Use these links to rapidly review the document
Table of Contents
ITEM 8. CONSOLIDATED FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549

FORM 10-K/A


ý

 

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 FOR THE FISCAL YEAR ENDED DECEMBER 31, 2009

o

 

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission File Number 0-21719

Steel Dynamics, Inc.
(Exact name of registrant as specified in its charter)

Indiana
(State or other jurisdiction of
incorporation or organization)
  35-1929476
(IRS Employer Identification No.)

7575 West Jefferson Blvd, Fort Wayne, IN
(Address of principal executive offices)

 

46804
(Zip Code)

Registrant's telephone number, including area code: (260) 969-3500

          Securities registered pursuant to Section 12(b) of the Act:

Title of each class   Name of each exchange on which registered
Common Stock, $.0025 par value   Nasdaq Global Select Stock Market

          Securities registered pursuant to Section 12(g) of the Act: None

          Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ý    No o

          Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o    No ý

          Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý    No o

          Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ý    No o

          Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K/A or any amendment to this Form 10-K/A. o

          Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of "larger accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.

Large accelerated filer ý   Accelerated filer o   Non-accelerated filer o
(Do not check if a
smaller reporting company)
  Smaller reporting company o

          Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o    No ý

          The aggregate market value of the voting stock held by non-affiliates of the registrant computed by reference to the price at which the common equity was last sold as of June 30, 2009, was approximately, $3,014,728,313. Registrant has no non-voting shares. For purposes of this calculation, shares of common stock held by directors, officers and 5% stockholders known to the registrant have been deemed to be owned by affiliates, but this should not be construed as an admission that any such person possesses the power, direct or indirect, to direct or cause the direction of the management or policies of the registrant or that such person is controlled by or under common control with the registrant.

          As of February 18, 2010, Registrant had outstanding 216,333,971 shares of common stock.

          DOCUMENTS INCORPORATED BY REFERENCE

          Portions of registrant's definitive proxy statement referenced in Part III, Items 10 through 14 of this report, to be filed prior to April 30, 2010, are incorporated herein by reference.


Table of Contents

STEEL DYNAMICS, INC.

Table of Contents

 
   
  Page  

Part I

           
 

Item 1.

 

Business

    2  
 

Item 1A.

 

Risk Factors

    23  
 

Item 1B.

 

Unresolved Staff Comments

    35  
 

Item 2.

 

Properties

    36  
 

Item 3.

 

Legal Proceedings

    37  

Part II

           
 

Item 5.

 

Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

    38  
 

Item 6.

 

Selected Financial Data

    40  
 

Item 7.

 

Management's Discussion and Analysis of Financial Condition and Results or Operation

    42  
 

Item 7A.

 

Quantitative and Qualitative Disclosures About Market Risk

    56  
 

Item 8.

 

Consolidated Financial Statements and Supplementary Data

    58  
 

Item 9.

 

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

    103  
 

Item 9A.

 

Controls and Procedures

    103  
 

Item 9B.

 

Other Information

    103  

Part III

           
 

Item 10.

 

Directors, Executive Officers, and Corporate Governance

    104  
 

Item 11.

 

Executive Compensation

    104  
 

Item 12.

 

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

    104  
 

Item 13.

 

Certain Relationships and Related Transactions, and Director Independence

    105  
 

Item 14.

 

Principal Accounting Fees and Services

    105  

Part IV

           
 

Item 15.

 

Exhibits and Financial Statement Schedules

    105  

Table of Contents


PART I

Preliminary Note

        The sole change reflected in this Amended Form 10-K Annual Report, from our original filing on February 22, 2010, is the numbering of Items 4 through 14 in our February 22, 2010 filing as new Items 5 through 15, respectively, in this amended filing, to conform with that portion of the Securities and Exchange Commission's February 23, 2010 Technical Corrections Release, which removes and reserves Item 4 (Part II—Other Information) and retains the pre-existing numbering system for such items. In all other respects, this Form 10-K Annual Report is identical to our February 22, 2010 filing.

Special Note Regarding Forward-Looking Statements

        Throughout this report, or in other reports or registration statements filed from time to time with the Securities and Exchange Commission under the Securities Exchange Act of 1934, or under the Securities Act of 1933, as well as in documents we incorporate by reference or in press releases or oral statements made by our officers or representatives, we may make statements that express our opinions, expectations, or projections regarding future events or future results, in contrast with statements that reflect historical facts. These predictive statements, which we generally precede or accompany by such typical conditional words as "anticipate," "intend," "believe," "estimate," "plan," "seek," "project" or "expect," or by the words "may," "will," or "should," are intended to operate as "forward looking statements" of the kind permitted by the Private Securities Litigation Reform Act of 1995, incorporated in Section 27A of the Securities Act and Section 21E of the Securities Exchange Act. That legislation protects such predictive statements by creating a "safe harbor" from liability in the event that a particular prediction does not turn out as anticipated.

        While we always intend to express our best judgment when we make statements about what we believe will occur in the future, and although we base these statements on assumptions that we believe to be reasonable when made, these forward looking statements are not a guarantee of performance, and you should not place undue reliance on such statements. Forward looking statements are subject to many uncertainties and other variable circumstances, many of which are outside of our control, that could cause our actual results and experience to differ materially from those we thought would occur.

        The following listing represents some, but not necessarily all, of the factors that may cause actual results to differ from those we may have anticipated or predicted:

1


Table of Contents

        We also refer you to and believe that you should carefully read the "Risk Factors" discussion at Item 1A of this report to better understand the risks and uncertainties inherent in our business or in owning our securities.

        Any forward looking statements which we make in this report or in any of the documents that are incorporated by reference herein speak only as of the date of such statement, and we undertake no ongoing obligation to update such statements. Comparisons of results between current and any prior periods are not intended to express any future trends or indications of future performance, unless expressed as such, and should only be viewed as historical data.

ITEM 1.    BUSINESS

Our Company

        We are one of the largest steel producers and one of the largest metals recyclers in the United States based on a current estimated annual steelmaking capability of 6.3 million tons and actual metals recycling shipping volumes during 2008 and 2009 of 5.6 million tons and 4.1 million tons of ferrous materials, respectively, and 912 million pounds and 780 million pounds of nonferrous metallics, respectively. Our steel production, excluding The Techs, during 2008 and 2009 was 4.8 million tons and 3.5 million tons, respectively. In 2008, we reported net sales of $8.1 billion and an operating margin of 10%, as compared to net sales of $4.0 billion and an operating margin of 3% during 2009. At December 31, 2009, we employed approximately 5,990 individuals, 90% of which are non-union, located at our operations throughout the eastern half of the United States.

2


Table of Contents

        Steel Dynamics, Inc. was incorporated in Indiana in August 1993. Our principal executive offices are located at 7575 W. Jefferson Blvd, Fort Wayne, Indiana 46804, and our telephone number is 260.969.3500.

        The primary sources of our revenues are from the manufacture and sale of steel products; processing and sale of recycled ferrous and nonferrous metals; and to a lesser degree, fabrication and sale of steel joist and decking products. Our operations are managed and reported based on three operating segments: steel operations, metals recycling and ferrous resources operations, and steel fabrication operations.

        Steel Operations.    Steel operations consist of our five electric-arc furnace mini-mills, producing steel from steel scrap, utilizing continuous casting, automated rolling mills, and various downstream finishing facilities, including The Techs operations. Our steel operations accounted for 81% of our consolidated net sales in 2007 and 63% in both 2008 and 2009. Collectively, our steel operations sell directly to end users and service centers. These products are used in numerous industry sectors, including the automotive, construction, commercial, transportation and industrial machinery markets.

        Metals Recycling and Ferrous Resources Operations.    This operating segment includes our metals recycling operations, liquid pig iron manufacturing facility and iron nugget manufacturing start-up facility. Our metals recycling and ferrous resources operations accounted for 9% of our consolidated net sales in 2007 and 31% in both 2008 and 2009.

3


Table of Contents

        Steel Fabrication Operations.    Our steel fabrication operations include three operating and two idled New Millennium Building Systems' plants located in the Midwest and Southeastern parts of the United States. Revenues from these plants are generated from the fabrication of trusses, girders, steel joists and steel decking used within the non-residential construction industry. Steel fabrication operations accounted for 5% and 4% of our consolidated net sales and 4% of our consolidated gross margin during 2008 and 2009, respectively.

Current Environment

        As a result of prevailing domestic and global economic conditions in the second half of 2008 and throughout 2009, there has been significant declines in, among others, non-residential construction, residential construction and automobile manufacturing activity. Consistently, 2009 was a challenging year for our company and the domestic steel manufacturing and metals recycling industries. Specifically, as a result of this environment, we have experienced deterioration in the volumes of orders and prices we can charge our customers in these industries, and as a consequence our revenues and profitability have also declined.

        Despite these challenges, we believe we are well-positioned to weather this economic downturn. Our financial strategy currently includes a commitment to improve our leverage metrics, while allowing for long-term sustainable growth and maintaining appropriate liquidity levels. Our commitment to these goals drives a focus on controlling costs and maximizing per unit margins, managing capital investments, and disciplined growth.

        During 2009, our focus was toward strengthening our capital structure and enhancing long-term liquidity.

Competitive Strengths / Business Strategy

        Although the depth and duration of the current economic downturn has been more pronounced than previous recessions, we believe our financial strategy, coupled with our competitive advantages of maintaining a low, variable cost structure; producing a diversified, value-added product offering; controlling a secure supply of recycled ferrous metals; and having an experienced senior management team and entity-wide entrepreneurial culture, has positioned us to navigate the economic downturn in a manner that can strengthen our leadership position in a recovery and improve our returns to stockholders.

4


Table of Contents

One of the Lowest Cost Steel Producers in the United States; State-of-the-Art Facilities / Continue to Maintain Low Production Costs

        We are focused on continuing to maintain and enhance one of the lowest operating cost structures in the North American steel industry. Our low operating costs are primarily a result of our efficient plant designs and operations, our high productivity rate, such as our productivity rate of approximately 0.3 man hours per hot band ton produced at our Flat Roll Division's mill, low ongoing maintenance cost requirements and strategic locations near sources of our primary raw material, scrap steel and our customers.

        We will continue to strive to optimize the use of our equipment, enhance our productivity and explore new technologies to further improve our unit costs of production at each of our facilities. We believe that as one of the lowest cost producers in each of our primary operating segments, we are able to better manage through cyclical, and non-cyclical (such as the current economic environment) downturns, and to always maximize our profitability. We continuously seek to maximize the variability of our cost structure and to reduce per unit and fixed costs. Our incentive compensation plans at all employee levels are based on both divisional and consolidated company performance. They are designed to reward high productivity and efficient use of physical resources and capital employed.

Experienced Management Team and Unique Corporate Culture / Foster Entrepreneurial Culture

        Our senior management team is highly experienced and has a proven track record in the steel industry and metals recycling industry. Their objectives are closely aligned with our stockholders through meaningful stock ownership positions and performance-based compensation programs. Our corporate culture is also unique for the steel industry. We emphasize decentralized decision making and have established incentive compensation programs specifically designed to reward employee teams for their efforts towards enhancing productivity, improving profitability and controlling costs.

        We intend to continue to foster our entrepreneurial corporate culture and emphasize decentralized decision making and responsibility, while rewarding teamwork, innovation and operating efficiency. We will also continue to focus on maintaining the effectiveness of our incentive-based bonus plans that are designed to enhance overall productivity and align the interests of our management and employees with our stockholders.

Diversified Product Mix / Expand Product Offerings

        Our current products in our steel segment include hot rolled, cold rolled, galvanized, Galvalume® and painted sheet steel; various structural steel beams and rails; special bar quality steel; various merchant steel products, including beams, angles, flats and channels. In addition, we offer steel finishing and fabrication services. In the metals recycling segment, our products include an array of both ferrous and nonferrous scrap processing, scrap management, transportation, and brokerage products and services. Finally, our steel fabrication segment produces steel joists and steel decking materials. This diversified mix of products enables us to access a broad range of end-user markets, serve a broad customer base, and mitigate our exposure to cyclical downturns in any one product or end-user market. In addition, our value added product offerings help to balance our exposure to commodity grade products.

        We will continue to seek additional opportunities to further expand our range of products through the expansion of existing facilities, greenfield projects and acquisitions of other steel producers or steelmaking assets as well as scrap recycling companies that may become available in both the domestic steel and recycling industries. Completion of our Mesabi Nugget project; as well as the expansions and upgrades of existing facilities are important steps in pursuing our strategy of product line expansion.

5


Table of Contents

Secure Supply of Ferrous Raw Materials / Develop Metals Recycling and Ferrous Resources Business Platform

        We maintain a secure supply of ferrous raw material resources through the benefit of our metals recycling operations, OmniSource Corporation, as well as through our current and future iron-making facilities, Iron Dynamics and Mesabi Nugget. Ferrous materials represent our single-largest manufacturing cost and generally represent between 55% and 60% of our steel production costs. During 2009, OmniSource provided our steel operations with 47% of their ferrous material needs and Iron Dynamics provided our Flat Roll Division with 7% of the mill's iron requirements through the transfer of liquid pig iron, a higher-quality, energy-saving substitute. As Mesabi Nugget production increases, it will also supply our steel operations with iron requirements.

        As global and domestic demand for steel products improves as a response to improving world economies and consumption rates, we believe there will be pressure on the supply of world commodities, including ferrous materials. During this economic downturn, there has been a significant reduction in industrial scrap supply due to historically low manufacturing rates. There has also been less generation of other sources of scrap, such as auto bodies, appliances, and other goods, as consumers are utilizing assets for longer periods of time and replacing items less frequently. In addition, as world demand increases, domestic ferrous resources are often shipped overseas to developing countries for their own consumption in steel production.

        We believe our metals recycling and ferrous resources operations, not only provide us with a quality, cost effective, secure raw material platform, but we also believe they provide us with significant revenue generating and profitability opportunities, that allow for funding of future growth, whether in resources or in other ventures. We intend to continue to participate in the development of new technologies to increase the effectiveness of our metals recycling recovering capabilities and to develop new relationships in order to increase the amount of unprocessed metals we have the ability to source and eventually sell.

Strategic Geographic Locations / Enter New Geographic Markets

        The locations of our steelmaking facilities, near sources of scrap materials and near our customer base, allow us to realize freight savings for inbound scrap as well as for outbound steel products destined for our customers. Recycled steel scrap and iron units represent the most significant component of our cost of steel manufacturing. Our metals recycling facilities are located in the Upper Midwest and Southeastern United States, and thus further expand our geographic service area. We believe these regions account for a majority of the total steel scrap produced in the United States. The Techs in Pittsburgh, Pennsylvania and our Jeffersonville, Indiana galvanizing facility located on the Ohio River also provide us with a geographic reach to Southern markets.

        We may seek to enter new steel markets in strategic geographic locations that offer attractive growth opportunities.

2010 Outlook

        Looking ahead to 2010, we remain cautious concerning demand for our products given the current economic environment; however, we are seeing positive signs as our order logs related to sheet steel products, special bar-quality products and ferrous and nonferrous materials are improving. We currently anticipate increased utilization rates in both our steel and metals recycling operations during the year. Given the continued weakness in the non-residential construction markets, we currently do not anticipate material improvement during 2010 in our fabrication or structural steels operations.

        Our focus will continue to be on enhanced liquidity, disciplined cost control and revenue optimization, while continuing to manage risk in an uncertain and volatile economic environment. We currently plan to spend less than $150 million in capital investments during 2010, of which over 50% are currently within our steel operations. We believe our current possible sources of cash are adequate to meet the cash requirements associated with these possible investments. As we progress through the

6


Table of Contents


year, if our markets and liquidity levels warrant, we may approve additional capital investments, or delay already planned projects.

Industry Segments

        We have three reportable segments: steel operations, metals recycling and ferrous resources operations, and steel fabrication operations. Please refer to Item 8. Consolidated Financial Statements and Supplementary Data for additional information.

    Steel Operations    

        Our steel operations segment consists of steelmaking and coating operations. The following chart summarizes the locations and the capacities of the facilities in the broad categories:

 
  Casting   Rolling/Billet  
Steel Production Capacity (tons)
  Current   Expected
Future
  Current   Expected
Future
 

Sheet Products:

                         
 

Flat Roll Division—Butler, Indiana

    3,100,000     3,100,000     3,000,000     3,000,000  

Long Products:

                         
 

Structural and Rail Division—Columbia City, Indiana(1)

    1,500,000     2,200,000     1,800,000     1,800,000  
 

Engineered Bar Products Division—Pittsboro, Indiana(2)

    600,000     700,000     550,000     700,000  
 

Roanoke Bar Division—Roanoke, Virginia

    650,000     650,000          
   

Merchant Bars

            500,000     500,000  
   

Billets(3)

            150,000     150,000  
 

Steel of West Virginia—Huntington, West Virginia

    275,000     275,000     320,000     320,000  
                   

    6,125,000     6,925,000     6,320,000     6,470,000  
                   

 

 
  Galvanizing   Painting  
Steel Coating Capacity (tons)
  Current   Expected
Future
  Current   Expected
Future
 

Sheet Products:

                         
 

Flat Roll Division—Butler, Indiana

    720,000     720,000     240,000     240,000  
 

The Techs—Pittsburgh, Pennsylvania

    1,000,000     1,000,000     N/A     N/A  
 

Jeffersonville—Jeffersonville, Indiana

    300,000     300,000     190,000     190,000  
                   

    2,020,000     2,020,000     430,000     430,000  
                   

(1)
The increase in future expected casting capacity is due to the anticipated completion of a second caster. In the third quarter of 2010, we expect to begin commissioning.

(2)
The increase in expected future casting and rolling capacity is due to anticipated expansion of melting capacity.

(3)
Excess billet tonnage available for sale.

Note: Capacities represent the capabilities based on mill configuration and the related employee support. These capacities do not represent expected volumes in a given year. In addition, estimates of mill capacity, particularly rolling capacity, are highly dependent on the specific product mix manufactured. Each of our mills can and do roll many different types and sizes of products; therefore, our capacity estimates assume a typical product mix.

7


Table of Contents

SHEET PRODUCTS

        Our steel sheet products are produced by both our Flat Roll Division which consists of our flat roll mill, galvanizing and paint facilities in Butler, Indiana; our galvanizing and paint facilities in Jeffersonville, Indiana; and The Techs our Pittsburgh, Pennsylvania-based galvanizing company, which operates three galvanizing facilities: GalvTech, MetalTech, and NexTech.

        Our flat roll mill manufactures flat rolled, hot rolled, cold rolled and coated steel products. We produced 2.4 million tons and 2.2 million tons at this facility in 2008 and 2009, respectively. Our products are characterized by high quality surface characteristics, precise tolerances and light gauge. In addition, this mill has achieved ISO 9001:2008—ANSI/ISO/ASQ Q9001-2008 certification. We believe that these certifications have enabled us to serve a broad range of customers who may require certifications for themselves or to satisfy the end-users of our steel products.

        Our flat roll mill has two twin-shell electric arc furnaces, which enable us to melt scrap in one vessel while tapping the other vessel and refilling it with steel scrap and iron units to make it ready for the next heat. This results in more heats and greater productivity. We have three ladle metallurgy stations, two continuous thin-slab casters which produce two-inch slabs, and two tunnel furnaces. Our hot rolling mill, which progressively reduces the slab in thickness, consists of a seven-stand rolling mill capable of rolling sheet steel down to 1.0mm, with excellent surface quality, which enables us to access markets previously available only to more costly cold finished material.

        Located within our flat roll mill, we have a hot rolled galvanizing line capable of coating steel in gauges from .044 to .160 inches and in widths ranging from 39 to 61 inches. Also within our flat roll mill, we have a cold rolled galvanizing line capable of coating steel in gauges from .014 to .068 inches and in widths ranging from 39 to 61 inches. Our on-site paint line receives material directly from our other processing lines and is capable of painting hot rolled galvanized coil, cold rolled coil and cold rolled galvanized coil in gauges of .010 to .070 inches and in widths ranging from 39 to 61 inches. We believe this enables us to realize substantial savings in the production of painted coil when compared to remote off-site coating facilities.

        In Jeffersonville, Indiana, we have a cold rolled galvanizing facility located within the Clark Maritime Centre on the Ohio River. This facility is capable of coating cold rolled steel in gauges from .008 to .045 inches and in widths between 24 and 60 inches. This gauge range is lighter than that available from our Butler facility and creates further expansion of our value added product offerings. Our flat roll mill provides our Jeffersonville facility with cold rolled material.

        The Techs facilities produced 804,000 tons and 640,000 tons at this facility in 2008 and 2009, respectively. The Techs facilities have galvanizing lines with varying capabilities. NexTech is capable of coating cold rolled steel in gauges from .007 to .020 inches and in widths between 24 and 43 inches. GalvTech is capable of coating cold rolled steel in gauges from .012 to .040 inches and in widths between 30 and 60 inches. MetalTech is capable of coating cold rolled steel in gauges from .015 to .160 inches and in widths between 24 and 52 inches. In addition to third party steel producers, our Flat Roll Division provides The Techs with required steel material. The Techs has achieved the ISO 9001:2000—ANSI/ISO/ASQ Q9001-2000 certification.

8


Table of Contents

        The following table summarizes the mix of types of sheet products we sold during the respective years.

 
  2008   2009  

Products:

             

Hot rolled

    28 %   24 %

Pickled

    4     5  

Cold rolled

    5     6  

Hot rolled galvanized

    15     16  

Cold rolled galvanized

    33     32  

Galvalume®

    4     4  

Painted

    11     13  
           
 

Total

    100 %   100 %
           

        Hot rolled Products.    Our flat roll mill produces hot rolled products that include a variety of high quality mild and medium carbon and high strength low alloy hot rolled bands in widths from 40 inches to 62 inches and in thicknesses from .500 inches down to .043 inches. We also produce an array of lighter gauge hot rolled products, including high strength low alloy and medium carbon steels. These products are suitable for automobile suspension arms, frames, wheels, and other unexposed parts in auto and truck bodies; truck, trailer and recreational vehicle parts and components; mechanical and structural steel tubing; gas and fluid transmission piping, building and construction products; rail cars; ships, barges, and other marine equipment; agricultural equipment and farm implements; lawn, garden, and recreation equipment, industrial machinery and shipping containers; and highway guard rails. We believe that our basic hot rolled material has shape characteristics that exceed those of other thin-slab flat roll steel mini-mills and compares favorably with those of the integrated steel mills.

        We sell a portion of our hot rolled coils produced at our flat roll mill directly to end-users or to intermediate steel processors or service centers, where they may be pickled, cold rolled, annealed, tempered, galvanized, or painted by those customers. The rest of the hot rolled coils are directed to our cold mill, where we add value to this product through our own pickling, cold rolling, annealing, tempering, galvanizing, and painting processes. A portion of our cold rolled production is shipped to our Jeffersonville, Indiana galvanizing facility.

        Cold Rolled Products.    Cold rolled steel is hot rolled steel that has been further processed through a pickler and then passed through a rolling mill until the desired gauge, or thickness, and other physical properties have been achieved. Cold rolling reduces gauge and hardens the steel and, when further processed through an annealing furnace and a temper mill, improves uniformity, ductility and formability. Cold rolling can also impart various surface finishes and textures. Cold rolled steel is used in exposed steel applications that demand higher surface quality or finish, such as exposed automobile and appliance panels. As a result of higher processing costs, cold rolled prices are typically higher than hot rolled prices. Cold rolled material is often coated or painted.

        Coated Products.    Hot rolled or cold rolled steel can be coated with zinc to render it corrosion-resistant and to improve its paintability. Galvanized, galvannealed, Galvalume®, electro-galvanized and aluminized products are types of coated steels. These are also the highest value-added sheet products because they require the greatest degree of processing and tend to have the strictest quality requirements. Coated steel is used in high volume applications, such as automobiles, household appliances, roofing and siding, heating and air conditioning equipment, air ducts, switch boxes, chimney flues, awnings, garbage cans and food containers. Our paint lines in Butler and Jeffersonville incorporate state-of-the-art coil coating equipment with quick color change capability and on-line color matching this allows us to produce pre-painted steel products that are used in many of these same end products.

9


Table of Contents

        We also produce hot rolled pickled and oiled, hot rolled galvanized, hot rolled galvannealed, cold rolled galvanized, cold rolled galvannealed and fully processed cold rolled sheet. As a result of our lighter gauge hot rolling capabilities, our hot rolled galvanized and galvannealed steel products are capable of replacing products that have traditionally only been available as more costly cold rolled galvanized or cold rolled galvannealed steel. This material is typically used in transportation products, building products, such as raised garage door panels, heating and cooling products, appliances, furniture and lighting equipment.

        Customers.    Steel processors and service centers typically act as intermediaries between primary steel producers and the many end-user manufacturers that require further processing of hot rolled coils. The additional processing performed by the intermediate steel processors and service centers include pickling, galvanizing, cutting to length, slitting to size, leveling, blanking, shape correcting, edge rolling, shearing and stamping. We expect that our intermediate steel processor and service center customers will remain an integral part of our customer base. The location of our Jeffersonville facility on the Ohio River also creates opportunities for market expansion into other geographic regions. Our Flat Roll Division's sales inside the United States accounted for approximately 99% of the division's sales in 2009.

        During 2009, we sold our flat rolled products to approximately 400 customers. Heidtman Steel Products, Inc, which is principally owned by one of our directors, accounted for approximately 4% and 3% of our consolidated net sales in 2008 and 2009, respectively.

        The Techs produces galvanized flat rolled products that are similar to those produced by our Flat Roll Division and sold to a similar customer base. Each of The Techs facilities specializes in the galvanizing of specific types of flat rolled steels in generally non-automotive applications, servicing a variety of customers in the heating, ventilation and air conditioning (HVAC), commercial construction, and consumer goods markets. The Techs sales inside the United States were approximately 98% in 2009.

        The following table summarizes the types of customers who purchased our sheet products:

 
  2008   2009  

Customers:

             

Service center (including end-user intermediaries)

    55 %   62 %

Construction

    10     10  

Heating, ventilation and air conditioning

    8     8  

Pipe and tube

    9     1  

Other original equipment manufacturers (OEM)

    18     19  
           
 

Total

    100 %   100 %
           

10


Table of Contents

        Markets.    Flat rolled products represent the largest portion of the domestic steel market. Flat rolled products consist of hot rolled, cold rolled and coated steel. The following table shows the U.S. shipments of these products, as reported by the American Iron and Steel Institute (AISI).

 
  Years Ended December 31,  
 
  2005   2006   2007   2008   2009  

U.S. Shipments (net tons, in millions):

                               

Hot Rolled(1)

    31.3     30.3     29.1     28.1     17.0  

Cold Rolled(2)

    15.1     15.6     14.9     13.6     8.1  

Coated(3)

    22.1     23.8     22.1     18.3     12.1  
                       
 

Total

    68.5     69.7     66.1     60.0     37.2  
                       

Percentage of Total U.S. Steel Shipments

    65 %   64 %   62 %   61 %   62 %

(1)
Includes pipe/tube, sheet, strip and plate in coils.

(2)
Includes blackplate, sheet, strip and electrical.

(3)
Includes tin coated, hot dipped, galvanized, electrogalvanized and all other metallic coated.

        Competitors.    Our Flat Roll Division's products compete with many North American integrated hot rolled coil producers, such as U.S. Steel's plants near Detroit, Michigan, Granite City, Illinois, Gary, Indiana, Dravosburg, Pennsylvania, and Fairfield, Alabama; AK Steel Corporation's plant in Middletown, Ohio; and Mittal Steel's facilities in East Chicago, Illinois, Riverdale, Illinois, Cleveland, Ohio, Indiana Harbor, Indiana, Burns Harbor, Indiana, and Sparrow's Point, Maryland. Our hot rolled products also compete with the products of a number of hot rolled mini-mills, such as Nucor Corporation's plants in Crawfordsville, Indiana, Hickman, Arkansas, Decatur, Alabama, and Berkeley, South Carolina; Gallatin Steel Company's plant in Ghent, Kentucky; and North Star Bluescope Steel's plant in Delta, Ohio. Our flat rolled products compete as well with companies that convert steel slabs into sheet steel, such as Duferco Steel in Farrell, Pennsylvania.

        Certain competitors from time to time during the current economic recession idled and subsequently restart facilities in response to the changes in customer demand.

        The Techs main competitors are Nucor Corporation's plants in Crawfordsville, Indiana, Hickman, Arkansas, and Berkeley, South Carolina; Sharon Coatings in Sharon, Pennsylvania; U.S. Steel's plants near Granite City, Illinois, Pittsburgh, Pennsylvania, Fairless, Pennsylvania and Fairfield, Alabama; Wheeling Nisshin, in Follansbee, West Virginia; and Severstal in Baltimore, Maryland.

LONG PRODUCTS

Structural

        Our Columbia City, Indiana mill is currently designed to produce structural steel beams, pilings and other steel components for the construction, transportation and industrial machinery markets, as well as standard and premium grade rails for the railroad industry.

        We produced 1.1 million tons and 500,000 tons at this facility during 2008 and 2009, respectively. Our facility melts scrap and iron units in two single-shell electric arc furnaces. Our existing continuous caster is capable of casting four strands of various sized blooms and beam blanks, in varying lengths of 17 to 48 feet. We can transport the cast strands directly through a reheat furnace to our original four-stand, all reversing, hot rolling mill; to our medium section rolling mill completed in 2008; or into a storage area for reheating and rolling in either mill at a later time. Our original hot rolling mill rolls the product into either a structural steel product or a rail product. The medium section rolling mill can

11


Table of Contents


produce lighter structural shapes and merchant bar. Our Columbia City, Indiana facility has achieved the ISO 9001:2000—ANSI/ISO/ASQ Q9001-2000 certification.

        Products.    We have the capability to produce various structural steel products such as wide flange beams, American Standard beams, miscellaneous beams, H piling material, American Standard and miscellaneous channels, bulb angles, and zee's. The following listing shows structural steel products and their intended markets:

Products
  End Use

Wide flange, American Standard and miscellaneous beams

  Framing and structural girders, columns, bridge stringers, ribs or stiffeners, machine bases or skids, truck parts, and construction equipment

H piling

 

Foundation supports

Channel sections

 

Diaphragms, stiffeners, ribs and components in built-up sections

Bulb angles and zee's

 

Steel building components

        We have also initiated certain value added services for the Midwestern fabricator market, including exact length and exact piece count capabilities.

        Customers.    The principal customers for our structural steel products are steel service centers, steel fabricators and various manufacturers. Service centers, though not the ultimate end-user, provide valuable mill distribution functions to the fabricators and manufacturers, including small quantity sales, repackaging, cutting, preliminary processing and warehousing. The majority of our structural steel products are sold to service centers. Our Structural and Rail Division's sales inside the United States accounted for approximately 92% of the division's sales in 2009.

        Sales of structural steel products are sensitive to the level of construction activity including infrastructure development, which is in turn affected by such cyclical factors as general economic conditions, interest rates, inflation, consumer and government spending and employment.

        Markets.    According to the Steel Manufacturers Association, domestic structural steel consumption in 2007, 2008 and 2009 was approximately 8.4 million tons, 7.6 million tons and 4.3 million tons, respectively. Consumption of structural steel products is influenced both by new construction and manufacturing activity and by the selection of steel over alternative structural or manufacturing materials.

        Competitors.    Our structural steel products compete with various electric arc furnace structural steelmakers, some of which have cost structures and flexible management cultures similar to our own. Notable competitors include Nucor Steel in Berkeley, South Carolina; Nucor-Yamato Steel in Blytheville, Arkansas; Gerdau Ameristeel in Midlothian, Texas and Petersburg, Virginia; and Arcelor Mittal in LaPlace, Louisiana. The Nucor mini-mills and the Gerdau Ameristeel mini-mills, have accounted for the majority of tons produced in North America over the past three years. We also believe, however, that both geography and product choice play significant roles. There are currently no other structural mills located in the Midwest, one of the largest structural steel consuming regions in the United States, and we believe we provide freight-savings and customer service benefits to service centers, fabricators and manufacturers located in the region. We also believe that most of Canada's structural steel consumption is located in Canada's eastern provinces, closer to us than to either of our two largest competitors. Moreover, we provide a broad product mix, focusing on the mid-range and

12


Table of Contents


larger section served only by Nucor-Yamato Steel and Gerdau Ameristeel from locations more remote than our facility.


Rail Products

        Our Columbia City, Indiana mill is designed to produce standard and premium grade rails for the railroad industry. We produced and shipped approximately 4,000 and 27,000 tons of industrial quality rails during 2008 and 2009, respectively. In addition, our rail-welding facility has the ability to weld longer length rails to lengths up to 1,700 feet. Such long strings offer substantial savings to the railroads both in terms of initial capital cost and through reduced maintenance. In contrast, current production of rail in the United States, and available imported rail, is limited to 80-foot lengths, as a result of existing plant layout restrictions and the physical limitations of ocean freight.

        Products.    We are currently capable of manufacturing standard rail grades in a range of weights from 115 lbs. per yard to 141 lbs. per yard, in highly desirable 240 feet rail lengths, which no one else presently produces in or imports into the United States or Canadian rail markets.

        Customers.    The marketplace for steel rails in the United States and Canada, according to the AISI, averaged approximately 1 million tons during the last three years ended December 31, 2008, and is specialized, with approximately seven Class 1 railroad purchasers: Burlington Northern Santa Fe, Union Pacific, Canadian Pacific Railway, Norfolk Southern, CSX Transportation, Kansas City Southern Rail Network, and Canadian National Railway.

        Markets.    According to AISI data, domestic rail shipments averaged approximately 1 million tons over the 2006 to 2008 period, including standard rail and premium or head-hardened rail. Of the total shipments of rail during 2008, approximately 70% was produced by the two other U.S. rail producers and approximately 30% was imported, mainly from Japan and Europe. There are currently no rail producers in Canada.

        Competitors.    At present, the rail market is principally served by two producers: Rocky Mountain Steel in Pueblo, Colorado, a division of Evraz Oregon Steel Mills, Inc., and Arcelor Mittal Steel, in Steelton, Pennsylvania. Each of these producers has the capability to produce either standard or premium rail, although neither is currently equipped to produce rail in 240-foot lengths. Global competitors include high quality integrated and electric furnace steel producers in Europe and Asia, including Voest-Alpine, Nippon Steel, NKK, Tata, Moravia Steel, and Lucchini, SPA.


Engineered Bar Products

        Our engineered bar mill located in Pittsboro, Indiana is capable of producing a broad array of engineered special bar quality (SBQ), merchant bar quality (MBQ), and reinforcing bar products. The mill consists of a 100-ton single-shell AC furnace, a three-strand continuous caster currently capable of casting both a 7"×7" billet and a 14"×10" bloom, a reheat furnace, and a rolling mill consisting of a roughing mill and intermediate mill, as well as reducing and sizing blocks used in the production of SBQ rounds. We produced 589,000 tons and 313,000 tons during 2008 and 2009, respectively at this facility, of which substantially all of the production was SBQ products. We generally employ this facility primarily for the manufacture of SBQ products.

        Adjacent to our engineered bar mill we have a finishing facility which provides various downstream finishing operations for our SBQ steel bars. The facility has an estimated annual processing capacity of 160,000 tons. Processing operations include turning, polishing, straightening, chamfering, precision saw-cutting and heat-treating capabilities. In addition, non-destructive testing services are available, including eddy current, flux leakage and ultrasonic inspection. The additional processing capabilities provide essential processes and services that have been requested by our growing SBQ customer base. Additionally, our facility has achieved the ISO 9001:2000—ANSI/ISO/ASQ Q9001-2000 certification.

13


Table of Contents

        Products.    We are capable of producing a broad line of engineered SBQ products. SBQ products are uniquely designed for applications ranging from gears and shafts to mining equipment and oil patch tubing. We can produce SBQ rounds in sizes from 11/2 to 9 inches and SBQ round cornered squares in sizes from 2 to 8 inches. During 2009, we shipped approximately 304,000 tons, primarily all of which were SBQ products. Approximately 15% of our products produced had additional processing completed in our bar finishing facility.

        Customers.    SBQ products are principally consumed by cold finishers, forgers, intermediate processors, OEM manufacturers, steel service centers, and distributors. Major customers include Caterpillar, One Steel Grinding, and Michigan Seamless Tube. Our engineered bar sales inside the United States accounted for approximately 97% of the division's sales in 2009.

        Markets.    According to AISI data, domestic apparent hot rolled bar steel demand has averaged approximately 7 million tons nationally over the 2004 to 2008 period. According to the AISI, apparent demand of light structural shapes, also characterized by a major dimension of less than 3 inches, averaged between 1 million and 2 million tons annually during the 2004 to 2008 period. These amounts include both SBQ and merchant bar products.

        Competitors.    Our major competitors for SBQ products include Republic Engineered Products of Akron, Ohio; The Timken Company of Canton, Ohio; and Gerdau MacSteel in Jackson, Michigan and Monroe, Michigan.


Merchant Bar Products

        Our primary merchant bar producing facility is our Roanoke, Virginia mill. Originally constructed in the mid-1950's this mini-mill has gone through several major upgrades and expansions during the past 50 years. Currently, the mill consists of a primary 100-ton electric arc furnace, a ladle metallurgy furnace, a five-strand continuous caster capable of casting up to 6 inch square billets, a reheat furnace, and a rolling mill with automatic in-line straightening, shearing and bundling capabilities. Additionally, the Roanoke facility has achieved the ISO 9001:2008 certification.

        In 2009, the Roanoke facility produced 372,000 tons (576,000 tons in 2008) of billets of which 322,000 tons (443,000 tons in 2008) were rolled into finished steel products. The excess steel billet production is sold to mills without sufficient melting capacities, including some of our own mills such as our Steel of West Virginia facility. In addition, our steel fabrication operations also purchase angles from our Roanoke facility for use as a raw material.

        Products.    We are capable of producing a broad line of merchant steel products consisting of angles, plain rounds, flats, channels, and reinforcing bars of various lengths and sizes. We also produce various sizes and grades of billets.

        Customers.    These merchant bar products are sold primarily to steel service centers as well as joist, rebar, OEM fabricators, while billets are sold to other steel mills. Our Roanoke facility's sales inside the United States accounted for approximately 100% of their sales in 2009.

        Markets.    As noted above, the apparent hot rolled bar steel demand has averaged approximately 7 million tons nationally over the 2004 to 2008 period according to AISI date. According to the AISI, apparent demand of bar-sized light shapes averaged between 1 million and 2 million tons annually during the 2004 to 2008 period. These amounts include both SBQ and merchant bar products.

        Competitors.    Our major competitors for merchant bar products are Nucor's operations in Darlington, South Carolina, Auburn, New York, Birmingham, Alabama, Jackson, Mississippi, Kankakee, Illinois, Marion, Ohio; Commercial Metals operations in Cayce, South Carolina and Birmingham, Alabama; and Gerdau Ameristeel operations in Charlotte, North Carolina, Cambridge, Ontario,

14


Table of Contents


Whitby, Ontario, Cartersville, Georgia, Jacksonville, Florida, Joliet, Illinois, Knoxville, Tennessee, Sayerville, New Jersey, and Jackson, Tennessee.


Specialty Shapes

        Our Steel of West Virginia mill consists of two 70-ton electric arc furnaces, a three strand continuous caster capable of casting squares from 4"×4" to 8"×8" and rectangles from 5"×4" to 4"×93/4", two rolling mills and various types of fabrication equipment. Unlike most other mills, Steel of West Virginia frequently performs finishing operations on its products, such as cutting to length, additional straightening, hole punching, shot blasting, welding and coating. Through this additional finishing, we create custom finished products that are generally placed directly into our customers' assembly operations. Steel of West Virginia has fabrication facilities in Huntington, West Virginia and Memphis, Tennessee. We produced 247,000 tons and 167,000 tons of various merchant and structural steel products at this facility during 2008 and 2009, respectively. Additionally, Steel of West Virginia has achieved the ISO 9001:2008 certification.

        Products.    We produce or fabricate specialty steel sections and custom-finished products, which are placed directly into customers' assembly lines. Our flexible manufacturing capabilities enable us to meet demand for a variety of custom-ordered and designed products. Many of these products are produced in small quantities for low volume end uses.

        Customers.    Our customers are primarily OEM's producing truck trailers, industrial lift trucks, merchant products, guardrail posts, manufactured housing, mining, and off-highway construction equipment. While we have a wide variety of customers, the largest are in the merchant products and industrial lift truck industries.

        Markets.    Steel of West Virginia operations generally sell into smaller niche markets. Although we sell these products throughout North and South America, as well as Europe and Asia, customers in the United States markets accounted for 94% of their net sales in 2009.

        Competitors.    Our industrial truck products compete with European operations, such as Mannstaedt in Germany; Corus in Skinnegrove, England; and Hoesch in Germany. Our major truck-trailer-beam competitor, a division of Gerdau Ameristeel, operates fabrication operations in Canada and near Memphis, Tennessee. Our other product offerings compete on a national basis with Nucor in Berkeley, South Carolina and in Darlington, South Carolina and Gerdau Ameristeel in Cartersville, Georgia.

    Metals Recycling and Ferrous Resources Operations    

METALS RECYCLING

        Our metals recycling operations include both ferrous and nonferrous scrap metal processing, transportation, marketing, brokerage, and consulting services in over 70 locations primarily in the Midwest and Southeast portion of the United States. In addition, OmniSource designs, installs and manages customized scrap management programs for industrial manufacturing companies at more than 200 locations throughout North America. Our steel mills utilize a portion of the steel scrap processed through OmniSource as raw material in our steelmaking operations, and the remainder is sold to other consumers such as other steel companies and foundries. In 2009, OmniSource supplied our steel mills with approximately 47% of their ferrous raw material requirements representing approximately 23% of OmniSource's 2009 net sales.

        Our metals recycling operations processed and/or brokered approximately 5.6 million tons and 4.1 million tons of ferrous material during 2008 and 2009, respectively. OmniSource also processed and

15


Table of Contents


brokered approximately 912 million pounds and 780 million pounds of nonferrous material during 2008 and 2009, respectively. OmniSource's revenues by major scrap category in 2009 were approximately 56% ferrous and 44% nonferrous (including stainless). Sales inside the United States accounted for approximately 94% of OmniSource's net sales in 2009.

        We sell various grades of ferrous scrap metals to steel mills and foundries, and we sell various grades of nonferrous metals such as copper, brass, aluminum and stainless steel. We generally sell these materials to aluminum sheet and ingot manufacturers, brass and bronze ingot makers, copper refineries and mills, smelters, specialty mills, alloy manufacturers and other consumers. Ferrous scrap metal is the primary raw material for electric arc furnaces such as those operated by our steel mills. Our mills do not utilize the nonferrous scrap. We purchase ferrous and nonferrous scrap metals, processed and unprocessed, in a variety of forms for our metals recycling facilities.

        Ferrous scrap comes from two primary sources: (i) manufacturers and industrial plants, metal fabrication plants, machine shops and factories which generate steel scrap referred to as prompt or industrial scrap, and (ii) scrap dealers, retail individuals, auto wreckers, demolition firms and others who generate steel and iron scrap referred to as "obsolete" scrap. Market demand and the composition, quality, size, weight and location of the materials are the primary factors that determine prices. We purchase nonferrous scrap from three primary sources: (i) manufacturers and other nonferrous scrap sources which generate or sell scrap aluminum, copper, stainless steel and other nonferrous metals; (ii) producers of electricity, telecommunication service providers, aerospace, defense and recycling companies that generate nonferrous scrap consisting primarily of copper wire, aluminum beverage cans and various other metals and alloys; and (iii) retail individuals who deliver directly to our facilities material which they collect from a variety of sources. We also collect ferrous and nonferrous scrap from sources other than those that are delivered directly to our processing facilities by placing retrieval boxes near these sources. The boxes are subsequently transported to our processing facilities.

        Our metals recycling facilities consist of offices, warehouse buildings and open air collection and processing facilities of various sizes and acreages, equipped with specialized equipment for processing both ferrous and nonferrous metal. We receive, sort, process and store the metals. We equip our facilities with scales, shears, baling presses, briquetting machines, conveyors and magnetic separators, which enable us to efficiently process large volumes of scrap metals. To facilitate processing, shipping and receiving, we equip our ferrous metal processing centers with presses, shredders or hydraulic shears to prepare and compress scrap metal for easier handling. Cranes are utilized to handle scrap metals for processing and to load material for shipment. Many facilities have rail access as ferrous scrap is primarily shipped by open gondola railcar. Additionally, several of the metals recycling divisions have achieved certifications, including ISO 9001:2000, ISO 9001:2008, and ISO 14001:2004 certification.

        Products.    Our metals recycling operations primarily involve the purchase, processing and resale of ferrous and nonferrous scrap metals into reusable forms and grades.

        We produce an array of ferrous products used in foundry and steel mill applications for use in our own steel mills or for resale to other customers through a variety of methods, including sorting, shearing, cutting, torching, baling, shredding, briquetting and breaking. Our major ferrous products include heavy melting steel, busheling, bundled scrap, shredded scrap and other scrap metal products such as steel turnings and cast iron. These products vary in properties or attributes related to cleanness, size of individual pieces and residual alloys. These factors are determined by the specific needs and requirements of the consumer and affect the individual product's relative value. We process nonferrous products, including aluminum, brass, copper, stainless steel and other nonferrous metals for use in foundry, mill refining, and smelting applications. Our Superior Aluminum Alloys operations produce specification aluminum alloys in the form of ingots, sows and molten metal. In addition, we provide transportation logistics (truck, rail, and river barge), management services, marketing, brokerage, and consulting services related to the scrap industry.

16


Table of Contents

        Customers.    We sell processed ferrous scrap to end-users such as steel producing mini-mills like ours, integrated steelmakers, foundries, secondary smelters and metal brokers who aggregate materials for other large users. Most of our ferrous-scrap customers purchase processed scrap through negotiated spot sales contracts which establish a quantity purchase for the month. The price we charge for ferrous scrap depends upon market demand and transportation costs, as well as, the quality and grade of the scrap. In many cases, our selling price also includes the cost of transportation to the end-user.

        We sell processed nonferrous scrap to end-users such as specialty steelmakers, foundries, aluminum sheet and ingot manufacturers, copper refineries and smelters, brass and bronze ingot manufacturers, wire and cable producers, utilities and telephone networks.

        Markets.    According to the Institute of Scrap Recycling Industries (ISRI), approximately 85 million tonnes of recycled iron and steel are processed annually in the United States. Scrap is a global commodity influenced by conditions in a number of industrialized countries throughout Asia, Europe and North America. ISRI estimates that approximately 18 million tonnes of ferrous scrap were exported from the U.S. in 2008. Market pricing of scrap was characterized in 2009 by high volatility.

        Scrap metal supplies are generated from a variety of sources. Industrial scrap or home scrap is generated from steel processing and manufacturing facilities utilizing steel in their production process. Obsolete scrap including post consumer waste, demolition of steel structures and automobiles represent a significant source of scrap generation. We do not purchase a material amount of scrap metal from a single source or from a limited number of major sources.

        Competitors.    The markets for scrap metals are highly competitive, both in the purchase of raw scrap and the sale of processed scrap. With regard to the purchase of raw scrap, we compete with numerous independent recyclers, as well as smaller scrap companies engaged only in collecting industrial scrap. In many cases we also purchase unprocessed scrap metal from smaller scrap dealers and other processors. Successful procurement of materials is determined primarily by the price offered by the purchaser for the raw scrap and the proximity of our processing facility to the source of the raw scrap. Both ferrous and nonferrous scrap sells as a commodity in both national and international markets, which are affected by relative economic conditions, currency fluctuations and the availability and cost of transportation. Competition for sales of processed scrap is based primarily on the price, quality and location of the scrap metals, as well as the level of service provided in terms of reliability and timing of delivery.

        We also face potential competition for sales of processed scrap from other producers of steel products, such as integrated steel mills and steel mini-mills, some of which are vertically integrated in the scrap metals recycling business, as a number of steel manufacturers currently operate their own scrap yards. In addition, other steel mills may compete with us in attempting to secure scrap supply through direct purchasing from our scrap suppliers. Scrap metals processors also face competition from substitutes for prepared ferrous scrap, such as pre-reduced iron pellets, hot briquetted iron, pig iron, iron carbide and other forms of processed iron. The availability and relative prices of substitutes for ferrous scrap could result in a decreased demand for processed ferrous scrap and could result in lower prices and/or lower demand for our scrap products.

        The industry is highly fragmented with many smaller family owned companies, although OmniSource also competes with a number of national and global companies, each of which has multiple locations in areas in which OmniSource also operates. These include The David J. Joseph Company (a subsidiary of Nucor Corporation), Sims Metal Management, Ferrous Processing and Trading Co., Aleris International, CMC, a division of Commercial Metals Company, Newell Recycling, and Darlington Shredding. In addition, OmniSource competes with many regional scrap companies. No single scrap metals recycler has a significant market share in the domestic market.

17


Table of Contents

FERROUS RESOURCES

        Scrap Metals.    Our principal raw material of our steel operations segment is scrap metal derived from, among other sources "home scrap," generated internally at steel mills themselves; industrial scrap, generated as a by-product of manufacturing; and "obsolete" scrap recycled from end-of-life automobiles, appliances, railroad cars, and railroad track materials, agricultural machinery and demolition scrap from obsolete structures, containers and machines.

        Scrap typically comprises more than 80% of the metallic melt mix in electric arc furnace steelmaking, in contrast to integrated mill steelmaking, where the proportion of scrap has traditionally been approximately 25% to 35%. Depending upon the scrap substitute material that may be available from time to time, and the relative cost of such material, the percentage of scrap used in our steelmaking operations could be reduced down to almost 60% of our metallic melt mix.

        Many variables can impact scrap prices, all of which reflect the pushes and pulls of the supply demand equation. These factors include the level of U.S. new steel production (for high quality low residual scrap is a by-product of new steel manufacturing activity), the level of exports of scrap from the United States, the amount of obsolete scrap production and the effect of speculation on the amount of scrap offered on the market from time to time. Generally, as domestic steel demand increases, so does scrap demand and resulting scrap prices. The reverse is also normally, but not always, true with scrap prices following steel prices downward when supply exceeds demand. According to ISRI, scrap recyclers in the U.S. annually recycle approximately 85 million tonnes of ferrous scrap and approximately 11 million tonnes of nonferrous scrap.

        The following table provides pricing per gross ton from metal based trade associations' estimates for ferrous materials used in steel production:

GRAPHIC

        The price of steel scrap, as a commodity, has tended to be volatile, rising and falling with supply and demand and not always in lock step with or in proportion to the market price of new steel. When scrap costs greatly accelerate, this threatens one of the principal elements of a mini-mill's traditional

18


Table of Contents


lower cost structure—the cost of its metallic raw material. Therefore, having a lower cost alternative source of iron for a portion of a mini-mill's melt mix, if realizable, would partially buffer the effects of high scrap prices and scrap price volatility. With the growing proportion of electric furnace steelmaking, both worldwide and domestically, we believe that the benefit of developing a cost-effective alternate iron source to augment scrap, our primary raw material, makes good economic sense in the long run.

        Iron Units.    Direct reduced iron, hot briquetted iron and pig iron can substitute for a limited portion of the steel scrap used in electric furnace mini-mill steel production. During 2009, we consumed 4.1 million tons of metallic materials in our steel making furnaces and approximately 8% (by weight) was scrap substitutes, mainly liquid pig iron. Our Iron Dynamics operations supplied 223,000 tons of scrap substitutes.

        Iron Dynamics developed a process of producing liquid pig iron and hot briquetted iron (HBI) that serves as a substitute for a portion of the metallic raw material mix that goes into our electric arc furnaces to produce steel. Direct reduced iron (DRI) is a metallic product made from millscale and iron ore "fines" that has been reduced in a rotary hearth furnace, using natural gas and coal. The reduction method employed by Iron Dynamics uses coal as the reducing agent. The DRI is either compacted by briquetters to form HBI, or is processed further to produce liquid pig iron. HBI can be immediately used in our melting furnaces or stockpiled for later use. Liquid pig iron is tapped from Iron Dynamics' submerged arc furnace and immediately transferred in ladles to the flat roll mill's melt shop, where it is combined with scrap steel in the mill's electric arc furnaces. During 2009, approximately 85% of DRI production was used to produce liquid pig iron.

        Since the plant's initial start-up in August 1999, we have made continuous process, design and equipment modifications, to improve production capacity and uptime capabilities. We have encountered various quality and consistency issues with this pioneering technology. During 2009, the plant's primary focus was to maximize liquid pig iron production, due to the inherent economic benefits achieved when the material is used in the steelmaking process, such as reduced energy cost, reduced materials cost and quicker melting cycles. During 2009, Iron Dynamics produced 165,000 tonnes (148,000 tonnes in 2008) of liquid pig iron and 37,000 tonnes (68,000 tonnes in 2008) of HBI. We have used and plan to use all of the facility's output in our steelmaking operations.

        Mesabi Nugget, our iron-making project at Hoyt Lakes, Minnesota, began the commissioning process of the facility in the fourth quarter of 2009 and by the end of December all individual production systems were operational and prepared for integration. Nuggets were produced on January 12, 2010. The facility continues to test and refine the process during its initials start-up phase. This plant is the world's first commercial iron-making facility to use the ITmk3® process, an iron-nugget production technology pioneered by Kobe Steel, Ltd., which Kobe Steel is licensing to the venture. We hold an equity position of $85.0 million, or an 81% equity interest, while Kobe Steel holds an equity position of $20.0 million, or 19%, noncontrolling equity interest. The project involved the construction of an iron-nugget manufacturing facility utilizing iron-ore concentrate, coal, and natural gas. Annual iron-nugget production capacity is expected to be 500,000 tonnes. We anticipate that substantially all of the iron output from the planned nugget plant will be consumed in our mills. We believe that this new business will be capable of providing a cost effective source of iron units to our steel mills that is of equal or higher quality than purchased pig iron.

19


Table of Contents

        We also plan to re-open an existing iron mine on the Mesabi Iron Range and to construct a facility for concentrating iron ore. We have purchased land on the Mesabi Iron Range in Minnesota that is expected to provide a long-term supply of iron ore. In the future, we plan to process the iron ore and use it as raw material feedstock for the nugget plant. In total, the cost of the mining project is currently estimated to be approximately $167 million. Mesabi Mining is currently in the permitting process, and mining operations could begin as early as the end of 2011. However, this is dependent on receiving the appropriate permits which are expected at the end of 2010.

    Steel Fabrication Operations    

        Our fabrication operations primarily serve the non-residential construction industry. As a result of the prevailing domestic decline in this industry, as well as many other construction-related industries, it is estimated that the steel joist and decking domestic demand decreased almost 50% during 2009. As a result, we have been unable to maintain our volumes and prices, therefore, our revenues and profitability have been severally reduced at these operations. In an effort to reduce costs and losses during this unprecedented downturn in the non-residential construction markets, we idled our South Carolina facility in the fourth quarter of 2008 and our Ohio facility in the second quarter of 2009. During 2008, these idled operations negatively impacted the segment's operating income by 5%, or an operating loss of $945,000. We have an annual estimated joist production capacity of 210,000 tons and an estimated deck production capacity of 170,000 tons in the currently operating facilities.

        We fabricate trusses, girders, steel joists and steel decking. These products are sold to the non-residential building components market. Total production of all products was 287,000 tons and 145,000 tons during 2008 and 2009, respectively. Our Flat Roll Division and Roanoke Bar Division supply a substantial portion of the steel utilized in these manufacturing operations.

        Products.    Our fabrication operations produce steel building components, including steel joists, girders, and trusses. Our individual joist products include bowstring, arched, scissor, double-pitched and single-pitched joists. Our Butler, Salem, and Lake City plants also produce a full range of steel roof, form, and composite floor decking.

        Customers.    Our fabrication primary customers are non-residential steel fabricators. Other customers include metal building companies, general construction contractors, developers, brokers and governmental entities. Our customers are located throughout the United States with a concentration in the eastern half of the country.

        Markets.    Our fabrication operations primarily serve the non-residential construction industry. As a result of the prevailing domestic decline in this industry, as well as many other construction-related industries, it is estimated that the steel joist and decking domestic demand decreased almost 50% during 2009. As a result, we have been unable to maintain our volumes and prices, therefore, our revenues and profitability have been severally reduced at these operations. The steel joist and deck market in the United States in 2008 and 2009 were approximately 2.0 million tons and 1.1 million tons of steel based trade association estimates.

        Competitors.    Our main competitors in the joist business are Vulcraft, a division of Nucor Corporation; Canam Group; Quincy Joist Co.; and CMC, a division of Commercial Metals Company. In the steel decking business, New Millennium's main competitors are Vulcraft; Wheeling Corrugating Co., Quincy Joist Co.; and CMC.

20


Table of Contents

Energy Resources

        Electricity.    Electricity is a significant input required in our electric arc furnaces in our steelmaking operations, representing 3% and 6% of steel operations costs of goods sold in 2008 and 2009, respectively. We have entered into a fixed price interruptible electricity supply agreement that extends through December 31, 2012, for our flat roll mill in Butler, Indiana. The contract allows our supplier to interrupt service in the event of an emergency or in response to various market conditions. Our structural mill and merchant bar mill purchase electricity at current market prices, while The Techs and Steel of West Virginia have negotiated fixed prices through 2010. Our engineered bar products division has a combination of fixed pricing and market pricing for the various components of the electrical services (demand charge, energy charge, riders, etc).

        Gas.    We purchase a portion of our operations' natural gas requirements at market prices and a portion by entering into hedging transactions on the futures markets for ultimate physical delivery in order to help minimize price volatility. Natural gas represented 2% and 3% of steel operations costs of goods sold in 2008 and 2009, respectively.

Patents and Trademarks

        We currently do not own any material patents or patent applications for technologies that are in use in our production processes. We have eight major registered trademarks, as follows:

Research and Development

        Our research and development efforts have consisted of efforts to develop or improve our operating practices, and our efforts to develop and improve alternative iron-making technologies through Iron Dynamics and our investment in Mesabi Nugget. With the exception of Mesabi Nugget, most of these research and development efforts have been conducted in-house by our employees. Kobe Steel, LTD has licensed the ITMK3® iron nugget production process technology to our Mesabi Nugget project.

Environmental Matters

        Our steel operations, metals recycling and ferrous resources operations, and steel fabrication operations are subject to substantial and evolving local, state and federal environmental, health and safety laws and regulations concerning, among other things, emissions to the air, discharges to surface and ground water and to sewer systems, and the generation, handling, storage, transportation, treatment and disposal of toxic and hazardous substances. In particular, our steel manufacturing operations are dependent upon both state and federal permits regulating discharges into the air or into the water in order to operate our facilities. We believe that in all current respects our steel operations, metals recycling and ferrous resources operations, and steel fabrication operations are in material compliance with all provisions of federal and state laws concerning the environment and we do not

21


Table of Contents


currently believe that future compliance with such provisions will have a material adverse effect on our results of operations, cash flows or financial condition.

        Since the level of enforcement of environmental laws and regulations, or the nature of those laws that may be enacted from time to time are sometimes subject to changing social or political pressures, our environmental capital expenditures and costs for environmental compliance may increase in the future. In addition, due to the possibility of unanticipated regulatory or other developments, the amount and timing of future environmental expenditures may vary substantially from those currently anticipated. The cost of current and future environmental compliance may also place U.S. steel producers at a competitive disadvantage with respect to foreign steel producers, which may not be required to undertake equivalent costs in their operations.

        Pursuant to the Resource Conservation and Recovery Act, or RCRA, which governs the treatment, handling and disposal of solid and hazardous wastes, the United States Environmental Protection Agency, or U.S. EPA, and authorized state environmental agencies conduct inspections of RCRA regulated facilities to identify areas where there may have been releases of solid or hazardous constituents into the environment and require the facilities to take corrective action to remediate any such releases. RCRA also allows citizens to bring certain suits against regulated facilities for potential damages and clean up. Our steelmaking facilities are subject to RCRA. Our manufacturing operations produce various by-products, some of which, for example, electric arc furnace or EAF dust, are categorized as industrial or hazardous waste, requiring special handling for disposal or for the recovery of metallics. We collect such co-products in approved baghouses and other facilities, but we are also examining alternative reclamation technologies to recycle some of these products. While we cannot predict the future actions of the regulators or other interested parties, the potential exists for required corrective action at these facilities, the costs of which could be substantial.

        Under the Comprehensive Environmental Response, Compensation and Liability Act, or CERCLA, the U.S. EPA and, in some instances, private parties have the authority to impose joint and several liability for the remediation of contaminated properties upon generators of waste, current and former site owners and operators, transporters and other potentially responsible parties, regardless of fault or the legality of the original disposal activity. Many states, including Indiana, have statutes and regulatory authorities similar to CERCLA and to the U.S. EPA. We have a number of waste handling agreements with various contractors to properly dispose of our electric arc furnace dust and certain other waste products of steelmaking. However, we cannot assure you that, even if there has been no fault by us, we may not still be cited as a waste generator by reason of an environmental clean up at a site to which our waste products were transported.

        In addition to RCRA and CERCLA, there are a number of other environmental, health and safety laws and regulations that apply to our facilities and may affect our operations. By way of example and not of limitation, certain portions of the federal Clean Air Act, Clean Water Act, Toxic Substances Control Act, Oil Pollution Act, Safe Drinking Water Act and Emergency Planning and Community Right-to-Know Act, as well as state and local laws and regulations implemented by the regulatory agencies, apply to our facilities' operations. Many of these laws allow both the governments and citizens to bring certain suits against regulated facilities for alleged environmental violations. Finally, any steelmaking company could be subject to certain toxic tort suits brought by citizens or other third parties alleging causes of action such as nuisance, negligence, trespass, infliction of emotional distress, or other claims alleging personal injury or property damage.

Employees

        Our work force consisted of 5,990 full time employees at December 31, 2009 of which approximately 10% were represented by collective bargaining agreements. The largest group of unionized employees is at Steel of West Virginia. The remaining unionized employees are located in 6

22


Table of Contents


different OmniSource metals recycling locations each of which has its own agreement. We believe that our relationship with our employees is good.

Operation
  Covered Employees   Expiration Date  

Steel of West Virginia

    287     June 20, 2014  

OmniSource

    26     April 30, 2012  

    103     October 20, 2010  

    8     November 14, 2010  

    58     May 31, 2011  

    73     September 30, 2011  

    36     September 15, 2012  

Available Information

        Our internet website address is http://www.steeldynamics.com. We make available on our internet website, under "Investor Relations—SEC Filings," free of charge, as soon as reasonably practicable after such materials are electronically filed with, or furnished to, the SEC, our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to those reports, as well as press releases, ownership reports pursuant to Section 16(a) of the Securities Act of 1933, our Code of Ethics for Principal Executive Officers and Senior Financial Officers and any amendments thereto to or waivers thereof, as well as our Audit, Compensation and Nominating and Corporate Governance Committee charters. We do not intend to incorporate the contents of our or any other website into this report.

ITEM 1A.    RISK FACTORS

        Many factors could have an effect on our financial condition, cash flows and results of operations. We are subject to various risks resulting from changing economic, environmental, political, industry, business and financial conditions. The factors described below represent our principal risks.

Risks Related to our Industry

Our industry is affected by global economic factors including the risk of a prolonged recession.

        Our financial results are substantially dependent upon overall economic conditions in the United States, in Europe and in Asia. A prolonged or a deepening recession in the United States, or globally, could substantially further decrease the demand for our products below already currently depressed levels and adversely affect our business. Many of our products are commodities, subject to cyclical fluctuations in supply and demand in both metal consuming industries and in construction. Metals industries have historically been vulnerable to significant declines in consumption and product pricing during prolonged periods of economic downturn such as at present. Likewise, the pace of construction activity has historically slowed significantly during economic downturns and is at historically low levels today.

        Our business is also dependent upon certain industries, such as commercial and government construction, energy, metals service centers, automotive, petrochemical and original equipment manufacturing and these are also cyclical in nature. Therefore, these industries may experience significant fluctuations in demand for our products based on economic conditions, energy prices, consumer demand and infrastructure funding decisions by governments. Many of these factors are beyond our control. As a result of the volatility in the industries we serve, we may have difficulty increasing or maintaining our level of sales or profitability. If the industries we serve continue to suffer a prolonged downturn, then our business may be further adversely affected.

23


Table of Contents


Our level of production and our sales and earnings are subject to significant fluctuations as a result of the cyclical nature of the steel industry and some of the industries we serve.

        The steel manufacturing business is cyclical in nature, and the price of the steel we make may fluctuate significantly due to many factors beyond our control. The timing and magnitude of these price fluctuations are difficult to predict. The sale of our manufactured steel products is directly affected by demand for our products in other cyclical industries, such as the automotive, oil and gas, gas transmission, residential and commercial/industrial construction, commercial equipment, rail transportation, appliance, agricultural and durable goods industries. Currently, the domestic automotive industry, which is a major consumer of new steel and a major generator of steel scrap, is still suffering from a prolonged and unprecedented downturn, continuing to threaten its financial viability, despite massive government assistance. Continued economic difficulties, stagnant economies, supply/demand imbalances and currency fluctuations in the United States or globally could further decrease the demand for our products or increase the amount of imports of steel into the United States, which would decrease our sales, margins and profitability.

The scrap metals recycling industry has historically been, and is expected to remain, highly cyclical. A prolonged period of currently low scrap prices or a further fall in scrap metal prices, such as the one that began during the latter part of 2008, could have a material adverse effect on our metals recycling operations' results. When inbound scrap flows are weak it reduces our ability to obtain, process and sell recycled metals.

        Scrap metal prices are volatile and operating results within the metals recycling industry, in general, have historically been cyclical, and are expected to remain, highly cyclical in nature. Similarly, but not necessarily paralleling the price fluctuations in the steel business, the purchase prices for automobile bodies and various other grades of obsolete and industrial scrap, as well as the selling prices for processed and recycled scrap metals we utilize in our own manufacturing process or we resell to others through our metals recycling operations, are also currently and may continue to be highly volatile. As a metals recycler, we may attempt to respond to changing recycled metal selling prices by adjusting the scrap metal purchase prices we would pay, but our ability to do this may be limited by competitive or other factors and this, in turn, could adversely affect our sales and profitability. After rising during 2007 and through the summer of 2008, scrap metal prices in global markets fell sharply beginning in the late summer of 2008 as a result of collapsing demand and the resulting excess supply in the industry. The fall in prices during this period adversely affected the results of metals recycling companies, including our metals recycling company, OmniSource Corporation.

        Scrap metal prices are also sensitive to trends in other cyclical industries, such as the automotive and construction industries, and are also adversely affected by increases in steel imports into the United States, which may have an adverse impact on steel production in the United States. And this could have a corresponding adverse impact on the demand for recycled metal from our metals recycling operations. In the past, substantial price decreases during periods of economic weakness have not always been offset by commensurate price increases during periods of economic strength. Although scrap prices have stabilized somewhat, the timing and extent of factors that will lead to a recovery to inbound flows of scrap cannot be predicted. Recovery of inbound volumes will likely depend on a broader recovery from the current global economic downturn, although the length and nature of business cycles affecting the scrap metal industry have historically been unpredictable. If the downturn in scrap metal realized margins were to be protracted, this would materially and adversely affect our revenues and profitability from our metals recycling operations.

24


Table of Contents


Imports of steel into the United States have in the past adversely affected, and may yet again adversely affect, U.S. steel prices, which could impact our sales, margins and profitability.

        Excessive imports of steel into the United States as a result of excess world supply, have in recent years exerted, and may again in the future exert, downward pressure on U.S. steel prices and may reduce or may negatively affect our ability to increase our sales, margins, and profitability. U.S. steel producers compete with many foreign producers, including those in China. Competition from foreign producers is typically strong and is periodically exacerbated by weakening of the economies of certain foreign steelmaking countries. Greater steel exports to the United States tend to occur at depressed prices when steel producing countries experience periods of economic difficulty, decreased demand for steel products or excess capacity.

        In addition, we believe the downward pressure on, and periodically depressed levels of, U.S. steel prices in some recent years have been further exacerbated by imports of steel involving dumping and subsidy abuses by foreign steel producers. Some foreign steel producers are owned, controlled or subsidized by foreign governments. As a result, decisions by these producers with respect to their production, sales and pricing are often influenced to a greater degree by political and economic policy considerations than by prevailing market conditions, realities of the marketplace or consideration of profit or loss. However, while some tariffs and quotas are currently in effect for certain steel products imported from a number of countries that have been found to have been unfairly pricing steel imports to the U.S., many of these are only short-lived. When such tariffs or duties expire or if others are further relaxed or repealed, or if relatively higher U.S. steel prices make it attractive for foreign steelmakers to export their steel products to the United States, despite the presence of duties or tariffs, the resurgence of substantial imports of foreign steel could create downward pressure on U.S. steel prices.

China's current steelmaking overcapacity in relation to its steel consumption could have a material adverse effect on domestic and global steel pricing and could result in increased steel imports into the United States.

        A significant factor in the worldwide volatility of steel pricing in recent years was the explosive growth in Chinese steel consumption in relation to its domestic production, which, until the third quarter of 2008, had vastly outpaced that country's capacity to produce steel in sufficient quantity to serve its internal demand. The shortage of Chinese domestic steel supply, during this time period, resulted not only in heightened Chinese demand for imported steel and other raw materials, with a consequent upward spiral in worldwide steel pricing for finished steel products, but also led to a rapid and significant expansion of steel production capacity in China, as well as many of the commodities, supplies and services utilized in steelmaking. However, the subsequent drop in Chinese steel consumption that began in 2008 and continued in 2009, in addition to the continued utilization of a large amount of outdated, inefficient and government subsidized production capacity, has resulted in a situation in which China's steel producing capacity currently exceeds that country's demand for many kinds of steel products that we produce, making China a net exporter of millions of tons of steel in 2008 and 2009. Therefore, a combination of a slowdown in China's economic growth rate and steel consumption, coupled with its own expansion of steelmaking capacity, could result in a substantial further weakening of both domestic and global steel demand and steel pricing. Also, should Chinese steelmaking capacity remain the same or further increase, or should its demand either not increase or further weaken, China might not only remain a net exporter of steel but many Asian and European steel producers whose steel output previously fed China's steel import needs could find their way into the U.S. market, through increased steel imports, causing a further erosion of margins or negatively impacting our ability to increase our prices.

25


Table of Contents


The worldwide economic downturn that began in 2008 and the difficult conditions in the global industrial, capital and credit markets that resulted, have adversely affected and may continue to adversely affect our business and our industry, as well as the industries of many of our customers and suppliers upon whom we are dependent.

        Many of the markets in which our customers participate, such as the automotive, consumer products, original equipment, manufacturing, commercial, residential and government construction and metals service center industries, are also cyclical in nature and experience significant fluctuations in demand for our steel products based on economic conditions, consumer demand, raw material and energy costs, and decisions by our government to fund or not fund infrastructure projects such as highways, bridges, schools, energy plants, railroads and transportation facilities. Many of these factors are beyond our control. These markets are highly competitive, to a large extent driven by end-use markets, and may experience overcapacity, all of which may affect demand for and pricing of our products.

        Recent declines in consumer and business confidence and spending, together with severe reductions in the availability and cost of credit, as well as volatility in the capital and credit markets, have adversely affected the business and economic environment in which we operate and the profitability of our business. We are exposed to risks associated with the creditworthiness of our suppliers and customers. Moreover, the current worldwide financial crisis has reduced the availability of credit to fund or support the continuation and expansion of our customers' business operations. The inability of our customers or of their customers to access credit adversely affects our business by reducing our sales and by increasing our exposure to losses from uncollectible customer accounts. These conditions and continued disruption of the credit markets could result in financial instability of some of our suppliers and customers, the consequences of such adverse effects could include the interruption of production at the facilities of our customers, the reduction, delay or cancellation of customer orders, delays or interruptions of the supply of raw materials we purchase, and bankruptcy of customers, suppliers or other creditors. Any of these events may adversely affect our cash flow, profitability and financial condition.

        Moreover, the current worldwide financial crisis has reduced the availability of credit to fund or support the continuation and expansion of our customers' business operations. Many lenders and institutional investors have reduced and, in some cases, ceased to provide funding to borrowers. Therefore, continued disruption of the credit markets has affected and could continue to adversely affect our customers' access to credit which supports the continuation and expansion of their businesses and could result in contract cancellations or suspensions, payment delays or defaults by our customers.

Volatility and major fluctuations in scrap metal and pig iron prices and our potential inability to pass such higher costs on to our customers may constrain operating levels and reduce profit margins.

        Steel producers require large amounts of raw materials, including scrap metal and scrap substitute products such as pig iron, pelletized iron and other supplies such as graphite electrodes and ferroalloys. Our vertical integration into the metals recycling business through our OmniSource subsidiary and into the iron making business, through our Iron Dynamics and the recent start-up of our Mesabi Nugget operations will enable us to be our own supplier for some of our metallics requirements. However, we may still need to rely on other metallics and raw material suppliers, as well as upon general industry supply conditions.

        Purchase prices for auto bodies, scrap metal and scrap substitute products such as pig iron that we consume, and selling prices for scrap and recycled metals that we sell to third parties are volatile and beyond our control. While OmniSource attempts to respond to changing recycled metal selling prices through adjustments to its metal purchase prices, its ability to do so is limited by competitive and other market factors. Changing prices could potentially impact the volume of scrap metal available to the company and the volume and realized margins of processed metal sold by the company.

26


Table of Contents

        The availability and prices of raw materials may also be negatively affected by new laws and regulations, allocation by suppliers, interruptions in production, accidents or natural disasters, changes in exchange rates, worldwide price fluctuations, and the availability and cost of transportation.

        If prices for ferrous metallics and energy increase by a greater margin than corresponding price increases for the sale of our steel products, we may not be able to recoup such cost increases from increases in the selling prices of steel products, or our inability to pass on all or any substantial part of such cost increases through scrap or other surcharges or to provide for our customers' needs because of the potential unavailability of key raw materials or other inputs, may result in production curtailments or may otherwise have a material adverse effect on our business, financial condition, results of operations or prospects.

The cost and availability of electricity and natural gas are also subject to volatile market conditions.

        Steel producers like us consume large amounts of energy, inasmuch as mini-mills melt steel scrap in electric arc furnaces and use natural gas to heat steel billets for rolling into finished products. We rely on third parties for the supply of energy resources we consume in our steelmaking activities. The prices for and availability of electricity, natural gas, oil and other energy resources are all also subject to volatile market conditions, often affected by weather conditions as well as political and economic factors beyond our control. As large consumers of electricity and gas, we must have dependable delivery in order to operate. Accordingly, we are at risk in the event of an energy disruption. Prolonged black-outs or brown-outs or disruptions caused by natural disasters or by political considerations would substantially disrupt our production. Moreover, much of our finished steel products is typically delivered by truck. Rapid increases in the price of fuel attributable to increases in crude oil prices would have a negative impact on our costs or on the costs of many of our customers. In addition, changes in certain environmental regulations in the U.S., including those that may impose output limitations or higher costs associated with climate change or greenhouse gas emissions legislation, could substantially increase the cost of manufacturing and raw materials, such as energy, to U.S. steel producers.

Fluctuations in the value of the United States dollar relative to other currencies may adversely affect our business.

        Fluctuations in the value of the dollar can be expected to affect our business. A strong U.S. dollar makes imported metal products less expensive, potentially resulting in more imports of steel products into the U.S. by our foreign competitors, while a weak U.S. dollar may have the opposite impact on imports.

Compliance with and changes in environmental and remediation requirements could result in substantially increased capital requirements and operating costs.

        Existing laws or regulations, as currently interpreted or as may be interpreted in the future, as well as future laws or regulations, may have a material adverse effect on our results of operation and financial condition.

        We are subject to comprehensive local, state, federal and international statutory and regulatory environmental requirements relating to, among other things:

27


Table of Contents

        Compliance with environmental laws and regulations, which affect both our steelmaking and our metals recycling and ironmaking operations, is a significant factor in our business. We are required to obtain and comply with environmental permits and licenses, and failure to obtain or renew or the violation of any permit or license, if not remedied, could result in substantial fines and penalties, suspension of operations or the closure of a subject facility. Similarly, delays in obtaining permits or unanticipated or costly conditions imposed on such permits, such as permits we are seeking in connection with our plan to engage in the mining of taconite ore close to our Mesabi Nugget facility in Minnesota, could delay a project or affect its profitability. Private parties might also bring claims against us for alleged property damage or personal injury resulting from the environmental impacts of our operations. Moreover, legal requirements change frequently, are subject to interpretation and have tended to become more stringent over time. Uncertainty regarding adequate pollution control levels, testing and sampling procedures, and new pollution control technology are factors that may increase our future compliance expenditures. We are unable to predict the ultimate cost of future compliance with these requirements or their effect on our operations, and we also cannot predict whether such costs can be passed on to customers through product price increases. Although we believe that we are in substantial compliance with all applicable laws and regulations, legal requirements frequently change and are subject to interpretation. New laws, regulations and changing interpretations by regulatory authorities, together with uncertainty regarding adequate pollution control levels, testing and sampling procedures, new pollution control technology and cost benefit analysis based on market conditions are all factors that may increase our future expenditures to comply with environmental requirements. The cost of complying with existing laws or regulations as currently interpreted or reinterpreted in the future, or with future laws or regulations, may have a material adverse effect on our results of operations and financial condition.

        Our manufacturing and recycling operations produce significant amounts of by-products, some of which are handled as industrial waste or hazardous waste. For example, our mills generate electric arc furnace (EAF) dust, which the United States Environmental Protection Agency (USEPA) and other regulatory authorities classify as hazardous waste. EAF dust requires special handling, recycling and disposal.

        In addition, the primary feed materials for the shredders operated by our metals recycling operations are automobile hulks and obsolete household appliances. Approximately 20% of the weight of an automobile hulk consists of unrecyclable material known as shredder fluff. After the segregation of ferrous and saleable nonferrous metals, shredder fluff remains. We, along with others in the recycling industry, interpret federal regulations to require shredder fluff to meet certain criteria and pass a toxic leaching test to avoid classification as a hazardous waste. We also endeavor to remove hazardous contaminants from the feed material prior to shredding. As a result, we believe the shredder fluff we generate is not normally considered or properly classified as hazardous waste. However, if laws or regulations, the interpretation of the laws or regulations, or testing methods change with regard to EAF dust or shredder fluff, we may incur significant additional expenditures.

        The Comprehensive Environmental Response, Compensation and Liability Act ("CERCLA" or "Superfund") enables USEPA and state agencies to recover from owners, operators, generators and transporters the cost of investigation and cleanup of sites which pose serious threats to the environment or public health. In connection with CERCLA and analogous state laws, we may be required to clean up contamination discovered at our sites including contamination that may have been caused by former owners or operators of the sites, conduct additional cleanup at sites where we have already participated in remediation efforts or to take remediation action with regard to sites formerly used in connection with our operations.

28


Table of Contents

        In addition, we may be required to pay for, or to pay a portion of, the costs of remediation at sites to which we sent hazardous wastes for disposal, notwithstanding that the original disposal activity may have complied with all regulatory requirements then in effect. Pursuant to CERCLA, a potentially responsible party can be held jointly and severally liable for all of the cleanup costs associated with a third-party disposal site. In practice, a liable party often splits the costs of cleanup with other potentially responsible parties. We have received notices from USEPA, state agencies and third parties that it has been identified as potentially responsible for the cost of investigating and cleaning up a number of third-party disposal sites. In most cases, many other parties are also named as potentially responsible parties. Based upon information currently available to us, we do not believe the potential cost in connection with the remediation of these sites will have a material effect on our business.

        Because CERCLA can be imposed retroactively on shipments that occurred many years ago, and because USEPA and state agencies are still discovering sites that pose a threat to public health or the environment, we can provide no assurance that we will not become liable in the future for significant costs associated with investigation and remediation of additional CERCLA clean up sites.

        CERCLA, including the Superfund Recycling Equity Act of 1999, limits the exposure of scrap metal recyclers for sales of certain recyclable material under certain circumstances. However, the recycling defense is subject to conducting of reasonable care evaluations of current and potential consuming facilities.

Increased regulation associated with climate change and greenhouse gas emissions could impose significant additional costs on both our steelmaking and metals recycling operations.

        The United States government or various governmental agencies have introduced or are contemplating regulatory changes in response to the potential impacts of climate change. International treaties or agreements may also result in increasing regulation of greenhouse gas emissions, including the introduction of carbon emissions trading mechanisms. Any such regulation regarding climate change and greenhouse gas, or GHG emissions could impose significant costs on our steelmaking and metals recycling operations and on the operations of our customers and suppliers, including increased energy, capital equipment, environmental monitoring and reporting and other costs in order to comply with current or future laws or regulations concerning and limitations imposed on our operations by virtue of climate change and GHG emissions laws and regulations. The potential costs of "allowances," "offsets" or "credits" that may be part of potential cap-and-trade programs or similar future regulatory measures are still uncertain. Any adopted future climate change and GHG regulations could negatively impact our ability (and that of our customers and suppliers) to compete with companies situated in areas not subject to such limitations. From a medium and long-term perspective, we are likely to see an increase in costs relating to our assets that emit significant amounts of greenhouse gases as a result of these regulatory initiatives. These regulatory initiatives will be either voluntary or mandatory and may impact our operations directly or through our suppliers or customers. Until the timing, scope and extent of any future regulation becomes known, we cannot predict the effect on our financial condition, operating performance and ability to compete.

29


Table of Contents

Risks Related to the Business

Our senior secured credit agreement contains, and any future financing agreements may contain, restrictive covenants that may limit our flexibility.

        Restrictions and covenants in our existing debt agreements, including our senior secured credit agreement and any future financing agreements, may impair our ability to finance future operations or capital needs or to engage in other business activities. Specifically, these agreements restrict our ability to:

        A breach of any of the restrictions or covenants could cause a default under our senior secured credit agreement, our senior notes, or our other debt. A significant portion of our indebtedness then may become immediately due and payable if the default is not remedied.

        Under our senior secured revolving credit facility we are required to maintain certain financial covenants tied to our debt and profitability. In addition, we are subject to a monthly borrowing base requirement limiting the maximum availability of our senior secured revolver. Our ability to meet such ratios can be affected by events beyond our control. If a default were to occur, the lenders could elect to declare all amounts outstanding to be immediately due and payable and terminate all commitments to extend further credit. If we are unable to repay those amounts, the lenders could proceed against the collateral granted to them to secure such indebtedness. We have pledged substantially all of our receivables and inventories and all shares of capital stock or other equity interests of the company's subsidiaries and intercompany debt held by us.

We are exposed to risks associated with the current financial crisis.

        Financial markets in the U.S. and abroad have experienced extreme disruption, including severely diminished liquidity and credit availability, resulting both in volatilities in short-term borrowing costs and in severely constrained credit availability and more stringent borrowing terms. Recessionary conditions in the global economy have not appreciably improved and could worsen even further. These conditions may continue to adversely affect our business in the future, particularly if current conditions persist or if there is further deterioration in the world financial markets and major economies. These current business and credit conditions also adversely affect the business of our customers. Difficulties in obtaining capital may lead to their inability to obtain affordable financing to fund their operations, resulting in lower demand for our products. Furthermore, liquidity issues could impair the ability of those with whom we do business to satisfy their obligations to us. Should these constraints on access to credit continue for a prolonged period, some of our customers may struggle and fail to meet their obligations to us, especially if they in turn experience defaults or slow payment on receivables due from

30


Table of Contents


their customers. A prolonged recession could result in our incurring bad debt costs in excess of our expectations and prior experience.

We may face significant price and other forms of competition from other steel producers and scrap processors, which could have a material adverse effect on our business, financial condition, results of operation or prospects.

        The global markets in which steel companies and metals recyclers conduct business are highly competitive and are becoming even more so due to the current prolonged global economic downturn and to consolidations in recent years in the steel and the metal recycling industries. Increased competition could cause us to lose market share, increase expenditures or reduce pricing, any one of which could have a material adverse effect on our business, financial condition, results of operations or prospects.

We are subject to significant risks relating to changes in commodity prices and may not be able to effectively protect against these risks.

        We are exposed to commodity price risk during periods where we hold title to scrap metal products that we may hold in inventory for processing or resale. Prices of commodities, including recycled metals, can be volatile due to numerous factors beyond our control. In an increasing price environment for raw materials, competitive conditions may limit our ability to pass on price increases to our consumers. In a decreasing price environment for processed recycled metal, we may not have the ability to fully recoup the cost of raw materials that we procure, process and sell to our customers. In addition, new entrants into the market areas we serve could result in higher purchase prices for raw materials and lower margins from our recycled metal. We are unable to hedge positions in certain commodities, such as recycled ferrous metal, where no established futures market exists, or, where we may from time to time hedge our positions in certain nonferrous metal transactions, we could incur losses. Thus, our sales and inventory position will be vulnerable to adverse changes in commodity prices, which could materially adversely impact our operating and financial performance.

We may be unable to pass on increases in the cost of ferrous materials and other raw materials to our customers, which would reduce our earnings.

        If from time to time we are unable to pass on periodic increases in ferrous resource and other raw material costs to our customers, we will be less profitable. We may not be able to adjust our product prices, especially in the short-term, to recover the costs of prolonged increases in raw material prices. Our principal raw material is scrap metal derived primarily from junked automobiles, industrial scrap, railroad cars, railroad track materials, agricultural machinery and demolition scrap from obsolete structures, containers and machines. The prices for scrap are subject to market forces largely beyond our control, including demand by U.S. and international steel producers, freight costs and speculation. The prices for scrap have varied significantly, may vary significantly in the future and do not necessarily fluctuate in tandem with the price of steel. Moreover, some of our integrated steel producer competitors are not as dependent as we are on scrap as a part of their raw material melt mix, which, during periods of high scrap costs relative to the cost of blast furnace iron used by the integrated producers, give them a raw material cost advantage over mini-mills. In addition, our operations require substantial amounts of other raw materials, including various types of pig iron, alloys, refractories, graphite electrodes, oxygen, natural gas and electricity, the price and availability of which are also subject to market conditions.

31


Table of Contents


The profitability of our metals recycling operations depends, in part, on the availability of an adequate source of supply.

        We procure our recyclable metal inventory from numerous sources. These suppliers generally are not bound by long-term contracts and have no obligation to sell recyclable metal to us. In periods of low industry prices, suppliers may elect to hold recyclable metal to wait for higher prices or intentionally slow their metal collection activities. If a substantial number of suppliers cease selling recyclable metal to us, we will be unable to recycle metal at desired levels and our results of operations and financial condition could be materially adversely affected. In addition, a slowdown of industrial production in the United States, as has recently occurred, reduces the supply of industrial grades of metal to the metal recycling industry, resulting in our having less recyclable metal available to process and market.

Competition from other materials may have a material adverse effect on our business, financial condition, results of operations or prospects.

        In many applications, steel competes with other materials, such as aluminum and plastics (particularly in the automobile industry), cement, composites, glass and wood. Increased use of or additional substitutes for steel products could adversely affect future market prices and demand for steel products.

We may face risks associated with the implementation of our growth strategy.

        Our growth strategy subjects us to various risks. As part of our growth strategy, we may expand existing facilities, build additional plants, acquire other businesses and steel assets, enter into joint ventures, or form strategic alliances that we believe will complement our existing business. These transactions will likely involve some or all of the following risks:

32


Table of Contents

        These transactions might be required for us to remain competitive, but we may not be able to complete any such transactions on favorable terms or obtain financing, if necessary, for such transactions on favorable terms. Future transactions may not improve our competitive position and business prospects as anticipated, and if they do not, our sales and earnings may be significantly reduced.

Technology, operating and start-up risks, as well as commodity market risks associated with our Mesabi Nugget ironmaking project may prevent us from realizing its anticipated benefits and could result in a loss of all or a part of our investment.

        While we and certain of our current and former joint venture partners built and operated a successful small scale pilot plant on the Mesabi Iron Range in Minnesota for the production of a cost effective iron nugget using Kobe Steel's proprietary ITmK3® ironmaking process, there are technology, operational, market and start-up risks associated with the construction, recent commissioning and start-up of our world's first full scale commercial nugget plant utilizing this technology. Although, we believe this full scale plant should be capable of consistently producing high-quality iron nuggets for use as a scrap substitute feed stock in our steelmaking operations, and in sufficient quantities and at a cost that will compare favorably with the cost of steel scrap and other more conventional scrap substitute products, including pig iron, there can be no assurance that these expectations will be achieved. If we encounter cost overruns, systems or process difficulties during or after start-up or quality control or output restrictions, our capital costs could materially increase, the expected cost benefits from the development of this iron nugget product could be diminished or lost, and we could lose all or a substantial portion of our investment in the project. We could also encounter commodity market risk if, during a sustained period, the cost to manufacture the nuggets is greater than projected or if the relative market price of scrap and other scrap substitutes, for which this iron nugget product is intended as a lower cost substitute, is lower than projected, which could render our nuggets non-economical. Moreover, we are undertaking certain ancillary ventures related to the iron-making process, such as our nearby Mesabi Mining facility currently under construction for the mining and concentration of taconite ore for use in the production of nuggets, a business in which we have no experience and which is also subject to possible permitting and environmental risks and uncertainties.

We are subject to litigation which could adversely affect our profitability.

        We are involved in various routine litigation matters, including administrative proceedings, regulatory proceedings, governmental investigations, environmental matters, and commercial and construction contract disputes.

        We were involved as the sole defendant in a February 1, 2008 lawsuit by Prime Eagle Group Limited, seeking damages in excess of $1.1 billion, but on February 23, 2009, pursuant to our Motion to Dismiss that action, the United States District Court for the Northern District of Indiana granted our Motion to Dismiss, with prejudice and denied the plaintiffs the right to amend their complaint. The plaintiffs in that lawsuit appealed the dismissal to the United States Court of Appeals for the Seventh Circuit and that appeal is still pending.

        We are also involved as one of nine defendants in a September 12, 2008 class action antitrust complaint by Standard Iron Works and others involving alleged antitrust violations of Section 1 of the Sherman Act. We and the other defendants filed a joint Motion to Dismiss these actions and our motion to dismiss was denied. Some discovery will shortly commence in these proceedings. We are contesting and will continue to vigorously contest.

        Due to the uncertain nature of litigation, we cannot predict the outcome of these matters. These matters, however, could have a material adverse affect on our financial condition and profitability.

33


Table of Contents


Litigation is very costly, and the costs associated with prosecuting and defending litigation matters could have a material adverse effect on our financial condition and profitability. Although we are unable to estimate the dollar amount of exposure to loss, if any, in connection with many litigation matters, we make accruals as warranted. We have also asserted insurance claims where appropriate. However, the amounts that we may accrue from time to time could vary significantly from the amounts we actually pay, due to inherent uncertainties and the inherent shortcomings of the estimation process, the uncertainties involved in litigation and other factors.

Unexpected equipment failures may lead to production curtailments or shutdowns.

        Interruptions in our production capabilities could adversely affect our production costs, products available for sales and earnings during the affected period. In addition to equipment failures, our facilities are also subject to the risk of catastrophic loss due to unanticipated events such as fires, explosions or violent weather conditions. Our manufacturing processes are dependent upon critical pieces of steelmaking equipment, such as our furnaces, continuous casters and rolling equipment, as well as electrical equipment, such as transformers. This equipment may, on occasion, be out of service as a result of unanticipated failures. We have experienced and may in the future experience material plant shutdowns or periods of reduced production as a result of such equipment failures.

Some of our operations present significant risk of injury or death.

        The industrial activities conducted at our facilities present significant risk of serious injury or death to our employees, customers or other visitors to our operations, notwithstanding our safety precautions, including our material compliance with federal, state and local employee health and safety regulations. While we have in place policies and procedures to minimize such risks, we may nevertheless be unable to avoid material liabilities for an injury or death. Even though we maintain workers' compensation insurance to address the risk of incurring material liabilities for injury or death, there can be no assurance that the insurance coverage will be adequate or will continue to be available on the terms acceptable to us, or at all, which could result in material liabilities for an injury or death.

Governmental agencies may refuse to grant or renew some of our licenses and permits.

        We must receive licenses, permits and approvals from state and local governments to conduct certain of our operations or to develop or acquire new facilities. Governmental agencies often resist the establishment of certain types of facilities in their communities, including scrap metal collection and processing facilities. There can be no assurance that future approvals, licenses and permits will be granted or that we will be able to maintain and renew the approvals, licenses and permits we currently hold, and failure to do so could have a material adverse effect on our results of operations and financial condition.

Our common stock price may fluctuate substantially.

        The market price of our common stock has experienced, and may continue to experience, significant volatility. Numerous factors, including many over which we have no control, may have a significant impact on the market price of our common stock. These risks include those described or referred to in this "Risk Factors" section and in the other documents incorporated herein by reference, as well as, among other things:

34


Table of Contents

        In addition, the stock market in recent years has experienced significant price and trading volume fluctuations that often have been unrelated or disproportionate to the operating performance of individual companies. These broad market fluctuations may adversely affect the price of our common stock, regardless of our operating performance. As a result of these factors, among others, the value of your investment may decline because a decrease in the market price of our common stock would likely adversely impact the trading price of the notes.

Payment of dividends will depend on our future financial condition and performance.

        While our board of directors has been authorizing the payment of regular quarterly cash dividends on shares of our common stock, the timing and amount of future dividends will depend on the board's assessment of our operations, financial condition, projected cash needs, contractual restrictions or restrictions imposed by applicable law and other factors. We cannot guarantee that we will continue to declare dividends or declare them at the same or similar rates. In addition, our senior secured credit agreement and the indenture relating to our notes restrict the amount of cash dividends we can pay.

ITEM 1B.    UNRESOLVED STAFF COMMENTS

        None.

35


Table of Contents


ITEM 2.    PROPERTIES

        The following table describes our more significant properties as of December 31, 2009. These properties are owned by us and are not subject to any significant encumbrances. We believe these properties are suitable and adequate for our current operations and are appropriately utilized.

Operations
  Location   Property Type   Site
Acreage
Owned
  Site
Acreage
Leased
 

Steel Operations

                     
 

Flat Roll Division:

                     
   

Butler Operations

  Butler, IN   Steel Manufacturing and Coating Facility     1,087      
   

Jeffersonville Operations

  Jeffersonville, IN   Steel Coating Facility         25  
 

Structural and Rail Division

  Columbia City, IN   Steel Manufacturing Facility     672      
 

Engineered Bar Division

  Pittsboro, IN   Steel Manufacturing and Finishing Facility     285      
 

Roanoke Bar Division

  Roanoke, VA   Steel Manufacturing Facility     301      
 

Steel of West Virginia

  Huntington, WV   Steel Manufacturing and Finishing Facility     47      
 

The Techs

  Pittsburgh, PA   Steel Coating Facilities     16     2  

Metals Recycling and Ferrous Resources

                     
 

OmniSource:

                     
   

Indiana

  Multiple Cities   Ferrous and Nonferrous Scrap Processing     620     25  
   

Ohio

  Multiple Cities   Ferrous and Nonferrous Scrap Processing     239     22  
   

Michigan

  Multiple Cities   Ferrous and Nonferrous Scrap Processing     301     11  
   

Georgia

  Multiple Cities   Ferrous and Nonferrous Scrap Processing     103     1  
   

South Carolina

  Multiple Cities   Ferrous and Nonferrous Scrap Processing     223     100  
   

North Carolina

  Multiple Cities   Ferrous and Nonferrous Scrap Processing     506     6  
   

Virginia

  Multiple Cities   Ferrous and Nonferrous Scrap Processing     188      
   

Tennessee

  Multiple Cities   Ferrous and Nonferrous Scrap Processing     44     7  
 

Iron Dynamics

  Butler, IN   Liquid Ironmaking Facility     25      
 

Mesabi Nugget

  Hoyt Lakes, MN   Ironmaking Facility     *     *  
 

Mesabi Mining

  Hoyt Lakes, MN   Iron Ore Mining (under development)     *     *  

Steel Fabrication Operations

                     
 

New Millennium Building Systems:

                     
   

Joist and Deck Operations

  Butler, IN   Steel Fabrication Facility     95      
   

Joist and Deck Operations

  Lake City, FL   Steel Fabrication Facility     75      
   

Joist and Deck Operations

  Salem, VA   Steel Fabrication Facility     62      
   

Joist Operations

  Florence, SC   Steel Fabrication Facility (idle)     48      
   

Joist Operations

  Continental, OH   Steel Fabrication Facility (idle)     54      

Corporate Headquarters

  Fort Wayne, IN   Office Building (116,000 square feet)     20      

*
The Mesabi Nugget and Mesabi Mining properties are located at the site of an open pit taconite mine on the Mesabi Iron Range near Hoyt Lakes, Minnesota. The site encompasses land owned outright by us (including mineral and surface rights) and land for which we acquired a leasehold interest (including mineral and surface rights). The properties were purchased from Cleveland Cliffs, Inc. and the mines were formerly operated by LTV Corporation. Mesabi Mining is currently attempting to obtain the necessary permits to commence mining operations during 2011. The concentrate eventually provided by the mines is intended as a raw material input for the Iron nugget production.

36


Table of Contents

ITEM 3.    LEGAL PROCEEDINGS

        The company as well as its various subsidiaries, is from time to time involved in various lawsuits and/or governmental claims in the ordinary course of business. None of these lawsuits or claims at the present time, singly or in the aggregate, except as disclosed below, is material.

        On February 1, 2008, the company was sued by Prime Eagle Group Limited (Plaintiff), a corporation with its principal place of business in Thailand, alleging damages in excess of $1.1 billion, arising out of Steel Dynamics' activities in providing consulting services to a Thailand-based steel company, Nakornthai Strip Mill Public Company, Limited (NSM) in its operational start-up in 1998. On April 30, 2008, Steel Dynamics filed a Motion to Dismiss the lawsuit,, and on February 23, 2009, the court dismissed the complaint, with prejudice, and denied the plaintiffs leave to amend their complaint. The Plaintiff has appealed this dismissal. All briefs have been filed and oral argument was held on October 8, 2009.

        On September 17, 2008, the company and eight other steel manufacturing companies were served with a class action antitrust complaint, filed in the United States District Court for the Northern District of Illinois in Chicago by Standard Iron Works of Scranton, Pennsylvania, alleging violations of Section 1 of the Sherman Act. The Complaint alleges that the defendants conspired to fix, raise, maintain and stabilize the price at which steel products were sold in the United States, starting in 2005, by artificially restricting the supply of such steel products. Six additional lawsuits, each of them materially similar to the original, have also been filed in the same federal court, each of them likewise seeking similar class certification. All but one of the Complaints purport to be brought on behalf of a class consisting of all direct purchasers of steel products between January 1, 2005 and the present. The other Complaint purports to be brought on behalf of a class consisting of all indirect purchasers of steel products within the same time period. All Complaints seek treble damages and costs, including reasonable attorney fees, pre- and post-judgment interest and injunctive relief. On January 2, 2009, Steel Dynamics and the other defendants filed a Joint Motion to Dismiss all of the direct purchaser lawsuits. On June 12, 2009, however, the Court denied the Motion. The parties are currently in the process of commencing some discovery. Although the company believes that the lawsuits are without merit and plans to aggressively defend these actions, the company cannot presently predict the outcome of this litigation or make any judgment with respect to its potential exposure, if any.

        On March 18, 2009, the company together with its Chairman and Chief Executive Officer, Keith E. Busse, and John Bates, a member of its board of directors, were served with a complaint, captioned Panasuk v. Steel Dynamics, Inc., et al., Civil Action No. 1109cv0066, filed in the United States District Court for the Northern District of Indiana, Fort Wayne Division, purporting to represent a class of purchasers of Steel Dynamics common stock between January 26, 2009 and March 11, 2009. The complaint, which was amended on July 13, 2009, alleged securities fraud in connection with the company's issuance of certain earnings guidance and sought damages in an unspecified amount. On August 31, 2009, the company and Messrs. Busse and Bates filed Motions to Dismiss the amended complaint. On December 21, 2009, the District Court granted all of the defendants' motions to dismiss and entered a final judgment of dismissal. Plaintiffs did not appeal.

        By letter dated November 23, 2009, OmniSource Corporation was served with a proposed administrative order from the Ohio Environmental Protection Agency which alleges violations of various air pollution control rules and, if made final, would require additional dust control measures and impose civil penalties in the amount of $325,600. The company is currently in settlement discussions with the agency to resolve its claims.

37


Table of Contents


PART II

ITEM 5.    MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

        The information required by Item 5 with respect to securities authorized for issuance under equity compensation plans is set forth in Part III, Item 12 of this Form 10-K. Our common stock trades on The NASDAQ Global Select Stock Market under the symbol STLD. The following share data has been adjusted to reflect our two-for-one stock split effective March 2008. The reported high and low "intra-day" sales prices of our common stock and our dividend information for the two most recent fiscal years are set forth in the following table (in dollars):

 
  Common Stock
Market Price
   
 
 
  Dividends
Declared
 
 
  High   Low  

2008

                   
 

First Quarter

  $ 35.28   $ 21.14   $ .100  
 

Second Quarter

    40.92     32.28     .100  
 

Third Quarter

    38.67     15.47     .100  
 

Fourth Quarter

    16.94     5.18     .100  

2009

                   
 

First Quarter

  $ 14.39   $ 5.95   $ .100  
 

Second Quarter

    16.68     8.18     .075  
 

Third Quarter

    18.56     12.43     .075  
 

Fourth Quarter

    18.63     13.07     .075  

        As of February 18, 2010 we had 216,333,971 shares of common stock outstanding and held beneficially by approximately 30,500 stockholders based on our security position listing. Because many of the shares were held by depositories, brokers and other nominees, the number of registered holders (approximately 1,750) is not representative of the number of beneficial holders.

        We declared our first quarterly cash dividend during July 2004 and continued quarterly dividends throughout 2009. Our board of directors, along with executive management, approves the payment of dividends on a quarterly basis. The determination to pay cash dividends in the future will be at the discretion of our board of directors, after taking into account various factors, including our financial condition, results of operations, outstanding indebtedness, current and anticipated cash needs and growth plans. In addition, the terms of our senior secured revolving credit agreement and the indenture relating to our senior notes restrict the amount of cash dividends we can pay.

38


Table of Contents

Total Return Graph

COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN*
Among Steel Dynamics, Inc., The NASDAQ Composite Index
And The S&P Steel Index

GRAPHIC


*
$100 invested on 12/31/04 in stock or index, including reinvestment of dividends.
Fiscal year ending December 31.

Copyright© 2010 S&P, at division of The McGraw-Hill Companies Inc. All rights reserved.

39


Table of Contents

ITEM 6.    SELECTED FINANCIAL DATA

        The following table sets forth the selected consolidated financial and operating data of Steel Dynamics Inc. The selected consolidated financial and operating data as of and for each of the years in the five-year period ended December 31, 2009 were derived from our audited consolidated financial statements. You should read the following data in conjunction with Management's Discussion and Analysis of Financial Condition and Results of Operations and our consolidated financial statements and notes appearing elsewhere in this Form 10-K.

        You should also read the following information in conjunction with the data in the table on the following page:

40


Table of Contents

 
  Years Ended December 31,  
 
  2009   2008   2007   2006   2005  
 
  (dollars in thousands, except per share data)
 

Operating data:

                               

Net sales

  $ 3,958,806   $ 8,080,521   $ 4,384,844   $ 3,238,787   $ 2,184,866  

Gross profit

    399,076     1,231,259     915,694     829,992     485,149  

Operating income

    119,531     846,368     690,745     659,114     393,175  

Net income (loss)

    (11,019 )   454,514     394,157     396,707     221,785  

Net income (loss) attributable to Steel Dynamics, Inc. 

    (8,184 )   463,386     394,566              

Basic earnings (loss) per share

 
$

(.04

)

$

2.45
 
$

2.12
 
$

2.11
 
$

1.24
 
                       

Weighted average common shares outstanding

    200,704     189,140     186,321     187,863     178,484  
                       

Diluted earnings (loss) per share

  $ (.04 ) $ 2.38   $ 2.01   $ 1.89   $ 1.09  
                       

Weighted average common shares and share equivalents outstanding

    200,704     194,586     196,805     211,548     206,568  
                       

Dividends declared per share

  $ .325   $ .400   $ .300   $ .250   $ .100  
                       

Other financial data:

                               

Capital expenditures

  $ 330,052   $ 412,497   $ 395,198   $ 128,618   $ 63,386  

Ratio of earnings to fixed charges

    .78x     5.44x     9.37x     17.20x     10.04x  

Other data:

                               

Shipments (net tons, except nonferrous)

                               
 

Steel operations

    4,045,787     5,608,898     5,550,207     4,757,610     3,559,371  
 

Metals recycling and ferrous resources

                               
   

Ferrous metals

    4,066,834     5,553,540     1,090,758     90,149      
   

Nonferrous metals (thousands of pounds)

    780,084     911,832     137,417          
   

Iron Dynamics

    222,553     256,388     246,702     239,434     221,480  
 

Steel fabrication operations

    145,259     286,612     276,836     236,012     141,125  
 

Other

    90,687     176,114     127,537     90,586     97,843  

Steel operations production (net tons)

   
4,187,526
   
5,584,019
   
5,471,314
   
4,696,455
   
3,616,480
 

Shares outstanding (in thousands)

   
216,000
   
181,820
   
190,324
   
193,967
   
172,736
 

Number of employees

    5,990     6,652     5,940     3,490     1,795  

Balance sheet data:

                               

Cash and equivalents

  $ 9,008   $ 16,233   $ 28,486   $ 29,373   $ 65,518  

Working capital

    861,242     738,934     791,703     639,204     518,556  

Net property, plant and equipment

    2,254,050     2,072,857     1,652,097     1,136,703     999,969  

Total assets

    5,129,872     5,253,577     4,519,453     2,247,017     1,757,687  

Long-term debt (including current maturities)

    2,222,754     2,650,384     2,029,845     438,878     440,575  

Stockholders' equity

    2,003,265     1,632,313     1,540,234     1,231,108     879,868  

41


Table of Contents

ITEM 7.    MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATION

Forward-Looking Statements

        This report contains some predictive statements about future events, including statements related to conditions in domestic and global economies, conditions in the steel and recycled metals marketplaces, our revenue, costs of purchased materials, future profitability and earnings, and the operation of new or existing facilities. These statements are intended to be made as "forward-looking," subject to many risks and uncertainties, within the safe harbor protections of the Private Securities Litigation Reform Act of 1995. Such predictive statements are not guarantees of future performance, and actual results could differ materially from our current expectations. Factors that could cause such predictive statements to turn out other than as anticipated or predicted include, among others: the effects of a prolonged or deepening recession on industrial demand; general or specific sector (i.e., automotive, consumer appliance or construction) economic conditions affecting steel or recycled metals consumption; the impact of price competition, whether domestic or the result of foreign imports; difficulties in integrating acquired businesses; risks and uncertainties involving new products or new technologies; changes in the availability or cost of steel scrap or substitute materials; increases in energy costs; occurrence of unanticipated equipment failures and plant outages; labor unrest; and the effect of the elements on production or consumption.

        More specifically, we refer you to the sections titled Special Note Regarding Forward-Looking Statements and Risk Factors in this report, as well as in other reports which we file with the Securities and Exchange Commission, for a more detailed discussion of some of the many factors, variable risks and uncertainties that could cause actual results to differ materially from those we may have expected or anticipated. These reports are available publicly on the SEC web site, www.sec.gov, and on our web site, www.steeldynamics.com. Forward-looking or predictive statements we make are based upon information and assumptions, concerning our businesses and the environments in which they operate, which we consider reasonable as of the date on which these statements are made. Due to the foregoing risks and uncertainties however, as well as, matters beyond our control which can affect forward-looking statements, you are cautioned not to place undue reliance on these predictive statements, which speak only as of the date of this report. We undertake no duty to update or revise any forward-looking statement, whether as a result of new information, future events or otherwise.

Operating Statement Classifications

        Net Sales.    Net sales from our operations are a factor of volumes shipped, product mix and related pricing. We charge premium prices for certain grades of steel, product dimensions, certain smaller volumes, and for value-added processing or coating of the steel products. Except for our steel fabrication operations segment, we recognize revenue from sales and the allowance for estimated costs associated with returns from these sales at the time the title of the product is transferred to the customer. Provision is made for estimated product returns and customer claims based on estimates and actual historical experience. Net sales from steel fabrication operations are recognized from construction contracts utilizing a percentage-of-completion method, which is based on the percentage of steel consumed to date as compared to the estimated total steel required for each contract.

        Costs of Goods Sold.    Our costs of goods sold represent all direct and indirect costs associated with the manufacture of our products. The principal elements of these costs for our steel operations are steel scrap and scrap substitutes (which represent the most significant single component of our consolidated costs of goods sold), alloys, zinc, natural gas, argon, direct and indirect labor and related benefits, electricity, oxygen, electrodes, depreciation, materials and freight. The principal elements of these costs for our metals recycling and ferrous resources operations are the costs of procuring the unprocessed scrap materials, material transportation costs, and processing expenses, such as direct and

42


Table of Contents


indirect labor, depreciation and utilities. The principal elements of these costs for our steel fabrication operations include purchased steel and direct and indirect labor and related benefit expenses.

        Selling, General and Administrative Expenses.    Selling, general and administrative expenses consist of all costs associated with our sales, finance and accounting, and administrative departments. These costs include, among other items, labor and related benefits, professional services, insurance premiums, property taxes, profit sharing, and amortization of intangible assets.

        Interest Expense, net Capitalized Interest.    Interest expense consists of interest associated with our senior credit facilities and other debt (described in the notes included herein to our financial statements) net of interest costs that are required to be capitalized during the construction period of certain capital investment projects.

        Other (Income) Expense, net.    Other income consists of interest income earned on our temporary cash deposits and any other non-operating income activity, including gains on certain short-term investments and income from non-consolidated investments accounted for under the equity method. Other expense consists of any non-operating costs, including expenses from the termination of an interest rate swap in 2009.

Overview

        We are one of the largest steel producers and one of the largest metals recyclers in the United States based on a current estimated annual steelmaking capability of 6.3 million tons and actual metals recycling shipping volumes during 2008 and 2009 of 5.6 million tons and 4.1 million tons of ferrous materials, respectively, and 912 million pounds and 780 million pounds of nonferrous metallics, respectively. Our steel production, excluding The Techs, during 2008 and 2009 was 4.8 million tons and 3.5 million tons, respectively. In 2009, we reported net sales of $4.0 billion and an operating margin of 3%, as compared to net sales of $8.1 billion and an operating margin of 10% during 2008.

        The primary sources of our revenues are from the manufacture and sale of steel products; processing and sale of recycled ferrous and nonferrous metals; and to a lesser degree, fabrication and sale of steel joist and decking products. Our operations are managed and reported based on three operating segments: steel operations, metals recycling and ferrous resources operations, and steel fabrication operations.

        As a result of prevailing domestic and global economic conditions in the second half of 2008 and throughout 2009, there has been significant declines in, among others, non-residential construction, residential construction and automobile manufacturing activity. Consistently, as these activities impacted the demand for our products, 2009 was a challenging year for our company and the domestic steel manufacturing and metals recycling industries. Specifically, as a result of this environment, we have experienced deterioration in the volumes of orders and prices we can charge our customers, and as a consequence our revenues and profitability have also declined.

        Despite this challenging environment, we believe we are well-positioned to weather this economic downturn. Our financial strategy currently includes a commitment to improve our leverage metrics, while allowing for long-term sustainable growth and maintaining appropriate liquidity levels. Our commitment to these goals drives a focus on controlling costs and maximizing per unit margins, managing capital investments, and disciplined growth.

        Although the depth and duration of the current economic downturn has been more pronounced than previous recessions, we believe our financial strategy, coupled with our competitive advantages of maintaining a low, variable cost structure; producing a diversified, value-added product offering; controlling a secure supply of recycled ferrous metals; and having an experienced senior management

43


Table of Contents


team and entity-wide entrepreneurial culture, has positioned us to navigate the economic downturn in a manner that can strengthen our industry leadership position in a recovery.

2010 Outlook

        Looking ahead to 2010, we remain cautious concerning demand for our products given the current economic environment; however, we are seeing positive signs as our order logs related to sheet steel products, special bar-quality products and ferrous and nonferrous materials are improving. We currently anticipate increased utilization rates in both our steel and metals recycling operations during the year. Given the continued weakness in the non-residential construction markets, we currently do not anticipate material improvement during 2010 in our fabrication or structural steels operations.

        Our focus will continue to be on enhanced liquidity, disciplined cost control and revenue optimization, while continuing to manage risk in an uncertain and volatile economic environment. We currently plan to spend less than $150 million in capital investments during 2010, of which over 50% are currently within our steel operations. We believe our current possible sources of cash are adequate to meet the cash requirements associated with these possible investments. As we progress through the year, if our markets and liquidity levels warrant, we may approve additional capital investments, or delay already planned projects.

Operating Results 2009 vs. 2008

        Net loss was $8.2 million, or $0.04 per diluted share during 2009, compared with net income of $463.4 million, or $2.38 per diluted share, during 2008. During 2009, our net sales decreased $4.1 billion, or 51%, to $4.0 billion. Our gross margin percentage was 10% and 15% during 2009 and 2008, respectively. Most notably, beginning in the fourth quarter of 2008 and persisting throughout 2009, our realized gross margins have been significantly lower than historical results driven by the aforementioned economic recession which has driven down both our sales prices and volumes, thereby decreasing our total revenues while increasing our cost to convert our raw materials to finished goods per unit. We experienced our lowest gross margin percentage results during the first quarter of 2009 as we recorded a non-cash negative inventory valuation adjustment of $83.3 million pertaining primarily to the rapid decline in sheet product pricing. Since that time we have generally experienced a positive trend line achieving gross margins of 9%, 18% and 13%, for the second, third and fourth quarters of 2009, respectively. This positive trend is continuing and is currently being driven generally by increased volumes and pricing in our sheet product and metals recycling operations.

    Steel Operations    

        Steel Operations.    Steel operations consist of our five electric-arc furnace mini-mills, producing steel from steel scrap, utilizing continuous casting, automated rolling mills, and various downstream finishing facilities, including The Techs operations. In both 2009 and 2008, our steel operations accounted for 63% of our consolidated net sales, and accounted for 81% in 2007. Collectively, our steel operations sell directly to end users and service centers. These products are used in numerous industry sectors, including the automotive, construction, commercial, transportation and industrial machinery markets.

44


Table of Contents

 
  Year Ended December 31,  
 
  2009    
  2008    
  2007    
 

Shipments (net tons)

                                     
 

Flat Roll Division

    2,060,874           2,328,805           2,495,360        
 

The Techs

    644,612           823,661           454,877        
                                 
   

Sheet products

    2,705,486     67 %   3,152,466     56 %   2,950,237     53 %
 

Structural and Rail Division

   
477,116
         
1,095,095
         
1,174,776
       
 

Engineered Bar Products Division

    303,616           566,190           546,585        
 

Roanoke Bar Division

    356,829           530,452           595,041        
 

Steel of West Virginia

    202,740           264,695           283,568        
                                 
   

Long products

    1,340,301     33 %   2,456,432     44 %   2,599,970     47 %
   

Total shipments

   
4,045,787
         
5,608,898
         
5,550,207
       
 

Intra-company

    (251,665 )   6 %   (447,729 )   8 %   (494,576 )   9 %
                                 
   

External shipments

    3,794,122           5,161,169           5,055,631        
                                 

        Our 2009 average steel operations' selling price per ton shipped decreased $322 compared with 2008, with the realization of modest increases during the second half of 2009. Steel shipments decreased 28% during 2009, as compared to 2008. We experienced decreased shipping volumes at each of our steel operations facilities during 2009, particularly during the first half of the year, shipping 40% of the year's total volume. Our steel shipping volumes increased during the second half of 2009, most significantly within our sheet product operations. We have seen increased demand for our sheet steels beginning in the third quarter of 2009 and remaining steady into the first quarter of 2010. The non-residential construction markets have declined most significantly; therefore, our long products operations have suffered a greater degree of deterioration in profitability during 2009 than our sheet operations.

        Metallic raw materials used in our electric arc furnaces represent our most significant manufacturing cost. Our metallic raw material cost per net ton consumed in our steel operations decreased $189 during 2009, to $232, as compared to 2008. During 2009 and 2008, our metallic raw material costs represented 52% and 63% of our steel operation's total manufacturing costs, excluding the operations of The Techs, which purchases, rather than produces, the steel it further processes. This decrease was the result of significantly lower steel production during 2009, which caused the components of our cost structure to shift.

        As mentioned, the existing unfavorable economic conditions beginning in the second half of 2008 and persisting throughout 2009 caused severe reductions in demand from the industries our steel products primarily serve, such as the automotive, non-residential construction, residential construction and transportation industries. Decreases in demand resulted in decreased volume and pricing coupled with increased per unit costs. Steel operations represented $259.6 million, or 65%; $927.8 million, or

45


Table of Contents


75%; and $801.5 million, or 88%, of our consolidated gross margin during 2009, 2008, and 2007, respectively.


Steel Operations Selling Prices and Volumes

GRAPHIC

    Metals Recycling and Ferrous Resources Operations    

        Metals Recycling and Ferrous Resources Operations.    This operating segment includes our metals recycling operations, liquid pig iron manufacturing facility and iron nugget manufacturing start-up facility. In both 2009 and 2008, our metals recycling and ferrous resources operations accounted for 31% of our consolidated net sales, and accounted for 9% in 2007.

46


Table of Contents

 
  Year Ended December 31,  
 
  2009   2008   2007  

Ferrous metal shipments (net tons)

                   
 

Combined

    4,066,834     5,553,540     1,090,758  
 

Intra-company

    (1,606,754 )   (2,270,777 )   (445,202 )
               
   

External

    2,460,080     3,282,763     645,556  
               

Non-ferrous shipments (thousands of pounds)

   
780,084
   
911,832
   
137,417
 

Iron Dynamics shipments (net tons)

                   
 

Liquid pig iron

    180,627     163,210     119,989  
 

Hot briquetted iron

    40,443     75,409     113,939  
 

Other

    1,483     17,769     12,774  
               
   

Intra-company

    222,553     256,388     246,702  
               

        Metals recycling and ferrous resources operations accounted for 31% of our 2009 and 2008 consolidated net sales and 36% and 20% of our consolidated gross margin during 2009 and 2008, respectively. Our metals recycling operations primarily engage in the brokerage, collection and processing of ferrous and non-ferrous metals for resale to steel companies, brokers and other metals processors. During 2009, this segment recorded external shipments of 2.5 million tons of ferrous metals and 780.1 million pounds of non-ferrous materials, compared with 3.3 million tons and 911.8 million pounds during 2008, decreases of 25% and 14%, respectively. External shipments for 2009 fell substantially compared to the same period in 2008 due to the continued weak global economy relative to 2008 which caused reduced steel and foundry manufacturing activity resulting in reduced demand for and sources of scrap. During 2009, the metals recycling operations provided approximately 47% of the steel scrap purchased by our steel mills, compared to 41% during 2008. These sales to our steel operations represented 23% of our metals recycling operation's net sales for 2009, as compared to 31% during 2008. Our purchase of Recycle South midyear 2008 increased our metals recycling revenues to external customers, as their location in the Southeastern U.S. provides opportunities to sell to others more profitably than to our own steel operations located primarily in the Midwest.

        Beginning in the third quarter of 2008 and throughout much of 2009, our metals recycling operations experienced periods of deterioration in volumes and margins as demand declined dramatically from the domestic steelmaking and foundry industries. With improvements in steelmaking and foundry utilization rates during the second half of 2009, our metals recycling operations also generally experienced increased volumes and margins. We currently continue to see this trend.

    Steel Fabrication Operations    

        Our steel fabrication operations include three operating and two idled New Millennium Building Systems' plants located in the Midwest and Southeastern part of the United States. Revenues from these plants are generated from the fabrication of trusses, girders, steel joists and steel decking used within the non-residential construction industry. Steel fabrication operations accounted for 4% and 5% of our consolidated net sales and 4% of our consolidated gross margin during 2009 and 2008, respectively. Our average steel fabrication operations' selling price per ton shipped decreased $222, or 17%, during 2009 when compared with 2008. The purchase of various steel products is the largest single cost of production for our steel fabrication operations. During 2009 and 2008, respectively, the cost of steel products purchased represented 70% and 79% of the total cost of manufacturing for our

47


Table of Contents


steel fabrication operations. The weak economy and sharply decreased activity in non-residential construction had a negative impact on this operating segment during 2009. Joist shipments industry-wide fell nearly 60% in 2009 when compared with 2008 levels. In response to this industry downturn, we have idled two of our fabrication plants and reduced staff at the three remaining facilities. We anticipate non-residential construction to remain slow during 2010.


Steel Fabrication Operations Selling Prices and Volumes

GRAPHIC

Consolidated Results 2009 vs. 2008

        Selling, General and Administrative Expenses (SG&A).    Selling, general and administrative expenses (including profit sharing and amortization of intangible assets) were $279.5 million during 2009, as compared to $384.9 million during 2008, a decrease of $105.4 million, or 27%. Our SG&A expenses represented 7% of our total net sales during 2009, compared to 5% during 2008, the increase directly related to the increase in the ratio of our fixed to variable SG&A costs as net sales decreased.

        We recorded expense of $3.0 million during 2009, and $61.7 million, or 8.3% of consolidated pretax earnings, during 2008, related to our Steel Dynamics performance-based profit sharing plan allocation. The plan's contribution percentage consists of 2% of consolidated pretax earnings plus a unique percentage of each of our operating segments' pretax earnings. Our steel operations segment earned a profit sharing contribution during 2009 in spite of our consolidated pretax loss during the year, due to that segment's individual profitability. During 2009 and 2008, we recorded additional profit sharing expense of $732,000 and $5.3 million, respectively, related to certain subsidiaries whose employees did not participate in the aforementioned plan.

        Amortization of intangible assets increased $12.2 million, or 30%, during 2009 compared to 2008. This increase includes $6.2 million of additional amortization due to the finalization of finite-lived intangible asset valuations related to the acquisition of Recycle South.

        Interest Expense, net Capitalized Interest.    During 2009, gross interest expense decreased $117,000 to $162.3 million and capitalized interest increased $3.1 million to $20.9 million, when compared to 2008. The interest capitalization that occurred during these periods resulted from the interest required to be capitalized with respect to construction activities at our various operating segments. We currently anticipate gross interest expense to remain comparable for 2010.

        Other Income, net Other Expense.    Other income, net other expense was $3.6 million during 2009, as compared to $33.1 million during 2008. During 2008, other income of $20.2 million was primarily

48


Table of Contents


attributable to earnings from investments in metals recycling entities which were accounted for under the equity method of accounting. Recycle South, which was $20.4 million of other income during 2008, is no longer included in these earnings, as its post-acquisition results are consolidated in our financial statements. In addition, we also realized gains on sales of marketable securities during 2008 of $8.6 million.

        Income Taxes.    During 2009, our income tax benefit was $7.2 million, as compared to income tax expense of $280.4 million during 2008. Our effective income tax rate before noncontrolling interests was 39.6% and 38.2%, during 2009 and 2008, respectively. We account for income taxes and the related accounts under the liability method. Deferred tax liabilities and assets are determined based on the difference between the financial statement and tax basis of assets and liabilities using enacted rates expected to be in effect during the year in which the basis differences reverse.

        Included in the balance of unrecognized tax benefits at December 31, 2009 are potential benefits of $20.3 million that, if recognized, would affect our effective tax rate. We recognize interest and penalties related to our tax contingencies on a net-of-tax basis in income tax expense. During 2009, we recognized interest expense of $1.3 million, net of tax, and benefits from the reduction of penalties of $111,000. At December 31, 2009, we had $9.1 million accrued for the payment of interest and penalties.

        We file income tax returns in the U.S. federal jurisdiction as well as income tax returns in various state jurisdictions. The Internal Revenue Service (IRS) is currently examining our federal income tax returns for the years 2004 through 2007. At this time we do not expect to have any significant examination adjustments that would result in a material change to our financial position or results of operations. The state of Indiana completed its examination of the calendar years 2000 through 2005 in the third quarter of 2008. The total tax paid to settle the examinations was $20.7 million. This amount was included in the balance of the unrecognized tax benefits recorded when we adopted FIN 48 on January 1, 2007. It is reasonably possible that the amount of unrecognized tax benefits could change in the next twelve months as a result of state and federal income tax audits. Based on the current audits in process, the payment of taxes as a result of audit settlements could be in an amount from zero to $3.9 million by the end of 2010. With few exceptions, we are no longer subject to federal, state and local income tax examinations by tax authorities for years ended before 2006.

Consolidated Results 2008 vs. 2007

        Net income was $463.4 million, or $2.38 per diluted share, during 2008, compared with $394.6 million, or $2.01 per diluted share, during 2007. Our gross margin percentage was 15% and 21% during 2008 and 2007, respectively. The decrease in our gross margin percentage during 2008 was most significantly related to the impact of the severe economic downturn on our operations during the fourth quarter of 2008. However, our acquisitions of The Techs in July 2007 and OmniSource in October 2007, both lower margin businesses when compared to our steelmaking operations, also impacted our 2008 gross margins as both operations were included for the first full year during 2008. For the first three quarters of 2008, before the fourth quarter severe decline, our gross margin was 19%. Our gross margin percentage during the fourth quarter of 2008 was a negative 3% compared to a positive 19% during the first nine months of the year.

        Gross Profit.    During 2008, our net sales increased $3.7 billion, or 84%, to $8.1 billion. While shipping volumes increased modestly during 2008 in our steel operations, due to the full-year inclusion of The Techs acquisition in 2008, our metals recycling and ferrous resources operating segment experienced a significant increase in volumes compared to 2007 because of the full-year inclusion of OmniSource operations, as well as the acquisition of Recycle South in June 2008. Our steel fabrication segment also experienced modest gains in shipping volumes during 2008.

49


Table of Contents

        Selling, General and Administrative Expenses.    Selling, general and administrative expenses (including profit sharing and amortization of intangible assets) were $384.9 million during 2008, as compared to $224.9 million during 2007, an increase of $160.0 million, or 71%. Our selling, general and administrative expenses represented 5% of our total net sales during both 2008 and 2007.

        We recorded expense of $61.7 million and $50.2 million during 2008 and 2007, respectively, related to our Steel Dynamics performance-based profit sharing plan allocation. During 2008 the company's board of directors modified the contribution percentage for this plan to consist of 2% of consolidated pretax earnings plus a unique percentage of each of the company's operating segments' pretax earnings. The resulting total contribution percentage was 8.3% of consolidated pretax earnings during 2008. The plan allocation was calculated on 8.0% of pretax earnings during 2007. During 2008 and 2007, respectively, we recorded additional profit sharing expense of $5.3 million and $8.3 million, related to certain subsidiaries whose employees did not participate in the aforementioned plan.

        Amortization of intangible assets increased $29.4 million, or 245%, during 2008 compared to 2007. This increase reflects the addition of finite-lived intangible assets associated with the acquisitions of OmniSource and Recycle South.

        Interest Expense, net Capitalized Interest.    During 2008, gross interest expense increased $93.3 million, or 135%, to $162.4 million and capitalized interest increased $4.1 million to $17.8 million, when compared to 2007. This increase in interest expense was due to increased debt levels of $620.5 million. The interest capitalization that occurred during these periods resulted from the interest required to be capitalized with respect to construction activities at our various operating segments, most significantly at our Structural and Rail Division related to the addition of a second rolling mill and second caster.

        Other Income, net Other Expense.    Other income, net other expense was $33.1 million during 2008, as compared to other expense, net other income of $5.5 million during 2007. During 2008, other income of $20.2 million was attributable to earnings from investments in scrap procurement and processing entities which were accounted for under the equity method of accounting. As of the date of its acquisition, Recycle South, which was $20.4 million of other income during 2008, is no longer included in these earnings, as its results are consolidated in our financial statements after acquisition. In addition, we also realized gains on sales of marketable securities during 2008 of $8.6 million. During 2007, other income was offset by $7.1 million of call premium expense associated with the redemption of our 91/2% senior notes and the termination of a related fixed-to-floating interest rate swap which resulted in a $5.0 million loss on hedging activities.

        Income Taxes.    During 2008, our income tax provision was $280.4 million, as compared to $235.7 million during 2007. Our effective income tax rate before noncontrolling interests was 38.2% and 37.4% during 2008 and 2007, respectively. We account for income taxes and the related accounts under the liability method. Deferred tax liabilities and assets are determined based on the difference between the financial statement and tax basis of assets and liabilities using enacted rates expected to be in effect during the year in which the basis differences reverse.

Liquidity and Capital Resources

        Our business is capital intensive and requires substantial expenditures for, among other things, the purchase and maintenance of equipment used in our steelmaking and finishing operations and to remain in compliance with environmental laws. Our short-term and long-term liquidity needs arise primarily from capital expenditures, working capital requirements and principal and interest payments related to our outstanding indebtedness. We have met these liquidity requirements with cash provided by operations, issuances of common stock, long-term borrowings and state and local grants.

50


Table of Contents

        Working Capital.    During 2009, our operational working capital position, representing our cash invested in trade receivables and inventories less trade payables and accruals decreased $134.4 million to $852.0 million compared to December 31, 2008. Trade receivables decreased $76.3 million, or 15%, during 2009 to $426.6 million, of which more than 97% were current or less than 60 days past due. Our largest customer is an affiliated company, Heidtman Steel, which represented 6% and 10% of our outstanding trade receivables at December 31, 2009 and 2008, respectively. Trade receivables declined during 2009 due to decreased shipping volumes and product prices. Total inventories decreased $170.4 million, or 17%, to $852.8 million, with volumes of work-in-process and finished goods inventories increasing 37,000 net tons, or 11%. More specifically, raw materials inventories represented $149.0 million of the decrease during 2009, primarily due to reductions in our steel scrap values. Steel scrap inventory volumes decreased 496,000 gross tons during 2009. Our trade payables and general accruals decreased $112.4 million, or 21%, during 2009. This is a reflection of the slowdown in our production process during 2009, as well as the significant decrease of $59.7 million in our profit sharing accrual compared with 2008.

        Capital Investments.    During 2009, we invested $330.1 million in property, plant and equipment, of which $20.6 million related primarily to the addition of a second rolling mill and caster at our Structural and Rail Division, $26.1 million related to metals recycling operations and $223.8 million related to the construction of Mesabi Nugget, our planned iron-nugget manufacturing facility and related mining operations. The other capital expenditures of $59.6 million primarily represented expansion and maintenance projects at our other facilities. We believe these capital investments will benefit our net sales and related cash flows as each project reaches completion and attains appropriate operational metrics.

        Capital Resources and Long-term Debt.    During 2009, our total outstanding debt decreased $427.6 million to $2.2 billion, primarily because we prepaid our term A loan of $552.0 million in June 2009 through the net proceeds from the concurrent issuance of common stock and 5.125% senior convertible notes, due 2014. Our total long-term debt to capitalization ratio, representing our long-term debt, including current maturities divided by the sum of our long-term debt and our total stockholders' equity, was 53% and 62% at December 31, 2009 and 2008, respectively. At December 31, 2009, there were outstanding borrowings of $167.0 million under our $874.0 million senior secured revolver, which is subject to a monthly borrowing base.

51


Table of Contents

        Cash Dividends.    We declared cash dividends of $66.7 million, or $.325 per share, during 2009; $75.2 million, or $.40 per share, during 2008; and $55.6 million, or $.30 per share during 2007. We paid cash dividends of $68.7 million, $71.3 million, and $55.6 million during 2009, 2008 and 2007, respectively. Our board of directors, along with executive management, approves the payment of dividends on a quarterly basis. The board of directors, during the second quarter of 2009, declared a dividend of $.075 per common share, a decrease from the $.10 declared in the first quarter in a direct response to the prolonged economic downturn and the importance of maintaining liquidity. A dividend of $.075 per common share was again declared during the third and fourth quarters. During 2010 we anticipate maintaining our current level of quarterly dividends; however, the determination to pay cash dividends in the future will be at the discretion of our board of directors, after taking into account various factors, including our financial condition, results of operations, outstanding indebtedness, current and anticipated cash needs and growth plans. In addition, the terms of our senior secured revolving credit agreement and the indenture relating to our senior notes restrict the amount of cash dividends we can pay.

        Two-for-One Stock Split.    Our board of directors authorized a two-for-one stock split, effective for stockholders of record at the close of business on March 19, 2008, and increased our authorized

52


Table of Contents


common shares from 200 million with a par value of $.005 per common share to 900 million shares (with the approval of shareholders on May 21, 2008) with a par value of $.0025 per common share. All prior period share and per share amounts have been adjusted to reflect the stock split.

        Other.    Our ability to meet our debt service obligations and reduce our total debt will depend upon our future performance which, in turn, will depend upon general economic, financial and business conditions, along with competition, legislation and regulatory factors that are largely beyond our control. In addition, we cannot assure you that our operating results, cash flow, access to credit markets and capital resources will be sufficient for repayment of our indebtedness in the future. We believe that based upon current levels of operations and anticipated growth, cash flow from operations, together with other available sources of funds, including additional borrowings under our senior secured credit agreement, will be adequate for the next twelve months for making required payments of principal and interest on our indebtedness, funding working capital requirements and anticipated capital expenditures.

Contractual Obligations and Other Long-Term Liabilities

        We have the following minimum commitments under contractual obligations, including purchase obligations, as defined by the U.S. Securities and Exchange Commission. A "purchase obligation" is defined as an agreement to purchase goods or services that is enforceable and legally binding and that specifies all significant terms, including fixed or minimum quantities to be purchased; fixed, minimum or variable price provisions; and the approximate timing of the transaction. Other long-term liabilities are defined as long-term liabilities that are reflected on our balance sheet under generally accepted accounting principles. Based on this definition, the following table includes only those contracts which include fixed or minimum obligations. It does not include normal purchases, which are made in the ordinary course of business. The following table provides aggregated information about outstanding contractual obligations and other long-term liabilities as of December 31, 2009 (in thousands):

 
  Payments Due By Period  
 
  Total   2010   2011 & 2012   2013 & 2014   2015 & After  

Long-term debt(1)

  $ 2,222,754   $ 168,182   $ 716,852   $ 302,657   $ 1,035,063  

Estimated interest payments on debt(2)

    667,419     150,475     279,466     170,438     67,040  

Purchase obligations(3)

    57,782     32,019     13,934     3,510     8,319  

Construction commitments(4)

    60,082     60,082              

Lease commitments

    48,146     13,091     19,282     10,242     5,531  

Other commitments(5)

    7,230     597     1,281     1,152     4,200  
                       
 

Total

  $ 3,063,413   $ 424,446   $ 1,030,815   $ 487,999   $ 1,120,153  
                       

(1)
The long-term debt payment information presented above assumes that our senior notes and convertible notes remain outstanding until maturity. Refer to Note 3 to the consolidated financial statements elsewhere in this report for additional information regarding our long-term debt. 2010 amounts represented in the table above include $167.0 million related to our senior secured revolver which does not mature until 2012; however, is classified as a current maturity due to our intention to repay this balance as free cash flow allows.

(2)
The estimated interest payments shown above assume interest rates of 73/8% on our $700 million senior unsecured notes due October 2012; 5.125% on our $287.5 million convertible senior notes due June 2014; 63/4% on our $500 million senior unsecured notes due April 2015; 73/4% on our $500 million senior unsecured notes due April 2016; 3.7% on our outstanding senior secured revolver; 4.2% on our Mesabi Nugget participation loan; and 5.2% on our other fixed rate debt of approximately $43.3 million.

53


Table of Contents

(3)
Purchase obligations include commitments we have for the purchase of natural gas and its transportation to be utilized within our production process. These arrangements have "take or pay" or other similar commitment provisions. We have fully utilized all such "take or pay" requirements during the past three years under these contracts.

(4)
Construction commitments relate to firm contracts we have with various vendors for the completion of certain construction projects at our various divisions at December 31, 2009.

(5)
Other commitments principally relate to certain pension and deferred compensation plan obligations.

(6)
We expect to make cash outlays in the future related to our unrecognized tax benefits; however, due to the uncertainty of the timing, we are unable to make reasonably reliable estimates regarding the period of cash settlement with the respective taxing authorities. Accordingly, unrecognized tax benefits and related interest and penalties of $58.7 million, as of December 31, 2009, have been excluded from the contractual obligations table above. Refer to Note 4 to the consolidated financial statements elsewhere in this report for additional information.

Other Matters

Inflation

        We believe that inflation has not had a material effect on our results of operations.

Environmental and Other Contingencies

        We have incurred, and in the future will continue to incur, capital expenditures and operating expenses for matters relating to environmental control, remediation, monitoring and compliance. During 2009, we incurred costs related to the monitoring and compliance of environmental matters in the amount of approximately $30.3 million and capital expenditures related to environmental compliance of approximately $5.4 million. Over 66% of the costs incurred during 2009 for monitoring and compliance were related to the normal transportation of certain types of waste produced in the steelmaking process in accordance with legal requirements. We incurred combined environmental remediation costs of approximately $590,000 at all of our facilities during 2009. We have an accrual of $200,000 recorded as a contingency for environmental remediation related to our OmniSource subsidiary and $3.0 million related to Mesabi Nugget. We believe, apart from our dependence on environmental construction and operating permits for our existing and proposed manufacturing facilities, that compliance with current environmental laws and regulations is not likely to have a materially adverse effect on our financial condition, results of operations or liquidity; however, environmental laws and regulations have changed rapidly in recent years, and we may become subject to more stringent environmental laws and regulations in the future, such as the impact of United States government or various governmental agencies introducing regulatory changes in response to the potential of climate change.

Recent Accounting Pronouncements and Developments

        In Note 1 to our consolidated financial statements, we discuss new accounting policies adopted by Steel Dynamics during 2009 and the expected financial impact of accounting policies recently issued or proposed but not yet required to be adopted.

Critical Accounting Policies and Estimates

        Management's discussion and analysis of our financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. We review the accounting policies we

54


Table of Contents


use in reporting our financial results on a regular basis. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses and related disclosure of contingent assets and liabilities. We evaluate the appropriateness of these estimations and judgments on an ongoing basis. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Results may differ from these estimates due to actual outcomes being different from those on which we based our assumptions. We believe the following critical accounting policies affect our more significant judgments and estimates used in the preparation of our consolidated financial statements.

        Revenue Recognition and Allowance for Doubtful Accounts.    Except for our steel fabrication operations segment, we recognize revenues from sales and the allowance for estimated costs associated with returns from these sales when the title of the product transfers upon shipment. Provision is made for estimated product returns and customer claims based on estimates and actual historical experience. If the historical data used in our estimates does not reflect future returns and claims trends, additional provision may be necessary. Our steel fabrication operations segment recognizes revenues from construction contracts using a percentage of completion methodology based on steel tons used on completed units to-date as a percentage of estimated total steel tons required by each contract. Steel fabrication operations accounted for 4% of our 2009 net sales.

        We are exposed to credit risk in the event of nonpayment by our customers, which are principally intermediate steel processors and service centers that sell our products to numerous industry sectors, including the automotive, construction, commercial, transportation and industrial machinery markets. We maintain an allowance for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments based on known credit risks, historical loss experience and current economic conditions affecting our customers. We mitigate our exposure to credit risk by performing ongoing credit evaluations and taking further action when necessary, such as requiring letters of credit or other security interests to support the receivable from our customer. If the financial condition of our customers were to deteriorate, resulting in the impairment of their ability to make payments, additional allowance may be required.

        Inventories.    We record inventories at lower of cost or market. Cost is determined principally on a first-in, first-out, basis.

        Impairments of Long-Lived Tangible and Finite-Lived Intangible Assets.    We review long-lived assets for impairment whenever events or changes in circumstances indicate the carrying amount of such assets may not be recoverable. Impairment losses are recorded on long-lived assets used in operations when indicators of impairment are present and the undiscounted cash flows estimated to be generated by those assets are less than the assets' carrying amounts. The impairment loss is measured by comparing the fair value of the asset to its carrying amount.

        Goodwill and Other Indefinite-Lived Intangible Assets.    At least once annually or when indicators of impairment exist, we perform an impairment test for goodwill and other indefinite-lived intangible assets. Goodwill is allocated to various reporting units, which are generally one level below our operating segments. We utilize a two-stepped approach to measuring goodwill impairment. The first step of the test determines if there is potential goodwill impairment. In this step we compare the fair value of the reporting unit to its carrying amount (which includes goodwill). The fair value of the reporting unit is determined by using an estimate of future cash flows utilizing a risk-adjusted discount rate to calculate the net present value of future cash flows, and determining reasonableness by using comparable EBITDA multiples of peer companies. If the carrying amount exceeds the fair value, we perform the second step of the test, which measures the amount of impairment loss to be recorded, if any. In the second step, we compare the carrying amount of the goodwill to the implied fair value of

55


Table of Contents


the goodwill based on the net fair value of the recognized and unrecognized assets and liabilities of the reporting unit. If the implied fair value is less than the carrying value, an impairment loss is recorded to the extent that the fair value of the goodwill is less than its carrying value. Our other indefinite-lived intangible assets are related to trademarks acquired through various business combinations as follows, as of December 31, 2009 (in thousands):

The Techs

  $ 81,800  

OmniSource Corporation

    108,000  
       

  $ 189,800  
       

        We test indefinite-lived intangible assets for impairment through the comparison of the fair value of the specific intangible asset with its carrying amount. The fair value of the intangible asset is determined by using an estimate of future cash flows attributable to the asset and a risk-adjusted discount rate to compute a net present value of future cash flows. If the fair value is less than the carrying value, an impairment loss is recorded in an amount equal to the excess in carrying value.

        Deferred Tax Assets and Liabilities.    We are required to estimate our income taxes as a part of the process of preparing our consolidated financial statements. This requires us to estimate our actual current tax exposure together with assessing temporary differences resulting from differing treatments of items for tax and accounting purposes. These differences result in deferred tax assets and liabilities, which are included within our consolidated balance sheet. We must then assess the likelihood that our deferred tax assets will be recovered from future taxable income and, to the extent we believe that recovery is not likely, we must establish a valuation allowance.

ITEM 7A.    QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Market Risk

        In the normal course of business, we are exposed to interest rate changes. Our objectives in managing exposure to interest rate changes are to limit the impact of these rate changes on earnings and cash flows and to lower overall borrowing costs. To achieve these objectives, we primarily use interest rate swaps to manage net exposure to interest rate changes related to our portfolio of borrowings.

        The following table represents the principal cash repayments and related weighted-average interest rates by maturity date for our long-term debt as of December 31, 2009 (in thousands):

 
  Interest Rate Risk  
 
  Fixed Rate   Variable Rate  
 
  Principal   Average
Rate
  Principal   Average
Rate
 

Expected maturity date:

                         
 

2010

  $ 1,182     5.4 % $ 167,000     3.6 %
 

2011

    1,617     5.1     5,000     4.2  
 

2012

    705,235     7.3     5,000     4.2  
 

2013

    2,479     5.0     5,000     4.2  
 

2014

    290,178     5.1     5,000     4.2  
 

Thereafter

    1,030,064     7.2     4,999     4.2  
                       

Total

  $ 2,030,755     6.9 % $ 191,999     3.7 %
                       

Fair value

  $ 2,151,502         $ 191,999        
                       

56


Table of Contents

Commodity Risk

        In the normal course of business we are exposed to the market risk and price fluctuations related to the sale of steel products and to the purchase of commodities used in our production process, such as metallic raw materials, electricity, natural gas and alloys. Our risk strategy associated with product sales has generally been to obtain competitive prices for our products and to allow operating results to reflect market price movements dictated by supply and demand.

        Our risk strategy associated with the purchase of commodities utilized within our production process has generally been to make certain commitments with suppliers relating to future expected requirements for such commodities. Certain commitments contain provisions which require us to "take or pay" for specified quantities without regard to actual usage for periods of up to 24 months for physical commodity requirements and for up to 11 years for commodity transportation requirements. Our commitments for natural gas and its transportation with "take or pay" or other similar commitment provisions for the years ending December 31 are as follows (in thousands):

 

2010

  $ 32,019  
 

2011

    11,955  
 

2012

    1,979  
 

2013

    1,773  
 

2014

    1,737  

Thereafter

    8,319  
       

  $ 57,782  
       

        We fully utilized all such "take or pay" requirements during the past three years under these contracts. We believe that production requirements will be such that consumption of the products or services purchased under these commitments will occur in the normal production process. We also purchase electricity consumed at our Flat Roll Division pursuant to a contract which extends through December 2012. The contract designates 160 hours annually as "interruptible service" and establishes an agreed fixed-rate energy charge per Mill/kWh consumed for each year through the expiration of the agreement.

        In our metals recycling operations we have certain fixed price contracts with various customers and suppliers for future delivery of nonferrous metals. Our risk strategy has generally been to enter into base metal financial contracts with the goal to protect the profit margin, within certain parameters, that was contemplated when we entered into the transaction with the customer. At December 31, 2009, we had a cumulative unrealized loss associated with these financial contracts of $3.1 million all of which have a settlement date in 2010. We expect the customer contracts associated with the financial contracts to be fully consummated.

57


Table of Contents

ITEM 8.    CONSOLIDATED FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 
  Page  

Management's Report on Internal Control Over Financial Reporting

    59  

Report of Independent Registered Public Accounting Firm on Internal Control Over Financial Reporting

   
60
 

Report of Independent Registered Public Accounting Firm

   
61
 

Consolidated Balance Sheets as of December 31, 2009 and 2008

   
62
 

Consolidated Statements of Operations for each of the three years in the period ended December 31, 2009

   
63
 

Consolidated Statements of Stockholders' Equity for each of the three years in the period ended December 31, 2009

   
64
 

Consolidated Statements of Cash Flows for each of the three years in the period ended December 31, 2009

   
65
 

Notes to Consolidated Financial Statements

   
66
 

58


Table of Contents


MANAGEMENT'S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING

        The management of Steel Dynamics, Inc. is responsible for the preparation and integrity of the company's consolidated financial statements, establishing and maintaining adequate internal control over financial reporting for the company (including its consolidated subsidiaries) and all related information appearing in this Form 10-K. The company maintains accounting and internal control systems which are intended to provide reasonable assurance that assets are safeguarded against loss from unauthorized use or disposition, transactions are executed in accordance with management's authorization and accounting records are reliable for preparing financial statements in accordance with accounting principles generally accepted in the United States. We are dedicated to ensuring that we maintain the high standards of financial accounting and reporting that we have established. Our culture demands integrity and an unyielding commitment to strong internal practices and policies.

        Internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of the financial statements in accordance with U.S. generally accepted accounting principles; (3) provide reasonable assurance that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and (4) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on our financial statements.

        Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with policies and procedures may deteriorate.

        Under the supervision and with the participation of the company's management, including the Chief Executive Officer and Chief Financial Officer, the company conducted an evaluation of the effectiveness of its internal control over financial reporting as of December 31, 2009. The framework on which such evaluation was based is contained in the report entitled "Internal Control—Integrated Framework" issued by the Committee of Sponsoring Organizations of the Treadway Commission (the "COSO Report"). Based on that evaluation, management concluded that its internal control over financial reporting was effective as of December 31, 2009.

/s/ KEITH E. BUSSE

Chief Executive Officer
  /s/ THERESA E. WAGLER

Chief Financial Officer

59


Table of Contents


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
ON INTERNAL CONTROL OVER FINANCIAL REPORTING

To the Board of Directors and Stockholders of
Steel Dynamics, Inc.

        We have audited Steel Dynamics, Inc.'s internal control over financial reporting as of December 31, 2009, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). Steel Dynamic Inc.'s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management's Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the company's internal control over financial reporting based on our audit.

        We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

        A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.

        Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

        In our opinion, Steel Dynamics, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2009, based on the COSO criteria.

        We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Steel Dynamics, Inc. as of December 31, 2009 and 2008, and the related consolidated statements of operations, stockholders' equity, and cash flows for each of the three years in the period ended December 31, 2009 of Steel Dynamics, Inc. and our report dated February 22, 2010 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP
Indianapolis, Indiana
February 22, 2010

60


Table of Contents


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of
Steel Dynamics, Inc.

        We have audited the accompanying consolidated balance sheets of Steel Dynamics, Inc. as of December 31, 2009 and 2008, and the related consolidated statements of operations, stockholders' equity, and cash flows for each of the three years in the period ended December 31, 2009. These financial statements are the responsibility of the company's management. Our responsibility is to express an opinion on these financial statements based on our audits.

        We conducted our audits in accordance with standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

        In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Steel Dynamics, Inc. at December 31, 2009 and 2008, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2009, in conformity with U.S. generally accepted accounting principles.

        We also have audited in accordance with the standards of the Public Company Accounting Oversight Board (United States), Steel Dynamics, Inc.'s internal control over financial reporting as of December 31, 2009, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated February 22, 2010 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP
Indianapolis, Indiana
February 22, 2010

61


Table of Contents


STEEL DYNAMICS, INC.

CONSOLIDATED BALANCE SHEETS

(in thousands, except share data)

 
  December 31,  
 
  2009   2008  

Assets

             

Current assets

             
 

Cash and equivalents

  $ 9,008   $ 16,233  
 

Accounts receivable, net of related allowances of $20,674 and $29,008 as of December 31, 2009 and 2008, respectively

    396,036     453,011  
 

Accounts receivable-related parties

    30,556     49,921  
 

Inventories

    852,831     1,023,235  
 

Deferred income taxes

    21,492     23,562  
 

Tax refunds receivable

    137,024     86,321  
 

Other current assets

    9,856     57,632  
           
   

Total current assets

    1,456,803     1,709,915  

Property, plant and equipment, net

   
2,254,050
   
2,072,857
 

Restricted cash

    12,595     18,515  

Intangible assets, net of accumulated amortization of $98,610 and $47,634 as of December 31, 2009 and 2008, respectively

    533,510     614,786  

Goodwill

    758,259     770,438  

Other assets

    114,655     67,066  
           
   

Total assets

  $ 5,129,872   $ 5,253,577  
           

Liabilities and Stockholders' Equity

             

Current liabilities

             
 

Accounts payable

  $ 255,520   $ 259,742  
 

Accounts payable-related parties

    6,765     3,651  
 

Income taxes payable

    5,664     4,107  
 

Accrued expenses

    156,570     209,697  
 

Accrued profit sharing

    2,860     62,561  
 

Senior secured revolving credit facility, due 2012

    167,000     366,000  
 

Current maturities of long-term debt

    1,182     65,223  
           
   

Total current liabilities

    595,561     970,981  

Long-term debt

             
 

Senior secured term A loan, due 2012

        503,800  
 

73/8% senior notes, due 2012

    700,000     700,000  
 

5.125% convertible senior notes, due 2014

    287,500      
 

63/4% senior notes, due 2015

    500,000     500,000  
 

73/4% senior notes, due 2016

    500,000     500,000  
 

Other long-term debt

    67,072     15,361  
           
   

Total long-term debt

    2,054,572     2,219,161  

Deferred income taxes

   
416,468
   
365,496
 

Other liabilities

    60,006     65,626  

Commitments and contingencies

             

Stockholders' equity

             
 

Common stock voting, $.0025 par value; 900,000,000 shares authorized; 252,589,627 and 218,733,363 shares issued; and 215,999,801 and 181,820,012 shares outstanding, as of December 31, 2009 and 2008, respectively

    629     545  
 

Treasury stock, at cost; 36,589,826 and 36,913,351 shares, as of December 31, 2009, and 2008, respectively

    (730,857 )   (737,319 )
 

Additional paid-in capital

    972,985     541,686  
 

Other accumulated comprehensive loss

        (1,411 )
 

Retained earnings

    1,745,511     1,820,385  
           
   

Total Steel Dynamics, Inc. stockholders' equity

    1,988,268     1,623,886  
 

Noncontrolling interests

    14,997     8,427  
           
   

Total stockholders' equity

    2,003,265     1,632,313  
           
   

Total liabilities and stockholders' equity

  $ 5,129,872   $ 5,253,577  
           

See notes to consolidated financial statements.

62


Table of Contents


STEEL DYNAMICS, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

(in thousands, except per share data)

 
  Years Ended December 31,  
 
  2009   2008   2007  

Net sales

                   
 

Unrelated parties

  $ 3,810,378   $ 7,743,251   $ 4,158,844  
 

Related parties

    148,428     337,270     225,705  
               
   

Total net sales

    3,958,806     8,080,521     4,384,549  

Costs of goods sold

   
3,559,730
   
6,849,262
   
3,468,855
 
               
   

Gross profit

    399,076     1,231,259     915,694  

Selling, general and administrative expenses

   
223,013
   
276,560
   
151,274
 

Profit sharing

    2,980     66,997     61,703  

Amortization of intangible assets

    53,552     41,334     11,972  
               
   

Operating income

    119,531     846,368     690,745  

Interest expense, net capitalized interest

   
141,360
   
144,574
   
55,416
 

Other (income) expense, net

    (3,592 )   (33,147 )   5,500  
               
   

Income (loss) before income taxes

    (18,237 )   734,941     629,829  

Income taxes (benefit)

   
(7,218

)
 
280,427
   
235,672
 
               
   

Net income (loss)

    (11,019 )   454,514     394,157  

Net loss attributable to noncontrolling interests

   
(2,835

)
 
(8,872

)
 
(409

)
               
   

Net income (loss) attributable to Steel Dynamics, Inc

  $ (8,184 ) $ 463,386   $ 394,566  
               

Basic earnings (loss) per share attributable to Steel Dynamics, Inc. stockholders

 
$

(.04

)

$

2.45
 
$

2.12
 
               

Weighted average common shares outstanding

    200,704     189,140     186,321  
               

Diluted earnings (loss) per share attributable to Steel Dynamics, Inc. stockholders, including the effect of assumed conversions when dilutive

  $ (.04 ) $ 2.38   $ 2.01  
               

Weighted average common shares and share equivalents outstanding

    200,704     194,586     196,805  
               

Dividends declared per share

  $ .325   $ .400   $ .300  
               

Note: All prior period share data has been adjusted to reflect the company's two-for-one stock split effective March 2008.

See notes to consolidated financial statements.

63


Table of Contents


STEEL DYNAMICS, INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY

(in thousands)

 
  Shares    
   
   
  Other
Accumulated
Comprehensive
Income (Loss)
   
   
   
 
 
  Common
Stock
  Additional
Paid-In
Capital
  Retained
Earnings
  Noncontrolling
Interests
  Treasury
Stock
   
 
 
  Common   Treasury   Total  

Balances at January 1, 2007

    193,967     21,764   $ 537   $ 367,772   $ 1,093,271   $   $ 1,424   $ (230,472 ) $ 1,232,532  

Issuance of common stock (net of expenses) and proceeds from exercise of stock options, including related tax effect

    2,040         5     29,441                     29,446  

Dividends declared

                    (55,641 )               (55,641 )

Contributions from noncontrolling investors

                            10,000         10,000  

Distributions to noncontrolling investors

                            (67 )       (67 )

Tax adjustment to noncontrolling interests

                            90         90  

Equity-based compensation

    147     (147 )       6,691                 1,382     8,073  

Conversion of subordinated 4.0% notes

    58     (58 )       (595 )               845     250  

Acquisition of business

    19,400     (19,400 )       150,496                   304,531     455,027  

Purchase of treasury stock

    (25,288 )   25,288                         (533,654 )   (533,654 )

Comprehensive income:

                                                       
 

Net income

                    394,566         (409 )       394,157  
 

Unrealized gain on available-for-sale securities

                        21             21  
                                                       

Total comprehensive income

                                                    394,178  
                                       

Balances at December 31, 2007

    190,324     27,447     542     553,805     1,432,196     21     11,038     (457,368 )   1,540,234  

Issuance of common stock (net of expenses) and proceeds from exercise of stock options, including related tax effect

    962         3     18,419                     18,422  

Dividends declared

                    (75,197 )               (75,197 )

Contributions from noncontrolling investors

                            5,000         5,000  

Tax adjustment to noncontrolling interests

                            1,261         1,261  

Equity-based compensation

    136     (136 )       11,965                 2,313     14,278  

Conversion of subordinated 4.0% notes

    8,762     (8,762 )       (114,895 )               152,145     37,250  

Acquisition of business

    3,938     (3,938 )       72,392                 67,368     139,760  

Purchase of treasury stock

    (22,302 )   22,302                         (501,777 )   (501,777 )

Comprehensive income:

                                                       
 

Net income

                    463,386         (8,872 )       454,514  
 

Reversal of unrealized gain upon sale of available-for-sale securities

                        (21 )           (21 )
 

Unrealized loss on interest rate swap, net of tax of $883

                        (1,411 )           (1,411 )
                                                       

Total comprehensive income

                                                    453,082  
                                       

Balances at December 31, 2008

    181,820     36,913     545     541,686     1,820,385     (1,411 )   8,427     (737,319 )   1,632,313  

Issuance of common stock (net of expenses) and proceeds from exercise of stock options, including related tax effect

    33,857         84     420,846                     420,930  

Dividends declared

                    (66,690 )               (66,690 )

Contributions from noncontrolling investors

                            5,000         5,000  

Change in noncontrolling investment

                            2,366         2,366  

Tax adjustment to noncontrolling interests

                            2,039         2,039  

Equity-based compensation

    323     (323 )       10,453                 6,462     16,915  

Comprehensive loss:

                                                       
 

Net loss

                    (8,184 )       (2,835 )       (11,019 )
 

Reversal of unrealized loss on interest rate swap, net of tax $883

                        1,411             1,411  
                                                       

Total comprehensive loss

                                                    (9,608 )
                                       

Balances at December 31, 2009

    216,000     36,590   $ 629   $ 972,985   $ 1,745,511   $   $ 14,997   $ (730,857 ) $ 2,003,265  
                                       

See notes to consolidated financial statements. All prior period share data adjusted for two-for-one stock split effective March 2008.

64


Table of Contents


STEEL DYNAMICS, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands)

 
  Years Ended December 31,  
 
  2009   2008   2007  

Operating activities:

                   
 

Net income (loss), attributable to Steel Dynamics, Inc. 

  $ (8,184 ) $ 463,386   $ 394,566  
 

Adjustments to reconcile net income (loss) attributable to Steel Dynamics, Inc. to net cash provided by operating activities:

                   
   

Depreciation and amortization

    221,426     208,752     138,136  
   

Unamortized bond premium

            (3,350 )
   

Equity-based compensation

    17,589     14,278     8,073  
   

Deferred income taxes

    92,596     31,306     12,665  
   

Loss on disposal of property, plant and equipment

    839     557     551  
   

Noncontrolling interests

    (2,835 )   (8,872 )   (409 )
   

Changes in certain assets and liabilities:

                   
     

Accounts receivable

    72,159     310,985     57,653  
     

Inventories

    175,183     (18,667 )   (119,577 )
     

Other assets

    4,076     (155,810 )   (14,393 )
     

Accounts payable

    (8,860 )   (88,451 )   (48,835 )
     

Income taxes payable

    1,611     (21,765 )   (10,684 )
     

Accrued expenses

    (120,044 )   34,602     3,807  
               
       

Net cash provided by operating activities

    445,556     770,301     418,203  

Investing activities:

                   
 

Purchases of property, plant and equipment

    (330,052 )   (412,497 )   (395,198 )
 

Acquisitions of businesses, net of cash acquired

        (271,159 )   (848,071 )
 

Purchases of securities

        (20,373 )   (3,584 )
 

Sales of securities

        32,758      
 

Investment in direct financing lease

    (27,967 )        
 

Other investing activities

    (15,926 )   2,037     224  
               
       

Net cash used in investing activities

    (373,945 )   (669,234 )   (1,246,629 )

Financing activities:

                   
 

Issuance of current and long-term debt

    1,268,435     2,845,900     3,157,053  
 

Repayments of current and long-term debt

    (1,690,557 )   (2,402,033 )   (1,761,807 )
 

Issuance of common stock (net of expenses) and proceeds from exercise of stock options, including related tax effect

    420,930     18,422     29,446  
 

Purchases of treasury stock

        (501,777 )   (533,654 )
 

Contribution from noncontrolling investor

    5,000     5,000     10,000  
 

Dividends paid

    (68,672 )   (71,288 )   (55,642 )
 

Debt issuance costs

    (13,972 )   (7,544 )   (17,857 )
               
       

Net cash provided by (used in) financing activities

    (78,836 )   (113,320 )   827,539  
               

Decrease in cash and equivalents

   
(7,225

)
 
(12,253

)
 
(887

)

Cash and equivalents at beginning of year

    16,233     28,486     29,373  
               

Cash and equivalents at end of year

 
$

9,008
 
$

16,233
 
$

28,486
 
               

See notes to consolidated financial statements.

65


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Note 1. Description of the Business and Summary of Significant Accounting Policies

Description of the Business

        Steel Dynamics, Inc. (SDI), together with its subsidiaries (the company), is a domestic manufacturer of steel products and metals recycler. The company has three reporting segments: steel operations, metals recycling and ferrous resources operations and steel fabrication operations. Approximately 10% of the company's workforce is represented by collective bargaining agreements, and two of these agreements expire during 2010.

Steel Operations

        Steel operations include the company's Flat Roll Division, Structural and Rail Division, Engineered Bar Products Division, Roanoke Bar Division, Steel of West Virginia and The Techs operations. These operations consist of mini-mills, producing steel from steel scrap, using electric arc furnaces, continuous casting, automated rolling mills, and downstream finishing facilities. Steel operations accounted for 63%, 63% and 81% of the company's consolidated net sales during 2009, 2008 and 2007, respectively. The Flat Roll Division accounted for 28%, 24% and 32% of the company's consolidated net sales during 2009, 2008 and 2007, respectively.

        The Flat Roll Division sells a broad range of hot rolled, cold rolled and coated steel products, including a large variety of specialty products such as light gauge hot rolled, galvanized, and painted products. The Structural and Rail Division sells structural steel beams and pilings and is also designed to produce and sell a variety of rail for the railroad industry. The Engineered Bar Products Division primarily sells special bar quality and merchant bar quality rounds and round-cornered squares. The Roanoke Bar Division sells billets and merchant steel products, including angles, plain rounds, flats and channels. Steel of West Virginia primarily sells merchant beams, channels and specialty structural steel sections. The Techs was acquired in July 2007 and operates three galvanizing lines specializing in the galvanizing of specific types of flat rolled steels in non-automotive applications. The company's steel operations sell directly to end users and service centers. These products are used in numerous industry sectors, including the automotive, construction, commercial, transportation and industrial machinery markets.

Metals Recycling and Ferrous Resources Operations

        Metals recycling and ferrous resources operations include Iron Dynamics (IDI), the company's iron-substitute production facility, and the company's steel scrap procurement and processing locations, including OmniSource Corporation (OmniSource) operations, which were acquired in October 2007 and Recycle South, LLC (Recycle South) operations which were acquired in June 2008 (See Note 2). In addition, the impact related to the construction of the Mesabi Nugget iron-making facility and future mining operations in Hoyt Lakes, Minnesota, is also included in this segment. Metals recycling and ferrous resources operations accounted for 31%, 31% and 9% of the company's consolidated net sales during 2009, 2008 and 2007, respectively.

Steel Fabrication Operations

        Steel fabrication operations include the company's New Millennium Building System's plants located throughout the eastern United States. Revenues from these plants are generated from the fabrication of trusses, girders, steel joists and steel decking used within the non-residential construction

66


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)


industry. Steel fabrication operations accounted for 4%, 5% and 8% of the company's consolidated net sales during 2009, 2008 and 2007, respectively.

Summary of Significant Accounting Policies

Principles of Consolidation

        The consolidated financial statements include the accounts of SDI, together with its wholly and majority owned or controlled subsidiaries, after elimination of significant intercompany accounts and transactions. Noncontrolling interests represent the noncontrolling owner's proportionate share in the equity, income, or losses of the company's majority-owned or controlled consolidated subsidiaries.

Use of Estimates

        These financial statements are prepared in conformity with accounting principles generally accepted in the United States, and accordingly, include amounts that require management to make estimates and assumptions that affect the amounts reported in the financial statements and in the notes thereto. Significant items subject to such estimates and assumptions include the carrying value of property, plant and equipment, intangible assets and goodwill; valuation allowances for trade receivables, inventories and deferred income tax assets; potential environmental liabilities; and litigation claims and settlements. Actual results may differ from these estimates and assumptions.

Reclassifications

        Effective January 1, 2009, the company adopted current accounting guidance related to noncontrolling interests in consolidated financial statements (ASC 810-10-65-1). Accordingly, the company recast the presentation of minority interest or noncontrolling interests in the prior periods presented for the company's consolidated balance sheet, statement of operations and statement of cash flows.

Revenue Recognition and Allowances for Doubtful Accounts

        Except for the steel fabrication operations segment, the company recognizes revenues from sales and the allowance for estimated costs associated with returns from these sales at the time the title of the product transfers upon shipment. Provision is made for estimated product returns and customer claims based on estimates and actual historical experience. If the historical data used in the estimates does not reflect future returns and claims trends, additional provision may be necessary. The company's steel fabrication operations segment recognizes revenues from construction contracts using a percentage of completion methodology based on steel tons used on completed units to-date as a percentage of estimated total steel tons required by each contract. The allowance for doubtful accounts is based on the company's best estimate of probable credit losses, along with historical experience.

Cash and Equivalents

        Cash and equivalents include all highly liquid investments with a maturity of three months or less at the date of acquisition. Restricted cash is primarily funds held in escrow and deposits held at brokerage firms.

67


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)

Inventories

        Inventories are stated at lower of cost or market. Cost is determined principally on a first-in, first-out, basis. Inventory consisted of the following at December 31 (in thousands):

 
  2009   2008  

Raw materials

  $ 405,794   $ 554,815  

Supplies

    219,320     224,710  

Work in progress

    72,279     57,489  

Finished goods

    155,438     186,221  
           

  $ 852,831   $ 1,023,235  
           

Investments

        The company has investments in certain joint ventures and closely-held companies in which ownership varies between 49% and 50%. For these investments where the company does not have effective control, the company accounts for the investment on the equity basis. Investments in companies in which the company does not exercise control and its ownership is less than 20% are carried at cost. These investments are reflected in other long-term assets on the company's balance sheet in an amount of $25.3 million and $4.7 million at December 31, 2009 and 2008, respectively.

Property, Plant and Equipment

        Property, plant and equipment are stated at cost, which includes capitalized interest on construction-in-progress amounts, or at fair market value for those purchased through acquisitions, and is reduced by proceeds received from certain state and local government grants and other capital cost reimbursements. The company assigns each fixed asset a useful life ranging from 3 to 15 years for plant, machinery and equipment and 10 to 40 years for buildings and improvements. Repairs and maintenance are expensed as incurred. Depreciation is provided utilizing the straight-line depreciation methodology or the units-of-production depreciation methodology, based on units produced, subject to a minimum and maximum level. Depreciation expense was $158.9 million, $161.8 million and $126.6 million for the years ended December 31, 2009, 2008 and 2007, respectively. The company's property, plant and equipment at December 31 consisted of the following (in thousands):

 
  2009   2008  

Land and improvements

  $ 243,062   $ 213,478  

Buildings and improvements

    447,922     403,758  

Plant, machinery and equipment

    2,401,470     2,112,040  

Construction in progress

    190,614     256,563  
           

    3,283,068     2,985,839  

Less accumulated depreciation

    1,029,018     912,982  
           
 

Property, plant and equipment, net

  $ 2,254,050   $ 2,072,857  
           

68


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)

Intangible Assets

        The company's intangible assets, at December 31, consisted of the following (in thousands):

 
  2009   2008   Useful Life   Weighted Average
Amortization Period

Customer and scrap generator relationships

  $ 408,400   $ 418,900   10 to 25 years   20 years

Trademarks

    189,800     189,800   Indefinite  

Trademarks

    19,700     51,000   4 to 12 years   12 years

Other

    14,220     2,720   3 months to 6 years   5 years
                 

    632,120     662,420        

Less accumulated amortization

    98,610     47,634        
                 

  $ 533,510   $ 614,786        
                 

        The company utilizes an accelerated amortization methodology for customer and scrap generator relationships in order to follow the pattern in which the economic benefits of the amounts are anticipated to be consumed. Finite-lived trademarks are amortized using a straight line methodology. Amortization of intangible assets was $52.4 million, $39.9 million, and $5.9 million for the years ended December 31, 2009, 2008 and 2007, respectively. Estimated amortization expense, related to amortizable intangibles, for the years ending December 31 is as follows (in thousands):

2010

  $ 44,269  

2011

    38,347  

2012

    34,258  

2013

    30,476  

2014

    26,090  

Thereafter

    170,270  
       
 

Total

  $ 343,710  
       

Impairment of Long-Lived Tangible and Finite-Lived Intangible Assets

        The company reviews long-lived assets for impairment whenever events or changes in circumstances indicate the carrying amount of such assets may not be recoverable. Impairment losses are recorded on long-lived assets used in operations when indicators of impairment are present and the undiscounted cash flows estimated to be generated during the life of those assets are less than the assets' carrying amounts. The impairment loss is measured by comparing the fair value of the asset to its carrying amount.

69


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)

Goodwill

        The company's goodwill is allocated to the following reporting units at December 31, (in thousands):

 
  2009   2008  

OmniSource

  $ 584,510   $ 596,689  

The Techs

    142,783     142,783  

Roanoke Bar Division

    29,041     29,041  

New Millennium Building Systems

    1,925     1,925  
           

  $ 758,259   $ 770,438  
           

Impairment of Goodwill and Indefinite-Lived Intangible Assets

        At least once annually or when indicators of impairment exist, the company performs an impairment test for goodwill and other indefinite-lived intangible assets. Goodwill is allocated to various reporting units, which are generally one level below the company's operating segments. The company utilizes a two-stepped approach to measuring goodwill impairment. The first step of the test determines if there is potential goodwill impairment. In this step the company compares the fair value of the reporting unit to its carrying amount (which includes goodwill). The fair value of the reporting unit is determined by using an estimate of future cash flows utilizing a risk-adjusted discount rate to calculate the net present value of future cash flows, and determining reasonableness by using comparable EBITDA multiples of peer companies. If the carrying amount exceeds the fair value, the company performs the second step of the test, which measures the amount of impairment loss to be recorded, if any. In the second step, the company compares the carrying amount of the goodwill to the implied fair value of the goodwill based on the net fair value of the recognized and unrecognized assets and liabilities of the reporting unit. If the implied fair value is less than the carrying value, an impairment loss is recorded to the extent that the fair value of the goodwill is less than its carrying value.

        The company tests indefinite-lived intangible assets for impairment through the comparison of the fair value of the specific intangible asset with its carrying amount. The fair value of the intangible asset is determined by using an estimate of future cash flows attributable to the asset and a risk-adjusted discount rate to compute a net present value of future cash flows. If the fair value is less than the carrying value, an impairment loss is recorded in an amount equal to the excess in carrying value.

70


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)


Earnings (Losses) Per Share

        Basic earnings (losses) per share is based on the weighted average shares of common stock outstanding during the period. Diluted earnings per share assumes the weighted average dilutive effect of common share equivalents outstanding during the period applied to the company's basic earnings per share. Common share equivalents represent potentially dilutive stock options and dilutive shares related to the company's convertible subordinated debt and are excluded from the computation in periods in which they have an anti-dilutive effect. Options to purchase 2.1 million shares and 2.8 million shares were anti-dilutive at December 31, 2009 and 2008, respectively. No options were excluded at December 31, 2007. Due to the company's net loss for the year ended December 31, 2009, the computation of diluted net loss per share did not include the after-tax equivalent of interest of $5.0 million for the company's 5.125% senior convertible notes, due 2014 and the related weighted average equivalent of 8.4 million shares.

        The following table presents a reconciliation of the numerators and the denominators of the company's basic and diluted earnings (losses) per share computations for the years ended December 31 (in thousands, except per share data):

 
  2009  
 
  Net Loss
(Numerator)
  Shares
(Denominator)
  Per Share
Amount
 

Basic loss per share

  $ (8,184 )   200,704   $ (.04 )
 

Dilutive stock options

               
 

5.125% convertible senior notes

               
                 

Diluted loss per share

  $ (8,184 )   200,704   $ (.04 )
                 

 

 
  2008   2007  
 
  Net Income
(Numerator)
  Shares
(Denominator)
  Per Share
Amount
  Net Income
(Numerator)
  Shares
(Denominator)
  Per Share
Amount
 

Basic earnings per share

  $ 463,386     189,140   $ 2.45   $ 394,566     186,321   $ 2.12  
 

Dilutive stock options

        1,027               1,687        
 

4.0% convertible subordinated notes

    429     4,419           857     8,797        
                               

Diluted earnings per share

  $ 463,815     194,586   $ 2.38   $ 395,423     196,805   $ 2.01  
                               

Income Taxes

        The company accounts for income taxes and the related accounts under the liability method. Deferred tax liabilities and assets are determined based on the difference between the financial statement and tax bases of assets and liabilities using enacted rates expected to be in effect during the year in which the basis differences reverse.

Concentration of Credit Risk

        Financial instruments that potentially subject the company to significant concentrations of credit risk principally consist of temporary cash investments and accounts receivable. The company places its

71


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)


temporary cash investments with high credit quality financial institutions and limits the amount of credit exposure from any one institution. The company is exposed to credit risk in the event of nonpayment by customers. The company mitigates its exposure to credit risk, which it generally extends initially on an unsecured basis, by performing ongoing credit evaluations and taking further action if necessary, such as requiring letters of credit or other security interests to support the customer receivable. Management's estimation of the allowance for doubtful accounts is based upon known credit risks, historical loss experience and current economic conditions affecting the company's customers. Heidtman Steel Products (Heidtman), a related party, accounted for 6%, 10% and 6% of the company's net accounts receivable for the years ended December 31, 2009, 2008 and 2007, respectively.

Derivative Financial Instruments

        The company recognizes all derivatives as either assets or liabilities in the consolidated balance sheets and measures those instruments at fair value. Derivatives that are not designated as hedges must be adjusted to fair value through income. Changes in the fair value of derivatives that are designated as hedges, depending on the nature of the hedge, are recognized as either an offset against the change in fair value of the hedged balance sheet item in the case of fair value hedges or as other comprehensive income in the case of cash flow hedges, until the hedged item is recognized in earnings. The ineffective portion of a derivative's change in fair value is immediately recognized in earnings as other income or expense.

        In the normal course of business, the company has involvement with derivative financial instruments related to managing fluctuations in interest, foreign exchange rates, and forward contracts in various commodities. The company periodically employs interest rate swap and forward-rate agreements, and foreign currency exchange contracts as necessary. At the time of acquiring financial instruments, the company designates and assigns these instruments as hedges of specific assets, liabilities or anticipated transactions. When hedged assets or liabilities are sold or extinguished, or the anticipated transaction being hedged is no longer expected to occur, the company recognizes the gain or loss on the designated hedged financial instrument. The company enters into forward contracts in various commodities to reduce exposure to commodity related price fluctuations. These forward contracts do not meet hedging criteria and accordingly, the company recognizes the change in fair value related to these forward contracts in costs of goods sold. The company does not enter into derivative financial instruments for speculative purposes.

Equity-Based Compensation

        The company has several stock-based employee compensation plans which are more fully described in Note 6. Compensation expense for stock options is recorded over the vesting period using the fair value on the grant date, as calculated using the Black-Scholes model. Compensation expense for stock options was $13.2 million, $12.0 million, and $8.0 million for the years ended December 31, 2009, 2008, and 2007, respectively.

72


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)


Recent Accounting Pronouncements

        In June 2009, the Financial Accounting Standards Board (FASB) Accounting Standards Codification was issued. The standard established the Accounting Standards Codification as the single source of authoritative nongovernmental U.S. generally accepted accounting principles (GAAP), and is effective for interim and annual periods ending after September 15, 2009. The company has adopted the standard as of September 30, 2009. Other than the manner in which accounting guidance is referenced, the adoption had no impact on the company's financial statements.

        On January 1, 2009, the company adopted guidance issued by the FASB on fair value measurements as it relates to nonfinancial assets and nonfinancial liabilities that are not recognized or disclosed at fair value in the financial statements on at least an annual basis. The guidance defines fair value, establishes a framework for measuring fair value in GAAP, and expands disclosures about fair value measurements. The provisions of this standard apply to other accounting pronouncements that require or permit fair value measurements and are to be applied prospectively with limited exceptions. The adoption, as it relates to nonfinancial assets and nonfinancial liabilities, did not have a material impact on the company's financial statements for the year ended December 31, 2009. The provisions will be applied at such time a fair value measurement of a nonfinancial asset or nonfinancial liability is required, which may result in a fair value that is materially different than would have been calculated prior to the adoption.

        On January 1, 2009, the company adopted guidance issued by the FASB on disclosures about derivative instruments and hedging activities. The guidance requires enhanced disclosures about an entity's derivative and hedging activities, including (i) how and why an entity uses derivative instruments, (ii) how derivative instruments and related hedged items are accounted for, and (iii) how derivative instruments and related hedged items affect an entity's financial position, financial performance, and cash flows. Other than the required disclosures, the adoption had no impact on the company's financial statements.

        On January 1, 2009, the company adopted guidance issued by the FASB to establish accounting and reporting standards for the noncontrolling interest in a subsidiary and for the deconsolidation of a subsidiary. Noncontrolling interest, previously called a minority interest, is defined as the portion of equity in a subsidiary not attributable, directly or indirectly, to a parent. Guidance requires, among other items, that a noncontrolling interest be included in the consolidated balance sheets within equity separate from the parent's equity; consolidated net income to be reported at amounts inclusive of both the parent's and noncontrolling interest's shares and, separately, the amounts of consolidated net income attributable to the parent and noncontrolling interest all on the consolidated statements of income; and if a subsidiary is deconsolidated, any retained noncontrolling equity investment in the former subsidiary be measured at fair value and a gain or loss be recognized in net income based on such fair value. The presentation and disclosure requirements were applied retrospectively. The adoption did not have a material impact on the company's financial statements.

73


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)

        On January 1, 2009, the company adopted guidance issued by the FASB on business combinations, including that the purchase method be used for all business combinations and for an acquirer to be identified for each business combination. This standard defines the acquirer as the entity that obtains control of one or more businesses in the business combination and establishes the acquisition date as the date that the acquirer achieves control instead of the date that the consideration is transferred. In a business combination, including business combinations achieved in stages (step acquisition), the acquirer is required to recognize the assets acquired, liabilities assumed, and any noncontrolling interest in the acquiree at the acquisition date, measured at their fair values as of that date, with limited exceptions. It also requires the recognition of assets acquired and liabilities assumed arising from certain contractual contingencies as of the acquisition date, measured at their acquisition-date fair values. Additionally, it requires acquisition-related costs to be expensed in the period in which the costs are incurred and the services are received instead of including such costs as part of the acquisition price. The adoption did not have a material impact on the company's financial statements. For any future acquisitions, we expect the adoption will have an impact on the company's consolidated financial statements, however, the magnitude of the impact will depend on the nature, terms and size of the acquisition.

        On January 1, 2009, the company adopted guidance issued by the FASB on the determination of the useful life of intangible assets, which amends the factors that should be considered in developing renewal or extension assumptions used to determine the useful life of a recognized intangible asset under prior guidance in order to improve the consistency between the useful life of a recognized intangible asset and the period of expected cash flows used to measure the fair value of the asset. The adoption had no impact on the company's financial statements.

        On January 1, 2009, the company adopted guidance issued by the FASB on determining whether instruments granted in share-based payment transactions are participating securities, which states that unvested share-based payment awards that contain nonforfeitable rights to dividends or dividend equivalents (whether paid or unpaid) are participating securities and shall be included in the computation of earnings per share pursuant to the two-class method. The adoption had no impact on the company's financial statements.

        On June 30, 2009, the company adopted guidance issued by the FASB on subsequent events. It discusses management's assessment of subsequent events and incorporates this guidance into accounting literature. It is effective prospectively for interim and annual periods ending after June 15, 2009. The implementation of this standard did not have a material impact on the company's financial statements. The company has evaluated subsequent events through February 22, 2010, the date its consolidated financial statements were filed with the SEC.

Note 2. Acquisitions

Sturgis Iron & Metal

        On June 24, 2008, the company completed the acquisition of certain assets of Sturgis Iron & Metal, an operator of scrap collection and processing locations in Indiana, Michigan and Georgia. The assets were purchased for approximately $43.4 million in cash through bankruptcy proceedings and are operated as a part of OmniSource and reported in the company's metals recycling and ferrous resources segment. The company purchased the assets to continue its expansion of its metals recycling

74


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 2. Acquisitions (Continued)


operations and has begun operating three of the ten acquired locations. The company plans to begin operations at the remaining locations at some point in the future.

Recycle South

        On June 9, 2008, the company completed its acquisition of Recycle South, one of the nation's largest, privately-held, regional scrap metal recycling companies, headquartered in Spartanburg, South Carolina. OmniSource (which already owned 25% of Recycle South), acquired the remaining 75% equity interest for a purchase price of approximately $376.3 million. The company paid approximately $236.6 million in cash, including transaction costs, and issued 3,938,000 shares of Steel Dynamics, Inc. common stock valued at $139.8 million. In addition, the company assumed $144.9 million of net debt, of which approximately $142.8 million was repaid upon the closing of the acquisition. The cash portion of the acquisition was funded from the company's available cash which included proceeds from the issuance of the $500 million 73/4% senior notes due April 2016. The company valued the common stock issued at $35.49 per share based on the average stock price of the company's common stock during the two days before and after the date the acquisition was agreed to and announced (May 8, 2008). The company purchased Recycle South to expand its metals recycling business. Recycle South provides a significant presence in the southeastern United States through its 22 locations within North Carolina, South Carolina and Georgia. Recycle South's consolidated operating results have been reflected in the company's financial statements since June 9, 2008, in the metals recycling and ferrous resources reporting segment.

        The purchase price of $376.3 million for the remaining 75% equity interest in Recycle South, combined with the 25% interest already owned pursuant to the OmniSource acquisition, resulted in an aggregate purchase price of $501.8 million. Goodwill and intangible assets of $301.3 million and $126.0 million, respectively, were recorded as a result of the acquisition. The goodwill is deductible for tax purposes. During 2009 the company adjusted the initial purchase price allocation to reflect further refinement in the valuation of the acquisition. The final purchase price allocation below is based on actual acquisition costs and the fair value of the acquired assets, assumed liabilities and identifiable intangible assets (in thousands):

 
  December 31,
2008
  Adjustments   December 31,
2009
 

Current assets

  $ 213,513   $ (2,400 ) $ 211,113  

Property, plant and equipment, net

    94,484     5,322     99,806  

Intangible assets

    155,000     (29,000 )   126,000  

Goodwill

    272,355     28,978     301,333  

Other assets

    5,406     (926 )   4,480  
               
 

Total assets acquired

    740,758     1,974     742,732  
               

Current liabilities, excluding debt

    94,015     1,974     95,989  

Debt

    144,947         144,947  
               
 

Total liabilities assumed

    238,962     1,974     240,936  
               
 

Net assets acquired

  $ 501,796   $   $ 501,796  
               

75


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 2. Acquisitions (Continued)

        The identifiable intangible assets related to the acquisition consisted of the following (in thousands):

 
  Amount   Useful Life  

Customer relationships

  $ 21,000     20 years  

Scrap generator relationships

    77,000     20 years  

Trademarks

    16,000     3 years  

Covenants not to compete

    12,000     5 years  
             

  $ 126,000        
             

        The company utilizes an accelerated amortization methodology for customer and scrap generator relationships in order to follow the pattern in which the economic benefits of the intangible assets are anticipated to be consumed. Finite-lived trademarks and covenants not to compete are amortized using a straight line methodology. The related aggregate amortization expense recognized for the years ended December 31, 2009 and 2008 was $21.4 million and $5.0 million, respectively. The estimated intangible asset amortization expense related to the total acquisition of Recycle South for the next five years and thereafter follows (in thousands):

2010

  $ 16,483  

2011

    12,802  

2012

    10,620  

2013

    8,492  

2014

    6,095  

Thereafter

    45,138  
       
 

Total

  $ 99,630  
       

        Unaudited Pro Forma Information.    The following unaudited pro forma information is presented below as if the acquisition of Recycle South (effective on June 9, 2008) had occurred as of January 1, 2008 (in thousands, except per share amounts):

 
  Year Ended
December 31, 2008
 

Net sales

  $ 8,454,180  

Net income

    486,462  

Basic earnings per share, attributable to Steel Dynamics, Inc. stockholders

 
$

2.57
 

Diluted earnings per share, attributable to Steel Dynamics, Inc. stockholders

    2.50  

        The information presented above is for information purposes only and is not necessarily indicative of the actual results that could have occurred had the acquisition been consummated at January 1, 2008, nor is it necessarily indicative of future operating results of the combined companies under the ownership and management of the company. The actual results of Recycle South are included in the

76


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 2. Acquisitions (Continued)


consolidated results of the company as of its acquisition date. The pro forma results reflect the inclusion of the acquired operations of Recycle South for the year ended December 31, 2008.

Note 3. Long-Term Debt

        The company's borrowings consisted of the following at December 31 (in thousands):

 
  2009   2008  

Senior secured revolving credit facility, due 2012

  $ 167,000   $ 366,000  

Senior secured term A loan, due 2012

        568,200  

73/8% senior notes, due 2012

    700,000     700,000  

5.125% convertible senior notes, due 2014

    287,500      

63/4% senior notes, due 2015

    500,000     500,000  

73/4% senior notes, due 2016

    500,000     500,000  

Other secured obligations

    68,254     16,184  
           
 

Total debt

    2,222,754     2,650,384  
   

Less current maturities

    168,182     431,223  
           
 

Long-term debt

  $ 2,054,572   $ 2,219,161  
           

Senior Secured Credit Facility

        The company has a senior secured revolving credit facility of $874.0 million due June 2012 and is secured by substantially all of the company's and its wholly-owned subsidiaries' receivables and inventories and by pledges of all shares of the company's wholly-owned subsidiaries' capital stock. In June 2009, the company repaid its Term A loan of $552.0 million from the net proceeds of a concurrent issuance of common stock and $287.5 million of 5.125% convertible senior notes due 2014. Net proceeds received from the combined issuances were approximately $678.8 million. In conjunction with these offerings, the company also amended its senior secured credit agreement, increasing the facility pricing, while allowing for greater flexibility within the financial covenants during 2009 and 2010, among other things.

        The amended facility pricing grid is adjusted quarterly and is based on company's leverage of total debt to last-twelve—month's (LTM) adjusted EBITDA (earnings before interest, taxes, depreciation, amortization, and certain other non-cash transactions, as defined in the credit agreement). The minimum pricing is LIBOR plus 3.00% or Prime plus 1.00% and the maximum pricing is LIBOR plus 3.50% or Prime plus 1.50%. In addition the company is subject to an unused commitment fee of .50% which is applied to the unused portion of the $874.0 million revolver each quarter. At December 31, 2009, the weighted average interest rate of the company's outstanding borrowings under the senior secured credit facility was 3.6%.

        The company was in compliance with its financial covenants at December 31, 2009 and anticipates remaining in compliance during the next twelve months. The amended financial covenants are as follows:

77


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 3. Long-Term Debt (Continued)

        At December 31, 2009, the company had $683.1 million of availability on the senior secured revolver. The amendment also activated a monthly borrowing base requirement regarding the maximum availability for the $874.0 million senior secured revolver. At the end of each month, the company's revolver must be the lesser of:

        On November 4, 2008, the company entered into an interest rate swap agreement with a notional amount of $185.0 million pursuant to which the company agreed to receive LIBOR payments and make fixed rate payments of 2.21% on the twenty-eighth day of each month and was accounted for as a cash flow hedge. The interest rate swap was terminated in June 2009, in conjunction with the repayment of the company's Term A loan, and the deferred loss was reversed during 2009 as the future cash flows associated with the underlying item hedged (Term A loan) no longer existed. The fair value of the interest rate swap was a liability of $2.3 million at December 31, 2008.

73/8% Senior Notes

        On October 12, 2007, the company issued $700.0 million of non-callable 73/8% Senior Notes due 2012 (73/8% Notes). The net proceeds from the 73/8% Notes were used to finance the company's

78


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 3. Long-Term Debt (Continued)


acquisition of OmniSource and to repay a portion of the senior secured revolver amounts then outstanding.

        The 73/8% Notes have a maturity of five years and pay interest semi-annually on May 1 and November 1 of each year. Prior to November 1, 2010, the company may redeem up to 35% of the principal amount of the 73/8% Notes with the net cash proceeds of one or more sales of its common stock at a redemption price of 107.375%, provided that at least 65% of the aggregate principal amount of the 73/8% Notes originally issued remains outstanding after such redemption. The 73/8% Notes are equal in right of payment with all existing and future senior unsecured indebtedness and senior in right of payment to all subordinated indebtedness.

5.125% Convertible Senior Notes

        During June 2009, the company issued $287.5 million of 5.125% convertible senior notes due June 15, 2014. The net proceeds from these notes, along with the issuance of common stock was approximately $678.8 million and was used to prepay the term A loan on the senior secured credit facility as well as repay a portion of the company's revolving credit facility then outstanding.

        The 5.125% convertible senior notes due 2014 are non-callable for five years and bear interest at 5.125% payable semi-annually in arrears on June 15 and December 15 of each year, which began December 15, 2009. Note holders can convert the notes into the company's common stock at an initial conversion rate of 56.9801 per $1,000 principal amount of notes (16,381,779 shares). The conversion rate is fixed except for standard anti-dilution provisions. In addition, the notes may be redeemed on or after June 20, 2012, if the last reported sales price of the company's common stock for 20 or more trading days in a period of 30 consecutive trading days ending on the trading day prior to the date the company provides the notice of redemption to holders exceeds 130% of the applicable conversion price in effect on each such trading day, the company may redeem for cash all or part of the notes at a price equal to 100% of the principal amount of the notes to be redeemed, plus accrued and unpaid interest. The 5.125% convertible senior notes are equal in right of payment with all existing and future senior unsecured indebtedness and senior in right of payment to all subordinated indebtedness.

63/4% Senior Notes

        On April 3, 2007, the company issued $500.0 million of 63/4% Senior Notes due 2015 (63/4% Notes). The net proceeds from the 63/4% Notes were used for the following: to redeem the company's then existing $300.0 million 91/2% senior notes due March 2009 (91/2% Notes) at a redemption price of 102.375%; to repay amounts then outstanding under the company's senior secured revolving credit facility; and for general corporate purposes. In connection with the redemption of the 91/2% Notes, the company also terminated an underlying $200.0 million fair-value interest rate swap at an after-tax cost of $3.1 million, which was recognized in other expense as a loss on hedging activities during the second quarter of 2007. In addition, the company incurred the following: an after-tax expense of approximately $4.5 million related to the call premium, an after-tax benefit of approximately $2.1 million related to the recognition of the remaining unamortized bond premium, and an after-tax expense of approximately $1.4 million related to the write-off of previously capitalized financing costs.

        The 63/4% Notes have a maturity of eight years and pay interest semiannually on April 1 and October 1 of each year. The 63/4% Notes contain provisions that allow the company to redeem the

79


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 3. Long-Term Debt (Continued)


notes any time on or after April 1, 2011 at a redemption price of 103.375%, on or after April 1, 2012 at a redemption price of 101.688%, and on or after April 1, 2013 at 100.000%. The 63/4% Notes are in equal right of payment with all existing and future senior unsecured indebtedness and senior in right of payment to all subordinated indebtedness.

73/4% Senior Notes

        During April 2008, the company issued $500.0 million of 73/4% Senior Notes due 2016 (73/4% Notes). The net proceeds from the 73/4% Notes were used to repay amounts then outstanding under the company's senior secured revolving credit facility and for general corporate purposes, including the acquisition of Recycle South as described in Note 2.

        The 73/4% Notes have a maturity of eight years and pay interest semi-annually on April 15 and October 15 of each year. Prior to April 15, 2011, the company may redeem up to 35% of the principal amount of the 73/4% Notes with the net cash proceeds of one or more sales of its common stock at a redemption price of 107.750%. In addition, the company may redeem the 73/4% Notes at anytime after April 15, 2012 at a redemption price of 103.875%, on or after April 15, 2013 at a redemption price of 101.938%, and on or after April 15, 2014 at a redemption price of 100.000%. The 73/4% Notes are equal in right of payment with all existing and future senior unsecured indebtedness and senior in right of payment to all subordinated indebtedness.

Other Secured Obligations

        Other secured obligations of the company include the following.

        State and Local Government Municipal Bond Issues.    In November 1998, the company received $10.0 million from Whitley County, Indiana, representing proceeds from solid waste and sewage disposal revenue bonds to be used to finance certain solid waste and sewage disposal facilities. The bonds bear interest at 7.3%, with interest payable semi-annually and principal payments due through final maturity in November 2018. The outstanding principal balance was $7.6 million and $8.0 million, as of December 31, 2009 and 2008, respectively.

        Electric Utility Development Loans.    In April 2002, the company received $9.8 million from the Northeastern Rural Electric Membership Corporation (REMC) and Wabash Valley Power Association, Inc. to finance the company's portion of the cost to construct a transmission line and certain related facilities at the Structural and Rail Division. The loan bears interest at 8.1%, with monthly principal and interest payments required in amounts sufficient to amortize the transmission facility loan over a period of 20 years, with the unpaid principal due at the end of 10 years. The company established an unused $4.0 million stand-by letter of credit for the REMC agreement. The outstanding principal balance on the transmission facility loan was $7.7 million and $8.0 million as of December 31, 2009 and 2008, respectively.

        Mesabi Nugget Loan Participation.    Pursuant to the construction and financing of the Mesabi Nugget iron-nugget project, the company entered into a financing arrangement with Mesabi Nugget (a consolidated subsidiary), which is 81%-owned by the company and 19%-owned by Kobe Iron Nugget, LLC (Kobe). The two agreements provide Mesabi Nugget with a $20.0 million revolving credit facility and a $130.0 million term facility, in both agreements the company is the lender (with first lien

80


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 3. Long-Term Debt (Continued)


security rights on substantially all of Mesabi Nugget's assets) and Mesabi Nugget is the borrower. Under the term agreement the company sold and assigned to Kobe a 19% participation interest, for which Kobe provided $25.0 million, which is included in the company's consolidated other long term debt at December 31, 2009. The portion of the outstanding balance between the company and Mesabi Nugget are eliminated though consolidation. The weighted average interest rate at December 31, 2009 was 3.0%.

        Minnesota Economic Development State Loans.    Pursuant to the Mesabi Nugget project, during 2009 Mesabi Nugget received $23.9 million, with a current interest rate of 3.5%, of total committed funds of $26.5 million from various Minnesota state agencies for the construction and ultimate operation of the company's Mesabi Nugget project, which is located in Minnesota. Principal and interest payments are not required until certain production levels are met, as defined within the loan agreements. The company currently estimates payments may be required during the third quarter of 2011, based on current start-up levels.

Outstanding Debt Maturities

        The outstanding senior secured revolver balance of $167.0 million at December 31, 2009, is classified as a current liability on the company's balance sheet because the company generally uses its free cash flows to reduce the outstanding balance whenever possible. Maturities of outstanding debt, as of December 31, 2009, are as follows (in thousands):

2010

  $ 168,182  

2011

    6,617  

2012

    710,235  

2013

    7,479  

2014

    295,178  

Thereafter

    1,035,063  
       

  $ 2,222,754  
       

        The company capitalizes interest on all appropriate construction-in-progress assets. For the years ended December 31, 2009, 2008 and 2007, total interest costs incurred were $162.3 million, $162.4 million and $69.1 million, respectively, of which $20.9 million, $17.8 million and $13.7 million, respectively, were capitalized. Cash paid for interest was $156.2 million, $152.3 million and $56.4 million for the years ended December 31, 2009, 2008 and 2007, respectively.

Note 4. Income Taxes

        The company files a consolidated federal income tax return. Cash paid for taxes was $5.0 million, $341.5 million, and $208.0 million for the years ended December 31, 2009, 2008 and 2007, respectively.

81


Table of Contents


STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 4. Income Taxes (Continued)


The current and deferred federal and state income tax expense (benefit) for the years ended December 31 is as follows (in thousands):

 
  2009   2008   2007  

Current income tax expense (benefit)

  $ (96,140 ) $ 255,382   $ 223,030  

Deferred income tax expense

    88,922     25,045     12,642  
               
 

Total income tax expense (benefit)

  $ (7,218 ) $ 280,427   $ 235,672  
               

        A reconciliation of the statutory tax rates to the actual effective tax rates for the years ended December 31, are as follows:

 
  2009   2008   2007  

Statutory federal tax rate

    35.0 %   35.0 %   35.0 %
 

State income taxes, net of federal benefit

    1.9     4.4     4.3  
 

Other permanent differences

    2.7     (1.2 )   (1.9 )
               

Effective tax rate

    39.6 %   38.2 %   37.4 %
               

        Significant components of the company's deferred tax assets and liabilities at December 31 are as follows (in thousands):

 
  2009   2008  

Deferred tax assets

             
 

Capitalized start-up costs

  $ 29,784   $ 26,732  
 

Assets capitalized for tax, expensed for books

    18,552     17,842  
 

Accrued expenses

    35,465     35,513  
 

Other

    1,962      
           

Total deferred tax assets

    85,763     80,087  
           

Deferred tax liabilities

             
 

Property, plant and equipment

    (420,017 )   (361,785 )
 

Intangible assets

    (60,722 )   (52,525 )
 

Other

        (7,711 )