resolution of any particular tax matter, the Company believes its reserve for uncertain tax positions is properly recorded pursuant to the recognition and measurement provisions in the FASB guidance.
Stock-based Compensation: The Company currently has two types of stock-based compensation plans in effect for its employees and directors. The Company’s stock option plans have been in effect for a number of years and its stock incentive plan was put in place during 2006. These plans are more fully described in Note 16, Shareholders' Equity, to the consolidated financial statements. Restricted stock units (“RSU’s”) awarded under the Company’s stock incentive plan are granted shortly after the end of each year and are based upon the performance of the Company and its individual subsidiaries. RSU’s can be earned for performance in each of the years from 2006 through 2010 with additional RSU’s available based upon cumulative five-year performance. The Company estimates the number of shares that will be granted for the most recent fiscal year and the five-year cumulative performance based on actual and expected future operating results. The compensation expense for RSU’s expected to be granted for the most recent fiscal year and the cumulative five-year based awards is calculated using the fair value of the Company stock at each period end and is adjusted to the fair value as of each future period end until granted. Generally, each award will vest at the end of five years from the date of grant, or at a time the recipient retires after reaching age 65. Estimated forfeitures are based upon the expected turnover rates of the employees receiving awards under the plan. The fair value of stock options is estimated using the Black-Scholes method.
Fair Value: For cash and cash equivalents, trade receivables, other receivables, revolving debt and accounts payable, the carrying amount approximates the fair value because of the short-term nature of those instruments. Investments are carried at their fair value based on quoted market prices for identical or similar assets or, where no quoted prices exist, other observable inputs for the asset. All of the investments held by the Company at December 31, 2010 and 2009 are classified as Level 1 or Level 2 under the fair value hierarchy.
Recent Accounting Pronouncements
There are no recently promulgated accounting pronouncements (either recently adopted or yet to be adopted) that are likely to have a material impact on the Company’s financial reporting in the foreseeable future. See Note 1, Summary of Significant Accounting Policies, to the consolidated financial statements.
Forward-Looking Statements
This annual report contains forward-looking statements made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Statements contained anywhere in this Annual Report that are not limited to historical information are considered forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934, including, without limitation, statements regarding:
|
•
|
execution of the Company’s growth and operation strategy;
|
|
•
|
compliance with covenants in the Company’s credit facilities;
|
|
•
|
liquidity and capital expenditures;
|
|
•
|
sufficiency of working capital, cash flows and available capacity under the Company’s credit facilities;
|
|
•
|
government funding and growth of highway construction and commercial projects;
|
|
•
|
pricing and availability of oil and liquid asphalt;
|
|
•
|
pricing and availability of steel;
|
|
•
|
pricing of scrap metal;
|
|
•
|
condition of the economy;
|
|
•
|
the success of new product lines;
|
|
•
|
plans for technological innovation;
|
|
•
|
ability to secure adequate or timely replacement of financing to repay our lenders;
|
|
•
|
compliance with government regulations;
|
|
•
|
compliance with manufacturing or delivery timetables;
|
|
•
|
forecasting of results;
|
|
•
|
general economic trends and political uncertainty;
|
|
•
|
integration of acquisitions;
|
|
•
|
presence in the international marketplace;
|
|
•
|
suitability of our current facilities;
|
|
•
|
future payment of dividends;
|
|
•
|
competition in our business segments;
|
|
•
|
product liability and other claims;
|
|
•
|
protection of proprietary technology;
|
|
•
|
future fillings of backlogs;
|
|
•
|
the impact of accounting changes;
|
|
•
|
the effect of international sales on our backlog;
|
|
•
|
critical account policies;
|
|
•
|
ability to satisfy contingencies;
|
|
•
|
contributions to retirement plans;
|
|
•
|
supply of raw materials; and
|
These forward-looking statements are based largely on management’s expectations, which are subject to a number of known and unknown risks, uncertainties and other factors discussed in this report and in documents filed by the Company with the Securities and Exchange Commission, which may cause actual results, financial or otherwise, to be materially different from those anticipated, expressed or implied by the forward-looking statements. All forward-looking statements included in this document are based on information available to the Company on the date hereof, and the Company assumes no obligation to update any such forward-looking statements to reflect future events or circumstances. You can identify these statements by forward-looking words such as “expect”, “believe”, “anticipate”, “goal”, “plan”, “intend”, “estimate”, “may”, “will”, “should” and similar expressions.
In addition to the risks and uncertainties identified elsewhere herein and in documents filed by the Company with the Securities and Exchange Commission, the following factors should be carefully considered when evaluating the Company’s business and future prospects: changes or delays in highway funding; rising interest rates; changes in oil prices; changes in steel prices; changes in the general economy; unexpected capital expenditures and decreases in liquidity; the timing of large contracts; production capacity; general business conditions in the industry; non-compliance with covenants in the Company’s credit facilities; demand for the Company’s products; and those other factors listed from time to time in the Company’s reports filed with the Securities and Exchange Commission. Certain of the risks, uncertainties and other factors discussed or noted above are more fully described in the section entitled “Business - Risk Factors” in the Company’s Annual Report on Form 10-K for the year ended December 31, 2010.
MANAGEMENT’S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING
The management of Astec Industries, Inc. (the “Company”) is responsible for establishing and maintaining adequate internal control over financial reporting for the Company. The Company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with U.S. generally accepted accounting principles. The Company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of assets of the Company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the Company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies and procedures may deteriorate.
Management assessed the effectiveness of the Company’s internal control over financial reporting as of December 31, 2010. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control - Integrated Framework. Based on this assessment management concluded that, as of December 31, 2010, the Company’s internal control over financial reporting was effective.
Ernst & Young LLP, the Company’s independent registered public accounting firm, has issued an attestation report on the Company’s internal control over financial reporting as of December 31, 2010.
Report of Independent Registered Public Accounting Firm
To the Board of Directors and Shareholders
Astec Industries, Inc.
We have audited the accompanying consolidated balance sheets of Astec Industries, Inc. as of December 31, 2010 and 2009 and the related consolidated statements of operations, equity, and cash flows for each of the three years in the period ended December 31, 2010. Our audits also included the financial statement schedule listed in the index at Item 15(a). These financial statements and schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Astec Industries, Inc. at December 31, 2010 and 2009, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2010, in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth therein.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Astec Industries, Inc.’s internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated March 1, 2011 expressed an unqualified opinion thereon.
/s/ Ernst & Young LLP
Chattanooga, Tennessee
March 1, 2011
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors and Shareholders
Astec Industries, Inc.
We have audited Astec Industries, Inc.’s internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). Astec Industries, Inc.’s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
In our opinion, Astec Industries, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2010, based on the COSO criteria.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the 2010 consolidated financial statements of Astec Industries, Inc. and our report dated March 1, 2011 expressed an unqualified opinion thereon.
/s/ Ernst & Young LLP
Chattanooga, Tennessee
March 1, 2011
(in thousands, except shares and share data)
|
|
December 31
|
|
Assets
|
|
2010
|
|
|
2009
|
|
|
|
|
|
|
|
|
Current assets:
|
|
|
|
|
|
|
Cash and cash equivalents
|
|
$ |
94,597 |
|
|
$ |
40,429 |
|
Trade receivables, less allowance for doubtful accounts of
$1,820 in 2010 and $2,215 in 2009
|
|
|
77,978 |
|
|
|
66,338 |
|
Other receivables
|
|
|
2,885 |
|
|
|
1,767 |
|
Inventories
|
|
|
252,981 |
|
|
|
248,548 |
|
Prepaid expenses
|
|
|
7,325 |
|
|
|
12,927 |
|
Deferred income tax assets
|
|
|
10,339 |
|
|
|
12,067 |
|
Other current assets
|
|
|
1,716 |
|
|
|
2,289 |
|
Total current assets
|
|
|
447,821 |
|
|
|
384,365 |
|
Property and equipment, net
|
|
|
168,242 |
|
|
|
172,057 |
|
Investments
|
|
|
11,672 |
|
|
|
11,965 |
|
Goodwill
|
|
|
13,907 |
|
|
|
13,907 |
|
Other long-term assets
|
|
|
7,997 |
|
|
|
8,607 |
|
Total assets
|
|
$ |
649,639 |
|
|
$ |
590,901 |
|
|
|
|
|
|
|
|
|
|
Liabilities and Equity
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Current liabilities:
|
|
|
|
|
|
|
|
|
Accounts payable
|
|
$ |
44,493 |
|
|
$ |
36,388 |
|
Customer deposits
|
|
|
35,602 |
|
|
|
26,606 |
|
Accrued product warranty
|
|
|
9,891 |
|
|
|
8,714 |
|
Accrued payroll and related liabilities
|
|
|
16,121 |
|
|
|
13,331 |
|
Accrued loss reserves
|
|
|
3,796 |
|
|
|
3,640 |
|
Other accrued liabilities
|
|
|
20,523 |
|
|
|
17,628 |
|
Total current liabilities
|
|
|
130,426 |
|
|
|
106,307 |
|
Deferred income tax liabilities
|
|
|
12,653 |
|
|
|
14,975 |
|
Other long-term liabilities
|
|
|
13,754 |
|
|
|
17,359 |
|
Total liabilities
|
|
|
156,833 |
|
|
|
138,641 |
|
|
|
|
|
|
|
|
|
|
Equity:
|
|
|
|
|
|
|
|
|
Preferred stock - authorized 4,000,000 shares of
$1.00 par value; none issued
|
|
|
-- |
|
|
|
-- |
|
Common stock - authorized 40,000,000 shares of
$.20 par value; issued and outstanding -
22,646,822 in 2010 and 22,551,283 in 2009
|
|
|
4,529 |
|
|
|
4,510 |
|
Additional paid-in capital
|
|
|
128,831 |
|
|
|
124,381 |
|
Accumulated other comprehensive income
|
|
|
8,046 |
|
|
|
4,551 |
|
Company shares held by SERP, at cost
|
|
|
(2,217 |
) |
|
|
(2,128 |
) |
Retained earnings
|
|
|
353,019 |
|
|
|
320,589 |
|
Shareholders’ equity
|
|
|
492,208 |
|
|
|
451,903 |
|
Non-controlling interest
|
|
|
598 |
|
|
|
357 |
|
Total equity
|
|
|
492,806 |
|
|
|
452,260 |
|
Total liabilities and equity
|
|
$ |
649,639 |
|
|
$ |
590,901 |
|
See Notes to Consolidated Financial Statements
(in thousands, except shares and share data)
|
|
Year Ended December 31
|
|
|
|
2010
|
|
|
2009
|
|
|
2008
|
|
|
|
|
|
|
|
|
|
|
|
Net sales
|
|
$ |
771,335 |
|
|
$ |
738,094 |
|
|
$ |
973,700 |
|
Cost of sales
|
|
|
592,288 |
|
|
|
585,667 |
|
|
|
740,389 |
|
Gross profit
|
|
|
179,047 |
|
|
|
152,427 |
|
|
|
233,311 |
|
Selling, general and administrative expenses
|
|
|
114,141 |
|
|
|
107,455 |
|
|
|
122,621 |
|
Intangible asset impairment charges
|
|
|
-- |
|
|
|
17,036 |
|
|
|
-- |
|
Research and development expenses
|
|
|
17,482 |
|
|
|
18,029 |
|
|
|
18,921 |
|
Income from operations
|
|
|
47,424 |
|
|
|
9,907 |
|
|
|
91,769 |
|
Other income:
|
|
|
|
|
|
|
|
|
|
|
|
|
Interest expense
|
|
|
352 |
|
|
|
537 |
|
|
|
851 |
|
Interest income
|
|
|
956 |
|
|
|
734 |
|
|
|
888 |
|
Other income (expense), net
|
|
|
675 |
|
|
|
1,137 |
|
|
|
6,255 |
|
Income before income taxes
|
|
|
48,703 |
|
|
|
11,241 |
|
|
|
98,061 |
|
Income taxes
|
|
|
16,131 |
|
|
|
8,135 |
|
|
|
34,766 |
|
Net income
|
|
|
32,572 |
|
|
|
3,106 |
|
|
|
63,295 |
|
Net income attributable to non-controlling interest
|
|
|
142 |
|
|
|
38 |
|
|
|
167 |
|
Net income attributable to controlling interest
|
|
$ |
32,430 |
|
|
$ |
3,068 |
|
|
$ |
63,128 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Earnings per Common Share
|
|
|
|
|
|
|
|
|
|
|
|
|
Net income attributable to controlling interest:
|
|
|
|
|
|
|
|
|
|
|
|
|
Basic
|
|
$ |
1.44 |
|
|
$ |
0.14 |
|
|
$ |
2.83 |
|
Diluted
|
|
|
1.42 |
|
|
|
0.14 |
|
|
|
2.80 |
|
Weighted average number of common shares
outstanding:
|
|
|
|
|
|
|
|
|
|
|
|
|
Basic
|
|
|
22,517,246 |
|
|
|
22,446,940 |
|
|
|
22,287,554 |
|
Diluted
|
|
|
22,829,799 |
|
|
|
22,715,780 |
|
|
|
22,585,775 |
|
See Notes to Consolidated Financial Statements
(in thousands)
|
|
Year Ended December 31
|
|
|
|
2010
|
|
|
2009
|
|
|
2008
|
|
Cash Flows from Operating Activities
|
|
|
|
|
|
|
|
|
|
Net income
|
|
$ |
32,572 |
|
|
$ |
3,106 |
|
|
$ |
63,295 |
|
Adjustments to reconcile net income to net cash
provided by operating activities:
|
|
|
|
|
|
|
|
|
|
|
|
|
Depreciation
|
|
|
18,022 |
|
|
|
17,752 |
|
|
|
16,657 |
|
Amortization
|
|
|
706 |
|
|
|
924 |
|
|
|
686 |
|
Provision (credit) for doubtful accounts
|
|
|
(11 |
) |
|
|
1,023 |
|
|
|
320 |
|
Provision for inventory reserves
|
|
|
5,258 |
|
|
|
4,305 |
|
|
|
4,143 |
|
Provision for warranty
|
|
|
|